Heel of workflow that wfstubbuildingmachine fails after upgrading to 6.1

Similar Questions

• Remote access VPN fails after upgrading to 8.04

  Hello:

  Sorry if this has been posted, but I couldn't find it anywhere.

  After the upgrade of my 2 of my 5510 s to 8.04, my remote access VPN does not work. I can connect via Radius without problem. Once connected, I can't do anything on the network. When I try to telnet to any device, I get a white screen with no response. As it is to find the device but it does not. E-mail, intranet, nothing works. Seems to be time. I tried to upgrade to the latest version of Windows Client, still no go.

  Everyone knows this at all? Any help appreciated.

  TIA,

  Brad

  I saw the same problem after upgrading to 8.0.4. And it is caused by the "IP Compression" option enabled in group policy. After deactivation, it works. Cisco has just completed this bug recently:

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsu26649

  Zhenning

• Computer fails after upgrading firmware HD

  Hello

  I installed the update of the firmware recommended D2D5DEM1.zip on my Dell XPS laptop. I used the GUI of Windows. As expected, the system rebooted, but have not upgraded successfully firmware.

  After a whole night of waiting, I turned the computer off and tried to restart, but the system is saying "Not found operating system".

  I tried again to update the firmware of the HD through the USB interface, and this time it worked successfully, however I am always struck the error "operating system not found '.

  I tried to:

  (a) try to run software PartitionLogic--> can not detect my partitions

  (b) reinstall Windows 7--> it cannot locate my drive for installation

  (c) install Windows XP--> she complains that something is wrong with my HD and stop intallation

  (d) that run the Dell Diagnostics (latest version)--> no problem was detected. He has passed all the tests of HD

  What are my options next?

  I finally did the job.

  I ran the built-in diagnosis proposed by Nikhil, but he did not show any problem.

  Then I installed Linux Mint 14, which has created a new partition and installed successfully.

  And finally, I was able to install Windows 7 new; He was able to recognize my HD and then create a new NTFS partition.

  I lost the data of HD, I had to delete the partitions, but I had good backups.

  Thank you for help.

• BlackBerry Z10 Exchange ActiveSync fails after upgrading to 10.1

  After I upgraded my Z10 software at 10.1.0.273 I now lost connectivity to my work email. After troubleshooting, I realized that I could just remove and re-add my account again.

  The account deleted successfully, now I get the following message appears when you try to add:
  "Your device is not connected to a network, but the internet service is not available. Check your network settings.

  We use Port 8001 without SSL.

  There are no problems to connect with an IPhone.

  After installing the OS 10.1.0.2354 the problem disappeared.

  Solved!

• Software for Smartphones App World blackBerry fails after upgrade

  I updated my app world software.  Now when I open the program, it says that "an upgrade of the BB identity is necessary" and I would like to install it now.  When I click Yes, it is 'contact BB ID server 0'.  Then I get the error message 'identity BB installation failed, please try again later 8003' and the program stops.  This problem has existed for 3 days now.

  Hi all

  I solved my problem.  I'm with vodascum on the prepaid, but I don't think it makes a difference.  I tried to delete the app in the world and install again - according to the employee of vodascum, that works.  There can be no.  What worked was disabling the network vodascum uncheck "mobile network" in the management of connections and activation "wifi".

  My identity software installed in a Flash.

  Therefore, I attribute this problem to a failure in South Africa.

• Media Encoder fails after upgrade

  After the most recent media encoder upgrade, about a week and a half - everything I have queued to the encoder will fail.

  The same code parameters work fine directly from Premier Pro.

  I would use the ease of queues and do not have small parts of code one by one.

  Update/Fix it please?

  Could you try to clear the preferences of Media Encoder now shift and launching Media Encoder?

  If this does not help, you can delete all hide media.  "To do this, quit all Adobe applications and remove"hide media"and media Cache files" folders under the following path.

  Mac: ~/Library/Application Support/Adobe/Common

  Win: : \Users\\AppData\Roaming\Adobe\Common

• Connecting directly to ESXi 5.1 for Windows XP fails after upgrading to update 02

  After that night at ESXi 5.1 Update 02 update

  (build No. 1483097

  file update - from - esxi5.1 - 5.1_update02.zip)

  I get the error:

  A unknown connection error has occurred. (The client may not send a request to the server. (La connexion sous-jacente a été fermée: une erreur inattendue s'est produite sur un envoi.))

