Computer fails after upgrading firmware HD

Similar Questions

• Remote access VPN fails after upgrading to 8.04

  Hello:

  Sorry if this has been posted, but I couldn't find it anywhere.

  After the upgrade of my 2 of my 5510 s to 8.04, my remote access VPN does not work. I can connect via Radius without problem. Once connected, I can't do anything on the network. When I try to telnet to any device, I get a white screen with no response. As it is to find the device but it does not. E-mail, intranet, nothing works. Seems to be time. I tried to upgrade to the latest version of Windows Client, still no go.

  Everyone knows this at all? Any help appreciated.

  TIA,

  Brad

  I saw the same problem after upgrading to 8.0.4. And it is caused by the "IP Compression" option enabled in group policy. After deactivation, it works. Cisco has just completed this bug recently:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu26649

  Zhenning

• Heel of workflow that wfstubbuildingmachine fails after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to build machines that call the workflow WFStubBuildingMachine heel. It worked correctly before the upgrade. If we remove this workflow, machines to build then OK, but since we have many elements which occur in vCO (annotations vCenter, created group, new machine name assigned, etc.) which are called by this stubworkflow, construction of machines without it are useless to use.

  
  

  Here are the 3 heel workflows that we have configured through custom properties. Note: We have not any assigned value, but never did before the upgrade either. I guess that a value is not required as long as you agree with vCAC pick up the latest rev of the workflow when it is running?
  

  

  
  

  After asking to build a machine that includes the WFStubBuildingMachine call, there eventually times out and the following error appears in the newspapers:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. We have removed this stubworkflow of plans by removing the custom property and machines very well build.
  3. We left the other stubworkflows in the plans and build machines very well as long as WFStubBuildingMachine is not present.
  4. We also have a problem with the designer after the 6.1 update. I have separately regarding who, as we do not know if it is related or not. It seems that it is maybe not related as the other stubworkflows works fine, but not this one. vCAC Designer (cloudutil.exe) will not start after the upgrade to 6.1
  5. We cannot use designer to crack open the WFStubBuildingMachine workflow, given that the designer is broken (see #4 above).
  6. Everything after upgrading to 6.1 seems to work very well. All of the tabs in the user interface are features. All services that you expect to be running are running on the devices and the server of IaaS. Decommissioning of machine for the "machines" or machines built without WFStubBuildingMachine work correctly, etc.
  7. vCAC 6.1 vCO plugin has been installed/updated. This problem existed before we did the update of the plugin vCO and persists thereafter.
  8. vCAC Workflow Hotfix Package has been applied. This problem existed before we did the update of the plugin vCO and persists thereafter. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2088838
  9. When the upgrade to 6.1, we chose the option "preserve my latest versions of workflow. The CLI via cloudutil.exe, we can see that it has added a new rev for the workflow of WfStubBuildingmachine 6.1 (8 Rev.), then copied to rev again as the last (rev 9). Our previous rev was 8 before the upgrade. Thus, it seems that it worked as expected.

  We are very down because of this. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  One thing we're curious to know, is if the workflow of personalization as shown in this post below vCO Mathilde be run after the upgrade from 6.01 to 6.1? We didn't as long as it has not listed in guides upgrade, documentation or blog posts, but just curious if someone else did so. We did not want to do this as it will scan what changes have been made to the stubworkflows before he does. http://www.vmtocloud.com/how-to-extend-Vcac-with-VCO-part-1-installation/

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to solve with the help of the support team to the development/vCAC:

  1. Open the designer Client.
  2. Load the workflow with the question, WFStubBuildingMachine in our case. Make sure that the latest rev is loaded.
  3. Find the block in the workflow where the issue is encountered. There should be a red exclamation point.
  4. Take a screenshot of the code block and note all code/functions/variables because you will need to recreate it in a later step.
  5. Right-click on the code block and delete it.
  6. Recreate the block in the workflow and to re - establish links with the rest of the workflow.
  7. Download the workflow of heel.
  8. Leave the customer from the designer.

  It seems than the 6.1 update do not recompile / adjust workflows to heel if they refer to the DLL that are upgraded as part of the upgrade process 6.1. Our workflow to heel was making reference to a dll that has been replaced by a newer version of the 6.1 update. Following the procedure above, recompiled the workflow with the new dll.

