computeSpectrum is not working in CS6

Similar Questions

• Action requiring a Camera Raw as a filter will not work in CS6. [was: Camera Raw Plugin will not be installed]

  I asked this question yesterday on the forum, and the answers I got were not useful.  This forum has decided to mark my question as answered and he did NOT.

  Re: No Camera Raw filter in CS6

  I still have the problem.  According to Adobe, I should be able to make the plugin work for CS6, in accordance with this link... Installer Camera Raw Adobe Photoshop CC and CS6

  I did everything it said to do, (several times)... and it still does not work.  Please help me.  And PLEASE don't mark my question 'answered' until it is actually responded.

  Different question.

  The Action requires that Camera Raw as a filter (in the menu Filter) which is only available with the versions of Photoshop Cloud (CC).

  As explained in your other thread, Camera Raw is available as a plug-in for CS6 only so that you can open Raw files and edit. Camera Raw takes place automatically as soon as you try one open a Raw file.

  In CC, Camera Raw is also available as a filter (in the menu filter in Photoshop) - who depend on this Action. It won't work in CS6 because Camera Raw is not available as a filter in CS6.

  In other words, the Action is not compatible with the CS6. It only works with CC.

• Shortcut keys does not work in CS6

  Since the upgrade to CS6, all shortcuts keys do not work.

  For example, pressing "M" to go to the marquee tool has no effect, but "Command-T" (for processing) works very well.

  This little bug prevents me to change one of the main tools, which hurts the flow of work badly enough.

  Ah! It seems that there is a preference for her under general > use Shift key for tool switch.

  All is right with the world now.

  Thank you!

• the MTS files do not work in CS6... Why not Adobe

  If I have a file in my camera sony in Prem Pro .mts, reports the video but no sound?  If I have him drop it into CS5.5 sound works.

  I downloaded an updated version of the Prem Pro from Adobe today June 2012. And still he will not address the mts files?

  I don't understand why it is so difficult to find a solution to this problem. two of the worlds biggest companies Sony and Adobe, and none of them covers the question on their site, and yet it is clearly a major problem?

  I've seen talk about on the site of renaming of files, which does not work and would be a pain in the rear.

  Does anyone have a solution that works?

  Please?

  FIXED Yipeeee!

  It is not all good news though, but I have a solution that will definitely work for you, all that it's a bit drastic

  This problem has been to kill me. I just want to be able to drag and drop the MCS file in first pro, as I always have with other video files and all the nonsense to shoot the whole folder structure just won't DO, we do not live in the 70s. And thank God, the file structure is just stuff and nonsense.

  What is happening is that... something on your PC does not work files (and Adobe do not have any idea what it is) and besides that I do, but until a person learns, I can tell you that a full blow and reload new windows will be 100% solve the problem.

  Now, I don't have one for years, so it was a complete pain and took more than a day to recover all the way I like it and to be honest, it will be a week before as I have all my favorite programs work properly.  BUT I can tell you that with Premiere Pro installed, I can now just PULL THE FILES FROM the CAMERA PHOTO HARD DRIVE and let FALL THE LIKE ANYWHERE and better yet, pull them in first ruined as I want and they play 'Sound and all' and that my friends is the way it should be

  I really hope this helps some of you, I'm glad it works now and I can get some work done, I began to hate my new camera, but now, I can tell you it's A1

  For Adobe, I can tell you that some parameters of another installed program system is clearly the culprit but I can't for the life of me tell you who.  I can say that it is not mine, or the programs fault but a lack of tests on from Adobe.  Because clearly, it is not, and a good number on your forum, and many others. Software should work under any scenario, I'm not running certainly all the strange programs that should cause this.

  Until Adobe can pin point a solution and patch their program, I can recommend my solution buy guys and girls make sure to save all your mail, Favorites, passwords, documents and any other valuable to you before doing a clean install and if you will reply in the Groove with our favorite editor PP CS6.

  TTFN

  I need to get some work done

• Shortcut does not work in cs6

  The shortcut - h command does not work. But it does drop down under Dreamweaver menu bar. On a mac 10.7.4

  I can confirm that Cmd + H does not work in DW CS6 on a Mac. However, Cmd + Q works every time for me.

  When you find what you think is a bug (and Cmd + H is certainly a bug), the best place to report it is via the application form of feature/bug to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishformreport.

• Save as not working PS CS6 beta

  When I have a PSD file and try to save it, it will be now let me save it as a JPG, CS5. Even after flattening the image, I find often that does not work instead of Save as JGP as intended, he PS modifies it IMG.

  I just had the same problem trying to save in PDF, PS format changed the extension to JPF, I finally found a work around, kept jut ging to the bottom of the list of files, until PS has decided to add the PDF extension I was looking for.

