Computer model of lens distortion
Hi all
When you calibrate the image on NI Vision Builder, I would like to ask what is the use of a "model of computing lens distortion. What is this for? It is an option that is ignored when measures are taken to the image, for example, of a component. What happens when you turn it on or check it?
Thank you
based on what you have installed for ccd for imaging your lens have certain Optical Aberrations there are 6 type of such Aberrations you learn more on this subject
it is one of the Aberrations is distortion in this case data in the area of the distorted image and are not true because of the defeat of optical lens
If you use this image for example distance measure will be impossible to get real data and first of all, he must correct the image
for image correction you use grid with the same size and distance, and ofter there is formula polynomial with coefficients k1, k2, k3 solve this problem
also a few famous lenses have their own k1 k2 and k3 calculate the coefficients which was by the company producing them you can use them to make
For more information about this, you can check the photoshop tools
Tags: NI Hardware
Similar Questions
-
Boot Camp x 64 is not taken care of on this computer model
Hi all
I need help to install Windows 7 on my imac I have listed all the specs here:
24 "iMac - early 2009 - Intel Core 2 duo E8135 - 8 GB - running El Capitan
I have several versions of windows can I install:
XP Pro, Vista (somewhere), version of 32-bit Windows 7 upgrade, Windows 7 full install the 64-bit version
The problem I encounter is that, while I was able to install the full version of Windows 7 (64-bit), I am unable to find any version of the Boot Camp software, support that will install properly. When I try to install the downloaded software when I created my PC boot camp partition it gives me the message "boot camp x 64 is not supported on this computer model."
Does this mean I can have only a windows partition that is running properly if I buy a 32-bit version of Windows 7? Is there a way around this, like the installation of Snow Leopard first on my mac and the corresponding version of boot camp. I guess I could start there and make all the upgrades?
Thank you in advance for your help!
Please see install Windows 7 and previous versions on your Mac using Boot Camp - Apple Support for the W7 32-bit and 64-bit for your model installation details.
Your model has certified 32-bit drivers only, even if the Mac 64-bit Windows support using a 64-bit processor.
iMac
Mac model Windows 7
64-bitWindows 7
32-bitWindows Vista
64-bitWindows Vista
32-bitWindows XP
32 bitiMac
(24 - inch, early 2009)- 4 - DVD DVD -
Dear Sir.
Please give me a software driver for my laptop
as this network controller driver and the bluetooth controller and driver vga is not install my webcam also not working so pls give me the driver for my computer model hp laptop: - 15r - 074tu
Please follow the steps as indicated below to locate the hardware ID
Step 01. Click on the Start button and type in Device Manager in the start search box
Step 02. Please launch the Device Manager
Step 03. Expand please display adapter
Step 04. If please, right-click on the network, the chart and the Bluetooth card/adapter and click Properties
Step 05. Click details on the top and select hardware ID from the drop-down list
Now, you can see the complete details of the hardware ID. Please share the information with me, then
I can help you find the right driver
Kind regards
K N R K
I work on behalf of HP
-
Is docking station compatible with computer model C6470 VB041AA #ABA?
Is docking station compatible with computer model C6470 VB041AA #ABA?
Hi Bryan,.
You're right, the computer is a Probook 6470 B. I also noticed in your chart that the docking station power is estimated at 90 watts. How I plugged the power lists 65Watts on etiquette, which may explain why it does not work very well. I think I must have caught an old powersupply in my bag for laptop computer to my upgrade of the previous work computers. Another food I have is rated at 90 watts; I'll give this one a try.
Thank you
Pete
-
Who has the computer model E5 575 G 53VG?
I'm looking for someone with computer model E5 575 G 53VG and I would like to know the name and the brand of the 256GB SSD that comes pre-installed from the manufacturing. He can be found simply by right-clicking on the drive, select Properties, and then click the Hardware tab, and the name must appear.
Or you can pull up the Device Manager and look under disk drives, the name should also be there.
Thank you
laurent_14 wrote:
Hello
This model comes with a Toshiba, Samsung or Lite-on SSD of 256 GB.
I can attest to the Lite-on SSD being present on two different purchases this laptop model.