  It would be nice if the upgrade process vCAC traveled the workflows of heel and made for you or did you call at least. I hope it's something that will be considered for a future version.

• First HP: HP first does not start after upgrading firmware 20160414

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  I am able to download the firmware, but after that it just does not start.

  I have reinstalled the kit connection several times.

  I used the option "use the new method of update" in the connectivity kit. But it won't help. I tried to download older versions of firmware.

  I tried the factory reset options: A, F, key simmultaneously O and then with the reset on the back

  I tried the Apps, Esc, now.

  It just does not start.

  Any suggestions anyone?

  With sincere friendships.

  Sigurd

  Ziggy76 wrote:
  

  Hello world

  Yesterday, I tried to update the firmware of my first HP as the connectivity kit he advised. Now, the first does not start.  The only way I can get it to do something, is pressing the Symb key and reset at the back. It then enters the V16 recovery mode.

  ...................
  

  It just does not start.

  Any suggestions anyone?

  The suspect first IMO is win10. You are a brave man to make an update based on win10. Try to do this on a computer with 7 or 8.

  Some on this forum may say they made a correct update of the firmware with 10 victory.

  However, to win 10 is known to his problems with the drivers and the software which is not original ms or not correctly connected.

• Media Encoder fails after upgrade

  After the most recent media encoder upgrade, about a week and a half - everything I have queued to the encoder will fail.

  The same code parameters work fine directly from Premier Pro.

  I would use the ease of queues and do not have small parts of code one by one.

  Update/Fix it please?

  Could you try to clear the preferences of Media Encoder now shift and launching Media Encoder?

  If this does not help, you can delete all hide media.  "To do this, quit all Adobe applications and remove"hide media"and media Cache files" folders under the following path.

  Mac: ~/Library/Application Support/Adobe/Common

  Win: : \Users\\AppData\Roaming\Adobe\Common

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.

• Slow computer even after upgrading RAM

  Nice day

  I've recently updated the Ram on my Macbook Pro 2011 start of 4gig to 16gig. There was no difference in performance. someone knows what's the problem?

  In addition, I really want to increase the overall font on my machine and still keep the resolution as it is. If anyone can help with this. I can increase it on Windows but no BONE.

  I am running OS X Yosemite and have not upgraded to OS X El Capitan again and don't not thing it will make all the difference that this machine is not eligible

  Sincerely

  Wonga

  Ways to help make a slow Mac faster

  OS X El Capitan - if your Mac runs slowly

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• iPhone/iPad print several copies on LaserJet Pro M1217nfw after upgrading firmware

  Life was good - could print famously well from any iPad or iPhone at home... then I saw the firware update this active ePrint and I've updated so I was able to print to the print House of my laptop on the road. Do not know why, never really need before - but alas, I digress... The problem is that eth firmware update airprint sinc is no longer the functiosn correctly as I get continued to copies of the same print jobs - again and again - unless, after the first print job, I double click on the button "home" NFB iPad to make upi the print queue manager and press Cancel. It seems that the iPad/iPhone does not receive a complete message from the print job from the printer (?) and it continues to send print jobs.

  Anyone else having this problem or have any ideas on how to fix?

  Kind regards

  J.

  Good news for all,

  There's a new firmware update available now for m1217 series that solves this problem of airprint, that you all see. It is also available for windows, OSX no only. It is also a NEW version of the firmware, not the downgrade option available on osx only.

  Thank you all for your patience on this issue and the help of AlwaysNeon looking into this issue.

• BlackBerry Z10 Exchange ActiveSync fails after upgrading to 10.1

  After I upgraded my Z10 software at 10.1.0.273 I now lost connectivity to my work email. After troubleshooting, I realized that I could just remove and re-add my account again.

  The account deleted successfully, now I get the following message appears when you try to add:
  "Your device is not connected to a network, but the internet service is not available. Check your network settings.

  We use Port 8001 without SSL.

  There are no problems to connect with an IPhone.

  After installing the OS 10.1.0.2354 the problem disappeared.

  Solved!

