computer laptop turn on/off, restart not

Similar Questions

• Computer laptop turn on/off do not.

  My HP laptop feeds not sure what is. It used to work fine, but now it is as reached. I don't know that I have done nothing physical him so it must just be a hardware problem. I tried the static electricity thing and I tried everything to make it work, but I don't know what is happening. I don't know if the charger is broken or do something, but nothing moves.

  My HP laptop feeds not sure what is. It used to work fine, but now it is as reached. I don't know that I have done nothing physical him so it must just be a hardware problem. I tried the static electricity thing and I tried everything to make it work, but I don't know what is happening. I don't know if the charger is broken or do something, but nothing moves.

  Hello

  If you do not get the start of the HP logo screen and there is absolutely nothing on the screen, even when you have connected it to the main power supply, you have a hardware problem.

  If under warranty, contact HP.

  If it is not under warranty, contact a good computer repair workshop, local and reputable.

  See you soon.

• already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

  already have adobe CS6 downloaded on an old mac computer that is now dead, I can't open the application on this computer to turn it off, but I wand to download my CS6 even on my new mac laptop

  The license allows 2 activations, so you should be able to install on a 2nd computer

  If you receive a message that you have exceeded your activation, you must communicate directly with Adobe

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Serial number and activation support (non - CC)

  http://helpx.Adobe.com/x-productkb/global/Service1.html

• Error message: "The operating system not found" and the computer laptop (Windows 8) starts do not.

  Original title: computer laptop (Windows 8) starts do not

  Laptop: Sony Vaio

  Processor: core i3 with 4 GB of memory
  Operating system: Windows 8
  Before going to sleep, I was using my laptop & it did not work properly. then I download something, so I put on and fell asleep. When I woke up I found a message on the screen, operating system not found. I restarted. Now it starts and appearance of the new as usual Windows logo, but it does not move, I mean points keeps moving in a circle with the Windows Logo, but nothing happens.
  I tried in the BIOS and it detects the hard drive, it means that hard drive still works.
  How to solve this problem?

  Hi Sunil,

  Thanks for the reply.

  I suggest you to contact the manufacturer for activation. If you still have problems you can contact the customer support team, you can see the steps in the link below.

  Get help from Microsoft Windows activation

   

  https://support.Microsoft.com/kb/950929?WA=wsignin1.0

  Let us know if you need assistance.

• What is jucheck.exe? It flashes at the bottom of the screen from the moment where I turn computer to turn it off.

  When I turn on my computer until I turn it off, jucheck.exe flashes at the bottom of the screen. He wants to have access to the computer, but when I say no, it continues to blink. What - what, do I need it, how do I get it off the screen?

  Hello

  That's most of the malware.

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 to get infections of virus and spyware. Seehttp://www.microsoft.com/protect/support/default.mspx for more details. For international information, check your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Re: Satellite A215-S6820 - computer laptop turns off by itself

  I've had this computer for about a year now and it's just recently decided to die 3 days prior to the end of my warranty. Stroke of luck, I thought get fixed and ready to go. I used it for playing games its been quite a nice game until recently machine. I sent 2 times frist time they replace my motherboard pick it up and he didn't stay for more the same 15 last when I ran the game. Returned and all recently got back with more questions I know maybe just to send it back and have it repaired the right but I was wondering if there was a way I can fix it with little or no cost.

  Here's what's happening I have raise any game that I have played before top war hammer 40 k 2 series for about 5 minutes then turns off. Sins of a solar empire, a game where game Id nonstop until I pass out have games last 14-15 hours well lets just say that I can't even set up a game more. So I try older games yes I can play em for a while then crash. I think it is a heating problem that initially before he died he destroyed when map chart or something else. It surfing the web even now just seems to run hot then normal.

  Should I call and have em it back? I feel bad cause I like Toshiba and I just don't want that they think I'm trying to get a free patch or a new computer or what must be done to repair my laptop. I really like this laptop and products Toshiba Id want just this fix so I can be a killer of happy zombie in left 4 dead again.

  Hello!

  That s not all goes well publish your story on your laptop, but I think the same as you. I think the laptop is overheating. You can try to clean it with a jet of compressed air. This could blow out the dust from the cooling fans.

  If it doesn't work you have to bring this back to the authorized service provider. You told them that the laptop freezes in games? Maybe they don t have tested this so I have contacted the provider of service again.
  It could be that the thermal grease needs to be renewed, or else. The laptop technicians can verify this.

  Good luck and keep us in the loop.
  I'm sure that ASP will fix your problem as soon as possible. My experience with ASP s is very good and time to repair doesn t take a long time.

