Computer pavilion laptop G6 - printer does not print

Similar Questions

• My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal?

  Hello

  My Hp Pavilion laptop 2244sa g6 does not come with the product key for windows8. Is this normal? I can't see it anywhere, should I worry?

  Some laptops, like my Envy 17-3002ea loan, have the certificate of authenticity Windows hidden in the compartment where the hard drive and the battery are.  First try.

  Other portable latest and which may include yours, have the Windows license key encrypted in the BIOS.  There is a thread on the Microsoft communities that verifies that. The thread is worth reading.

• Computer HP laptop window vista does not load please help

  someone asked this question and I have the same problem!

  I have a laptop HP who have dirtied pre-installed Vista and for some reason after installing automatically 3 updates the other day, he is not now charge up. The laptop is plugged in so it can configure 3 updates without failure (due to something like battery dying).

  When the laptop turns on, it gives me two options:
  • Start the reboot system (recommended)
  • Start Windows normally

  If I click on 'Launch Startup Repair', he comes back to do the same screen with them two options and when I click on "Start Windows normally", the laptop everything restarts and then return to this screen.

  Thus, F8-ing it does not help either - it gives me options like computer repair, Mode safe mode, last known good, etc... but none of these helped either.

  I looked around online for a solution, but most say on the use of the Vista installation CD, but the operating system is installed on a partition on the laptop (also there are files on what I would come down)... However I do not know if I can get it to boot on the installation partition either

  I tried F8, F11, F12 and nothing works

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Help, please

  I have a Pavilion dv6 laptop Notebook with Windows 7 64 bit Home Premium edition. After formatting the computer's hard drive, I reinstalled Windows 7 64 bit Home Premium edition.

  Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

  In Device Manager I see 2 devices linked to the internet wireless:

  1. other devices > Network Controller - it has a yellow warning sign then him - the error is to have no driver installed.

  2 network adapters > Realtek PCIe FE Family Controller - "this device works properly."

  Here is the hardware ID's for the network controller is not working: PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01
  PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C
  PCI\VEN_10EC & DEV_8176 & CC_028000
  PCI\VEN_10EC & DEV_8176 & CC_0280

  What should I do? How can I get my Wi - Fi to work again?

  Thank you...

  Hello:

  Here is the link for the driver you need for your Realtek RTL8188CE 802.11b/g/n WiFi Adapter.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-100014-1&mode=5

  Paul

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help please?

  I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.

  I bought a new hard drive, so I had to reinstall Windows.

  After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.

  In the Device Manager, I see that there is an exclamation to these exact components:

  Standard VGA graphics card

  BCM20702AO

  Ethernet controller

  Network controller

  PCI device

  PCI Simple Communications controller

  SM Bus controller

  Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.

  I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)

  Can someone tell me what to do? I'd appreciate any help. Thank you.

  Hello:

  Here are links to the drivers you need...

  First, install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Then, install the graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95652-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  BCM20702AO:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help?

  I have a hp430 laptop with Windows 7 64 bit ultimate. After having a kind of pilot/virus that froze my computer, even once, I reinstalled my laptop with windows 7 64-bit ultimate.

  Now it cannot connect to the internet through wireless. I tried all the basics: by pressing the button to turn on the WIFI on my keyboard, restarted my computer, which allows to disable the internet connection in the network area, etc..

  In Device Manager I see 4 devices linked to the internet wireless:

  1 > 1 other devices > network controller

  2 > pci device

  3 > pci simple communication controller

  4 > Sm bus controller

  -all the features above then have a yellow warning sign-the error is to have no driver installed.

  What should I do? How can I get my Wi - Fi to work again?

  I found a solution

  http://www.PCIDatabase.com/

  go through that link above just enter #ven in the name of the Salesperson box and #dev in the dev on search button vill box.click a list of devices .go through the device u pc download of the combination of this vill...

  for #ven and #dev, we need to click on 'network controller', which need drivers in Device Manager.

  Then click on the Details tab. In the property drop-down list, select the second element (Hardware ID).

  We can get to the #ven and #dev of the first string you see in the window...

  hope this helps others...

• my computer hp laptop window xp does not see his CD/dvd-rom after fomating of the system

  How to restore my CD-ROM/dvd-rom for my system again? This has happened once the system has been formatted. HP Windows xp

  Hello

  You receive messages or error codes?

  This can happen if the CD\DVD drive requires updates to the firmware or need to assign a drive letter for the same.

  Since you formatted the Windows XP system, you can check out the link to HP support and check if it helps.

  CD/DVD drive is not detected (Windows XP, ME or 98)

  Important: Change the BIOS (Basic input output system) / Semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  We can also refer to article and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important: The article mentioned above, including the HP support article contains steps to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  How to back up and restore the registry in Windows XP

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Why cant I after installation of my printer in my computer lexmarkz23 z33 toshiba laptop will it does not print

  Have you looked on the Lexmark web site for help? There is a firmware download here:

  http://support.Lexmark.com/index?locale=en&page=product&ProductCode=Z33_COLOR_JETPRINTER&segment=support&UserLocale=en_US&FromPage=null#1

  Are you sure that your printer is the default in the printer folder? You can print a test page?

