HP 5530: Printer does not recognize the wireless router

Similar Questions

• Satellite A110-294 does not recognize the wireless card

  Hello

  the question is:
  Why my Satellite A110-294 does not recognize the wireless card?

  I re - install Xp PRO with all the drivers.

  I have try all the drivers Wireless: Wlan intel + proset intel atheros wlan + wlesscmgr

  I don't understand, can you help me?

  Thank you
  André

  Hello

  To my knowledge, the A110-294 uses the Atheros WLan card and therefore the Atheros Wlan dirver should be the right one.

  You can find the latest driver for Atheros WLan here:
  http://APS2.toshiba-tro.de/WLAN/

  Just a question;
  You see the local network card in Device Manager? I mean, you should see an Ethernet controller or an unknown device in the network adapters
  The driver is missing, then the device must be marked with a yellow exclamation point

• Equium P200 does not recognize the wireless network with Win XP card

  Dear team

  I recently installed windows XP on my Equium P200 (he had originally vista).
  Now, I have a problem with the Atheros wireless card. The computer does not recognize the wireless card is installed. I tried uninstalling the drivers and reinstalling, but nothing works. In the hardware Manager, I get an error code 10 when you try to install the drivers. Can someone please help.

  Thank you

  Are you sure that you have an Atheros WLan card installed on this laptop computer at 100%?
  I recommend you to check the bottom of the unit. There are labels with information about the wireless network card! I think that there is a number. Then google for this number and you should get information on the wireless network card.

  Eventually he s one card Intel. | In this case, you should try to install the driver from Intel.

• the wpa security password configured on my hp printer does not match my wireless router setup

  the wpa security password configured on my hp printer does not match my wireless router

  You will need to go to the menu on the printer control panel and then go to the section wireless/network to change. Sorry for the general response, but without specific identification of your printer I can't advise you with precisely where in the menu to go.

  Thanks for posting the p/n. look on the lower back/side/tray of your printer.

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Satellite L655 sometimes does not recognize the wireless card

  I have a L655. Most of the time it works perfectly fine. Sometimes when I turn on my computer, it does not recognize my wireless card. He considers that it is not at all.

  The icon in the status bar says that there is no cable ethernet plugged in and nothing on the wireless.
  Usually this icon is not present, and one for the wireless is (whether it is connected or not and if there are connections available or not). In the device manager there is nothing for the wireless card.

  Under network card it has only ethernet. Its as if it does not exist.
  Basically the way to solve this problem is by restarting simply my computer until he figures it.
  Sometimes, it can take 5 or more times.

  Any help please?

  Hello

  What satellite L655-xxx you have exactly?
  As far as I know there are different models with different wireless network cards.

  Your BIOS is up to date? Please check this box.

  So now to a few proposals of solution:
  First of all that I recommend to check if the update of the Wlan driver would improve the Wlan functionality.
  In addition, you must deactivate the energy saving feature for Wlan in Device Manager and Windows 7 power options as well.

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.

• OfficeJet Pro 8100 does not recognize the new router

  I saw this question for other printers, so I hope that there is a response to mine.  I just upgraded the speed of my internet service which involved a new router.  We made sure all the computers in the House worked with her, but I forgot to try the printer before the technician left.  Now my computer thinks printer Officejet Pro 8100 is offline (turned off) and the blue light on the printer blinks.  How can I get the printer to recognize the new router?  I guess I have to add that I do not know where to find the code of the intellectual property that is asked for when I go to the start menu, the HP folder, select my printer, etc.  He said: push the button on my printer wireless, so I push button blue flashing light but that does not produce a number.  Help appreciated!    It's an ATT router and I have the WiFi network name and wireless password.

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• C4385 does not recognize the new router

  Just changed internet service providers.  Although I used this vendor before and not had any problems with my printer, I now have a problem.  My C4385 will not recognize the new network.  Hp network connection software that I run has no effect.   It will not detect a network even if my computer shows an excellent connection to the network.

  When I run the wireless network test report it shows "FAIL" next to "Network Name (SSID) Found."  The recommendation is to "check that your HP printer (SSID) name exactly matches your name (SSID) wireless router.

  I am completely baffled by the present.  I've seen other questions that are similar to this, but none that refer to my model exactly.  Any help is appreciated.