-
How to get the effect of lens distortion in CS6
I see online videos that have some presets with correcting lens distortion GoPro for CS6. Yet my CS6 is not that, and the app is updated. How can I get these effects of update?
-
How find out who made changes to a virtual computer model?
Greetings!
We do turn several ESXi 5 boxes under vCenter Server 5 and have several directors. A few days ago one of the admins made a change to a virtual computer model and we want to know how find out who.
Thank you!
Have you checked the tab tasks & events of the model?
-
Point Panamoric - problem of lens distortion
Hello amazing artists there,
face problems while "stitching" of the panoramic photos I've shot. Basically, of Phtoshop file > automate > Photomerge and Edit > Align/auto-merge of layers works well, but FAIL on the LENS DISTORTION.
I had tried to remedy with filter > Correction of the lens, but still not get a perfect result.
Please see the image as an attached the results, you can see the building looks like twisted. Please check/download the images of the source of the http://www.prashanthvfx.com/130330_adobe_stitch.html.
Any solution?
Merge layers puts out Photomerge, and then choose Filter - Adaptive Wide Angle in the menus.
There are videos on how to do floating around, but basically you draw lines along the curved parts you want to be straight, so you can manipulate them.
It will start to deform the image some SE if I remember.
I dabbled with it several times, but I remember not really smooth out a pano of the bridge Snake River Gorge in Twin Falls.
-Christmas
-
How to correct lens distortions?
I remember seeing a video tutorial on fixing lens distortions, but I don't remember that video is and who made it. Can someone show me how to correct lens distortion in Photoshop CS4? I shot the photo with a Nikon widen Angel 24mm lens. The picture looks somewhat distorted. Any help is appreciated.
Filter > distortion > correction of the lens
http://help.Adobe.com/en_US/Photoshop/11.0/WSF65FB40F-00F5-445A-BD9A-38B3737A9A19a.html
-
Computer model number became different
I have supreme buy Hewlerd PAckard SR1750nx and I have intertwined on the motherboard. Now when I do a scan of the system the computer like hp pavilion a1310 picks it up. How does this happen? I know that the Sr1750nx and the Pavilion has 1310 have the same motherboard. I can make SR1750nx yet so maybe my original restore disk will work. I also reinstall an operating system, I bought on ebay, because the recovery disc are not recognized by the computert.
Is it the motherboard?
Here are the specifications of the desktop Compaq Presario SR1750NX and the HP Pavilion Media Center a1310n desktop. You are right in saying that both models use the same motherboard. When you replaced the motherboard, replacing out an a1310n and explains why you see what you're doing. The replacement card has very probably a model different name, product number, serial number, and software build ID then what is printed on your computer. You have 2 choices to fix this;
(1) take or send the HP computer or a Center authorized service and the "Tattooed" computer with the right information, such as indicated in your case. "Tattoo" is the process of writing of HP/Compaq to the BIOS system information. This service can be a significant cost.
(2) purchase HP a1310n recovery disks (5092-3066-Windows XP MCE SP2 recovery disc + Supplement 1 (61NAemMPC1/2)) of the third party provider ComputerSurgeons.com
Please send Bravo
-
Dear...
I bouight last month a Sony vaio laptop. Model SVE151D11M
I did a recovery of the value.
Now, the computer no longer starts and demand for recovery disks.
But I do not have such a set.
How can I get a recovery set, so I start from my laptop again.
Please help me and thanks in advance,
Kind regards
Down Jonker
Hello, I need a cover for my Sony Vaoi SVE151D11M model
Thank you
Kind regards
Down Jonker
-
Incompatible recovery disc with my computer model.
I have HP Pavilion Notebook dv9074ea. Windows Home Edition SP 3. I just burn two DVD recovery. When I started with the #1 recovery disk, I got the message: this recovery CD is not compatible with your model of computer (paraphrase - my OS is Norwegian). I am very proud of my computers altruism because its creating discs for other recovery models computer, but it is very frustrating for me to be the owner of this particular model.
One thing struck me as odd however: he says that this 'CD' is not compatible, even if it's a DVD.
