Computer hangs when rebooting and intermittently does not start power

Similar Questions

• USB device not recognized. -"peripheral USB attached to this computer has a malfunction and Windows does not recognize it."

  My phone displays a warning that a "peripheral USB attached to this computer has a malfunction and Windows does not recognize it." I uninstalled the only devices that I had (printer and bluetooth) but still this warning. Can anyone help.

  Mike S.

  I suggest to take a look at the following Web sites and follow their advice:

  http://support.Microsoft.com/kb/871233

  http://support.Microsoft.com/kb/310575

  http://support.Microsoft.com/kb/314464

• Automatic update failed, and Windows does not start

  I am running Windows 7 and it does not start. Automatic update started as soon as my computer is awakened from his sleep. It closed several programs. The update had completed 30% when he stopped to restart the computer. As windows began, I got a blue screen message telling me that it didn't start. I tried to restore the system at two different times, but both failed. I'm not sure that I can do.

  How do access you the system restore?
  If through the repair of this selection of the computer in the Safe Mode menu - have you tried to use the Safe Mode?  If so, what happened?

  While waiting for a response, please try these free diagnostics, bootable: http://www.carrona.org/initdiag.html

• My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, that I tried to close all pages open and it started making a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hey guys, so I have an ASUS X502C and last night, it has become very slow, I tried closing all open pages, and he started to make a very loud noise. I couldn't even turn off, so I closed the lid and went to sleep. When I woke up it was still on the same screen until I tried to close it and turn it off. He went to a black screen with the back light on. My model is an integrated and I was afraid to take it apart and * it upward. I tried all the f keys, but only F2 works. It does not display my HD, and it does not start. What should do?

  Hello

  Looks like a hardware failure.

  Try to reinstall the operating system:

  It comes to the use of the Asus restore procedure.

  http://www.ASUS.com/support/FAQ/1006133/

  See you soon.

• XP labors heavily and Will does not start (sometimes even in safe mode.) "And if it starts in the DM, it will freeze when I try to enter to change anything).

  I have a XP computer. During use, the power supply cord unplugged and computer is dead. When I tried to restart it, it will go to the blue screen with an error, go to the screen that asks if I want to start in safe mode. It does not start in normal mode, but it does get my wallpaper and stay there. Sometimes Windows XP screen and stay there. It really starts to make a lot of noise when one of these things happens. Don't know what to do. I have a XP OS disk Dell provided with the computer. Any ideas?

  Repair the Windows XP installation - you should have all your files intact.

  A repair install will replace the system files with the files on the XP CD used to the repair facility. It will leave your applications and settings intact, but Windows updates will have to be reapplied.

  http://michaelstevenstech.com/XPrepairinstall.htm

  Good luck.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista will not load and continually reboots, recovery disk does not start.

  I have a Dell with vista on it. Recently, it has automatically installed an update and now it does not load Windows at all. It goes to the screen where I have the opportunity to "start in safe mode" "safe mode with command promt", "last known good configuration" etc. and none of these work options (all start loading them upwards and then the computer restarts just itself).

  I tried to put in the cd of installation for vista, but it won't start. I changed the options in the BIOS so that it starts from the CD first, but then it just goes to another blue screen that says: there was some sort of system faliure, and the only option is to restart the computer.

  I also tried to connect an external dvd player to see if he was not playing the disc because of a defect in material, but the same thing happens.

  I also tried out the RAM and it put it back again (a single website suggested I try this).

  Nothing seems to work! And now, I am out of options and have no idea what to try next - help!

  http://support.Dell.com/

  If it does not start where install Recovery DVD from Dell, you will need to contact Dell at the above address.
  As you say, you have changed the boot on the appropriate drive order and still nothing

  It would seem that you have a deeper problem that just a straight reinstall the problem.

  See you soon. Mick Murphy - Microsoft partner

• boots of the machine to a black screen with cursor flashing by intermittently does not start.

  Original title: slow start, get a black screen and a space bar flashing sometimes it starts not at all and I have to hard start loaded operating system and any backup disc

  slow start, get a black screen and a space bar flashing, sometimes it does not start and I have to hard start loaded operating system and don't back up drive all ides other than buying an upgrade... Please

  Hello

  • What were the changes made before the issue started?
  You can check this link:
  Computer stops responding with a black screen when you start Windows XP
  http://support.Microsoft.com/kb/314503

• 6 Lightroom will not create a catalog and therefore does not start

  Installed 6 Lightroom on a Windows 8.1 System. Provided with a serial number, but he complained that I need Internet access. Internet worked very well, so I chose to connect later. That is at least 8 times. Now when I try to run, the icon appears on the taskbar but it stalls. When I hover over the icon it shows a thumbnail of the screen to create a new catalog, but it will never develop the screen. The only option I have is to close the small window with a right-click. Then I start again and it's the same - no possibility to start Lightroom even after a reboot, then a re - install! Can not yet return to the fake my serial number validation attempt.

  I decided on a variation of your suggestion. I uninstalled and then download the latest version of Adobe's CC. However, the same problem persists. So, it was now time for some lateral thinking! Since the start-up became not even the creation of Catalog screen, I thought something was wrong there. So I grabbed a laptop, installed Lightroom and then copied the file Pictures\Lightroom on my desktop PC. It worked! Now Lightroom works well. I have to do is enter my serial number and it does not look back

• Portege M800 - noise and HWSetup does not start

  Hello

  I use a Portege M800-116 under XP - SP3.

  Problem 1:
  Connection Line-Out to a stereo system and play music with Winamp or WinMediaPlayer works fine on battery.
  As soon as I connect the power adapter, a whistle loud high frequency and UM static disrupts the experience.

