computer started to randomly restart. What to do with the tools I have to try to find what is wrong?

Similar Questions

• Whenever I started my PC a window pop up with the massege to allow execution of "WDBtnMgr.exePublisher".

  Every time I started my PC a window pop up with the massege allow execution of "WDBtnMgr.exePublisher"... allow or cancell are option 2 for a year I have to work and I just press Cancel I didn't see any restraint on the performance of the PC.

  Hello

  ·         What operating system is installed on the computer?

  ·         Did you make any changes before the show?

  Follow the methods and check them off below if it helps:

  Step 1: Start in safe mode and check if the problem persists:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  If the problem does not persist in safe mode, then I suggest you put the computer in a clean boot and check if that helps:

  http://support.Microsoft.com/kb/929135

  Note: Reset the computer to start as usual by following step 7 from the link above.

  Step 3:

  Run the Microsoft safety scanner to make sure that the computer is free from virus infection:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• Problem of the printer, I get "the computer is unable to establish two-way communication with the device.

  Original title: printer problem

  "The computer is unable to establish two-way communication with the device. I have pluged a all cables and pluged in that they return.

  Hello
   
  1. What is the brand of your printer?
  2. when the question is is produced?
  3. you remember to make changes to your computer before the problem?
  4. when exactly you get this error?
   
  I would temporarily disable all security software and check if the problem persists.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  If you have an HP printer, you can consult the links below.
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c01868684&product=3737195
   
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=&cc=us&DocName=c00301806&product=407677
  
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• First cc 2014 crash with the message "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I've updated for Premiere Pro CC 2014, all other Adobe CC 2014 software works very well, but the first does not load again. The start page (frame) happens - my computer everything slows down and after a minute or two, it freezes completely and comes up with the message: "Adobe Premiere Pro could not find capable video game modules. Please update your video display drivers and start over. »

  I use a macbook Pro 15 '' (2014) with 16 GB of RAM and 760 GB SSDS. "

  Help, please!

  Hi Brigitte,.

  Go to the following location and rename the folder in the name of old_folder

  User/user/library/Application Support and rename the Adobe folder

  User/Library/Preferences and rename the Adobe folder

  Then, go to the folder Documents and go to Adobe/Premiere pro/8.0 and rename the 8.0 folder

  Make sure that you are in the library of the user if you are not sure to check out the link below.

  Access the hidden user library files. Mac OS 10.7 and later versions

  Kind regards

  Vinay

• I just bought adobe photoshop cc and can not find the patch of the tool, I have a Mac. What should I do?

  I just bought adobe photoshop cc and can not find the patch of the tool, I have a Mac. What should I do?

  It's here. Click and hold to view the nested tools

  

• Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool liquify (photoshop cc 2015): what should I do?

  Brush control with CTRL + ALT + click right + mouse/pen movement does not work with the tool of liquefy; I can't change the size of the brush or hardness. OS win 7 Professional 64 bit, wacom tablet intuos 6.3.14 - 1 driver s pro, Photoshop 2015 CC worm.  2015.0.1 20150722.r.168

  What are your settings of GPU acceleration?  As I understand it, the Alt right click size and hardness adjust needs acceleration GPU to be turned on, but I have a feeling Brush hardness is always set to easy when using fluidity.  You can still see the quick mask as representation of the soft brush when Alt right click, but you can't change the hardness.

  Is that you can change the brush size and pressure (framed in red in my screenshot) Alt right click drag left and right changes size and down to pressure changes, and you can see what is happening in real-time by looking at the sign on the right.  It works independently of your acceleration GPU (IME) settings, but you don't get the effect of soft red quick mask.

  

  Does this fit with what you see, or you are not able to change things at all?  If not, then I've always found that fluidity consumes system resources, if you could check the Task Manager > Performance tab to see what kind of RAM and CPU use is using the fluidity.  That's what I see after direction the lens above with a big brush continuously for 10 seconds.  Note This is on a fairly quick NLE System.

