COMPUTER LOCKED > error STOP: 0x0000C1F5 (0x00000000, 0x00000000, 0x00000000, 0x00000000)
I have an Emachine W5233 with vista. I downloaded the service pack and I tried to restart my computer and it went to a blue screen. Windows has shut down to avoid than my computer. It is locked. Can I go to fix or normal windows startup and it goes back to the blue screen.
Vista SP1, I guess? It offered by Windows Update or you are trying to install so manually?
See...
Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
http://support.Microsoft.com/kb/946084
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
Windows Vista Basic
Computer laptop bluescreens on startup with the code 0x0000c1f5.
Laptop does not completely start using installation CD.
Downloaded a patch to fix this problem, but can use it because the computer will not start.How your question about Windows Update? SP1 or SP2 is installed? Is the computer still under warranty or Service contract?
See the workarounds here: http://support.microsoft.com/kb/946084 ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft
-
Blue error screen: 0x0000c1f5
When I was installing windows update for service pack 1, it does not settle and to restart, it's what happens every time
1.) Windows error recovery screenWindows could not start. A recent change of goods or hard software could be the cause.If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem. If food has been interrruptd during startup, choose start windows normally.Launch of the repair (recommended)Start windows normally.to choose the repair start or start windows normally appears a blue screen with the following detailsA problem has been detected and windows has shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:Check to make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware or software for any windows update, manufacturer you might need.I f problems continue, disable or remove any newly installed hardware or software. Disable the BIOS memory options such as implementing caching or shading. If you need to use safe mode delete to disable components, restart your computer, press f8 to select advanced startup options, and select Safe mode.Technical information:Stop: 0x0000C1F5 (0x00000000, 0x00000000, 0x00000000, 0x00000000)I also tried to boot the system in safe mode. The system still does not work.Hello
This, so you can see the bluescreens.
Windows Vista restarts automatically if your computer encounters an error that causes
It crashing.
http://www.winvistatips.com/disable-automatic-restart-T84.html==========================================================
This error is somehow a special case:
Stop error message when you start a Windows Vista-based computer: "0x0000C1F5".
http://support.Microsoft.com/kb/946084How to get around the Stop error 0x0000C1F5 on a Windows Vista-based computer
http://support.Microsoft.com/kb/970101/en-usStop error when you start a Windows Vista same computer if the hotfix 946084
is installed on the computer: "0x0000C1F5".
http://support.Microsoft.com/kb/958069/en-usOther methods:
Workaround for STOP 0x0000C1F5 / 0xC1F5 / C1F5 / BSOD / CLFS. SYS / KB946084
http://www.delmartian.com/nullpointers/workaround-for-stop-0x0000C1F5-0xC1F5-C1F5-BSOD-CLFS.sys-KB946084.htmlSystemRescueCd
http://SysRescCd.org/Main_PageVideo fix
http://www.YouTube.com/watch?v=Y_OjCkbZyTwVideo Fix - Linux
http://www.YouTube.com/watch?v=SwSvIhyZRVc================================================
For the most part, the BlueScreens (the above is a special case as noted)
Pick up the pieces after a computer breakdown - see what to do if Windows won't start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crashCheck this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
After installing my latest drivers for graphics card, restarting my computer to reflect changes, as it starts a blue screen because of a STOP 0x0000007F (0x00000000, 0x00000000, 0x00000000) error and he said also he is dumping physical memory. I can easily get rid of this error of system restore, but I need my graphics drivers to play games and to load certain programs.
PS: If it helps my computer sometimes freezes during startup
Hello
Check with support of the manufacturer to system and device video/display as they
are those who write the drivers. Also check with their forums as it could be called
questions. These companies write drivers.For the problem of freezing at startup.
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
my computer becomes a * STOP: 0 x 00000050(0xf226dc2E,0x00000001,0xEE6SSF10,0x00000000) screen and States blue, I don't know what to do about this
It is the same procedure. Have you checked all the links in the post?
I want to thank you for your time. I couldn't hardly on internet. Microsoft helped me and fixed it is a program that was not compatible. Thank you once again
-
InnSafe in startup mode, blue screen, STOPS. IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A (0x00000000.0x00000000.0x00000000.0x00000002.0x00000001.0x804DC11D)
I don't know how to download the content, normally I could rectify, but not this time, how it is done? racey21
-
Cannot start windows STOP error code: 0x0000C1F5.
OT: Tent Windows Start, fails, try to restart, and fails again. STOP error code: 0x0000C1F5. Does not start with the DVD of resettlement. Won't do anything.
Any suggestions?Hi Kya,
You have made no changes to the computer before the broadcast took place?
You can try the steps from the following links:
This problem occurs because the Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista may not start during startup until the offending disc is removed from the computer.
How to get around the Stop error on a Windows Vista-based http://support.microsoft.com/kb/970101 computer 0x0000C1F5
-
How can I fix a STOP: 0x0000C1F5 error?
How can I fix a STOP: 0x0000C1F5 error on my PC when whenever I start the computer I get the blue screen stop error, even if I load the program in Windows Vista Business disk?
Hello
I suggest you to follow these steps and check if that helps.
Method 1:
Try to start the computer in safe mode and check if you can start:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2:
Try to perform the verification and startup repair if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
It will be useful.
