Computer to give cleanup!

Similar Questions

• Claire on an old computer to give

  I want to erase an old computer to give to a friend. But I want to keep Microsoft Office is installed on your old computer.

  You must do a clean install of Windows/restore to factory state before giving the computer away and that will solve the problem of MS Office. Make sure you only give the friend (e) CD/recovery of Windows XP installation disks. MS - MVP - Elephant Boy computers - don't panic!

• Best way to clean a computer to give to a family member.

  I want to restore my computer Windows XP Dell to its factory settings in order to give to my parents. I'm not not as much concerned about safety with my old files that I'm computer being simplified and works well, because there was a lot of modules downloaded over the years and it works more smoothly. What is the best way to get rid of all the waste accumulated on my hardrive over the years? I'm still all disks that Dell has provided at time of purchase. I'm not sure if it's better to try to try to clean it, or start from scratch.

  Windows XP Service Pack 3

  Dell Dimension

  Thank you all for your advice. For the record, my size is a 2400, and I have the original full version of XP with Service Pack 1a.

  After trying to solve this problem with my knowledge limited and before all your very helpful responses, I decided to go on the road to uninstall as much as possible use Revo Uninstaller. Given that I've initially was looking for a method of time-saving security since I gave the computer a member of the family, to the point where I investigate buying a new CD player internal and all other solutions, it began to look like an option far less time. If my family member decides that always, he would like to make a fresh start but, we look at the above.

  Thank you very much for your detailed responses. I much appreciate and will refer to them if needed in the future. I'm sorry I'm not able to try them, but I was on a time crunch to get the old computer in working condition for the Member of my family and cost/time of what solutions were looking like became problematic.

  Thanks again!

• trying to connect to my citrix client, when turn on my computer it gives me an error saying "cannot find NOT. CHM with error 2: the system

  I have a Gateway laptop, I had some connection to my work site to work.  This is the Citrix program. I noticed that when I connect to my system, it gives an error code "Unable to find concentr.chm with error 2." It doesn't let me work.  I tried to uninstall the program, and he says that I am not the administrator? I'm the only person who uses my computer and I bought it new.  I tried re setting factory and it doesn't work. Help

  Hello eking2293,

  Microsoft Answers is the consumer forum based. It would be better addressed in the forum TechNet for ITPRO.

  Click on the following link to post your question on TechNet:
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Sincerely,

  Marilyn

• Try to install Windows 8 on an empty Asus 32 bit laptop computer but gives error: 0xc0000017

  So I have a laptop Asus 32 bit empty with no system on it and nor anything on the hard drive. Well, I tried to install Windows 8 on a DVD on the subject. Then I go to the "context menu" and start the dvd/cd player and it loads normally until it gives this error:

  'RECOVERY '

  Your PC needs to be repaired

  "Your operating system could not be loaded because the critical system driver is missing or contains errors.

  File:/Windows/system32/drivers/Tcpip.sys

  Error: 0xc0000017

  You will need to use tools of recovery on your installation media. If you do not have any media (such as a disc or USB device) please contact your system administrator or the computer manufacturer. »

  So what he says and I already tried to install other Windows operating systems, but it gives the same error or it does not read the dvd disc at all!

  Any help? Thanks :)

  Hello Darnell,

  • Which type of installation (upgrade, custom or Clean) you want to make?

  Tcpip.sys is a SYS file type associated with April 2011 security release ISO Image developed by Microsoft for the Windows operating system. The latest known version of Tcpip.sys is 1.0.0.0, which was produced for Windows.

  SYS file errors are usually caused by a faulty hardware or damaged device driver files. Because of the importance of Tcpip.sys in April 2011 release ISO Image and other Windows security feature works, corruption or damage to this file can create criticism of the system errors in the form of a "blue screen of death" (BSOD). Please see "Causes errors of Tcpip.sys" below for more information.

  The majority of the tcpip.sys errors that you encounter will be mistakes of 'blue screen of death' (also known as a "BSOD" or "STOP error")

  Since there is nothing on the disk, you can try to create the installation media and create a USB bootable flash drive. Then try to clean install of Windows 8.