  Problem 2:
  Files WAV or MP3 recording with internal or external microphone produce mediocre results.
  The resulting files include a high level of high frequency noise and hum static.
  Connect the power supply increases the problem.

  Comparing the quality of the recording and playback with my old confidence Portege M100:
  My M800 is one not only of poor quality - it's plain unusable.

  Problem 3:
  Toshiba HWSetup does not start from the control panel.
  Have you tried the ONU - and re - installing nothing helps.

  Thank you for guiding me towards a solution.

  Concerning
  T

  Hi, fly,

  I m not Portege M800 owner so I can t he test for you, but I think that if the problem occurs only when the AC adapter is connected, it s a grounding problem

  You have 3-pin or 2-pin AC/DC adapter?
  As far as I know in this case you need 3-pin AC/DC adapter and power cord.

  You should ask an ASP in your country. Guys can order a new AC/DC adapter and check your laptop to what the problem is exactly.

• I have a Pavilion dv6604nr and it does not start. the lites drive and then more nothing.

  I was using the computer and all of a sudden my screen looked like a candy cane horizontally.  I took the hard drive and not been able to get a bios screen, I'm looking for suggestions or the type of case I can buy to use my hard drive.  I bought a 2.5 from best buy and it does not match.

  Hello:

  You need to get a USB to SATA 2.5 enclosure "HDD.

  Have you thought about the plug of hard disk drive?

  The thing that looks like this?  That is removable. Just shoot.

  

• Update of Lightroom 6.5 is useless! Will not open requires permission changes and still does not start!

  Updated to 6.5 and it does not open!

  Changes in sad authorization required but when do just shows the same problem.

  Basically does Lightroom non-ouvrantes!

  No support at all on the website!

  Hi corywright,

  Please change the permissions for the sub files adobe specifically.

  1. / Library/Application Support/Adobe
  2. ~/Library/application support/Adobe

  Reference: OS X El Capitan: set permissions for items on your Mac

  If the steps above did not help, then I suggest to uninstall Lightroom 6.5, restart the machine and install Lightroom 6 and then install the updated to 6.4.

  DOWNLOAD: install Photoshop Lightroom

  Updated link: http://prodesigntools.com/swupdl/updates/oobe/aam20/mac/AdobeLightroom-6.0/6.4/setup.dmg

  Kind regards

  Mohit

• One migrated from my virtual machine to another host VSphere and it does not start

  I have a virtual machine that I've initially converted to Hyper-V to host VSphere. After I did it would start very well, but I got up two errors when starting.

  "An IDE controller is found but the VM does not support the option" and

  "A plate supporting the option not found."

  When I looked at the hard drive in the settings it looks like it is not supported. Is it because I badly converted to Hyper-V to VSphere using VMWare Converter?

  But now, I configure VCenter Server and tested a migration of these machines to another host and using the VSphere Client. It does not start now. I get an error message that says.

  "Device 'drive hard 1' uses a controller that is not supported." This is a general limitation of the compatibility of the virtual machine with the selected host ESXi version. »

  Remember that it is the same VSphere host it is running on initially. Any suggestion would be appreciated.

  If it works now - is that correct? n ' forget not to award points useful and/or correct

  I removed these entries;

  ide0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  IDE1:0. Present = 'TRUE '.
  IDE1:0.clientDevice = 'TRUE '.
  IDE1:0. DeviceType = "cdrom-raw"
  IDE1:0.startConnected = "FALSE".
  ide0:0. Redo = «»
  IDE1:0. FileName = ' / usr/lib/vmware/isoimages/windows.iso '.
  scsi0:0. DeviceType = "scsi-passthru.
  scsi0:0. FileName = ' / vmfs/devices/cdrom/mpx.vmhba1:C0:T0:L0 '.
  scsi0:0.allowGuestConnectionControl = "FALSE".

  And added to them;

  ide0:0.clientDevice = 'true '.
  ide0:0. DeviceType = "cdrom-raw"
  ide0:0.startConnected = "false".
  scsi0:0. FileName = 'PIC-JVM-v0001 - 000001.vmdk ".
  scsi0:0. DeviceType = "scsi-disk" hard
  scsi0:0. Redo = «»

  Although there is a high probability that the other six you have to do will be similar to this, they will have to be assessed individually and modified accordingly.

  See you soon,.

  Jon

• CC of the Illustrator and CS6 does not start in Windows 8.1 Overview

  When I try to run Illustrator on my overview of machine running Windows 8.1, I see this error message (in Spanish because my system language and software are in Spanish):

  Error

  Esta application none are compatible only real con el idioma del operating system. El Abra Panel control "options regional idioma y ' in el menu Inicio de Windows.

  This application is not compatible with the language of the operating system curren. Open the region and settings in Control Panel on the Windows Start menu.

  I tried switching to Spanish (Spain), Spanish (United States), English (United States) and Spanish (Chile), with no result.

  A fix was posted at: http://helpx.adobe.com/illustrator/kb/illustrator-does-not-start-windows-81.html

  We apologize for the inconvenience caused.

  Thank you

  Sliman

  Adobe Illustrator team

• I get this error message and Firefox does not start... EXC in ev handl: error: error definition property on NPObject!

  Firefox does not start and this message keeps coming back... I uninstalled and reinstalled... but nothing helped...

  EXC in ev handl: error: error definition property on NPObject!

  Disable the extension "McAfee Site Advisor" who has just updated 3.4.0 that probably out of block of addons list.

  • 'Ctrl + Shift + A' > find McAfee Site Advisor and use 'Disable', and then restart Firefox.
  • Do a Google search without problem
  • It seems that if you re - enable new Site Advisor and restart Firefox you agree. At least you know where to look if you get the error again, or research on Google to slow down.