  I connect from a XP client, I googled this problem:

  vCenter Server 5.1 Update 2 Release Notes

  which is (I think), but the solution is for vCenter. How to solve without vCenter.

  Best regards, Lars.

  Welcome to the community,

  Although the article mentions only version 5.5, you can try and see if http://kb.vmware.com/kb/2049143 will help.

  André

• PowerCLI Script to add disk fails after upgrade to vSphere 5.5 U1 and PowerCLI 5.5 R2

  Hi all

  I created the following script to add a disk to a virtual machine mode multi-writer for Oracle RAC. This script used to work on vSphere 5.5 GA and GA 5.5 PowerCLI, but now no longer works with vSphere 5.5 U1 and PowerCLI 5.5 R2. I don't know exactly, what has changed, but I think it has something to do with SCSI controller specification objects, more specifically the controller key.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  $busnumber = Read-host "SCSI Bus number".

  $unitnumber = Read-Host "drive number '.

  [int64] $capacity = Read-Host "disk capacity (GB).

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'capacitΘ in Ko' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host 'Controller key' $ctrll.extensiondata.controllerkey

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = $vmdk

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = $ctrll.extensiondata.controllerkey

  $spec.deviceChange [0].device.unitNumber = $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  For some reason any $ctrll.key no longer returns any value and is completely absent, if I do a $ctrll | Get-Member to view the properties of the object.

  Any advice on how to get this script working would be greatly appreciated.

  Kind regards

  Michael

  Hi Luke,.

  Took a bit of debugging, but I finally got the script to work. Looks like that the values for $ctrll.key that I expected to be in the object disappeared definitively. In order to find the correct value, I now have to check $ctrll.extensiondata.key. Also, I needed to cast variables very carefully to the device specification. For the controllerKey it must be cast to int, like the unitNumber. Also found that the calculation for capacitykb should be cast to int64 and the 1 GB and 1 KB should be lowercase for a reason, otherwise the value is returned as a zero. So some weird things in 5.5 U1 which may seem spoiled API. Here is the final script as i've got working. It is not enough, there is no validation, police checks or anything either, but it works.

  SE connect-VIServer VC

  $vmname = Read-Host "VM name to add disks to.

  $vmdk = Read-Host 'drive to add (full path) '.

  [int] $busnumber = Read-host "SCSI Bus number number"

  [int] $unitnumber = Read-Host "drive number '.

  $capacity = Read-Host "(GB) disc.

  $vm = get - VM $vmname

  [int64] $capcitykb = ($capacity * 1 GB) / 1 KB

  Write-Host "create new album"$vmdk"of size"$capacity"GB"$vm"SCSI ID"$busnumber":" $unitnumber

  Write-Host 'Disk in KB capacity' $capcitykb

  $ctrll = get-controller SCSI - VM $vm |? {$_.extensiondata.busNumber - eq $busnumber}

  Write-Host "controller key" $ctrll.extensiondata.key "

  $spec = new-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.deviceChange = new-Object VMware.Vim.VirtualDeviceConfigSpec [] (1)

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDeviceConfigSpec

  $spec.deviceChange [0] .operation = 'Add '.

  $spec.deviceChange [0] .fileOperation = "crΘer".

  $spec.deviceChange [0] = new-Object VMware.Vim.VirtualDisk .device

  $spec.deviceChange [0].device.key = - 100

  $spec.deviceChange [0].device.backing = new-Object VMware.Vim.VirtualDiskFlatVer2BackingInfo

  $spec.deviceChange [0].device.backing.fileName = "" + $vmdk ".

  $spec.deviceChange [0].device.backing.thinProvisioned = $false

  $spec.deviceChange [0].device.backing.split = $false

  $spec.deviceChange [0].device.backing.writeThrough = $false

  $spec.deviceChange [0].device.backing.eagerlyScrub = $true

  $spec.deviceChange [0].device.backing.diskMode = "independent_persistent".