  

• I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Anyway is to align the document even if it requires me to crop or lose

  I have Acrobat Pro on my computer and I work with the drawing that have been digitized in PDF format. The scanners are not aligned or place because of the poor scanning process. Is there anyway to align the document even if it requires me to crop or lose some on the edges?

  Hi brad.

  Yes. You can use the analysis tools to straighten and crop your document. Here is a link to a new tutorial. The key to activate the sliding options recovery is to choose the option of the camera Image in the drop to Enhance, and gives you tools to set the correct page for smoothing areas.

  fundamental https://helpx.adobe.com/Acrobat/How-to/scan-Paper-documents-Searchable-PDF.html?Set=Acroba--principes t - create a pdf file

  Donna.

• Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Hello I am a student and I have a problem with the tool Selection (V). When I opened the file AI CC with CS6 selection tool doesn't allow me to change the selection. What can I do? (I have reinstall AI CC and the problem persists)

  Ivan,

  If it's on the rectangular objects, you may have encountered the bug Rectangle Live which is limited to the MAC versions from 10.7 and 10.8, but not of 10.9 (Mavericks) or 10.10 (Yosemite). If all goes well, the bug will be fixed soon.

  Thus, a switch for the Mavericks or Yosemite with a reinstall might be the way to solve it here and now.

  To get around it, in each case, it is possible to develop direct Rectangles to get the normal old shaped rectangles or Pathfinder > unit, or use the scale tool or the free transform tool.

  A more permanent way round that is to create normal old shaped rectangles, after running the free script created by Pawel, see this thread with download link:

  https://forums.Adobe.com/thread/1587587

• Service Pack3 after install that my computor does not start it keeps restarting after it arrives on the screen of the window

  I remove SP3 it works very well to reinstalled sp 3 and had the same problem

  I remove SP3 it works very well to reinstalled sp 3 and had the same problem

  IF the system has an AMD processor, see this:

  Your AMD computer starts after installation of XP SP3?

  Download and run the tool that is located in the "first problem, affecting computers AMD with OEM images, mainly desktop HP"section. "

  MowGreen Services consumer safety update

• random freeze... associated with the disorder of wmi?

  Hi, I have a win 7 Home premium system random freezes where just stopt and I have to restart.

  This happens usually about an hour after the start when my computer's bit (music player and browser open) then the music stops and last time image remains visible (not when my screen turned black before this time)

  After you disable most of the hardware and software this problem persists, sometimes twice a day, sometimes not for a day.

  Since no newspapers give nothing other than "the last stop was unexpected," I started to dig into some failures of wmi.

  anyone has a suggestion if it could be related to my freeze and I have to rebuild?

  Please read this wiki to know how to find and download your Event Viewer logs

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 
  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Computer unable to detect USB devices. Problem with the PnP device

  Hey,.

  When I use any usb device in my computer it didn't show. When I troubleshoting the messege see the problam pnp device. kindly advice me how to solve this problam in my system.

  Thank you.

  Original title: pnp device problam

  Hello Usman,

  Thanks for posting your query in Microsoft Community Forum.

  1. It was working fine before? If Yes, you did it any significant hardware or change software on the computer before this problem?
  2. What is the exact error message you get, when you say, 'messege see device pnp problam?

  I understand that you can not use your USB devices because your system does not detect them. To resolve this problem, I would suggest trying the following methods and check if the number is reproduced.

  Method 1: Try running the Fixit tool from the link below.

  Hardware devices do not work or are not detected in Windows:
  http://support.Microsoft.com/GP/hardware_device_problems

  Also, run the next fixit to solve common problems with USB devices.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the removable USB device and test to make sure that the problem is solved.

  More information: http://Windows.Microsoft.com/en-US/Windows7/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Computer hangs on a white screen on startup with the keyboard is plugged.

  Original title: I have a problem starting

  I have a problem when I start my pc with my internet stick plugged and it hangs on a white screen. I have to get the key out and close my pc and reboot to get to the screen to login manually.