  I tried to completely remove the CS6 and re install it, no difference.

  Has anyone else had the same problem?

  Vibeke

  In fact, if you see problems with the extension / file type mixup, chances are very good that you managed to tie in some plug-ins from a previous version of Photoshop.

  You won't mix plug-ins from different versions of the product.

  You copied the tree plug-ins from a previous version, or you have defined an Extra Plug-ins folder that points to the plug-ins folder from a previous version.  That cancel and you will still get a rational behavior of Photoshop CS6.

  -Christmas

• My compensation filter does not work in Cs6: Seamless pattern problems

  Hi all.

  Im trying to create a seamless model. by using many layers.

  Im going to filter/other/offset /, adding vertical or horizontal dimensions such as 2953px (image size is 2953px x 2953px). and by checking the box "wrap autour.

  But it does not work and is culture off loads of the layer, not transparent at all.

  I tried with another layer, and the same thing happens.

  I have "revealed all" and shows nothing. I tried to remove the transparent noise pixels around the layer, I am trying to wrap.

  & I also selected all & then cropped the image, but it is always the case.

  I googled until my heart's content, but found no other idea on how to solve. Any ideas?

  All my layers are brushes I created and used so many transparent textures. But it would be a problem if I tried all this would?

  Thanks in advance.

  "" Photoshop is not a "tool of compensation", as I know not, but a filter called Offset.

  You can try cropping the image to the canvas size (select > all, Image > Crop) before applying the offset?

• AppleScript to resize images in Photoshop CS4 will not work in CS6 - help!

  Hi people.

  I am new to this lark script and hope someone can help...

  Our Nigel, unfortunately is no longer with us, wrote a cunning to convert script photographs large size smaller using Photoshop CS4.

  The workflow is the following:

  You open Photoshop

  You have two files, one with the original files and the other which is empty.

  You drag the folder with the original files on the .app and he asks a destination folder (tell you him to use the empty folder).

  The images are then opened one by one, resized, some tape removed and are then registered to the empty folder (formerly).

  Lovely jubbly.

  The problem is when you try to use this app with Photoshop CS6 - it fails at the point of backup files in the new folder which gives this error:

  Adobe Photoshop CS6 has been an error: "unable to get document"075.jpg". (- 1728)

  I fiddled with the script a little and it seems don't not like the section "with options" command 'Save document' (it works fine if I completely remove the fuse "with options" - but I need than LZW compression).  I have trawled through a few similar questions on these forums, but have not been able to track down the problem. It probably doesn't help that I'm not a programmer (just try to translate as I oppose using the Photoshop CS6 AppleScript reference guide).

  Did everyone there knows the problem please?

  The script is below.

  on Open ()pourla)

  set theDestination of (choose folder with guest 'set the destination for the files processed...) ") as text

  tell application "Finder"

  set isContainer to fake

  set theItem to agenda 1 of pourla as string

  if last character of theItem is ":" then

  set list of files to files of all of the content of agenda 1 of pourla

  on the other

  set list of files to pourla

  end if

  Repeat with x in list of files

  set Dittos to x as texte

  set theFileName to name of x as texte

  set outFilePath to theDestination & theFileName

  if theFileName ends by ".db" then

    --

  on the other

  tell application "Adobe Photoshop CS6"

  -I was skilled enough change the foregoing of "Adobe Photoshop CS4".

  set units of the rule of parameters to units of mm

    Open alias theFile

  set theWidth to width of document theFileName

  set theHeight to height of document theFileName

  if theWidth > theHeight then

  Resize image document theFileName width 65 resolution 400 resample method bicubic

  on the other

  Resize image document theFileName height 65 resolution 400 resample method bicubic

  end if

  convert document theFileName profile ' Coated FOGRA39 (ISO 12647-2: 2004) " intent perceptive with blackpoint compensation without dithering .

  { adjust layer of art 'History' of the document theFileName with curves with options { }class:curves points of the curve: {{0, 0}, {128, 128}, {243, 255}}}

  { Save document theFileName in outFilePath like TIFF adding tiny extension with options { }byte order:Mac OS embed the color profile:fake image compression:LZW} without copy

  close document 1 saving no

  fin say

  fin if

  -display outFilePath dialog box

  fin Repeat

  fin say

  end open

  file name

  Try this.

  game of myOptions to {class:TIFF to save options, the byte order:Mac OS, embed the color profile:false, image compression:LZW}

  Save document theFileName in outFilePath as TIFF with options myOptions by adding the extension lowercase without copy

  HTH.

• CC2015 layer styles does not work in CS6?

