Media Encoder fails after upgrade

Similar Questions

• How can I use Media Encoder with After Effects?

  Hello

  I will just get to the point, how can I Sync Media Encoder with After Effects? because I really want to send my projects done for media encoder to make them via media encode instead of sequels because then Meanwhile I can work on another project! If anyone can help me with what would be really great !

  Kind regards

  Yusuf

  Hi Yusufk51841696,

  I will just get to the point, how can I Sync Media Encoder with After Effects? because I really want to send my projects done for media encoder to make them via media encode instead of sequels because then Meanwhile I can work on another project! If anyone can help me with what would be really great!

  Make sure that you have installed, same version of After effects and Media encode.

  Also check out this link:

  Basics of make or export to after effects CC

  Thank you

  Ilyes Singh

• Test project... DVD "Encode failed" after sending in yet?

  Starting from that? in forum Pr pretty still since this is where the project began.

  Background: started this project with the old computer system and first Elements 7. Answers Forum makes me think of upgrading to Pr Pro do multi cam with different types of sources... I've updated Pr CS4... built a new computer system to support... (as an aside) had time incredibly difficult troubleshooting what was a bad memory module. Project for later and later each month. Thus, on the problem at hand.

  New system: because that's all new all drivers are updated etc.

  Premiere Pro CS4 version 4.2 creative suite includes again etc.

  Windows 7 Premium Home 64 (upgrade from Vista Home Prem 64)

  Mobo: EVGA P55 SLI

  CPU: I7 860

  GPU: GTX 260 (two in SLI)

  HD 3: 1 = TB, x 2 = 750GB each 2.5 to total

  Currently only 2 GB of Ram (4 GB original, has no replacement of 2 GB on the way)

  LG Blu Ray burner

  DVD/CD (2nd optical drive)

  project: two sources of the camera. CANON GL2 (DV), Canon HF S100 (HDV).

  Context is material in concert, so two synchronized cameras, a master audio track.

  I play a little test project (the sequence is about 20 minutes) to learn all the necessary steps to complete the finals.

  Choose the parameters of the project: NTSC DV 48 big screen, in the final result will be DVD

  I have synced with success the two cameras source clips, again it is AVCHD (.) MTS) the other DV (.avi).

  created the nested sequence, active MultiCam, published in monitor MultiCam! Yes, well.

  Now I have this Multi Cam sequence send on DVD. So, after watching the tutorials first and I still have this on PR...

  File... Dynamic links home... Send again.

  In the still, I add a basic with appropriate etc. links menu tests very well... well... looks all together.  Go to Build w / DVD in the drive, starts fine, opens the window for coding, gets a ways (20-30 minutes), then the pop-up window error that says: 'Encoding failed', a window main sub says:

  'Building Progess transcoding... '. Failed.

  Tried to write the same test sequence to the Image of the DVD on hard drive, same result, +/-20 minutes and "encode failed.

  Read the other discussions of the forum to find clues. Someone suggested to another for Pr Pro sequence as a avi file export. And then integrate this still active and burn DVDs.

  I tried to export as avi using this same MultiCam editing sequence of Pr Pro.

  This opens the Adobe Media Encoder. from there, I get a different error...

  "ImporterProcessServer.exe has stopped working".

  This error appears after 06:59, also says 08:13:31 remaining.

  I ordered more RAM. In addition, I get 2 GB of spare module soon. My feeling is that the current memory in my system is not present, but not causing these problems.  However, I don't know if it's true.

  Of course, I'm a beginner, PrPro only to learn from the limited experience of PrElements and online tutorials and any help I can find. I was excited that I actually accomplished the steps I'm going to need for this project. But it's kind of become like the exodus from Egypt, and I don't want to spend 40 years I was wondering in the desert before reaching the promised land. Please help me to cross the Jordan!

  Kenny

  I was talking about video card drivers, drivers for the audio card, an add-on

  PCI or PCIx you have and the optical drive firmware cards.

