Computer tries to install the update, then turned off and restarts on & on
I was checking e-mail. Vista froze. I turned it off, waited a minute and he turned his back. The display shows "Installing Update 3/3. 0% complete "(ou quelque chose comme ça)." After a moment he said "shuttting down", then restarts on the same screen and stops again, etc.
I tried a beginning of safe mode, safe mode with network, known last good configuration and nothing makes this update screen go away.
To the best of my knowledge, I have NOT interrupted updates at any time.
Do NOT post more than one question about the same problem in these Forums!
One problem = a post is a single Forum. http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/cf8bb310-4FF5-4ee4-9368-f1b6cb6239c0
Answered in another Thread.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
How can I solve this system start? Have you tried the F10 and F2 keys but to no avail.
Hi Wiild,
Follow these steps.
Press f8 before the Windows screen. Here, you will have a few options. You want to select the option that States disable reboot on system failure. This will allow an error code appears when the computer will restart. Let us know what is this error code.
I hope this helps! Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Visa update problem
After trying to install the updates. my computer is now stuck in constant reboot mode while showing "Configuring updates 3 of 3 0%, do not turn off your computer. I tried to follow the instructions provided here because it seemed to be the same problem. But when I restart and hold down the F8 key so I can boot into safe mode, I tried selecting safe mode and I get the same results, and I tried again by selecting the option 'Disable automatic reboot' which seems to be an option on the same page with the option of safe mode. Whatever it is, the same message comes back and I can never get to where I can see my desktop to click 'start '. I can't get out of this cycle. I installed the update because it said I needed to install it.
*************************************************************************************************************************************************
Turn off your computer by holding the power button for about 20 seconds.Start your computer in safe mode: press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appearsDisable the automatic restart in the event of system failure:- Click Start
- Click on Control Panel
- Click on system and Maintenance link.
- Click on the system link
- In the left pane, click Advanced system settings
- Locate the startup and recovery area, click the settings button.
- In the startup and recovery window, uncheck the box next to automatically restart.
- Click OK in the startup and recovery window
- Click OK in the System Properties window
- Close the system window
After that... While STAYING in safe mode I do a system restore and maybe try a manual install of the update later.For the sake of space I refer you to the article about how to proceed.System restore
http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspxWindows updates: http://windowshelp.microsoft.com/Windows/en-US/Help/8f259118-0d61-4c7a-8c56-24987e87a8171033.mspxPlease let us know if this solution works for youTheresa
Microsoft Answers Support EngineerHello
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
Ideas:
- You have problems with programs
- I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!
Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:
5 steps to help protect your new computer before going online
http://www.Microsoft.com/protect/computer/advanced/XPPC.mspxOther useful references include:
Measures to help prevent spyware
http://www.Microsoft.com/security/spyware/prevent.aspxMeasures to help prevent computer worms
http://www.Microsoft.com/security/worms/prevent.aspxAvoid fake security software!
http://www.Microsoft.com/security/antivirus/rogue.aspx~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
my computer will not install the update of security for Windows XP (KB2481109)
Moderator before go Note: IE8.
-----my computer will not install the update of security for Windows XP (KB2481109) can you help me.
Hello
(a) don't you try to install the update manually?
(b) you get any error message?
(c) don't you make changes to the computer until the problem occurred?
(d) what anti-virus software is installed on your computer?
I suggest you try the steps below and check if it helps
Method 1:
If you have installed a security software on the computer, then I suggest you to temporarily disable a software antivirus installed on the computer and check if the same problem occurs
Note: Please make sure that you activate the software of Antivirus\Firewall after the test to keep your computer protected.
Method 2:
I would say as you try to perform the clean boot and then try to install the update and check if it helps, here is the link:
http://support.Microsoft.com/kb/310353
Make sure that return you the computer to a normal startup mode once it's done.
Additional information: make reference in the link below:
http://support.Microsoft.com/kb/2481109
Hope this information is useful.
-
Error in Visual C++ when trying to install the updates to Turbo Lister
When I try to install the updates required for eBay Turbo Lister I get an error that says: "upgrade to Turbo Lister did not complete because has no Microsoft Visual C++ 2008 redistributable installation program. Please log in with Admin privleges. "As far as I know, I am the Admin I bought new computer and no one has ever used it. Do I need to install Microsoft Visual C++?
Hello
1. what version of Windows are you using?
2. have you tried to install the update for Microsoft Visual C++?
I suggest to install Microsoft Visual C++ update and check the issue.
You can download the update from Microsoft Visual C++ from Microsoft Download Center and install the same in offline mode.
Microsoft Download Center: http://www.microsoft.com/download/en/details.aspx?id=5582
-
I tried to install the update of security KB2431831 for Microsoft Works 9 several times. Whenever he fails and give me "Update error code 646 Windows has encountered an unknown error.