• Software for Smartphones App World blackBerry fails after upgrade

  I updated my app world software.  Now when I open the program, it says that "an upgrade of the BB identity is necessary" and I would like to install it now.  When I click Yes, it is 'contact BB ID server 0'.  Then I get the error message 'identity BB installation failed, please try again later 8003' and the program stops.  This problem has existed for 3 days now.

  Hi all

  I solved my problem.  I'm with vodascum on the prepaid, but I don't think it makes a difference.  I tried to delete the app in the world and install again - according to the employee of vodascum, that works.  There can be no.  What worked was disabling the network vodascum uncheck "mobile network" in the management of connections and activation "wifi".

  My identity software installed in a Flash.

  Therefore, I attribute this problem to a failure in South Africa.

• C20 discovered appears only not on the 2nd monitor after upgrade firmware to 6.1.1

  Used to run 5.x and if not on a call that the left monitor would display the menus and the wallpaper while the 2nd monitor would show the Self discovers C20

  If in a VC call key participants would be on the left monitor and discovered or presentation would be on right monitor

  When upgraded to 6.1.1 changed the scenario above:

  • If not on a call the left monitor would display the wallpaper and the menus and the 2nd monitor only show black, discovered in PIP mode on monitor left (codec is set to dual display)
  • If in a VC call, key participants would be on the left monitor and presentation on the right monitor but the display of the self are in PIP on left monitor

  Check the codec settings and everything is configured

  Thank you

  This is a common question. This is limitation of TC6 which will be set on TC6.2. Please, follow this topic:

  https://supportforums.Cisco.com/message/3965573#3965573

  Paulo Souza

• Connecting directly to ESXi 5.1 for Windows XP fails after upgrading to update 02

  After that night at ESXi 5.1 Update 02 update

  (build No. 1483097

  file update - from - esxi5.1 - 5.1_update02.zip)

  I get the error:

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  I connect from a XP client, I googled this problem:

  vCenter Server 5.1 Update 2 Release Notes

  which is (I think), but the solution is for vCenter. How to solve without vCenter.

  Best regards, Lars.

  Welcome to the community,

  Although the article mentions only version 5.5, you can try and see if http://kb.vmware.com/kb/2049143 will help.

  André

• WNDR3400v2 & quot; AP mode & quot; missing switch after upgrading firmware for 1.0.0.52

  Switch to AP mode used to be under Advanced-Advanced Setup - Wireless Settings. He's gone. The articles I found by searching the site say it will automatically detect that it is behind another Netgear router and ask to configure AP mode, it is not automatically detect. Any help would be appreciated.

  Use LAN to LAN instead of LAN to WAN.

• PowerCLI Script to add disk fails after upgrade to vSphere 5.5 U1 and PowerCLI 5.5 R2

  Hi all

  I created the following script to add a disk to a virtual machine mode multi-writer for Oracle RAC. This script used to work on vSphere 5.5 GA and GA 5.5 PowerCLI, but now no longer works with vSphere 5.5 U1 and PowerCLI 5.5 R2. I don't know exactly, what has changed, but I think it has something to do with SCSI controller specification objects, more specifically the controller key.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  $busnumber = Read-host "SCSI Bus number".

  $unitnumber = Read-Host "drive number '.

  [int64] $capacity = Read-Host "disk capacity (GB).

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'capacitΘ in Ko' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host 'Controller key' $ctrll.extensiondata.controllerkey

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = $vmdk

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = $ctrll.extensiondata.controllerkey

  $spec.deviceChange [0].device.unitNumber = $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  For some reason any $ctrll.key no longer returns any value and is completely absent, if I do a $ctrll | Get-Member to view the properties of the object.

  Any advice on how to get this script working would be greatly appreciated.

  Kind regards

  Michael

  Hi Luke,.

  Took a bit of debugging, but I finally got the script to work. Looks like that the values for $ctrll.key that I expected to be in the object disappeared definitively. In order to find the correct value, I now have to check $ctrll.extensiondata.key. Also, I needed to cast variables very carefully to the device specification. For the controllerKey it must be cast to int, like the unitNumber. Also found that the calculation for capacitykb should be cast to int64 and the 1 GB and 1 KB should be lowercase for a reason, otherwise the value is returned as a zero. So some weird things in 5.5 U1 which may seem spoiled API. Here is the final script as i've got working. It is not enough, there is no validation, police checks or anything either, but it works.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  [int] $busnumber = Read-host "SCSI Bus number number"

  [int] $unitnumber = Read-Host "drive number '.