  Let us know how the extra RAM.

  -Jeff

• I can transcode my AVCHD to DNxHD files in Media Encoder, but when I ingest through prelude, Media Encoder fails.

  I'm more educated long form of student projects to transcode the AVCHD material in Quicktime using the codec, DNxHD (which is installed and then loaded into Media Encoder preset).

  I am doing this since it is the workflow suggested in this article:

  Video and audio glitches. AVCHD video

  He worked many year the CS6 last, but this workflow doesn't work at all in CC2014.

  When I transcode directly through Media Encoder, the process works well, but if I ingest using Prelude (where students choose to transcode files, set destination, etc.) Transcoding fails and we get an error of SOUL. Don't know why it would be different right transcoding in Media Encoder...

  We work on computers running Windows 7.

  Any suggestions?

  Thank you!

  HI -.

  There should be no need to transcode the media. Premiere Pro and Prelude should be able to manage the native format very well.

  But with regard to the question of transcode: can you please let me know exactly which versions of the products you use? Also please specify exactly what SOUL preset you use.

  Thank you-

  Michael

• When I add my composition to Adobe Media Encoder from After Effects, it makes it wrong?

  How is it that when I add my composition directly effects to adobe media encoder, it makes out of adobe media encode correctly? I mean, here the video fate a bit scrambled pieces of it overlap other parts. Is this a problem with "dynamic link"? I did something wrong? I work in CC.

  I think you fail to understand what is said. When you add one composition to another, add a composition with a red background for a composition with a blue background, red background goes away and the blue background is preserved, not vice versa. Select the transparency grid and you will see the blue background disappears and you see the transparency. It has always been this way since you were able to select a color background in AE there nearly 20 years.

  When you render a lossless without alpha format and the color is defined prior multiplied (red in your example) background color is multiplied with the alpha pre giving you a red background in your render lossless. If you add your Main Comp to the TEA and you have no option for pre multiply the alpha channel, so it is ignored and you end up with a black background. If you change the output settings in the SOUL to something like JPEG 2000 and 32-bit or 32-bit PNG, you will get a straight alpha channel, the industry standard, and a black background. If you choose a codec which does not support alpha channels, you get just a black background.

  I guess what I'm trying to say is that everything works exactly as it was designed to work, and the only reason why you found the red background of your comps background color when you return a lossless with alpha multiplied pre, is that the background color is meadow multiplied with the bottom. In a normal production pipeline it is assumed you want to preserve the transparency throughout the production process. Multiplying the background color is useful in a scenario very little. More than 40 years the realization of films and creating special effects and composites (yes I did in a lab with the movie) I have never used an alpha pre multiplied with a background colored except in a situation of class in order to demonstrate that it is. Here's how you can see with a multiplied pre alpha is. :

  Rotate your model nested 30º in order to have some aliasing then try rendering your comp with the lossless with alpha preset and keep premultiplied lit for the alpha channel. Look carefully at the embattled edges and you will see a red mixed in on the edges. You can also use the lossless and then restore an alpha only, together the alpha only made as matte to make without loss and you will see the Red edges once again. Use straight alpha and the edges disappear. Here is this that rendered Lossless with alpha and multiplied pre gives you.

  

  So, assuming you still want to maintain complete transparency in the production pipeline that everything works as it should with one exception, the settings default lossless with alpha should probably be for default rendering right alpha then people who are not familiar with the use of alpha channels and a standard production pipeline would not be caught. As I said in the first place, this isn't a bug, it is normal for a production pipeline. Do not understand how AE or any other composition app handles alpha channels, that's what attracted to you. If you want a background color, add a solid. The only reason forever the background color of a black everything except model value is for those rare occasions where you might want to throw some color in the alpha edges.

• Remote access VPN fails after upgrading to 8.04

  Hello:

  Sorry if this has been posted, but I couldn't find it anywhere.

