Hi, need help, Windows stopped from STOP error code: 0x0000000A (0x00000000.0x00000000.0x00000002.

Similar Questions

• Cannot start windows STOP error code: 0x0000C1F5.

  OT: Tent Windows Start, fails, try to restart, and fails again. STOP error code: 0x0000C1F5. Does not start with the DVD of resettlement. Won't do anything.
  Any suggestions?

  Hi Kya,

  You have made no changes to the computer before the broadcast took place?

  You can try the steps from the following links:

  This problem occurs because the Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista may not start during startup until the offending disc is removed from the computer.

  How to get around the Stop error on a Windows Vista-based http://support.microsoft.com/kb/970101 computer 0x0000C1F5

• I need help to update my computer (error code: 80070424)

  original title: I need help to update my computer

  I could not update my computer for more than a year. I searched for the cause of this and have been unsuccessful. Whenever I click search for updates, it gives me errors, and then I click on get help with errors and tried troubleshooting but have not been able to solve my problem. Lately, he has been interfering with the update or install new programs. Now I can't update my Itunes or Ipod. I can't upgrade to Windows 7. I can ' t use microsft word because everytime I try to install or update these things, it won't let me. I've been putting off not to worry so much about the updates, but they have reached a limit, when my computer became difficult to use. The error code is 80070424.

  Restore the system to factory settings.  Install applications from their media keys/serial numbers and product, that you put aside.  Restore your data from backup.

• Microsoft Windows stop error code 12

  Hi, I keep getting this error with windows code 7 can any one explane what is it please

  The problem is the firmware / BIOS.

  From: "Firmware Corruption of memory during sleep Transitions.

  Windows 7 and Windows Server 2008 R2 checksum automatically the content of low physical memory 1 MB before and after a transition of sleep. This checksum process allows Windows to detect memory corruption and report any corruption as an error in the system event log. In the event of corruption of memory in the lowest 1 MB of physical memory during a transition of sleep, hardware application logs event ID layer (HAL) 12 in the case where Viewer

  ...

  Troubleshooting steps

  Manufacturers of systems or firmware developers must investigate and resolve corruption through a transition of sleep. In many cases, the resolution of the problem requires an update to the newest BIOS for the platform.

  The resolution must take the form of an update of the BIOS.  If there is no BIOS that does not cause in the above message, pester system manufacturer or motherboard manufacturer or the source of the BIOS on the problem.

• Hello [need help on 1 and 2 error codes]

  Hello

  I have a code error 1 or 2 that is displayed when the update of late July 2015

  has anyone there the same problem?

  [Title edited for clarity... MOD]

  Code 1 discussion https://forums.adobe.com/thread/1434528

  Code 2 https://forums.adobe.com/thread/1595922

• Try to update windows - (8007000D - has no error code) stops windows completely updated. Fixes for this error code?

  I tried to completely update of windows, but the 8007000D error code keeps causing the update fails. The update is for - Cumulative Update for Media Center for Windows Vista (KB982480). Could you be it someone please let me know if there are patches to get rid of this error, or get the update to pass by? Thank you!

  Hello

  You are able to install some other updates?

  I suggest you follow these methods and check.

  Method 1: Run the fixit.

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/   

  Method 2: Run the clean boot and install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  If the method above does not work, proceed to the next method.

  Method 3: download and install the Cumulative update for Media Center for Windows Vista (KB982480) from this link.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6256

  If the method above does not work, proceed to the next method.

  Method 4: Rename the Software Distribution folder.

  Rename the temporary Windows Update Software Distribution folder. To do this, follow these steps:

  1. Open an administrative command prompt window.
  2. Run the following commands and press ENTER after each command:
  3. 1. Net stop wuauserv
     2. CD %SystemRoot%\System32
     3. Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
     4. Net start wuauserv
  4. Try to install updates again.

  Important: When you use this method, the following problems occur:

  ·         Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.

  ·         When you remove the Software Distribution folder, your download history is deleted.

  ·         If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.

  Note If the problem is resolved and you can successfully download and install the updates, you can safely remove the SoftwareDistribution.old folder to recover disk space.

  I hope this helps!

• HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

  Hello

  Please do not type in capital letters because it's difficult to read and considered to be shouting.

  ---------------------------------------------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• Unable to get the windows updates. Get error code 80072EFE. Help!

  Unable to get the windows updates. Get error code 80072EFE.  Help!

  Gary,

  ERROR_INTERNET_CONNECTION_ABORTED 80072EFE

  You may experience temporary errors related to connection when you use windows update or microsoft update to install updates http://support.microsoft.com/kb/836941

  by running the Fixit on this page, you can reset to windows update components.  but, if there is malware present, she will continue to reset the connection to the update servers: how toreset windows update components

  suggest you download and save the Fixit.  then conf is the boot vlean system before you run it:http://support.microsoft.com/kb/971058

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7http://support.microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native vista firewall is now on if a 3rd party firewall has been used previously.  now run the Fixit and choose the default mode.  restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode.  turn it back on when he finished the race and updates.

• I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. Thank you! __

  I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!

  I need help importing audio from a reader audio tapes and then burn it to a cd or dvd. We have some old audio cassets with our children and other parents record and want to put them on a CD or DVD media. I can't understand this. Thank you!

  =================================
  The free Audacity software might be worth a visit:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Features of Audacity
  http://Audacity.sourceforge.NET/about/features

  How to scan discs vinyls, audio tapes and minidiscs?
  http://Audacity.sourceforge.NET/Help/FAQ?s=recording&i=records-tapes

  Transferring tapes and records to computer or CD
  http://wiki.audacityteam.org/index.php?title=Transferring_tapes_and_records_to_computer_or_CD

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• Store Windows cannot install software, error code: 0 x 80248014

  Store Windows cannot install software, error code: 0 x 80248014

  Original title: Windows Store

  Hello

  
  I suggest you rename the temporary folder C:\Windows\SoftwareDistribution:

  1. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net stop WuAuServ

  2. click on start, run, type: %windir%, and then press ENTER.
  3. in the opened folder, rename the folder C:\Windows\SoftwareDistribution to SDold.
  4. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net start WuAuServ

  Visit the Windows Update site to check this problem. If it works then it's a corrupted Windows Update file and we need to delete the folder in which it resides.

  Hope this helps, good luck :)

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update 8007371 B error code «»

  I spent from Vista to Windows 7, use PCMover to help transfer. I'll have two problems (1) won't install Norton anti-virus (Norton is okay) and update of windows gives me an error code "8007371B".  Any ideas? Thank you

  Try:

  Description of the system update tool for Windows Vista, Windows Server 2008 for Windows 7 and Windows Server 2008 R2http://support.microsoft.com/kb/947821>

  The 0x8007371B error can be caused by an irregularity of the system that theSystem Update Rpoints Tool may be able to solve. However, the tool may be unable to fix all instances in which these errors occur.