  If this does not work also, you can contact the manufacturer of the computer.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• While trying to look for something on my computer, it gives a blank screen and then start back on the desktop

  I use a laptop HP H250 running Windows 8.0. Since yesterday whenever I search something on the machine it gives a blank screen and then start back on the desktop. An analysis of the system and the registry has verified. Can anyone help?

  Hi Courtney,

  This issue may have caused due to some missing or corrupted files in the computer. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. are you referring to the Virus scan by "system scan"?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the troubleshooter of System Maintenance and check if it helps. This troubleshooting will help you find and fix common system issues on your computer.

  Follow the steps to run the Troubleshooter:

  (a) press Windows + Q together get the search option.
  (b) the type of Troubleshooting on the search option, and then select Troubleshooting.
  (c) click show all on the left side panel.
  (d) click on The Maintenance of the system and follow the instructions to run the troubleshooter.

  Method 2:

  Put the computer in a clean boot state, and check if the problem persists. This process will help you determine which third party/PPP program is causing this problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 or Windows 8 / 8.1:
  http://support.Microsoft.com/kb/929135 
  Note: After the boot minimum troubleshooting step, see the "How to reset the computer to start as usual after a clean boot troubleshooting" section in the link provided to return the computer to a Normal startup mode.

  Please reply with the status of the issue so that we can better help you.

• I put a synchronization and copied from bookmarks to another computer I give to my grandson. I deleted several bookmarks that were meaningless to him. I didn't turn off sync on my computer and now have lost most of my favorites. I can get these?

  Recover lost bookmarks after synchronizing to another computer

  Try to restore the bookmarks from the most recent backup of JSON in the bookmarkbackups folder that has them.

  • Bookmarks > show all bookmarks > import and backup > restore > choose file
  • https://support.Mozilla.org/KB/backing-up-restoring-bookmarks
  • http://KB.mozillazine.org/Lost_bookmarks

• Stops on his own computer and gives me a flashing orange power light when I try to turn it on

  It lights up then, but I am at a loss and don't know what to do

  Hello, Crystal,

  Brand and model of the computer, please.  Ex: HP Pavilion XYZ324

  If a Dell - problem with power supply causes flashing orange light

  (1) unplug the computer from the taking of surge protector or wall.  Leave that it unplugged for two minutes.  Reconnect the and restart.

  (2) ' ' ' ' shutdown computer. "" " If connected to an external modem, cut the modem and unplug the cables that plug into the modem.  Wait two minutes.  Plug the cables back in and try to turn on the computer.

  (3) disconnect the devices such as printer and try again bootingup, digital camera, try again starting, speakers, new start up attempt... etc...

  4)

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• New Dell computer, which gives the message "Cannot connect to Delldock" in Vista

  whenever I log on a popup says unable to connect to the dell docking station.  This a new computor for me and I do not know how to find the dell dock

  "This a new computor": Windows 7?

  http://support.Dell.com/

  Dell support at the link above.

  Did you ask the subject:

  http://www.DellDock.com/

  If it is above > look in the start menu > programs > software Dell > Dell Dock > or re-download.

  If another brand computer > look in their software > under start > programs.

  See you soon.

  Mick Murphy - Microsoft partner

• Turn on computer laptop give - HDD error 301

  Hey,.

  It was the last point of control for me with my problem.

  First of all, I want to say what is my problem:

  I'm every time hard drive 301 error when I open my computer. I will get error has occurred on the hard drive using windows.

  I checked for samsunghdd.com and there was some application called seatoolsDOS, just cannot run it because I can't access Option ahead of start. I asked what to do and meet a forum was the drive is dying and Im agreeing that too now.

  Well, my HARD drive is: Samsung 500 GB HM500JJ

  Windows 7 Home Premium operating system

  Laptop model: HP DV6 3050so

  Problem: disk 301

  IM wondering how long my hard drive can run? I have nothing to back up. I just want you get a resolution to this.

  If you want to know more just ask. I don't know I missed something so just ask

  Cordially Mika Marjomaa

  Hello

  This will not affect any other part of your unit. Just buy the same kind of car should work for you well.

• Lightroom does not recognize the external hard drive used with your old computer.  gives it a new drive letter.  How can I do understand that it is the same as that?

