computers do not recognize router WRT110

Similar Questions

• Other computers do not recognize my share of Windows Media Player

  I have a home wireless network (internet provided by cable via Virgin), two desktop and two laptops. I'm trying to share my music, photos, etc. via Windows Media Player, but the computer where I store all my files does not recognize one of the other computers. I use Windows XP on desktop and 7 on laptops. I have been through the section Windows Hekp nothing helps. Clues?

  Hello

  What operating system is installed on the computer where you saved all the files?

  Method 1:

  You can check out the following link and check:

  http://Windows.Microsoft.com/en-us/Windows7/help/sharing-files-and-printers-with-different-versions-of-Windows?T1=tab02

  Method 2:

  Share your multimedia files

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/share-media

  Stream your media to devices and computers using Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player

• BlackBerry Smartphones computers do not recognize that Pearl attached

  My two laptops do not recognize when the Pearl is more attached to them. The Desktop Manager shows that no device is connected. The phone company said that Pearl may have become faulty. The device is not even a year old and it worked fine with the Desk top Manager to sync with my Outlook (address book and calendar). I've lost this ability, two weeks ago. Unfortunately, none of the fixes listed here appear to have worked. Are there other people who have had or have the same problem? Any soloutions that worked? Thank you.

  Well, I thought I read that in the post, sorry.

  I always thing it's worth a trip to the local service company and see if it can be detected here.

  It is still the only common element. Charge does not guarantee that all of the pins used for the transfer of data

  are in use, necessarily.

• Computer does not recognize router befsr41 after that I tried to reset it.

  So earlier today, I tried to reset my router because for some reason that I could not log in with my password I use normally, after switching to AT & T of the Charter (from DSL cable)

  Just after that, we moved the router does not either, but we called linksys for repair, but we had to pay $30 and I'd rather not do it again.

  Anyway, my computer will not completely recognize my router. I can't access it is based on the web options page, if I try to use the CD it will say that my computer is not connected. I know the cables are connected correctly.

  Oh and also, why I couldn't use my old password?

  Someone at - it an idea on what could be wrong?

  As you have activated your ISP to a cable on the DSL. The first thing you need to do is, pick up your Modem to the router. Let your Modem is connected to your computer. Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Once you connect to the Setup page of your router, on the Configuration tab, you need to change the local IP address to 192.168.2.1 and click on save settings.

  Once the settings are successful, unplug the power from your router and Modem. Connect the Ethernet cable from your Modem to the Internet Port Linksys router. Connect the power to your Modem first, wait until all lights are cover, connect the power supply to the Linksys router. Once all the lights are solid check if you are able to browse the Internet on your computer.

• Network Wizard and configure disk do not recognize router wrt150n

  I can't use easy Link Advisor because implement used ect recognizes the router and the program crashes. Any help appreciated.

  If your Internet Service is cable follow this link

  If your Internet Service is DSL follow this link

• My Windows Media Center XP computer does not recognize my Nikon Super Cool Scan 5000 ED

  I have a Nikon Super Coolscan 5000 ED, which I have not used for several years.  I tried to install it using the Nikon Scan software and was a failure.  Site of Nikon said that by Hamrick VueScan will also run this scanner.  My computer does not recognize the scanner and so I can not install the drivers for it.  I tried to connect this device on several different computers and with different cables.  None of these computers does not recognize the device.

  Hello

  As you mentioned that none of the computers recognize this device, you will need to contact the manufacturer and check.

  http://Imaging.Nikon.com/support/

  You can post your request here:
  http://support.nikonusa.com/app/answers/detail/A_ID/238

• Cannot connect blackBerry smartphones... will not recognize

  I'm in a situation little.

  I have a new Curve 8330 and 3 computers can not recognize the device.

  1 pc to 2 macs.

  PC

  1. make sure the usb cables were not defective... used on multiple devices without problem.

  2. turned "on" and "invite" function to the "auto enable mass storage" just to see if that makes a diff.

  3. installed/uninstalled the BB DTM 4.5.

  4. connected directly to the machine, not a usb hub

  Mac

  1. make sure the usb cables were not defective... used on multiple devices without problem.

  2 meet all the requirements of software for my Mac

  3. installed/uninstalled the BB DTM 1.0.2.

  4. connected directly to the machine, not a usb hub

  Is there something that I am missing on my blackberry that does not allow this connection?

  TIA

  Thanks for the help everyone.  I am pleased to announce that a solution has been found...

  The darn on my phone USB pins were bent... not allowing a correct connection.

  Everything is running now.  Thank you

• I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500

  I have 2 computers that are running windows 7 prem 64 bit family. I'm trying to set up a home group, but does not recognize my extra computer. It is on the network. I have a netgear router wnd3500.