  After the upgrade of my 2 of my 5510 s to 8.04, my remote access VPN does not work. I can connect via Radius without problem. Once connected, I can't do anything on the network. When I try to telnet to any device, I get a white screen with no response. As it is to find the device but it does not. E-mail, intranet, nothing works. Seems to be time. I tried to upgrade to the latest version of Windows Client, still no go.

  Everyone knows this at all? Any help appreciated.

  TIA,

  Brad

  I saw the same problem after upgrading to 8.0.4. And it is caused by the "IP Compression" option enabled in group policy. After deactivation, it works. Cisco has just completed this bug recently:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu26649

  Zhenning

• Media Encoder fails to launch timeline

  I have CS4. For some reason, I can't export timeline; File > export > Media.  Some time ago I used Media Encoder to encode video files in stand-alone mode. Could he have messed up! I'm looking for help here please.

  Glad you got it working.

• Heel of workflow that wfstubbuildingmachine fails after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to build machines that call the workflow WFStubBuildingMachine heel. It worked correctly before the upgrade. If we remove this workflow, machines to build then OK, but since we have many elements which occur in vCO (annotations vCenter, created group, new machine name assigned, etc.) which are called by this stubworkflow, construction of machines without it are useless to use.

  
  

  Here are the 3 heel workflows that we have configured through custom properties. Note: We have not any assigned value, but never did before the upgrade either. I guess that a value is not required as long as you agree with vCAC pick up the latest rev of the workflow when it is running?
  

  

  
  

  After asking to build a machine that includes the WFStubBuildingMachine call, there eventually times out and the following error appears in the newspapers:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. We have removed this stubworkflow of plans by removing the custom property and machines very well build.
  3. We left the other stubworkflows in the plans and build machines very well as long as WFStubBuildingMachine is not present.
  4. We also have a problem with the designer after the 6.1 update. I have separately regarding who, as we do not know if it is related or not. It seems that it is maybe not related as the other stubworkflows works fine, but not this one. vCAC Designer (cloudutil.exe) will not start after the upgrade to 6.1
  5. We cannot use designer to crack open the WFStubBuildingMachine workflow, given that the designer is broken (see #4 above).
  6. Everything after upgrading to 6.1 seems to work very well. All of the tabs in the user interface are features. All services that you expect to be running are running on the devices and the server of IaaS. Decommissioning of machine for the "machines" or machines built without WFStubBuildingMachine work correctly, etc.
  7. vCAC 6.1 vCO plugin has been installed/updated. This problem existed before we did the update of the plugin vCO and persists thereafter.
  8. vCAC Workflow Hotfix Package has been applied. This problem existed before we did the update of the plugin vCO and persists thereafter. http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2088838
  9. When the upgrade to 6.1, we chose the option "preserve my latest versions of workflow. The CLI via cloudutil.exe, we can see that it has added a new rev for the workflow of WfStubBuildingmachine 6.1 (8 Rev.), then copied to rev again as the last (rev 9). Our previous rev was 8 before the upgrade. Thus, it seems that it worked as expected.

  We are very down because of this. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  One thing we're curious to know, is if the workflow of personalization as shown in this post below vCO Mathilde be run after the upgrade from 6.01 to 6.1? We didn't as long as it has not listed in guides upgrade, documentation or blog posts, but just curious if someone else did so. We did not want to do this as it will scan what changes have been made to the stubworkflows before he does. http://www.vmtocloud.com/how-to-extend-Vcac-with-VCO-part-1-installation/

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to solve with the help of the support team to the development/vCAC:

  1. Open the designer Client.
  2. Load the workflow with the question, WFStubBuildingMachine in our case. Make sure that the latest rev is loaded.
  3. Find the block in the workflow where the issue is encountered. There should be a red exclamation point.
  4. Take a screenshot of the code block and note all code/functions/variables because you will need to recreate it in a later step.
  5. Right-click on the code block and delete it.
  6. Recreate the block in the workflow and to re - establish links with the rest of the workflow.
  7. Download the workflow of heel.
  8. Leave the customer from the designer.