  This also happens randomly - some days it just starts with the key and the other days he dislikes the key and goes to blank screen.

  Why is this randomly - this is my question? If the settings are the same so why did happen randomly instead of blocking me or just start every time? Why is it random?

  Equipped with Vista

  Hi donga65,

  • To go through the other advice?

  Try Method 1 to downstairs, go to the method 2 If this does not resolve the issue.

  Method 1: You can update the drivers for the computer to check the issue. Log on to the manufacturer's Web site and install all the device driver updates including the chipset. See if it helps.

  Method 2: Make sure that the BIOS (Basic Input\Output System) is not altered. Check the boot sequence and make sure that the hard drive is the first boot device. Check with the manufacturer for more details.

  Important: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this helps.

• I am trying to set up my computer, so I can send emails and letters with the Microsoft speech recognition

  Salvation in Ottawa Canada.  I am using the above in my laptop.  I was given Microsoft LifeChat LX-3000 running Micro cover and the disc that comes with it.  Disk would not properly charge during installation.  I went to the Microsoft website and tried to download this product, and I got the same results.  Sometimes I plug my head game, and it works for a long time.

  
  I am trying to set up my computer, so I can send emails, write letters nothing complicated.  I use speech RECOGNITION Microsoft,.
  instructions.  My first questions.  Do you actually have a program, in order to activate speech recognition?
  
  I'd appreciate any help, advice, etc.
  
  I approach the age where, I rely on my computer help at times and I really like the lap top.
  
  Bryan W. Fuller
  * original title - Microsoft Speech recognition - 9 windows - Vista home premium *.

  Hi Bryan,.

   
  You can use your voice to control your computer. You can say commands that the computer responds to, and you can dictate text to your computer. Before you start using Windows speech recognition, you must have a microphone attached to your computer.
   
  I suggest you to see the links and check if it helps.
  
   
  Set up speech recognition
   
  Common commands in speech recognition
   
  Setting speech options
   
  Train your computer to recognize your speech
   
  Use speech recognition to operate windows and programs
   
  Dictate text using speech recognition

• What is the problem with the tool crop of Photoshop CS6? (photo included)

  Since I upgraded to Photoshop CS6 and started to use the new crop tool, I get this very interesting visual error and some artifacts.

  I have the problem with the crop tool in previous versions of Photoshop.

  What can be the problem?

  

  Looks like a GPU problem. You can try to go in Photoshop preferences, disable the GPU acceleration and try if that fix it?

• Can I upgrade my computer Windows Vista 32 bit to 64 bit with the specs of my computer?

  Here's a question. I want to upgrade my pc to a 32-bit - 64-bit, 120-750 hdd hard drive and the RAM to 4gbs. is it possible for a 32-bit processor, 512 MB RAM oringally vista home 120hdd?

  original title: everything just curious...

  Hello

  Check with your system manufacturer (manufacturer of motherboard for custom systems) to see if your computer
  can run Windows 7. If so check to see if it can run 64-bit which has higher minimum
  requirements than 32-bit. Finally check to see if the hardware upgrades that you make will be
  work in this computer. Don't forget if you spend a lot of money on upgrades, you may have
  but could a new computer for the same price. And then you'd have two systems.

  Windows 7 system requirements
  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  32-bit and 64-bit Windows: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  64-bit support
  http://www.Microsoft.com/Windows/Windows-7/features/64-bit-support.aspx

  Run the Upgrade Advisor, and check with the center of compatibility for your key features. Also
  some system manufacturers have the online help and information for the upgrade to Windows 7.

  Windows 7 Upgrade Advisor - run this http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  To see if you can run XP, Vista, or Windows 7 64-BIT, you will need to check with the system
  manufacturer if it is 64-bit capable. Are there drivers 64-bit for all devices? To run 64-bit you
  need 64-bit drivers (and the system must be able to run this version of Windows 64-bit).

  I hope this helps and happy holidays!

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">