  Hi Mark,

  Thank you for writing to Microsoft Communities. The description of your problem, I understand that you have problems setting up a homegroup with Windows 7 computer. Please correct me that I misunderstood.

  
  

  Mark, please don't worry I'll try my best to resolve the issue.

  I suggest to go through the following websites, which provide a detailed description on the homegroup and how to set up.

  Home Sweet homegroup

  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  Homegroup from start to finish

  http://Windows.Microsoft.com/is-is/Windows7/help/HomeGroup-from-start-to-finish

  If you're still having trouble to set up the residential group, please let us know. We will be happy to help you.

• HP 5530: Printer does not recognize the wireless router

  Printer worked so well. Moved and changed via AT & T Uverse and printer HP 5530 network will not recognize the wireless router information. I uninstalled the printer from my ASUS laptop and tried to reinstall nothing doesn't. The cd supplied with the printer woould check not the printer again. The printer is less than a year. I don't know what is happening. Can you help me solve this problem?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• My laptop that is running windows xp does not recognize the computers on the network running windows 7. Any advice?

  I recently created my home network again.  It consists of a laptop running windows 7 Professional 64 b, b Office windows 7 Professional 32 running and a netbook under windows xp home.  Two computers running windows 7 recognize each other and share correctly, but the netbook will not recognize the other computers on the network at all.  They can see it, but then say they can't access them when you are trying to access.  They are all on the same workgroup.  Computers that run windows 7 discovered the network, file and printer sharing, and public folder sharing all lit.  Password sharing is disabled and windows manages the homegroup connections.  Any advice would be appreciated, I need to use computer dvd players 7 on the network to install some things on the netbook.

  Hi mahmorc,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow the steps in the article.

  How to troubleshoot a network home in Windows XP

  http://support.Microsoft.com/kb/308007

  Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After the boot minimum troubleshooting steps, follow section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start and then click Run.

  (b) type msconfig and click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal Startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Update the latest drivers for the network card.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• Router modem does not recognize

  I use a Modem SB5120 Motorola on Comcast, which works perfectly well when it is connected directly to my computer or my old router, a Linksys WRT120N.

  The router is dying slowly, so I bought a new one (Asus RT - 53N). He could not recognize an incoming WAN signal and establish an internet connection, with the exception of one, several hours window. In the contrary case, it seemed to work fine.

  I returned it and bought a Linksys E2500, who seems to have the same problem, because it does not receive an IP from the modem.

  I tried all the settings of the previous router (MAC clone, DNS1 and DNS2 address) mirroring unsuccessfully.

  As far as I know, the modem is not compatible with the newer routers for a reason any (I have or all 4 tech different support people I called) can't think, or there is some kind of configuration setting I'm missing. I'd appreciate any help before I go and buy a new modem.

  New modem resolved the problem.

• Router LinkSys WRT160N V2 does not recognize my USB SMC EZ Connect 11 Mbps Wireless

  I have a Linksys WRT160N V2 router. So far I have correctly connected, using two 'wired' connections, my laptop and the printer. I was able to add two DS, Wii, wireless, another laptop and a PC. The laptop that connected wireless uses the D-Link wireless device and the PC uses an other SMC wireless device. All these things correctly connect through wireless connections. The last PC I tied to conenct uses USB SMC EZ Connect 11 Mbps Wireless. This computer can actually 'see' the Linksys router and this is the SSID. When I try to connect to him, he thinks about it for about 5-10 seconds and then fate and says "Detected wireless networks". Ironically, a neighbor also has a Linksys router. Its protected by WEP, but for some reason, my PC is ready to connect to the Linksys router (has a different SSID), but since I do not know the WEP key (I don't want to actually connect to sound at least) it shows the strength of connection 11 Mbit/s and of course, does not have an IP address. Why my router does not recognize my Wireless Linksys router? I even used the LELA 'Search' application for new devices, and he can't find it, all the while my PC 'sees' the router and fails to connect. Someone knows why? FYI, the PC in question just had XP loaded on it (total reconstruction) and has never been only once on the interent.

  If you have disable wireless security is disabled, and if still you are not connect to your wireless network, then I think you should try upgrading the drivers for your SMC card, once you update the drivers for you adapter after this you can try to connect to your wireless network.

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.

• BlackBerry Pearl Smartphones does not recognize Talk Talk wifi router

  My BB Pearl 8120 picks up wi - fi very well, but I just replaced my home router and does not recognize it when I scan for networks.

  All other wireless devices in the House (TV, laptop, I - Pad, son phone) connect without problem.

  Help, please

  Hi tonyshoesy

  When you have changed your Wi - Fi router home, did you use the same SSID or did you use another?

  Thank you