  $spec.deviceChange [0].device.connectable = new-Object VMware.Vim.VirtualDeviceConnectInfo

  $spec.deviceChange [0].device.connectable.startConnected = $true

  $spec.deviceChange [0].device.connectable.allowGuestControl = $false

  $spec.deviceChange [0].device.connectable.connected = $true

  $spec.deviceChange [0].device.controllerKey = [int] $ctrll.extensiondata.key

  $spec.deviceChange [0].device.unitNumber = [int] $unitNumber

  $spec.deviceChange [0].device.capacityInKB = $capacitykb

  $spec.extraConfig = new-Object VMware.Vim.OptionValue [] (1)

  $spec.extraConfig [0] = new-Object VMware.Vim.OptionValue

  $spec.extraConfig [0] .key = 'scsi' + $busnumber + ': ' + $unitnumber + '.sharing.

  $spec.extraConfig [0] .value = 'multi-writer'

  $vm. ExtensionData.ReconfigVM ($spec)

  Now I just need to check if the script that I have which attaches to this disc to the other nodes works Oracle RAC.

• ASP results page fails after upgrading to DW 8.02

  It comes to DW 8.02, SQL server, ASP (not dot.net).
  
  I have a search function which selects one of the 5 queries with the text entered by the user and the column names. The old page of results works fine until I have replace the code in the recordset with the new parameter based in 8.02 recordsets.
  
  My search form uses GET and calls the results to variables selColumn and txSearch page.
  
  Both old and new results pages have this code to dimension the form variables:
  
  < %
  Dim rslocate__reqColumn
  rslocate__reqColumn = 'SOCIETY '.
  If (Request.QueryString ("selColumn") <>"") then
  rslocate__reqColumn = Request.QueryString ("selColumn")
  End If
  % >
  < %
  Dim rslocate__reqSearch
  rslocate__reqSearch = 'test '.
  If (Request.QueryString ("txSearch") <>"") then
  rslocate__reqSearch = Request.QueryString ("txSearch")
  End If
  % >
  
  I also tried Request.Form without success. The data in SQL server type is of type nvarchar for all data.
  
  On the page resultats.asp is the old record set that still works:
  
  < %
  Dim rslocate
  Dim rslocate_numRows
  
  Set rslocate = Server.CreateObject ("ADODB. Recordset')
  rslocate. ActiveConnection = MM_members_STRING
  rslocate. Source = "SELECT * FROM ncmortgage.members WHERE"+ replace (rslocate__reqColumn,"'","" ") +" LIKE '% ' + replace (rslocate__reqSearch,"'","" "") + "%' ORDER BY UserID CSA»
  rslocate. CursorType = 0
  rslocate. CursorLocation = 2
  rslocate. LockType = 1
  rslocate. Open()
  
  rslocate_numRows = 0
  % >
  
  
  On the new resultats.asp 8.02 page shows no errors, but returns no data on the code is:
  
  < %
  Dim rslocate
  Dim rslocate_cmd
  Dim rslocate_numRows
  
  Set rslocate_cmd = Server.CreateObject ("ADODB.Command")
  rslocate_cmd. ActiveConnection = MM_members_STRING
  rslocate_cmd.CommandText = "SELECT * FROM ncmortgage.members WHERE? AS? ORDER BY ID ASC user"
  rslocate_cmd. Prepared = true
  rslocate_cmd. Parameters.Append rslocate_cmd. CreateParameter ("param1", 200, 1, 10, rslocate__reqColumn) ' adVarChar
  rslocate_cmd. Parameters.Append rslocate_cmd. CreateParameter ("param2", 200, 1, 35, '%' + rslocate__reqSearch + '%') ' adVarChar
  
  Set rslocate = rslocate_cmd. Run
  rslocate_numRows = 0
  % >
  
  I tried everything in the last two days to make it work. All the other functions that I converted work properly in 8.02, but it escapes me. Any help is sincerely appreciated.
  
  TKS,
  The H.

  > It comes to DW 8.02, SQL server, ASP (not dot.net).
  >
  > I have a search function which selects one of the 5 column names and queries
  > with
  > text of the entry by the user. The old results page works fine until I have replace the
  > code of recordset with the new parameter based recordsets in 8.02.

  Of
  http://www.Adobe.com/support/documentation/en/Dreamweaver/DW8/releasenotes.html:
  SQL injections in web applications
  The update updates server code generated by Dreamweaver to protect
  databases against the SQL Injection.

