Computer turns Off at the start and can not reinstall windows

Hello, I'm Paul and I * generally * use my mac. At the point where I need my Windows laptop, I can't use! I recently had Windows reinstalled, and after some time, he asked to * automatically install a driver *. Well, which brought an end to the life of my computer. It was the 12' th reinstalling windows. now when it starts, it just turns off. I tried to insert my CD of Windows Vista, but guess what? It says "Windows loading files...". ", and then it shows this screen of Microsoft Corporation loading with the bar and the bars green bit into it. After a little while ago, my computer just turned off! How the _ am I supposed to reinstall Windows (well, actually, install Ubuntu ^. ^) now? I tried it, but:------all else fails.

Please HELP, it's so sad. I will not buy another Windows computer.

~ Paul Côté

Advertisement

For any problem with reinstall Vista from recovery of the manufacturer support, contact the manufacturer of your laptop.

This isn't their recovery process, Microsoft

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To reinstall from a Microsoft Vista DVD:

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To install Ubuntu:

http://UbuntuForums.org/

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I had to do are install disks initially provided. My computer turns off during the process and did not finish. Info please.

    I had to do a re system install the OEM disks but my computer starts to spin off before the reinstall is complete. As my dischas been reformatted I can't access control panel to reset the timeout settings. Advice please.

    Hello

    You tell us why you had to reinstall.

    If it keeps closing, it looks like you have a hardware problem.

    The OEM recovery disks are provided by your computer manufacturer.

    For problems with their recovery process, you will need to contact them.

    See you soon.

  • IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code.

    IPhone 6 continues to go to the turning off of the screen and the screen where I enter my access code to return. I hit Cancel on the stop screen or type my password the password screen and it goes back to the screen, I was on. I did a reset, all settings, but not him erase all content and settings. I went all day without any problems and an ago he started to panic. I took the cover of a few days ago thinking it might be the cause of the problem by pressing the power button, that wasn't the problem. Can someone give me some advice on what could be the problem?

    I have not updated my phone to the new IOS

  • computer won't goto sleep IE screen turns off but the hard drives will not be

    No matter what I put in power options, the computer won't go to sleep.

    The monitor turns off but the hard drives, fan to continue working.

    I can't force the drives to put beyond the control of the characteristics to uncheck in the power options.

    The computer turns off when the power off but sleep option does not work.

    Thanks for any help.

    Hello

    Thanks for posting your question on the Microsoft community.

    I would like to know some information about the problem so that we can help you better.

    What is the brand and model of your computer?

    Thank you for details on the question and your efforts to resolve.

    This problem may be due to the following reasons:

    -The drivers are not updated.
    -Power option settings are incorrect.
    -The devices connected to the computer are preventing it from going into standby mode.

    I would suggest trying the following methods and check if it helps.

    Method 1:
    Run Troubleshooter of power and control.
    Reference:
    Open the troubleshooter of power
    http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

    If this does not help, use method 2.

    Method 2:
    Please use the suggestions in this article and check the issue.
    Reference:
    Windows 7 is not going to sleep
    https://Support2.Microsoft.com/kb/976877

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Bluescreen error: bccode 116; computer turns off on the reboot screen everything seems fine.

    Original title: while using the computer turns off on the reboot screen, everything seems fine. received message the last time. Signature of the problem: any suggestions?

    While using the computer turns off on the reboot screen, everything seems fine. received message the last time.

    Signature of the problem:

    Problem event name: BlueScreen

    The system version: 6.0.6002.2.2.0.768.3

    Locale ID: 1033

    More information about the problem:

    BCCode:                                               116

    BCP1:                                                    863A52A0

    BCP2:                                                    8DC1C152

    BCP3:                                                    C000009A

    BCP4:                                                    00000004

    OS version: 6_0_6002

    Service Pack: 2_0

    Product:                                               768_1

    any suggestions?

    Hello

    Try the procedure described in the following article.

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly?

    http://support.Microsoft.com/kb/958233

    In addition, update the drivers for graphics cards and check if it helps.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

    I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

    Hello WillieBouma1,

    You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • All-in-one HP Photosmart C6280 not connected to the internet, and can not scan to computer

    My HP Photosmart C6280 all-in-one not connected to the internet, and can not scan to the computer.  I got it for a few years and must plugged into my Macbook to print, but now I want to use it to scan photos directly to my computer.  Can someone help me to do this?  Much appreciated!  (Not sure where are my original softward records!)

