Computer takes a long time to turn on

Similar Questions

• desktop computer takes a long time to load after uninstall of netware

  Dear Pascal, recently, by chance, I installed the client service for Netware on my PC. He asked to restart the computer, and after reboot, logon screens became classic. I uninstalled netware by accessing the properties of LAN. I managed to restore logon screens using Microsoft resources available on the net. However, my PC now takes * for long time for the desktop icons and toolbar are displayed. I use Microsoft Windows XP Version 2002 SP3, Intel Core2Duo processor P8600 @2.40 Ghz with 2 GB of RAM on Lenovo Thinkpad R400. I understand that it is after uninstalling the netware client that my office is very very slow. Help me for a faster loading of the desktop computer. Best regards, Reba Shankar

  Hey Reba,

  Thanks for choosing Microsoft Community!

  You have reached the right forum. Try to solve this problem.

  If I understand correctly, you have some performance issues on windows XP computer.

   

  Let us try the following steps:

   

  Method 1: Any installed program must be uninstalled from Add and remove programs. You can just remove shortcuts from other places like LAN properties.

  Run the following fix - it to uninstall client services for Netware.

  Solve problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/program_install_and_uninstall

   

  Method 2: See the following article:

   

  How to make a computer faster: 6 ways to speed up your PC:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx#fBid=uQRRD6ZPxkC

   

  Important notes:

  ·         Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope the helps of information. Don't answer if you need assistance, we will be happy to help you.

• Windows XP SP3 computer takes a long time to start and stop

  original title: where to get support for Win XPsp3?

  computer takes long to START and CLOSURE and the search can't find anything

  Try to carry out the instructions in the link below firstly to improve the speed and performance of your computer:

  http://www.Microsoft.com/windowsxp/using/Setup/expert/northrup_restoreperf.mspx

  In addition, you can get technical support for Windows XP by using the link below. In the link provided, simply select the appropriate version of Windows XP you are using. You have the ability to chat, e-mail or telephone.

  http://support.Microsoft.com/select/default.aspx?target=assistance&C1=509&

  You can also get in touch with them by calling the 800-936-5700. Their opening hours are from Monday to Friday from 05:00 - 21:00 and Saturday-Sunday 06:00 - 15:00 Pacific time.

• My computer takes a long time to start

  MY COMPUTER STARTS VERY SLOWLY UPWARDS... WHEN I START BY PUTTING AND EVEN AFTER I PUT THE UNLOCK PASSWORD IN AND I MEAN VERY SLOW AND YES I RUN A PERFORMANCE CHECK AND ALL OTHER THAT GOES ALONG WITH THIS PROBLUM AND THEY ALL COME BACK AS NO PROBLEM YHANK TE

  Hello wandaschulter,

  How long have you had this problem with regard to a slow start at the top?  Did you change to your system before you live it, hardware/software or Windows updates?   I could log into your sytstem in a clean boot state and see if you can eliminate any third party software that might be the cause.

  Clean boot:

  http://support.Microsoft.com/kb/929135

  Have you run an analysis complete with your antivirus software or other malware/spyware removal software?

  How to remove malware

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

  You can also check what load programs when you turn on your computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/removing-startup-programs-in-Windows-7/c2ff3fd1-3E32-46d9-9522-ec05034a2db1

• How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish?

  My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?

  All the solutions for this?

  Original title: Windows Vista systems

  Hello

  This can help you:

  "Enable or disable the screen saver.

  http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista

  And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):

  http://www.Vistax64.com/tutorials/85539-screen-saver.html

  "How to disable or enable Protection by password on Wake Up in Vista"

  http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html

  See you soon.

• My computer may take a long time to stop.

  * Original title: Shut down

  My computer off button does not work correctly. My computer may take a long time to stop.

  Do not press the power button to turn off the computer or to solve a gel. Click on the ORB at the bottom left of the desktop and click stop. If you are having shutdown problems, then select the hotkey Ctrl + Shift + Esc to bring up the Task Manager and click the Applications place the cursor on a running application to select and click on the end task button. As the application is removed from the list, repeat the procedure on the next application in the list until all are gone from the list. If you use the taskbar to access programs simply close all open windows. Then, you should be able to shut down your computer.

  http://Windows.Microsoft.com/en-in/Windows7/turning-off-your-computer-properly

• My computer is very slow and takes a long time to connect and disconnect

  Original title: sign out of questions

  My computer is very slow and takes a long time to connect and disconnect. Sometimes I hit Logoff button and do not forget I have more work to do... is it possible to cancel the newspaper once it starts, or should I just wait what he log out completely and then reconnect? (It takes just forever)

  Install the background file. See if it suits it

• Turn on FT takes a long time

  Hi, a few two farms VMware configured exactly the same thing in different datacentres. In a domain controller when switch on FT a message regarding the FT will use a memory full reservation... and after you click Yes after a short time FT starts to work.