  It seems than the 6.1 update do not recompile / adjust workflows to heel if they refer to the DLL that are upgraded as part of the upgrade process 6.1. Our workflow to heel was making reference to a dll that has been replaced by a newer version of the 6.1 update. Following the procedure above, recompiled the workflow with the new dll.

  It would be nice if the upgrade process vCAC traveled the workflows of heel and made for you or did you call at least. I hope it's something that will be considered for a future version.

• Made in Media Encoder from After Effects is 8 x slower than to Premiere Pro

  Rendering H.264 of AEX by SOUL is round about 8 x slower that make the same file (wihtout any effects applied) of the BODY through Media Encoder with the same characteristics. I can monitor that there is a significant difference in the use of the processor between the two methods. Any tips?

  My machine has 2 x X 5680, 48 GB of RAM, nvidia GTX780, WIN7 PRO

  now, we respond as a 'normal' known, aex cause treats different files first... doesn't make too much sense to me, but it's my beloved adobe in charge... help yourself ;-)

• Satellite C650, media recovery fails after replacing HARD drive

  I have a 3 years C650, and the HARD drive has failed. I got a replacement drive and sorts to recover from the recovery media disks that I created and although he claimed to have re - partition the drive and reinstalled windows, windows startup fails when tried to configure the devices "could not configure windows to run on this hardware.

  After this error, the boot sequence goes into an endless loop, asking to start the installation procedure.

  Thinking that my records may have been corrupted, I ordered a set of Toshiba recovery disks. Once again, these go through the recovery process and still once, Windows startup does not exactly in the same place.

  A little annoying to have spent £30 for nothing.

  I have a picture of Windows system on my external HARD drive, but I can't get the machine to a point where it will actually start so I can recover from that.

  Any suggestions on how to proceed is welcome!

  Thank you
  Martin

  Hello

  Of course, this isn't a problem of recovery disk.
  I guess there is a problem with the HARD drive but I n t think that the HARD drive has failed I think there is a problem of setting

  First, you should go to BIOS and check if the SATA set to AHCI.
  Then you should also format the HARD drive again.

  I recommend to use the freeware tool called GParted. You could create a live USB stick bootable flash memory which will allow you to start the unit and start GParted tool.
  Format the HARD drive, and then create a partition.

  After that, take the recovery disk and start the recovery procedure.
  Good luck

• Computer fails after upgrading firmware HD

  Hello

  I installed the update of the firmware recommended D2D5DEM1.zip on my Dell XPS laptop. I used the GUI of Windows. As expected, the system rebooted, but have not upgraded successfully firmware.

  After a whole night of waiting, I turned the computer off and tried to restart, but the system is saying "Not found operating system".

  I tried again to update the firmware of the HD through the USB interface, and this time it worked successfully, however I am always struck the error "operating system not found '.

  I tried to:

  (a) try to run software PartitionLogic--> can not detect my partitions

  (b) reinstall Windows 7--> it cannot locate my drive for installation

  (c) install Windows XP--> she complains that something is wrong with my HD and stop intallation

  (d) that run the Dell Diagnostics (latest version)--> no problem was detected. He has passed all the tests of HD

  What are my options next?

  I finally did the job.

  I ran the built-in diagnosis proposed by Nikhil, but he did not show any problem.

  Then I installed Linux Mint 14, which has created a new partition and installed successfully.

  And finally, I was able to install Windows 7 new; He was able to recognize my HD and then create a new NTFS partition.

  I lost the data of HD, I had to delete the partitions, but I had good backups.

  Thank you for help.

• BlackBerry Z10 Exchange ActiveSync fails after upgrading to 10.1

  After I upgraded my Z10 software at 10.1.0.273 I now lost connectivity to my work email. After troubleshooting, I realized that I could just remove and re-add my account again.

