Computer keeps looping at start of error 0x826331A7

Similar Questions

• My computer keeps showing disk failure smart error

  My computer keeps showing on the startup splash screen and also my system completely stopped backups from disk failure smart error

  and my DVD/CD ROM burner a work stoppage indicating the red light on my bright area of the lens. and has same stop indicator to the area of manerg of tasks

  The error means that the hard drive is faulty and should be replaced by a new.

• computer keeps hanging, word, internet etc error message: AppHangB1 on iexplore.exe

  System stops, sometimes recovers but more often needs to be restarted.

  Hello

  ·        You did changes to the computer before the show?

  ·        What is the full error message that you receive?

  Method 1

  Step 1: I suggest that you start in safe mode with network and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If the problem does not persist in safe mode with network, then put the computer to boot and check what third-party software is causing the problem:

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Reference: Picking up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Method 2: SFC scan to check if system files are intact:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run the Microsoft safety scanner to ensure that the system is free of infection by the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• computer keeps coming back to Windows Error Recovery

  Original title: my computer will not exceed Windows Error Recovery, it just goes back to the same page

  I have a Dell Inspiron 531, Windows Vista, it was closed and when it is restarted it went to Windows error recovery. If I select start windows normally or start the repair, it cancels the same screen.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• computer HP Pavilion laptop starts with error message disc 1 failed with code 301

  I have a HP Pavilion laptop dv6 - 6033cl running with Windows 7.  In the last days, it starts with the error message: "Test Drive: 1.

  SMART check failed

  Failure ID: RU3TRQ_5KK6PJ_MFH14J-60BE03

  Product ID: LH597UA #ABA

  HARD DRIVE 1 "

  When the computer is running in normal mode, bodyguard Windows sends messages saying that it detects recommeds and failure of disk 1, I perform the backup.

  This computer is more than 2 years old and is more under warranty.

  Can someone, please.

  Thank you very much

  Your hard drive is dying quickly and must be replaced. If you have not burnt the recovery discs again I'd get burn soon or you will have to order from HP. You will need to boot and install Windows when you put the new drive in.

  Burning discs of recovery HERE

  Example of hard drive HERE

• Computer keeps closing and give 0xc000001d error code

  Hi all, hoping someone can help me to understand this because its driving me crazy for the last few weeks, my computer decides to close, while I use it.  Sometimes, I have a box saying that it has made an illegal operation or something in this direction with the 0xc000001d error code and different error codes then after she, there is only one code each time, but they are rarely the same code.  I run a scan full on Norton and nothing came and diagnostics tool memory and had no luck with either.  I tried also remove everything I have loaded on in recent weeks but still no luck, would be very grateful if anyone know anything else I can try, thank you in advance, Michelle

  Hello

  What do you do when this happens, is it always the same or similar - operation as the race
  Games with graphics intense/high for example? See if they provide any additional information you
  can provide. Also, try to provide complete information about error messages. What type of computer - PC
  or laptop computer and other elements of the system?

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• I had a fast PC program that keeps coming up as an error and I can not find the program on my PC?

  There is a Speedy PC Pro porgram on my computer keeps coming back as an error and I can not find the program or software

  any where on my computer to uninstall or remove. I don't know where it comes from. Please notify.

  If the "program not found" error message is associated with the Windows startup, another solution is to use the System Configuration tool and remove applications from the startup list.

  Here are the steps on how to do this:

  1. Move the cursor to the Start menu and then click on "Run".
  2. In the Open box, type msconfig
  3. Heat the Enter key
  4. Click the Startup tab
  5. Remove/disable all uninstalled applications in the startup list
  6. Move the cursor to the Start menu and then click on 'stop'. After that click on 'restart'.

• My vista computer keep trying to restart loop error - driver_irql_not_less_or_equal "stop 0x000000D1"

  Original title: my vista computer keep trying to restart loop.

  He came once with the driver_irql_not_less_or_equal. blue screen exports also "stop 0x000000D1 0x00000002, 0x00000000, 0x87dfb395.» I tried to use the vista repair, but it does not start even. I can't go anywhere because I can't even use a limited boot option, is not to happen.

  Hi AllanHolland

  (1) remember to make changes?

  (2) what happens when you try to run the Startup Repair tool?