  Good bye

• What to do with my computer laptop windows vista which does not start? He gets a screen before before her windows error recovery screen restarts.

  Tittle says it all, I tried safe mode and the rest of them, but I can't start

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• HP envy 15 laptop: computer laptop hp envy 15 PC not logining in user

  Sometimes when I start my laptop and a connection in my user it takes a lot of time with the 'Welcome' screen and nothing happen I had to turn off the laptop and restart if no matter what soultion please?

  Hello

  Try disabling the startup of Windows 10 hybrid - you can do the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.

  Stop of the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Start Notepad and see if there is an improvement.

  If this has fixed the problem, it may be useful by turning the quick start back on - sometimes simply remove and re-create the file will solve the problem.

  Kind regards

  DP - K

• Computer laptop G 60 414 CA not connect wireless

  My HP G60-414 CA laptop is Windows 7 with all the last update and even with all the latest DLLS it connect OK with connection cable RG-45, but when I press the button on top of my PC wireless turns BLUE. I am connected via a cable modem and a CISCO router with cable and wireless ability. Sometimes the wireless connection going BLUE, but when I try to connect the laptop computer restart itself and come to usuall with the top wireless YELLOW button and the wireless connection to the bottow of my screen with an X on it. When I go to the network and connect I see 2 Wi - Fi. with a big X on them, both say not connected, one is: Microsoft Virtual Miniport Adapter #2 and the other is: Qualcom Atheros AR5007 802.11 b/g, I've been trying to solve this problem for a while now and not getting anywhere. I hope someone can help. Thank you / thanks

  Hi, Philippe:

  Check the Atheros card in the Device Manager and click on the driver tab and make sure driver installed.

  If so, the date should be around July/August 2011. Sometimes it says it installs but doesn't.

  If this should happen, you will need to uninstall the driver, and then try again.

  Other than that, I don't know what else it could be.

  Paul

• Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)

  I have HP G60-530US.
  
  I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several minutes.
  
  A lot of people seems to have solved their problems.  Not me.
  
  I updated the BIOS and also did the hard reset like 10 times.  What other options are there?
  
  I have Windows 7-64 bit.  This problem occurred after I did the updates windows 11/04/13 or 12/04/13.
  
  Mouse power switch and the power button wifi button keys are the only ones that seem to work.

  Hello

  Go back to the device, right click on the Device Manager and select uninstall - when it is finished, restart the laptop.

  Any change?

  Kind regards

  DP - K

• Computer laptop 15-ac111TX: external monitor not recognized

  After completing the last HP updates, including a BIOS update computer restarted and now cannot recognize the external monitor. Have you tried another cable and monitor and video card setting never display monitors.

  Already tried a reinstall the video driver

  Hi @olliessbrown,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP ENVY laptop and problems with the HDMI does not properly. Try to use this update all the drivers who might not have are yet.

  Please let me know how it goes.

  Click the thumbs below to thank me for my efforts!

  Thank you.

• Computer laptop HP TouchSmart desire does not illuminate

  I got a new Notebook of TouchSmart from HP ENVY, not sure of the model.

  It works fine and this morning it will not light.  It's plugged in but nothing.  I checked the plug and it is fine.

  Help?

  Dear customer,

  Welcome to the Support Forum HP and we are happy to help you

  Looks like you are not able to turn on the laptop despite trying several times

  We will surely help you with this problem

  You will find advice and the steps involved in solving this problem:

  01. remove all cables and devices, disconnect them and try to turn on the device

  02 check LED light situation and ensure that the action of the spring button / stop is normal

  Note: With No Power scenario, there would be no LED lights

  03 Exchange with a well known power cord and the AC adapter

  04 incase no adapters are available, check if the power adaptor is slightly warm

  Note: This will give us an indication that the power adapter could be good

  05. do you know if the laptop was in battery or power adapter when you used the last time

  Note: Ensure that there is no spill of liquid or cutting

  06 off the laptop

  07. disconnect the power/AC adapter and also remove the battery too

  08 hold down the power button on the laptop for a minute

  09. now we will re - insert the battery back in and plug again the power supply/adapter

  10. run Notepad.

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• HP envy m6 laptop: computer laptop HP Envy M6 does not illuminate

  My laptop HP envy m6 worked great for 3 years. I used it mainly for homework and games. I keep dormant and restart once a month. But about a month ago I stopped it completely, and later I came to start it and it would not turn. No lights or anything like that. I plugged it in and it has continued to have no sign of life. I pulled out and blew on the battery then replaced and it works. A week after I stop it again and the same problem occurred, I left hip and left a few hours back and press the power button and it came on. Today the same problem has occurred but it won't turn. So far I have pulled out and blew the load on the battery, replaced cable and left that it plugged in for hours. No forums got me a solution yet. Thanks in advance

  It is now resolved

• Why my computer to turn itself off the power?