  Here is the workaround:
  http://KB.Adobe.com/selfservice/viewContent.do?externalId=kb402875&sliceId=2

• BI Publisher Document processor fails after upgrading on AS / 400 V5R4 to V7R1

  We used BI Publisher for four years now, and when we have improved our operating system to V7R1, we get unusual errors when calling processor documents.  We run the same exact order on two different machines, and we get a FileNotFoundException exception on the new (V7R1 box).   Studied the newspapers in both machines, we get the following:

  = > RUNJVA CLASS (oracle.apps.xdo.batch.DocumentProcessor) PARM('-debug' '-tempdir' '/e1je/UAT/Outbound/XPTempDir' '/e1je/UAT/Outbound/WORKDIR/70207_308131654402711.xpctrl')

  Java.version property has been detected as input. This property is used as the output only and has no effect on the initialization of the JAVA virtual machine.

  [081613_124243749] Oracle XML Parser [] [STATEMENT] version: Oracle XML Developers Kit 10.1.3.0.0 - Production

  [081613_124243753] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT] the xdo.cfg was not found.

  [081613_124243768] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): startDocument entered < =.

  ==================

  [081613_124243781] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124243781] [oracle.apps.xdo.template.EFTProcessor] [STATEMENT] EFTProcessor constructor is called.

  [081613_124243785] [] [STATEMENT] Logger.init (): * DEBUG MODE IS DISABLED. ***

  [081613_124244201] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo is deleted

  [081613_124244204] [oracle.apps.xdo.batch.FileSearch] [STATEMENT] / e1je/UAT/Outbound/XPTempDir/081613_124243754 is deleted

  [081613_124244560] [] [STATEMENT] WARNING: old RTF version detected, disabled nested table

  [081613_124244608] [] [STATEMENT] - cell by rank: 2.

  [081613_124244805] [] [STATEMENT] Add: {TYPE of MODEL (:4)} HLDR

  [081613_124244805] [] [STATEMENT] Add: {FIXED_POSITION_BASED (STR)}

  [081613_124244807] [] [STATEMENT] - cell by rank: 2.

  [081613_124244807] [] [STATEMENT] Add: {(:4)} HLDR OUTPUT CHARACTER SET

  [081613_124244807] [] [STATEMENT] Add: {iso-8859-1 (STR)}

  Values here loading

  [081613_124245599] [] [STATEMENT] expression: rpad ((CONVERT_CASE (TO_CHAR (»),

  ("NONE")), 1,' ')

  [081613_124245600] [] [STATEMENT] - cell by rank: 2.

  [081613_124245601] [] [STATEMENT] Add: {END LEVEL (:3)} HLDR

  [081613_124245601] [] [STATEMENT] Add: {V558671A_S8 (STR)}

  [081613_124246022] [oracle.apps.xdo.common.xml.XSLT10gR1] [STATEMENT] Oracle XML Developers Kit 10.1.0.5.0 - Production

  [081613_124246027] [] [EXCEPTION] java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/4.xdo (a file or a directory in the path name

  OES does not exist.)

  at java.io.FileInputStream. < init > (FileInputStream.java:126)

  at java.io.FileInputStream. < init > (FileInputStream.java:85)

  at oracle.apps.xdo.template.eft.EFTGenerator.loadXSL (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (unknown Source)

  [081613_124246029] [oracle.apps.xdo.batch.DocumentProcessorEngine] [EXCEPTION]

  java.io.FileNotFoundException: /e1je/UAT/Outbound/XPTempDir/081613_124243754/3.xdo (a file or a directory in the path name does not exist.)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:194)

  in java.io.FileOutputStream. < init > (FileOutputStream.java:84)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.xsl2text (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.endElement (unknown Source)

  at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:210)

  at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1310)

  at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:328)

  at oracle.xml.parser.v2.NonValidatingParser.parseDocument (NonValidati ngParser.java:295)

  at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:258)

  at oracle.apps.xdo.batch.DocumentProcessorEngine.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.process (unknown Source)

  at oracle.apps.xdo.batch.DocumentProcessor.main (Unknown Source) [081613_124246030] [oracle.apps.xdo.batch.DocumentProcessorEngine] [STATEMENT]

  = > startElement(): endDocument entered < =.