  Please, try the following:

  1. disconnect the USB cable from your printer

  2. make sure to delete any previous copies of your HP printer from the printers (in Control Panel) screen

  3. restart your PC

  4. under the printers screen, enter the following print server properties screen:

  XP: File > print server properties

  Vista: right click on the area of the screen information, and then select run as administrator > print server properties (law as Administrator option will not allway appear)

  Win7: Select any other printer in a left click and you will see the properties of the print server to the Menu bar top

  On the Ports tab, be sure to remove any existing TCP/IP port.

  5. remove temporarily disable your firewall software

  6. start the installation and select reconfigure the network connection / add a device.

• Why my printer does not recognize the elements I want to print from the internet?

  When I try to print anything from a website, as my printer opens, but then a box shows that the printer is not not connect while I can print the item.

  What version of Windows, including service pack, do you use? (Note that the article referenced by the 'Support' engineer applies to some versions of Internet Explorer used with Vista and Windows 7).

  What printer brand and model do you have?

  How the printer is connected to the computer (Networking Wireless, wired, USB, parallel, others)?

  What is the exact text of the error message, without paraphrasing?

  What happens if you go on the web site by using Internet Explorer and try to print?

  Does the problem occur at more than one web site? If no, please indicate the URL of the web site problem.

• Problem/Windows XP print does not recognize the print requests.

  I receive a notice of Windows "print spooler service" does not work. I tried to fix this by using the "help and support service, but Windows has informed me that this service does not either!  I can't print anything!  My printer is connected correctly, but no longer recognizes my OS (Windows XP).  How can I restart the "print spooler" service and "help and support the service?

  Hello

  I recommend you follow the steps and check if the problem persists.

  Restart the print spooler service and see if it helps.

  a. Click Start, run, type "services.msc" and press ENTER.
  b. scroll down to print spooler.
  c. start the print spooler service.

• 4630 printer does not recognize the custom page size

  I print a lot of thank you notes, which are the size of page 6 x 9, and the margins must start lower than the middle of the page. The problem is that the printer won't let me in the custom page size, rather it wants to print A4 size or format card index or one envelope size. How can I make the printer recognize the format of the exact page?

  Hi Scubaluvyand thanks for getting back to me!

  I recommend the rest of this paper on create paper formats in Windows 7

  Please hold me!

• Laptop does not recognize the wireless device

  Same problem here.  Feature WiFi suddenly stopped working after a windows vista updated.  Wireless switch is engaged, messeges troubleshooting all say computer doesn't detect any wireless devices.  It's as if someone pulled the unit and the antenna of the portable computer.  I also downloaded the wireless drivers and Setup several times without success.  Wireless device appears in the Device Manager page.  The only thing that is showing and work is the cable which is how I can download the drivers and appear on this forum.  Is it possible that the wireless device is broken?  All applicable lights are lit on the networking modem, no signal is detected on the computer, I have concluded that the wireless on the laptop is just inop.  Either way, I have a Compaq Presario F730US laptop.  All the options out there?  Thank you

  Hello Bdufaud,

  Thanks for posting in the Microsoft Answers forum!

  You mentioned that your WiFi feature worked well until a recent update. Do you remember when the update occurred? An option that can help is to run aSystem Restore, making sure to select a previous restore point when the problem started to occur.

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• PC laptop Pavilion 15: adopting WIFI does not scan the wireless router

  my laptop isn't the router which is connected with a scan line comes from the wifi broadband

  Hey @hadi_0550 ,

  The adapter seems to work and as stated above you the HP Support Assistant for the wireless.

  Thank you.

• Windows does not recognize the wireless network card drivers

  I have a laptop Compaq nx9010 XPsp3 I runnings tried to install the drivers for a laptop of Belkin F5D8011 wireless card.
  I downloaded the correct driver in the downloads folder, but when I point the driver update wizard in the file I get a message telling me that there is no driver in the folder files. Belkin were not very useful, they just gave me a link for the driver.

  Is that mean that the driver is not suitable for XP, even if Belkin says it's? Is is possible to install the driver, without the help of the wizard? Is there something wrong with XP (newly installed)?

  Perhaps the file is a. EXE which must be run to install the drivers?