  The account deleted successfully, now I get the following message appears when you try to add:
  "Your device is not connected to a network, but the internet service is not available. Check your network settings.

  We use Port 8001 without SSL.

  There are no problems to connect with an IPhone.

  After installing the OS 10.1.0.2354 the problem disappeared.

  Solved!

• Software for Smartphones App World blackBerry fails after upgrade

  I updated my app world software.  Now when I open the program, it says that "an upgrade of the BB identity is necessary" and I would like to install it now.  When I click Yes, it is 'contact BB ID server 0'.  Then I get the error message 'identity BB installation failed, please try again later 8003' and the program stops.  This problem has existed for 3 days now.

  Hi all

  I solved my problem.  I'm with vodascum on the prepaid, but I don't think it makes a difference.  I tried to delete the app in the world and install again - according to the employee of vodascum, that works.  There can be no.  What worked was disabling the network vodascum uncheck "mobile network" in the management of connections and activation "wifi".

  My identity software installed in a Flash.

  Therefore, I attribute this problem to a failure in South Africa.

• Connecting directly to ESXi 5.1 for Windows XP fails after upgrading to update 02

  After that night at ESXi 5.1 Update 02 update

  (build No. 1483097

  file update - from - esxi5.1 - 5.1_update02.zip)

  I get the error:

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  I connect from a XP client, I googled this problem:

  vCenter Server 5.1 Update 2 Release Notes

  which is (I think), but the solution is for vCenter. How to solve without vCenter.

  Best regards, Lars.

  Welcome to the community,

  Although the article mentions only version 5.5, you can try and see if http://kb.vmware.com/kb/2049143 will help.

  André

• PowerCLI Script to add disk fails after upgrade to vSphere 5.5 U1 and PowerCLI 5.5 R2

  Hi all

  I created the following script to add a disk to a virtual machine mode multi-writer for Oracle RAC. This script used to work on vSphere 5.5 GA and GA 5.5 PowerCLI, but now no longer works with vSphere 5.5 U1 and PowerCLI 5.5 R2. I don't know exactly, what has changed, but I think it has something to do with SCSI controller specification objects, more specifically the controller key.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  $busnumber = Read-host "SCSI Bus number".

  $unitnumber = Read-Host "drive number '.

  [int64] $capacity = Read-Host "disk capacity (GB).

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'capacitΘ in Ko' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host 'Controller key' $ctrll.extensiondata.controllerkey

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = $vmdk

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = $ctrll.extensiondata.controllerkey

  $spec.deviceChange [0].device.unitNumber = $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  For some reason any $ctrll.key no longer returns any value and is completely absent, if I do a $ctrll | Get-Member to view the properties of the object.

  Any advice on how to get this script working would be greatly appreciated.

  Kind regards

  Michael

  Hi Luke,.

  Took a bit of debugging, but I finally got the script to work. Looks like that the values for $ctrll.key that I expected to be in the object disappeared definitively. In order to find the correct value, I now have to check $ctrll.extensiondata.key. Also, I needed to cast variables very carefully to the device specification. For the controllerKey it must be cast to int, like the unitNumber. Also found that the calculation for capacitykb should be cast to int64 and the 1 GB and 1 KB should be lowercase for a reason, otherwise the value is returned as a zero. So some weird things in 5.5 U1 which may seem spoiled API. Here is the final script as i've got working. It is not enough, there is no validation, police checks or anything either, but it works.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  [int] $busnumber = Read-host "SCSI Bus number number"

  [int] $unitnumber = Read-Host "drive number '.

  $capacity = Read-Host "(GB) disc.

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'Disk in KB capacity' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host "controller key" $ctrll.extensiondata.key "

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = "" + $vmdk ".

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = [int] $ctrll.extensiondata.key

  $spec.deviceChange [0].device.unitNumber = [int] $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  Now I just need to check if the script that I have which attaches to this disc to the other nodes works Oracle RAC.