  ================

  [081613_124246030] [] [STATEMENT] output-> 0: null

  [081613_124246030] [] [UNEXPECTED] DocumentProcessor: batch xml-> 2,494 seconds processing time

  Complete Java program

  It seems it is the removal of the temporary directory until it is finished with it.  Any help on why this might be involved would be appreciated.

  Doug

  It was a problem in the file xdocore.jar of Oracle.  We receive the last patch of them and the problem was solved.

• vCAC Designer (cloudutil.exe) will not launch after upgrading to 6.1

  After having recently upgraded 6.0.1 to 6.1, we are unable to launch the vCAC GUI Designer (cloudutil.exe). The error stated at the launch of the designer customer is as follows:

  

  We tried the following already without success:

  1. We have a ticket open with support. A sev 1 for two weeks now. The ticket is with genius. Substantial quantities of newspapers were provided to support.
  2. The designer has been improved in 6.1 installation. We followed the procedure to uninstall the old client of Designer, download a new of the IaaS VAMI and install it.
  3. We get the same error, no matter which client or server is installed on the client of the designer. We tried the IaaS server itself (Windows Server 2008 R2 SP1) and several client machines (WIndows 7 SP1).
  4. We use self-signed certificates. Not that it should matter as it was working before the update 6.1 with self-signed certificates, but we validate the cert is in the store of confidence on all computers where the client attempts to run from.
  5. We tried to remove the client, ensuring that the customer directory no longer exists and reinstall the client.
  6. Also tried running Setup of customer "as an administrator".
  7. Validated the client installation program (DesignCenter - Setup.exe) is not "blocked" by right-clicking on it-> properties-> unlock.
  8. Tried to launch the Designer customer (cloudutil.exe) in different compatibility modes.
  9. We are able to run the query in the CLI commands by using cloudutil.exe. This confirms that he is able to talk to the back end. We can even list of all our stubworkflows and see the various revisions of them, but you can't change/see the stubworkflows using the CLI (this must be attached to a separate... note).

  We noticed the DynamicOps.Repository Assembly in the error references Version 6.0.0.0 after the upgrade. Some assemblies is not upgraded / replaced as part of the upgrade, it appears, so it's possible, it's normal, but it stood out.

  Unrelated to this, we are having a problem with the workflow specific heel after the upgrade as well and you have another position open about it here that Workflow Stub WFStubBuildingMachine fails after upgrading to 6.1

  Because we cannot enter the designer customer, we are not able to solve the problems, which means that we are down hard. We would prefer not to roll back even if we have good backups, as if no one else knows this problem then VMware will probably not initially get of it, and we will not be able to upgrade to 6.1 down the road with confidence.

  Has anyone seen this or something similar? Even if you do not, you have any suggestions to try?

  In case someone else runs into this problem, here is what has been done to work around this problem:

  • Open the cloudutil.exe.config file located in the Design Center directory is installed in.
  • Add the following block of the code highlighted in red between the two lines in black.
  • Save the file and close.
  • Restart the Client to the designer.

  This will tell the designer Client to use only 6.1 assemblies at the launch. The customer refers to 6.0 assemblies during the launch after the upgrade which are not present on the file system longer, so it's the only way known to work around him. The development isn't sure why old assemblies are always referenced, but they are reproduced it in their laboratory.

• Invoke the workflow via PowerShell vCO fails after 5.5.2 set at level

  Hello

  After upgrading to 5.5.2 vCO I have problems to run PowerShell workflows using REST. I read there are a lot of changes on the REST API vCO on this new version, so I think the upgrade has something to do with the problem.

  $username = ' XXXXXX

  $upassword = "XXXXXX".

  #create headers for appeal REST vCO

  $auth = $username + ':' + $upassword

  $Encoded = [System.Text.Encoding]: UTF8. GetBytes ($auth)

  $EncodedPassword = [System.Convert]: ToBase64String ($Encoded)

  $headers = @{' authorization '=' basic $($EncodedPassword) ' ;}}

  $value = 'nothing. '

  ' $body = ' <-xmlns = execution context " http://www.VMware.com/VCO "> "

  < Parameters >

  < name of the parameter = "arg_in_0" type = "string" >

  < string > "+ $value + < / string >".