See this response archived from a previous thread:
http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/21092c30-da71-4b7c-B242-1b32b28242bc >
-
I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).
I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.
Ran the update without any firewall or AV program running and still received the same error.
AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.
Hi a93svtf,
This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.
Step 1: Run the fixit available in the article below
You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336
Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Now, try to install the update
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Try to install the update for creative cloud and it gets to 43% and then says error code: 50
N ° 1)
Leaving Adobe Creative Cloud application and put an end to all the Adobe Task Manager process / Activity Monitor [mac].
Step 2)
Uninstall Adobe Creative Cloud using Creative Cloud uninstaller.
https://helpx.Adobe.com/creative-cloud/help/uninstall-creative-cloud-desktop-app.html
Step 3)
Reinstall the Adobe Creative Cloud application:
Windows: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/win32/CreativeCloudSet-Up.exe
Mac: https://ccmdls.adobe.com/AdobeProducts/KCCC/1/osx10/CreativeCloudInstaller.dmg
-
I am getting error #1328 in acrobat XI while trying to install the update.
I get the #1328 error while trying to install the update to acrobat XI. The error that says that it has not applied the patch for C:\config.msi\PTFBD7.tmp I uninstalled and re-installed acrobat as the help page, told to do, but it will not yet installed the update.
Sometimes, the questions are about disabling antivirus and be logged in as an administrator. Another tactic is to download updates directly from Adobe at http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install manually.
-
I can't install the new application on my iphone 5s revel. I tried to install the update, and that did not work. I deleted my app and rebooted my phone and tried a clean install and that no longer works... Help!
Please see the post below updates on the issue of the revel facilities:
-
Original title: help - csvhost.exe and problems to start
My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop. I am able to navigate to the top after repeated attempts. I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process. It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down. It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes. The site is: http://www.exe-error-advisor.com/svchost-exe. I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"
Any ideas or advice?replied in the other thread
-
Original title: HDMI sound
I know that many have had problems, but I did not mine specifically. My HDMI connection was working fine with my laptop HP and m HD tv. I didn't use it for a while, now it is just the video, no audio on the TV. My reading shows the HDMI as a default device, but the sound is yet to come of the computer laptop, even when the volume is turned off on it. Ive read all the reviews and updates of pilot who was old. I don't know what else to do!
Hello
System Restore does not have this long period of time.
You may want to refer to the suggestions in the thread below link and check.
No sound via HDMI output portable computer connecting to TV
I hope this helps.
-
I just tried to install the Adobe Creative Cloud trail and the apps tab does not work and I tried to uninstall several times and nothing. Any suggestions?
An error keeps poping up on creative cloud without work and it's really annoying that I can't use it anymore or even try anything at all.
Help, please
Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
-
Help! I have an apple mac with windows alongside mac system. I the have not used for a while and when I logged in the windows system advised me to update to IE 9. To do this, I had to install Service Pack 2 I did. He then restarted but cannot install and came up with the following: Service Pack does not have changes to restore it then shuts off and restarts with the same message over and over again. I don't know what to do to reopen and to reinstall the Service Pack.
Hello
This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.
http://support.Microsoft.com/kb/947366
Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.
http://social.technet.Microsoft.com/forums/en/itprovistasp/threads
or repost in the Windows Update forum link below
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
Maybe you are looking for
-
View the history form is really weird
When I start typing in a box, my history of form appears, but not readable way: http://s21.postimg.org/yfp9s99cz/Screenshot_14.png?noCache=1372954964 I tried to restart Firefox with disabled modules and the problem disappeared, so I tried to disable
-
Can satellite L450-136 - I install Windows XP?
I just got a Satellite L450-136 with Windows 7 and all loaded Toshiba Utillities. I don't like Windows 7 and many prefer Windows XP.Can I remove all Windows 7 and install Windows XP on this laptop? Thank you.
-
Satellite A110-275: digital recording of cassettes
I have a Sat Pro A110-275. Nothing else added. Can someone tell me how I can use it to record tapes to a digital format? What should I buy material additionl / software? See you soon Kilfinnan
-
How image rotation and displacement by using different origins
Hello I use LabVIEW 8.5 and 8.5 of Vision. I need to rotate, scale, and move a 2D image regarding one aspect of the image. I use IMAQ turn and shift, but I don't know what is the point of reference or originally used in this function. The coordinat
-
KB981129 fails to install on OEM Windows 7 Home Premium
The description of the fix for kb981129 (http://support.microsoft.com/kb/981129) is on-site that describes the problem I have with "Tuner Conflict" and "No tuner available to meet the current demand" error messages when switching TV channels less Win