-
HP mini 110 computer: password check failure fatal system error stopped CNU9384ZG7
Can someone please help. I've not turned my HP Mini computer in a few months and when I did I got this error. Password check failure fatal system error stopped CNU9384ZG7.
Please enter = e9lofuv0hx
Kind regards
K N R K
I work for HP
-
password check failure fatal system error stopped CNU0133TLF its a computer hp mini CQ10. I forgot the password. can anyone help?
Hello
Come in:
e9l13ffak8
-
Original title: mcshield is a nightmare for me.
McShield is a nightmare for me. Its location is c:\program files\common files\mcafee\ACore\mcshield.
When I try to stop it in services.msc I get the error "could not stop McAfee Amti-Malware Core service on Local computer. Error 5: access is denied. »
I have administrative rights at sign on. How to stop this monster?
http://www.pchell.com/virus/uninstallmcafee.shtml
read this through
If it was me I would uninstall McAfee, it is not highly recommended by someone I know.
Once it is removed, try a free antivirus, I use MSE, but you have to read the instructions first!
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Download MSE
http://experts.Windows.com/w/experts_wiki/89.aspx
MSE installation checklist
If you choose to use Mcafee, download autoruns, which shows which takes over at the start and you can disable here.
AUTORUNS
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
Above is autoruns to loadup questions
If you still can't find the entry in the registry, download Autoruns. Let it finish the scanning, then click the Services tab. Find the name of the service 'wrong' in the left column ("Autorun entry"). Right click and select ' go to '. You will go straight to the appropriate entry in the registry for editing.
I would like to examine what you load at startup. You should see if you have any programs from loading during the startup process, which can be changed on request.
With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.
Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.When you use Autoruns, you will need to click on the "Connection" tab to see what runs at startup.
-
Original title: SCRIPT SLOWING COMPUTER
COMPUTER STOPS SEVERAL TIMES. A MESSAGE IS READ "A SCRIPT SLOWS DOWN YOUR COMPUTER. IT STOPS"AND IT MADE A
Hello
1. when exactly you get this error message?
2. don't you make changes to the computer until the problem occurred?
I suggest you to try the steps below and check if it helps.
Method 1: I suggest to restart the computer and keep tapping F8Key since the boot advanced options, select Disable automatic restart on system failure and press to enter.
Method 2: Try to boot in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 3: If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
original title: The Audio service is not running windows vista
Hello
I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.
I saw it in Event Viewer
The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.
Thank you
-Majid
These error messages are a pain in the neck to extract useful information.
I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.
If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.
Realtek and NVIDIA, for example get stuff good free audio driver.
If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period
-
Hello, I recently built a computer and installed all the software, drivers and updates of windows that I needed. Go and try to play games, I can play for a little bit. Then my computer crashes or I get BSOD with the error Stop: 0x000000F4. Generally before that happens, Skype will plant give me a message that says "error disk i/o" If that helps. How can I fix this problem so that this error does not happen again? It happened several times. I tried to reinstall the CMOS battery on the motherboard. I have the latest firmware of my SSD and drivers for my card mother and graphics card. My specs are:
Windows 7 x 64
I7 - 4770 k
ASUS Z87 - a
Corsair Vengeance 8 GB 1600 Mhz
Modular power supply Corsair HX750
Liquid chillers H80i Corsair
EVGA GTX Superclocked 760 ACX
Samsung 840 120 GB SSD (boot disk; the games installed on it)Hello
To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.
If you don't know where the DMP files, here's how to get to them:
1. go to the Windows\Minidump folder.
2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.If you plan to use Skydrive, but do not know how to download it, please see the following:
http://www.WikiHow.com/use-SkyDrivePlease note that all "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove files DMP when using because of their place too.
If your computer doesn't generate DMP files, follow these steps:
1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.
2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."
3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > failure > ensure there is a check mark next to "Write an event to the system log" > make sure that "automatically reboot" is unchecked.
Ensure that the partial memory image is turned on and make sure the path is % SystemRoot%\Minidump.
4. check that the viewers is ENABLED:
Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.
If you can not get into normal mode to do this, please do so via Safe Mode.
Kind regards
Patrick
-
Original title: Windows has shut down to not to damage the computer
When I go to install windows, it gets a blue screen with this error:
STOP: 0X0000007B (0XF78D2, 524, 0XC0000034, 0X00000000, 0X00000000)Hello
See the article below that could be useful.
Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
http://support.Microsoft.com/kb/324103
Maybe you are looking for
-
How do I activate my setting Do not not track?
I can't find anything that leads me to these many options that you claim to have on my mobile. Can you help me?
-
Hello!The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never en
-
Portege R500 - no work Mat * a DVD - RAM UJ - 844 S USB Device
My DVD drive has stopped working and the properties of the device show that "Windows cannot initializze the device of this material (Code 37) driverLook for solutions that produce nothing and I tried to update the driver but it says that I have the c
-
Re: Qosmio G50 - 115 - can I connect a Xbox?
Is it possible to connect an Xbox (or an Xbox 360) to a G50 so that it does not need a separate monitor? It seems silly if it does not exist with respect to a student that the G50 has everything - speakers, TV reception etc.
-
I am running Windows XP Professional, can I upgrade to Windows 7 or Vista?
The upgrade to Windows XP Professional edition I am running Windows XP Professional, can I upgrade to Windows 7 or Vista? I want to run the iCloud but need a more recent version to do. Thank you.