    Oh, OK, well this isn't probably the problem, but for good measure, you should get the latest version of the software for your printer from the "support & drivers" link at the top of this page.

    In the meantime, we will reset the printing system:

    -Go to System Preferences > Print & Fax
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Top of the window, Select the default tab . Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • came from the DollarPhotoClub and can not find my unused downloads in Adobe Stock.

    I'm from the DollarPhotoClub and can not find my unused downloads in Adobe Stock.

    Last chance to migrate to Adobe Stock - don't miss out!

    Download 98 unused downloads for Adobe, which is valid for another year!
    Search for images, to access and manage their assets within your favorite Adobe Creative Cloud Desktop applications

    Hi SunlessNinja

    I checked your account and as you can see, there are 72 licenses available - 62 transferred to CPD and 10 of your new Adobe Stock plan.

    Sign in with your Adobe ID to stock.adobe.com and you should see available licenses.

    Let me know if you still have any questions.

    Thank you

    Bev

  • I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

    I lost the small contraption white balance eyedropper and the possibility to change the exposure and can not find a way to get them back! Help! Thank you!

    You say you have lost the tab "tool"?

    If so, just right click on one of the other tabs and select "basic" in the context menu that appears.

  • Do not click on in the VM and can not move files between hosts and virtual

    Do not click on in the VM and can not move files between hosts and virtual

    Home - Windows XP x 64 Edition

    Virtual - Windows 2003 Web Edition

    -vmware.log

    ...

    sept 23 14:10:17.875: mks | Setting size 40 pile of thread to 1048576.
    sept 23 14:10:17.875: mks | Adjusting size of 41 of the stack of the thread to 1048576.
    sept 23 14:10:17.890: mks | USBGW: Writing referee op: 13 len:36
    sept 23 14:10:21.718: vcpu-0 | Unified TOOLS loop capacity requested by 'box to tools-MDN; now sending via the TECO
    sept 23 14:10:21.718: vcpu-0 | GuestRpc: Channel 7, toolbox-MDN app reviews.
    sept 23 14:10:21.718: vmx | DnDRegisterRpc: Rpc of DND already set to 1
    sept 23 14:10:21.718: vmx | CopyPasteRegisterRpc: already the value 1
    sept 23 14:10:21.890: vcpu-0 | VMXVmdb_LoadRawConfig: Loading of raw configuration
    sept 23 14:10:22.000: vmx | DnDRegisterRpc: Rpc of DND already set to 1
    sept 23 14:10:22.000: vmx | CopyPasteRegisterRpc: already the value 1
    sept 23 14:10:23.750: mks | USBGW: Writing referee op: 13 len:36
    sept 23 14:10:30.703: mks | Setting size 40 pile of thread to 1048576.
    sept 23 14:10:30.718: mks | Adjusting size of 41 of the stack of the thread to 1048576.

    ...

    Any ideas?

    Thank you

    If your license key allows, update your VMware Workstation version 7.1.4

    Otherwise, at least upgrade your VMware Workstation to version 7.0.1

    In the menu bar, help-> Check for Updates on the Web.

  • printer do not wake off mode 'sleep' and does not turn off when the Start button / stop pressed or pushed.

    HP printer all-in-one B210a win 7 64 bit.

    no error message just don't wake up from power saving mode and does not turn off when the power button is pressed. must be disconnected and then turned back on. works fine until the power saving mode he did go to sleep then not answer the test print command or Toolbox controls.  power saving mode is turned off, but still goes to sleep.

    First, you will need to make sure that the printer is under warranty.  You can do it here.  So, if you are in warranty, you must contact HP at 1-800-474-6836 and the United States in computer science, international users click here.

  • Power problems: computer turns off when the power supply cord is unplugged.

    original title: power problems: computer shit turned off when the power supply cord is unplugged.

    I have a HP Pavilion dv2000

    Windows vista home premium/sp2

    AMD Turion (TM) 64/2 1.80 ghz processor

    1 GB memory

    32 bit operating system

    I have 2 problems with this laptop.

    !. I have lost the power cable and bought an expensive one online step (model: PA-1650-02 c. input 100-240v 1.5 put out a(1,5A) 18.5V 3. 5 = a)

    When I first plugg cord battery charge light came on the balance, then he started to come on and outside.

    now its completely off, even with the power cord plugged in. on the lower right part of the screen its showing that cord is connected to the power supply and the battery is fully charged, but as soon as I unplugg the power cord or remove the computer cut right away.

    the second problem is that the left mouse botton does not work, the work aside right very well. I went in the proprties to put it right, click on to, but who does not work either. I've updated the drivers but still nothing.