  In the other DC, when turn on FT a message if poster regarding the FT will turn thin impression thickness discs, as well as the FT will use a memory full reservation... and after you click Yes, pi takes a long time to set up and failed. For example, currently onlt 40% complete and has been configuing for 2 hours. Also note that the disc is certainly not thin and drop thick so I do not know why this message is received.

  Does anyone know why FT can take so long to implement?

  Disk must be a special type of thickness: EagerZeroed thick

  Conversion (on the first time) take a long time.

  See: http://communities.vmware.com/docs/DOC-10854

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• Programs to freeze or take a long time to respond

  When I run new programs that they can take a long time to start or they freeze. This happens sporadically, but enough to be a nusiance. I followed all the steps listed under the section "fixit" of Vista Hoem premium and the maintence of the Vista Help sections section: I've defragmented, wipe the drive, run the system performance (overall score of 5.4 due to memory all other 5.9), has increased to 8000 MB swap file and several other steps. If I try to click on the program, while the little circle turns, my screen becomes a pale white and I can't do anythingfor several minutes

  Has anyone else had this problem and solved? I have a lot of space (free 400 G) and 4G of RAM.

  This happens anytime, not only after the machine has been for some time, given the previous answers to this question.

  Daniel Dixon III

  Hi Daniel,.

  What application are you trying to access?

  You can perform the clean boot, and then check if the problem persists. It will start Windows Vista by using a minimal set of drivers and startup programs and helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Reference:optimize Windows Vista for better performance

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox takes a long time to close since a recent update and memory of pigs.

  Since the recent updates that have begun to use containers of plugin, Firefox takes a long time to close. If I try to go back there, he said that it is still running. I have liik in the Manager of tasks and about seven containers plugin. exe is running, and I turned off or disabled mostplugins and addons, same Quicktime. Firefox uses an obscene amount of RAM on my XP machine and rendered sluggish. I use XP SP3. This started after you added the plugin container in one of the recent updates earlier in the year. For the features it offers me or does not offer me, instead, it uses far too much RAM and is too slow. And takes a long time to close when I close the browser. It uses about twice as much RAM as it was.

  Upgrade your Firefox 9 browser and check

  • getfirefox.com

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Visual Studio 2008 Pro takes a long time to start after the installation of measurement Studio 2009

  After installing Measurement Studio 2009, I noticed that it takes a long time (30-60 seconds) to open a Visual Studio project.

  I do not have an internet connection on my development computer and suspect he might be waiting on some kind of operation of the network to time out.  I had problems with Visual Studio in the past as well and had to work around them by adding entries to my hosts file (to redirect some addresses of Microsoft to the local IP address - this causes network operations to expire immediately).

  Just curious if anyone has encountered this kind of slow startup time and found a solution.

  Thank you!

  I found an article referring to a question similar to MS 8.1.  I don't know if the problem has simply not been corrected or why I am still having this problem.  Workaround "per computer" listed in the article solved my problem.

  http://digital.NI.com/public.nsf/allkb/18E25101F0839C6286256F960061B282 I have

• videos take a long time to buffer

  There are a few dat I could watch fine Inc. and now it will take a long time for the buffer viedo and still have problems

  Hello

  1. what operating system is installed on the computer?

  2. what version of web browser work?

  3. do the same thing happens with all the videos that you try to play?

  4. I think you are referring to the videos online?

  5. How do you try to play the video?

  If you use Internet Explorer and facing problems, watch videos online, then you can check out the link below:

  The video problems when you use Internet Explorer

  http://support.Microsoft.com/kb/2532294

  Note:

  There is no option within the operating system to increase the speed of buffering. Only way to increase the speed of buffering in some measure is to have a connection with a higher bandwidth. But note that as does you not an option of continuous play in CD or DVD.

  Another work around that I do personally is to pause the video to complete the buffering and watch the video once the buffering completed.

  I hope this helps!

• Transfer of photos to send takes a long time

  Problems uploading photos?

  Whenever I try to upload photos to send to people, it takes forever to download.  As it will take 5 minutes to upload a few pictures.  Never had this problem before when using Windows, but now I have new computer Windows Vista, and it takes a long time.  Do you have any idea how to solve this problem.  Thanks for your time

  ..... Have never had this problem before when using Windows, but now I have new Windows Vista computer and it takes a lot of time.

  1. only speculation. You compare a XP with Vista.

  2. regarding why it took so long:
  Same reason why it would take more time to download an e-mail message that has a LARGE attachment size.
  Your total size of the file of a "pictures" could be actually large.
  You can resize the photos before clicking on join. It can help.

  t-4-2