  Bought a new computer.  Lightroom cannot find the photos that have been saved on external hard drive because lightroom gave a different drive letter.  How (H) instead of (E).  How can I merge them without doing a full import?

  In Windows, you can change the drive letter e (Besides, isn't Lightroom, in doing so, is Windows)

  Change, add, or remove a drive letter - Windows help

• "When I start my computer it gives me a message that windowsroot > \system32\hal.dll" what download I can solve this lack?

  He rises before starting Windows then I have to hit enter and it goes to Windows

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/is-there-any-way-possible-to-retrieve-my-data-from/712335d4-d91b-47e5-B178-4f9f87b836f0

  Try this answer and it can help you.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-could-not-start-because-the-following-file/2bb8607d-aa8b-42b3-b80e-23e323d4e370

  and this is another one with the same problem.

• Photosmart B110a: Photosmart B110a - "analysis of the computer" gives an error

  Because of this problem, I just reinstalled;

  HP Photosmart full feature software and drivers on 3 August 2015 14.8.0

  (PS_AIO_07_B110_USW_Full_Win_WW_140_408 - 5.exe)

  The installation went well and the software easily found the printer on my wireless network.

  I can print without problem.

  However,.

  If I go to the printer (on the touch screen), select "Scan" and then "Scan to computer" it gives an error.

  Now, I have discovered first - through the HP solutions Center - I have to 'Add' types of scanning options for the "Scan to computer" - menu of the printer.

  So I added "Document in PDF format" to the touch menu screen of the printer.

  (I still have HP Solution Center running, in which case it must be somehow 'catch' the files analyzed, sent by the printer)

  However, the printer still won't scan anything (instignated of the printer)

  (I already rebooted the printer, my computer, and even my router)

  Another problem is that the printer keeps forgetting the types of scanning options that I added to its menu.

  UPDATE:
  I've updated that the firmware of the printer still does not work

  UPDATE:
  I uninstalled from the computer restarted the computer everything HP and installed the full software from HP again.

  Still does not work...

  Hahaha,

  I have to anticipate this.

  Here again Support HP with their standard super tips ' uninstall... install again.

  If you read my post, you could see I'm already dealing with the latest version of the software and it works on a fresh windows install ultra 10.

  But never mind HP support.

  I understood the effing problem myself.

  I installed the latest version of the software on a netbook which has windows 10 on it, and 'scan as' works.

  On this netbook, I noticed that every time you start, there is a little program called HP Digital Imaging Monitor.

  THIS program has no boot on my desktop, the source of the problems.

  Solution:

  Start the Task Manager, select the tab start and Select HP Digital Imaging Monitor.

  Please HP, test your software before discharging it in the market.

  Thus, on an edition 64-bit of Windows Enterprise 10, HP Digital Imaging Monitor somehow can prepare you to 'disabled' in the windows startup program list.

• Computer not saying limited connectivity or none

  Hi guys.

  I have a HP Compact S5200UK Tower I just rebuilt as it is need to be introduced to a network of peer-to-peer of 6 computers at work.
  I have loaded Windows XP on this unit and now want to update your computer via windows update in preparation for this.

  After going on the HP site, I found the original drivers and installed what I thought to be the correct network driver "NVidia nForce MCP Neworking Controller". Now I find that I can't go on the internet and I get the message "this computer is limited or no connectivity that can affect your connection to other computers on the network or with the possibility to get on the net.

  The computer doesn't seem to be able to generate a correct IP address and appears to be a number 162, which is a random temp number when your computer cannot connect to the DHCP host. I tried to ping other computers and I can't. I ping my network card and got a response that indicates that it's ok and I also checked in the Device Manager and there seems not to be any problems.

  I was also on the phone to ISP for the many hours all to nothing does not because there is not a problem with their link I have a laptop via wireless connection which also works fine when I plug the Ethernet. Now run out of ideas?

  DBow

  Hello

  Don t get me wrong, but I you must contact the manufacture of your computer. Here he s a Toshiba user forum, where people can share there experience on all Toshiba laptops and help other users.

  So it of in the wrong place here, for your question. Maybe you can find a similar forum from the manufacturing of the computer or give them a call. They should give you more detailed assistance.

  Good luck! :)