Is this a common problem? Do I have to burn the CD 12 instead of 2 DVDs? (wait, I can't burn a new version, it is a time thing)
Thank you
Stootkakka wrote:
Hey, thanks for the reply =) I'm not very tech savvy - has not been able to enter a menu of F1. BUT, I think you're right on the motherboard. I never made the connection, but last year my computer was being repaired (an affiliation of the dealer, nothing to do with HP I think). They changed the motherboard, but didn't touch anything else. My computer is pretty old, so I think that they didn't have my motherboard type and probably replaced by a new one. Who would solve why my drives do not work?
Is there a way to do my recovery program to know that my motherboard has changed? Or download a new program of recovery for my motherboard type?
Usually, replacement motherboards do not have the necessary bios 'tattoo', Yes, this will prevent the work recovery disks.
HP is the only one who can set the bios tattoo unfortunately.
-
The computer says that my model is asus k73e/k73sd/k73sv series but whose one of the computers is this?
Start > run (Win + R) > type msinfo32 , and then click OK.
Your system model number is mentioned here.
-
What computer model Dell laptop is better for me?
Hello world
I am a user of Dell Latitude D630 and thinking about buying a new computer dell laptop. Anyone could offer some advice, please? Do not play games, but I have to use the game engine software (as unreal, Unity3D and etc.) and sometimes a bit of 3DS MAX and photoshop for design work. So I opt for a discrete graphics card. My budget is flexible, about $1,000 + - $200. I expected a laptop with good cooling system and do not burn the graphics card as D630...
I am looking at (1) Inspiron 15R special edition with graphics Radeon 7730, (2) XPS series with 7570 Radeon or nVidia GeForce graphics 630 M. The Inspiron 15R really has a strong configuration and reasonable price. But how to it is cooling and noise? However, XPS series shine! But I do not know whether his graphics card will meet my need... No idea cools, either.
Thanks to all in advance! All opinions will be appreciated! Recommendations for other models are also welcome!
All laptops at $1,000 or more of these requirements will be a compromise of performance that will hinder your work and applications - if that's what you have a budget, buy a desktop computer - you will get much more performance for your money.
-
Pointer to Touch-pad which disappears to a computer model of Windows 8
Hello
I'm working on a Windows laptop, 8 model, and recently I have been encountering a problem with the touch-pad. Occasionally, for no reason at all, once the mouse pointer icon disappears from view, and I rely on the touchscreen to do my job. Would not a big problem, if all the applications worked fine with my awkwardly-large fingers. I think that the touch-pad of my computer has been disabled somehow. Please let me know how I can fix this problem as soon as possible.
Thank you
Melody
I would say as a starting point to do two things:
- Open the Windows Store app and get the Windows 8.1 update which is pending. It fixes hundreds of problems.
- Go to the website of the manufacturer of your computer (Dell, Acer, HP, etc) and choose your model and download the latest graphics drivers available, they have for you.
Maybe you are looking for
-
In a Satellite A100-599 Express card slot
Hello.. I own a laptop Satellite A100-599. Many sites on the internet, I see my laptop with a PCMCIA type II port AND a slot for card together Express. But on the toshiba site there is no explanation like that.What is the law? Anyone using an Express
-
What happened to DVD Studio Pro? Has been integrated in some kind or use put on hold?
What happened to DVD Studio Pro? Has been integrated in some kind or use put on hold? Is there a product alternative studio now in X?
-
The cutting of a legend against the axes in tiara 2011/2012
Hello until DIAdem 2010, it was possible to cut a legend in a report against the axes, but not against the chart.To do this, I had to create the layout in the DIAdem 8.1 set the clipping and then convert TDR LPD.As you can see below, the legend of ti
-
OfficeJet J6450 All in One printer cartridge wrong cartridge, but it is not
I have an Officejet J6450 All in One Printer. I only use the new HP cartridges (not renovated, manual not refilling). I installed a 74XL into the printer about a month with expiration of 02/11/2014. It is still more than 1/2 full and very well pri
-
Update of BBM on my Z30. A colleague has also updated BBM on his Z10 - but the 'withdrawal' does not work. The two phones have been restarted. This feature requires the new BlackBerry operating system?