  I have Adobe CS6 and sent recently a 2 styles to work on and 3 sets of layer styles that come with it. When I insert the layer styles only few of them see the upward in the window. Is there a compatibility issue that makes the layer styles can be transferred to the old versions? Any help asap would be appreciated!

  With PS 2015, you can have several layer styles, as several different shadows. Is not backward compatible with CS6.

• Draft mode does not work in CS6 [subject edited by Moderator]

  Hello, I use DW CS6.  Brilliant was working until a few weeks ago.  The project view option is no longer works.  Instead of showing me a draft of my code, are all he show these strange buttons.  I can not us it.  What should I do?

  In Dreamweaver CS6 works draft view nicht mehr die.  Es keine graphische representation of Codes more green.  ICH in der absolut nichts bearbeiten drafts may.  Hat das same problem und nen Losungsvorschlag someone?  Danke

  Check if you have elements of head is enabled in the view menu.

  Go to View > happy head and to, of course, it is disabled.

• Spent 680 GTX to the 770, now MPE is disabled and the recording will not work in CS6.

  I recently had to return an EVGA GeForce 680 via RMA failure, and as EVGA was more than 680's in stock they sent me a 770 instead.

  I installed the card and reinstalled the latest drivers, and I got this error message when you open a project (CS6):

  "This project has been modified used with Mercury Playback Engine GPU Acceleration (CUDA), which is not available on this system.  Mercury Playback Engine Software only will be used"

  I also get the following error message when you try to encode: "recorder captured No. Frames"

  I have so I uninstalled and reinstalled everything using this sequence:

  -Uninstall the wipes and utilities Matrox

  -Uninstall Adobe CS6

  -Run Abobe vacuum tool

  -NVidia drivers run Setup (ver. 337.88), making sure to check 'Perform Clean Install' (I installed only graphics and HD audio drivers. No 3D Vision, physx and GeForce experience)

  -Install Adobe CS6

  -Update Adobe CS6

  -Install the Matrox utilities

  -Restart the PC and the power of Matrox cycle

  -Install the Matrox models

  The Matrox I use is THE MX02 w/MAX (version 7.6.0.1993)

  Windows 7, Adobe CS6

  After re-installation, I still get the same error messages.

  Can someone please offer assistance so that I can get back to editing?  Thank you!

  The 680 was on the list of "Supported", the 770 apparently not. No worries. It works, they just never specifically tested and they do not want to engage in something that they haven't tested.

  Just delete the file named cuda_supported_cards.txt and the problem will disappear.

  Regarding your Matrox stuff, I have no idea. I'm sorry.

• MP4 Sony XDCAM-EX does not work in CS6

  Well, it is said

  "mp4 Sony XDCAM-EX" files worked before I formatted and reinstalled everything (also changed to win 8 to win 7)

  It stoped working after

  I tried to uninstall and reinstall

  6.0.1 & 6.0.3 updates

  (standart stangely & update 6.0.1 said "the file has no audio or video stream.") When you try to import. Apres_que 6.0.3 "not supported or damaged file")

  install codecs

  but no, not started to work

  CS5.5 installed

  work on this

  ...

  so, I don't need to fix, but it would make my life easier.

  So, any idea how to run again in CS6?

  (a little boring, where the possibilities are endless (win 7 change, own discs from toshiba with I didn't 100% completely reinstall, other drivers, settings somewhere...))

  

  Try this:

  FAQ: Why some codecs and sequence presets missing my Premiere Pro installation?

• On the same machine, the fluid does not work in CS6, but worked A-OK in CS5

  Any suggestions?

  Liquefy in CS6 uses the GPU acceleration. Update your video driver to make it work properly. Unfortunately the flow does not obey the global settings to OpenGL / OpenCL in preferences, so there's no way around that. Eitehr it works or is not...

  Mylenium

• States of the objects Panel does not work in CS6, please help!

  I have InDesign installed CS6 (same license) on my work computer and home computer. The object States Panel works very well at home. At work, the Panel upwards, but it is always empty, even though I have a selected object that has an applied state.

  I think that I have to uninstall/reinstall and I hope that it will work again.

  On a side note, when I save the file down to of CS5, CS6 and open in CS5, the States of the object is now visible. I have attached a picture. Top two images are screen grabs of the file open in CS6. The two photos below are same file open in CS5. See how the States of the objects are visible in CS5 and CS6 not.

  

  Thjnis kind of problem is usually fixed by trashing the prefs see replace your preferences

• Fast Blur does not work in CS6

  

  It does not at all, even when I turn the top. Am I missing something?

  Disable the rendered path ray. If you plan to extrude the layers, you first need to comp the rendered path Ray parts and replace the classic rendering in the main computer.

  Should have been a warning on the effects work is not on the layers of ray traced. There is a working group is about, but you see a normal behavior.