  I can't understand why my computer starts to turn to for no apparent reason. Going to be working very well and then BONNO! It is just off.

  It drives me crazy! Whenever I try to start it upward, he wants to talk about safe mode and the proper techniques of closure. I used the Startup Repair tool and the restoration of the system offered to me by the computer during one of these episodes. I have scanned for viruses with Avast and there is not. I've defragged, cleaned the disk, removed something weird... I searched in the help pages for an answer...

  I use Vista Home premium on a 1 year old Toshiba. I recently used the drive by the manufacturer to reinstall the operating system to get rid of some nasty viruses. Everything was going along great for a month and then he started to arrive.

  Any ideas?

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  When you reinstall the operating system, you must also reinstall all the latest drivers compatible Visa for her.

  Click on the download at the top of the linked page > put in your model number, etc. > download/install the latest Vista drivers for your computer.

  Downloads 1. choose the category 2. choose family 3. choose the model   Show all models Model search filter:

  View Latest downloads» View the most recent list of drivers and software for updates all Toshiba products.

  See you soon. Mick Murphy - Microsoft partner

• Computer laptop 32 bit Vista will not shareprint with XP Office officejet v40 printer. Help, please

  I have read forums and tried everything for 4 days without luck.

  I'm trying to print from my 32-bit vista laptop to my printer of office xp... an old officejet v40 printer.

  The office prints well on this printer from xp desktop attached and I named shared printer.  All security and firewall disabled. I started at least 20 times and have tried to install unsuccessfully

  It seems that the HP driver Web page has a driver for vista, BUT the instructions are only if you hang the printer directly with the USB... No shared networking. I always thought that you could just download the dirver to the computer and it turns when you go to install it. I made for the devil to the hook to the top of my computer vista laptop directly to the printer and it installs and works fine... BUT I want it in a network or shared... no USB.

  Also, if I go to "Add a network printer" and select the printer in office shared in the list, it will be in my control panel as a printer on my laptop, but when I hit print, I get the pop box, which allows you to set the preferences, print etc, and when I hit print again, the small pop-up box flashes on for a second that it's printing paper... but no printing. Instead of this, when go to see what happened to the list of document status, I see the State of the document listed as error - printing"

  I don't know if I have vista for this printer driver in my laptop or what? I'm totally confused by the present. I read somewhere that there is no way for a computer vista laptop to print over the network to this HP printer while the printer is connected directly to a computer running XP? Is this true?

  I rarely if ever gave to be beaten by computer problems... but this one had me done bankruptcy for the third time and about to give up. Any help would be appreciated.

  THIS TIME IT WORKED! After several months of not being able to print from my computer vista laptop for my v40 OfficeJet (which is connected to my desktop XP) I decided that I would give it one more try. I used once more Bob of the 2nd ad above, as well as suggesion Eddy's instructions to select "New Port" when you arrive at the end close to Bob's instructions. THIS TIME IT WORKED! I think I'm out track somewhere when I tried to do this several months ago. In any case, I thought that I have would expand a bit on what Bob wrote just in case there's someone that who needs a little more in detail. (For a beginner, even the smallest thing can be stumbling blocks if you have never done this kind of thing before)

  On your computer vista laptop, go to printers and Control Panel. When you click the Printers icon you can click on add printer and select Add local printer (it even if it is not a local printer, but a printer that is connected to your desktop computer in another room) Ok... Then select "Use the existing Port" LP1. Then you select your printer from the list and click on it to install the driver. I think that you then click FINISH. (No you are not really over, so don't bother is not clicking on this Test Page again). Once you click FINISH, you will automatically be on the screen that shows the printers you have installed on your laptop. for help. You will then see the the OfficeJet v40 as the printer that you just installed. Highlight and right click. Then select "Run as Administrator". That will open a submenu where you and then click Properties. Then click on Ports, Add Port. Select "Local Port" and click "New Port" (as Eddy proposed). A small screen will appear where you enter now the \\NameOfPrinterYouArePrintingTo\ShareNameOfThatPrinter once you do this and click on apply and OK, you will be brought to a final screen where you will notice that the box LP1 is more verified. Place a check mark was automatically placed in the new port that you just created above IE name\sharename.  YOUR DONE!