    Any help will be greatly appreciated.

    Hi aloum,.

    (a) what kind of mouse you are using?

    (b) the left button of the mouse seems to be stuck or it does not meet the click? This only happens with certain applications?

    Step 1: Test the mouse on another computer or another mouse on the test computer

    To determine whether the mouse or the computer is defective, follow these steps:

    1. test the mouse in question on a system that works, you know. If the problem appears to follow the mouse, you may need to return or replace the mouse.

    2 test a mouse you know is working on the computer in question. If the problem seems to stay on the computer, then the problem is most likely related to the software.

    In regard to the battery not holding charge

    Battery problems are often associated with the battery itself. If you encounter this problem, contact your mobile PC manufacturer. If you purchased the battery separately from the notebook computer, contact the manufacturer of the battery.

    Troubleshooting battery problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-battery-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • When I pick up my Windows 7 Acer Aspire power, the computer turns off when the battery shows fully charged

    I HAVE A CHILD OF 1 YEAR ACER ASPIRE WITH WINDOWS 7, WHICH IS CONNECTED TO BE WIRELESS. BUT WHEN I GET MY COMPUTER TURNS OFF THE POWER SUPPLY CORD. THE BATTERY SAYS FULLY CHARGED. IT WORKED AND NOW IT WONT. SOMEONE CAN ME SAY WHAT THE PROBLEM IS. I EVEN WENT BACK THROUGH HIM WITH DEFAULT AND IT DID NOT HELP.

    Hello

    Are you aware of any changes made to the computer, before the show?

    I suggest to change the power management and check for the issue.

    Change, create, or delete a power plan (scheme)

    http://Windows.Microsoft.com/en-us/Windows7/change-create-or-delete-a-power-plan-scheme

    If the above does not help, I suggest you to contact Acer support for assistance.

    http://support.Acer.com/us/en/default.aspx

    I hope this helps.

  • Reinstallation discs isn't and can't reinstall windows 7 to upgrade to windows 10

    Original title: reinstalling Windows 7

    My computer laptop windows 7 currently does not have an operating system on it due to a technical error. However, I have not all re-Setup disks and impossible to reinstall windows 7 to upgrade to windows 10.

    I found the link https://www.microsoft.com/en-gb/software-download/windows7 where you can type the product key for portable computers to download an iso file of Windows 7. However, my product key doesn't seem to work, and I can't find another way to get the files of windows 7, which I am legitimately entitled to.

    Any help or advice would be greatly appreciated.

    You will need to get an installation disc to a friend that has the same version and 32 bit or 64,

    Or contact the manufacturing of computer for the recovery media

    It's that or use google and search for a torrent with a torrent client download

    Use Digital River mirror or pcsteps download ISO windows 7 legally and for free as your search ;) terms

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-windows_install/clean-reinstall-Windows-7/0ae269fd-167e-423B-94EF-26133f89e10c

    You can get a clean here qbittorrent

    https://ninite.com/

  • I don't want the magnifying glass or the calculator to appear on the screen and can not turn it off.

    I am trying to turn off the Magnifier and the calculator screen and don't know how

    http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

    Above is how to disable the magnifying glass

    There is a screeen on keyboard:

    http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

    See you soon.

    Mick Murphy - Microsoft partner

Maybe you are looking for

  • Error-200278 occurred at DAQmx Read

    Hello Following an updated example developed by an engineer to support NOR super useful. I did a routine very simple acquisition of a certain level of synchronization between tasks (attached) to use in a PXI system between modules of strain gauges (4

  • How can I get games to STOP Explorer followed my statistics?

    I don't want windows to follow my statistics, how to prevent this? Y at - it a registry key somewhere? I can't find an option.

  • Cannot install Registry booster.

    Original title: RB (registry booster I paid progam and cannot install the registry # was incorrect unable to communicate with them

  • Download problems - "Preparing to copy" box appears, and the download stops.

    Hello good Samaritan! :^) I will describe the most recent appearance: I tried to download the vines 'Video Vacant"single by 1. By clicking DOWNLOAD and 2. Clicking on SAVE (according to instructions). Download proceeded normally (and quickly) until a

  • Slog2 logfile send

    Hello together, I am currently facing a bug, which can be found in the production, I wanted to add the ability to send the log file of the application for me. I did the following: Button { text: qsTr("Logfile an Entwickler senden") onClicked: { conso