  
  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) drives, etc...)  Except the keyboard and mouse and then start.

  Step 2: run the Startup Repair tool after disconnecting all external devices, see them steps mentioned in the link below

  Windows Vista or Windows 7 unbootable and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  If the problem persists,

  
  Step 3: follow the steps mentioned in the link below to access the system recovery tools and then run the system restore
  How to access the System Recovery Options menu?

  For more information, please visit the link below

  Pick up the pieces after a computer crash
  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

• I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  I'm tryin to update my computer... I keep getting code and the error 646... I need help I am if confused as to what to do to get these updates... I tried to disable my firewall, but which is not good... Help, please

  Download and install the update/s who is / are relevant to your computer manually.
  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=974771&displaylang=en&stype=s_basic

  TaurArian [MVP] 2005-2010 - Update Services

• Computer XP does not start all of a sudden. Drive hard Self Test error #1-07 Fail. How can I find the meaning of this error of hard disk?

  Computer XP does not start all of a sudden.

  My computer is a HP Lap Top Model zd8000 bought in 2006.  Never had a problem with it before.

  Drive hard Self Test error #1-07 Fail.

  How can I find the meaning of this disc hard test error message?

  Thank you

  I tried the suggestion using chkdsk/r

  The computer ran for a long time, but the computer worked once the process is complete.

  First thing I did was back up my data, I was real worried.

  Thank you very much!!!

• Why my computer keep starting in safe mode

  Why my computer keep starting in safe mode, it doesn't let me do system restore and health comes back fine but it says I have hardware or network problems

  Well, to prevent to load in safe mode, you should be able to press F8 when your computer starts, then select start windows normally. If it says that you have hardware problems or network you can or you can't. If you start windows normally and nothing seems wrong, you can start the Device Manager to check the hardware and just go on the internet to see if the network is fine. To enter the Device Manager, right click on my computer, then select Properties, then on the new close window left click Device Manager.

• My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Error 80070020

  windows update

  My computer keeps trying to install 14 updates, but when it gets to the point where the computer restarts returned back without installing them. Get an Error 80070020, I am unable to find out exactly what to do. Every day for a few weeks he tries to install the updates and then stops to install but always ends up coming back. Can you help me please?

  Hello

  read thisL

  Windows Update Error 80070020

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070020

  and also see if this helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• Computer Dell laptop, OS preinstalled Windows 7 does not start. Error: PXE - E61

  Original title: Failure to Boot to

  Computer laptop Dell, OS of Windows 7 pre-installed. No disc restoration/reformat/install for 7. (This is bullcrap if you ask me). Does not start. Error: PXE - E61: Media test failure, check cable PXE - M0F: out Broadcom PXE - ROM

  What should I do here?

  See if there is a solution here: http://hubpages.com/hub/How-to-Solve-PXE-E61-Media-test-failure-Check-cable-Error

  J W Stuart: http://www.pagestart.com

• Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

  Original title: computer laptop (Windows 8) starts do not

  Laptop: Sony Vaio

  Processor: core i3 with 4 GB of memory
  Operating system: Windows 8
  Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
  I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
  How to solve this problem?

  Hi Sunil,

  Thanks for the reply.

  I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

  Get help from Microsoft Windows activation

   

  https://support.Microsoft.com/kb/950929?WA=wsignin1.0

  Let us know if you need assistance.

• Computer keeps restarting, blue screen after windows logo.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  Hello!

  My computer keeps restarting. It gets to the windows logo then a blue screen for 1/2 seconds and it restarts. The last good configuration does not change. Tho, safe mode works (im writing this safe mode with networking). Last night I scanned my pc of viruses through safe mode and remove all what it found, nothing has worked. I did a system restore, it changed nothing.

  I unchecked 'restart system failure' and I managed to read the blue screen. He said that windows does not start to damage my computer. Then he said something about drivers and BIOS and the error was:

  "Technical information:

  "STOP: 0X0000007E (0XC0000005, 0X83B463B2, 0XF7945270, 0XF7944F6C).

  I am running windows xp pro. And I've lost my windows disk.

  Please help, chris.

  =========================
  Not much help I guess... but maybe the
  This article offers a few ideas:

  (330182) how to troubleshoot a stop
  error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  John Inzer - MS - MVP - digital media experience