  $capacity = Read-Host "(GB) disc.

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'Disk in KB capacity' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host "controller key" $ctrll.extensiondata.key "

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = "" + $vmdk ".

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = [int] $ctrll.extensiondata.key

  $spec.deviceChange [0].device.unitNumber = [int] $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  Now I just need to check if the script that I have which attaches to this disc to the other nodes works Oracle RAC.

• BI Publisher Document processor fails after upgrading on AS / 400 V5R4 to V7R1

  We used BI Publisher for four years now, and when we have improved our operating system to V7R1, we get unusual errors when calling processor documents.  We run the same exact order on two different machines, and we get a FileNotFoundException exception on the new (V7R1 box).   Studied the newspapers in both machines, we get the following:

  = > RUNJVA CLASS (oracle.apps.xdo.batch.DocumentProcessor) PARM('-debug' '-tempdir' '/e1je/UAT/Outbound/XPTempDir' '/e1je/UAT/Outbound/WORKDIR/70207_308131654402711.xpctrl')

  Java.version property has been detected as input. This property is used as the output only and has no effect on the initialization of the JAVA virtual machine.

  [081613_124243749] Oracle XML Parser [] [STATEMENT] version: Oracle XML Developers Kit 10.1.3.0.0 - Production

  [081613_124243753] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT] the xdo.cfg was not found.

  [081613_124243768] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): startDocument entered < =.

  ==================

  [081613_124243781] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124243781] [oracle.apps.xdo.template.EFTProcessor] [STATEMENT] EFTProcessor constructor is called.

  [081613_124243785] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124244201] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo is deleted

  [081613_124244204] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] / e1je/UAT/Outbound/XPTempDir/081613_124243754 is deleted

  [081613_124244560] [] [STATEMENT] WARNING: old RTF version detected, disabled nested table

  [081613_124244608] [] [STATEMENT] - cell by rank: 2.

  [081613_124244805] [] [STATEMENT] Add: {TYPE of MODEL (:4)} HLDR

  [081613_124244805] [] [STATEMENT] Add: {FIXED_POSITION_BASED (STR)}

  [081613_124244807] [] [STATEMENT] - cell by rank: 2.

  [081613_124244807] [] [STATEMENT] Add: {(:4)} HLDR OUTPUT CHARACTER SET

  [081613_124244807] [] [STATEMENT] Add: {iso-8859-1 (STR)}

  Values here loading

  [081613_124245599] [] [STATEMENT] expression: rpad ((CONVERT_CASE (TO_CHAR (»),

  ("NONE")), 1,' ')

  [081613_124245600] [] [STATEMENT] - cell by rank: 2.

  [081613_124245601] [] [STATEMENT] Add: {END LEVEL (:3)} HLDR

  [081613_124245601] [] [STATEMENT] Add: {V558671A_S8 (STR)}

  [081613_124246022] [oracle.apps.xdo.common.xml.XSLT10gR1] [STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production

  [081613_124246027] [] [EXCEPTION] java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo (a file or a directory in the path name

  OES does not exist.)

  at java.io.FileInputStream. < init > (FileInputStream.java:126)

  at java.io.FileInputStream. < init > (FileInputStream.java:85)

  at oracle.apps.xdo.template.eft.EFTGenerator.loadXSL (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (unknown Source)

  [081613_124246029] [oracle.apps.xdo.batch.DocumentProcessorEngine] [EXCEPTION]

  java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/3.xdo (a file or a directory in the path name does not exist.)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:194)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:84)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument (NonValidati ngParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (Unknown Source) [081613_124246030] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): endDocument entered < =.

  ================

  [081613_124246030] [] [STATEMENT] output-> 0: null

  [081613_124246030] [] [UNEXPECTED] DocumentProcessor: batch xml-> 2,494 seconds processing time

  Complete Java program

  It seems it is the removal of the temporary directory until it is finished with it.  Any help on why this might be involved would be appreciated.

  Doug

  It was a problem in the file xdocore.jar of Oracle.  We receive the last patch of them and the problem was solved.