  < / parameter >

  < / Parameter >

  < / execution context > '

  $ret = WebRequest call - uri https://vcoserver:8281/api/stream/0049f373-8dc4-4c1b-ae67-15e7bc106fa4/executions / -Headers $headers - body $body - ContentType "application/xml" - Post method

  I get the following error:

  Invoke WebRequest: HTTP 401 - Authentication complete state is required to access this resource

  type of status report

  message full authentication is required to access this resource

  Description this request requires HTTP authentication.

  VMware vFabric tc LIFE 2.9.5.SR1/7.0.50.C.RELEASE

  Thank you

  Juan.

  try changing the url of

  https://vcoserver:8281/api/stream/0049f373-8dc4-4c1b-ae67-15e7bc106fa4/executions /.

  TO

  https://vcoserver:8281/vco/api/stream/0049f373-8dc4-4c1b-ae67-15e7bc106fa4 / executions /.

  vCO has moved in a context of /vco/

  Avoid any new REST API.

  I also notice that in provides script it is missing from the quote for a username

  > $username = ' XXXXXX

• vCenter Storage Monitoring Service Service initialization failed after the upgrade from 5.1 to 5.5

  I recently upgraded from vCenter 5.1 to 5.5. After the upgrade, I started getting health warnings for the VMware vCenter monitoring of Storage Service that say "failed to initialize the Service." I restarted the vCenter server and restart services several times and who has not deleted the question. When I look in the SMS. LOG file there is no activity in it since I did the upgrade (a week or more there). All prior activity in the SMS. JOURNAL seems to be well upward until the upgrade took place though. I found at least half a dozen KB articles that describe the various reasons why this error may occur, but they all relate to older versions of vCenter. Just to be complete, although I saw the symptoms in the articles and none of them really seem to be the same as what I see. My hypothesis is that perhaps the SMS did not get properly re-installed upgrading because I don't see any SMS subdirectory in the directory \Program Files\VMware\Infrastructure\tomcat\webapps but I do not know if this directory must exist on a 5.5 installation.

  If you would be grateful if anyone has any advice for troubleshooting for this type of error.

  Thank you

  Mike

  Change the credentials of the service account for VMware vSphere Profile-Driven Storage Service to those used to start the VMware vCenter Server service and the service of VMware VirtualCenter Management Webservices. By default, the account used Local System.

  Restart the service, the change was made, and then check.

• my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570

  my computer has never been able to upgrade to vista service pack 2, it is said that he failed and error code 80070570. I have also a box gray volume that keeps popping up on my screen. It is grey with a yellow speaker and a red volume bar that says 0. I tried everything on the forums as a clean boot and the registry editor. Any ideas?

  I recommend you:

  Go to a command prompt:

  Start, all programs, accessories, command prompt.

  Right click on command prompt and select "Run as Administrator" http://windows.microsoft.com/en-US/windows7/How-do-I-run-an-application-once-with-a-full-administrator-access-token > and run sfc/scannow http://support.microsoft.com/kb/929833>

  Type exit (to close the elevated command prompt window)

  Reset

  See if that solves the problem.

  If not, run the update http://support.microsoft.com/kb/947821system tool >

  02:42:25 amUTC 23/08/11

• Do I need a product key after that I will be upgrading my Windows 7 Home Basic to Windows 7 Home Premium using Windows Anytime Upgrade?

  I am running Windows 7 Home Basic Edition on Dell Inspiron 660 s and want to update my version of Windows to Windows 7 Home Premium and then to Windows 7 Ultimate using Windows Anytime Upgrade.I'm confused that when I will enter the Windows Anytime Upgrade key, do I need to enter after my Windows product key updated?
  Another question which gives me a voltage, it is that I lose all my data on the hard drive, after that I will be upgrading my Windows?
  Looking forward to your response.

  There is no Windows 7 Home Basic to Windows 7 Ultimate Anytime Upgrade package.

  You have either buy an upgrade level or full version Windows 7 Ultimate retail package and use the product key as well as the Express in Windows 7 Home Edition Upgrade Wizard basic upgrade to Windows 7 Ultimate.

  If you use the upgrade wizard level Express with a touch of detail, your personal files, settings and installed applications will be kept.