• Windows 7 and install/recognize the problems of printer HP LaserJet P2015 error - USB Device not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  Title: Windows 7 and install/recognize printer HP LaserJet P2015 teething problems...

  I have a dell inspiron that was originally windows Vista and I changed to windows7.  I have a LaserJet where I work, a HP LaserJet P2015 printer and when I plug in the USB, it says (peripheral USB not Recognized One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.

  How and what should I do to get the printer going or to get the computer to recognize.  Installation CD will not work and I looked online and downloaded drivers but still the same thing.

  Hi LOliver,

  Method 1: Run the hardware and peripheral troubleshooting tool and check if it makes a difference.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Disconnect all USB (Universal Serial Bus) devices connected to the computer (unless your mouse and keyboard). Connect the printer and check to see if the problem persists.

  Method 3: Connect the printer to a different USB port and check.

  Method 4: Reinstall the USB (Universal Serial Bus) controllers.

   First of all, please disconnect all USB devices and then perform the following steps:

  (a) click on 'Start', type device manager in the search bar and press "Enter." If necessary, click on continue.

  (b) in Device Manager, double-click to expand the "USB Bus controllers", right-click on the "host controller", click "Uninstall" and click "OK".

  (c) repeat step 2 to uninstall all items under 'USB Bus controllers'.

   

  Then, restart your computer and windows will automatically reinstall all USB controllers.

   

  HP printer drivers- ensure that you download the driver appropriate for your device model package.

   

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP Pavilion 15 laptop: Free WiFi does not

  My laptop (HP Pavilion 15 Notebook PC) does not connect to the internet. The problem started after I downloaded AVG Zen, I have shortly after uninstalled. State of the control of HP network connection arrives with two messages of "IP not subscribed (109). I don't know what it means that this is the first time I saw him. I rebooted the WiFi router and my laptop several times and there was no change. When I troubleshoot WiFi he said it might be a problem with the driver for the WiFi aidapter. I don't know how to solve them. The WiFi icon has full bars but has a little (!) next to it. Someone help me please. I can fix it manually, or do I have to consider for repair?

  In the taskbar, icon search, type recovery.

  Recovery should appear at the top of the search box.  Click on the recovery.

  Then the control panel should open, and you select open system restore.

  Then follow the instructions on the screen to restore your computer to a day that it worked OK.

  Select the closest available restore point to before installing this software.

• I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. [was: ochre]

  I have a problem loading Illustrator CS4 on a second computer (laptop). It does not recognize the number, saying: it is not valid. Any suggestions on how to have the serial number recognized would be appreciated.

  Please see: error of incorrect serial number

  I hope this helps.

  Concerning

  Megha Rawat

• Error - "one of the usb devices attached to this computer has malfunctioned and windows does not recognize it

  Original title: USB device not recognized / dysfunction

  "Unrecognized USB device".
  One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. Help for this problem, click this message. »

  This is what I get AFTER that I had to reinstall windows XP because a virus has attacked my computer a little before avg and Microsoft security essentials picked it up and destroyed... I have reinstalled twice... then I changed discs since I have two... well, I get this message from my 2 external Seagate Freeagent and my Phillips mp3 go gear aria... player these devices work on the laptop from my friend and she is under vista. It seems that since then they have worked on my computer before they would always run. My mouse and my cam work fine and my Canon printer gets thus detected... a few readers who have the space that is made... Ive looked everywhere for a solution... even upgraded windows media 11 and is player went to service pack 3. restarted several times... tried dPower Management tab and tried to

  Open recognition of the USB device by using Device Manager.

  .. I am at a loss: P please help thanks!

  isable the power management of the USB hub and I couldn't find the

  Hi LadyDefi,

  You can try to uninstall and reinstall the USB controllers and check:

  To remove and reinstall all USB controllers, follow these steps:

  a. Click Start, click Run, type sysdm.cpl in the Open box and then click OK.

  b. click on the Hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device and test to make sure that the problem is solved

  For more information, see the following article:

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.

• HP pavilion dv2000 key board does not

  Hai

  HP pavilion dv2000 key board does not. I have activated the key online Board that also does not work. because my hp utility cd has been damaged, I changed my OS to windows 7 key board ultimate .the rest is notworking .then I used a USB key Board that works also do not. main problem is that I couldn't filled my Os Installation with to enter the pc name. Plese help me. the original OS was Vista.

  with our thanks

  Joseph

  Hello @pxj,

  I understand that your laptop keyboard does not work, and that your alternative keyboard does not work as well. I'd be happy to help you in this case!

  As your drivers available of the system does not contain the keyboard for Windows 7 drivers, I recommend you to get a drive recovery to re - install Windows Vista on your system. This can be done by following this document on getting a HP recovery disks or USB HP recovery disc.

  Please re-post with the results of your troubleshooting, and I look forward to your response!
  
  Concerning

• need windows 7-64 bit drivers for computer pavilion laptop 17-e004ed

  Installed Windows 7 / 64 bit computer pavilion laptop 17-e004ed. Need windows 7 / 64-bit drivers for hardware parts. Any suggestions?

  Thank you.

  Hello:

  You should be able to use all the W7 x 64 drivers and software for this model.

  Your model uses the Intel HD graphics driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & DLC = in & docname = c04104419 & LC = on & os = 4063 & Product = 6622225 & sw_lang = & #n262

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK