computor pings when I click the mouse

Similar Questions

• The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The slider side does not move when I put the mouse on it, I need to click below or on the arrow down. Once he left the first place, it moves. Also some applications like changing the city the weather button won't change.

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported to cause a problem like that. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• I hear a click hard when I use the mouse.

  Original title: a noisy mouse... need to cut the sound

  My laptop mouse has a loud clicking noise whenever I use it.  How can I stop that?

  Probably not a matter of victory, if the noise occurs when you click a mouse btn examine the mouse settings in the control panel

• Firefox loads, icon on the bar of tasks but when you click the slide of graphics off to the right, but does not fill the screen & when you right-click again, falls back into the icon

  Firefox, Thunderbird and Quicken were active when I loadad & ran a slot machine game. When I left the game & click on icon to return to Firefox full screen, I could see the flash of the image to the right of my screen and disappear. When I clicked on the icon in the taskbar, the reverse happened - the image flashed from the right down to the icon. When I hover the mouse over the icon, the open screens appear with the red X to close, but the same thing happens when I click on this box. Two other programs that have been opened, while the game was active work correctly, only Firefox has been affected. I can't open the program to access one of the menu items that I can't get the image of the screen on the monitor. I did uninstall and reinstall a freshly downloaded copy, I had to use IE, as I am now) but with the same results when I run. I did chose to save my settings, so if something has changed here so maybe that's the problem.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• Prospective Golf Sports simulation mode full-screen on one monitor, but when it runs the mouse would not return to the other monitor.

  original title: two monitors, mouse stuck
  I'm under Simulation of Golf Sports prospective mode full-screen on one monitor, but when it runs the mouse will not return to the other monitor. It seems that the mouse is not bound by the program, but I want to be able to use another application on the other monitor. Any suggestions?

  Hello

   
  What operating system is installed on the computer?
   
  Method 1: You can press the Windows key on the keyboard that appears in the start window and your mouse will automatically gets shifted to the main monitor.
   
  Method 2:
  (a) click Start, type change the mouse settings.
  (b) go to the pointer Options tab of
  (c) uncheck Display pointer trails
  (d) click apply and OK.
   
  Method 3: See if he has all the parameters of the Simulation of Golf to release the mouse button.
   
  If the methods above do not help, you can contact the Golf Simulation for additional help.
   

• How to get a name in the field when I move the mouse to a particular plot on a graph

  Hello

  I have a number of plots on the chart that I chose a multicolumn ListBox. I'm generally around 30-35 locations. Is it possible that I can get the name of conspiracy when I move the mouse over a particular field?

  Some time ago I created an example to highlight a field by clicking the field. See the change attached this original work on the mouse example move rather than the mouse to the top. Example is BT 8.2.

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• WHEN I CLICK MY MOUSE RIGHT IT WON'T SAVE - AS?

  When I go to save a picture or file, I right click the mouse and nothing happens, nothing comes on the screen why?

  Suggestions:

  1. If this problem is not too long, and if your restore points include a date when you did NOT have this problem, please do a system restore.
  Choose this date as your restore point.

  Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
  To sit and wait. The machine restarts when it's done.

  2. If the #1 is not possible, please make a System File Check. It is to find corrupted files and try to fix them.

  Start button > Search box type cmd > look up, do a RIGHT click on cmd.exe > click run as
  Administrator > in this window cmd black and white, type at the prompt flashing sfc/scannow > press the ENTER key.
  Note: there is a space between
  'sfc' and ' / '.
  To sit and wait. It will take time.
  When finished, exit the cmd window.
  Reboot (restart your computer)

• How to stop Windows 7 to change the size of the screen when accidentally moving the mouse or touchpad?

  Ho can I stop win 7 to change the size of the screen when I move the mouse a let way or touchpad as it is quite annoying

  It is a feature of the touchpad on some Acer laptops, known as the multi touch and Dell.  If you open your mouse control panel (type mouse into the start menu), you can use the touchpad settings to disable these features.

  If it solves your problem, click on the link "Propose as answer" below and vote as useful by clicking on the green triangle for the lelft. Thank you!

• Netflix and some games go gray and black when I put the mouse on them.

  When I put the mouse on some games and all the netflix movies, they're going grey and black & wont allow to interact with anything in this area, what should I do?

  Hi Michael,
   
  The issue you described could occur due to corrupted display driver. I will help you solve this problem.
   
  Please provide us with the following information so that we can better help you:
  1. What is the brand and model of the computer?
  2. don't you make changes to the computer before the show?
   
  Perform the troubleshooting steps below and check if helps solve this problem.
   
  Method 1
  Install all the Windows Update including the optional updates on hold and check the issue.
  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/updates-FAQ#1TC=Windows-7
   

  M odes 2

  Check if you find an error in the Device Manager, if you find an error, update the driver for this device.
  1. press Windows + X , and then click Device Manager to open it and check if you find an error.
  2. If you see an error, then make a right click on the driver and then update.

  Method 3

  If the problem still persists, then download the website of your computer manufacturer display driver and then install it.

  You can also read the article below to learn more about the troubleshooting steps on this issue.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  https://support.Microsoft.com/kb/2681286

  Note: If you run Microsoft Safety Scanner then the data files that are infected by the virus should be cleaned exclusively by removing the file completely, which means that there is a risk of data loss.

  Hope this information helps. If not, please write to us with the required information, so that we can offer you additional troubleshooting steps.

• Click the mouse and drag through the animation of Platinum

  Hi all

  First of all - thank you for taking the time to look through and maybe help me with this question.

  I'm just addressing flash actionscript 3.0 cc - so I apologize in advance for my not so much technical jargon.

  In the past, I used actionscript 1.0 to create an interactive html file containing the animation of a hub of a 3D model. Users can click the mouse and drag to the left or right to 'spin' the model around - however they do really is already through the timeline containing 360 pictures of it from 360 degrees. Similar ideas can be found here: Thyroidectomy Interactive

  Now boring I can't use the old code any more that I work in the latest Flash actionscript 3.0 cc

  So, how I do the same thing but in actionscript 3.0?

  So I worked this piece so far

  On my main stage, I have two layers - Layer actions and another layer with my video (movieclip_mc)

  In the layer actions so far:

  movieclip_mc.addEventListener(MouseEvent.MOUSE_DOWN, onMouseDown);
movieclip_mc.addEventListener(MouseEvent.MOUSE_UP, onMouseUp);


function onMouseDown(event:MouseEvent):void
{
  movieclip_mc.addEventListener(MouseEvent.MOUSE_MOVE, onMouseMove);
  //I should put something in here about mouseX  - but no idea what
}

function onMouseUp(event:MouseEvent):void
{
  movieclip_mc.removeEventListener(MouseEvent.MOUSE_MOVE, onMouseMove);
}

function onMouseMove(event:MouseEvent):void
{  
//I have to put something in about total frames - width of movieclip_mc etc but I'm not sure how   

  // this is what someone else did on another forum - but I'm not sure what it means:

       var delta:int = backgroundClip.mouseX - clickedMouseX;
   var wantedFrame:uint = (clickedFrame + delta * clip.totalFrames / backgroundClip.width) % clip.totalFrames;
   while (wantedFrame < 1)
   {  
  wantedFrame += clip.totalFrames;
   }
  clip.gotoAndStop(wantedFrame);
}

  Also, I think I need something at the beginning as...:

  import flash.events.MouseEvent;
import flash.display.MovieClip;
import flash.display.Sprite;

var clickedMouseX:int;
var clickedFrame:uint;
var backgroundClip:Sprite = getChildByName("background") as Sprite;
var clip:MovieClip = getChildByName("animation") as MovieClip;
clip.stop();
clip.mouseEnabled = false;

  
  

  .. but I'm a little confused as to what she means

  
  

  So I understand the principle but no idea how to actually make it work - could someone help explain to me or help with the code?

  Thank you very much to all those who can offer help

  Catherine

  I missed replying to your answer yesterday, although I see it - I turned away by another chore for the rest of the day.

  The game of AS2 code that show you closest matches what you do with the AS3 version.  And if you include all its implications and change a little bit, it should work for you.

  Your AS3 onMouseDown function was missing the mouseX code as you mentioned... converting from the AS2 version it would be...

  function onMouseDown(event:MouseEvent):void
  {

  startX = clip.mouseX;

  startFrame = clip.currentFrame;
  movieclip_mc.addEventListener (MouseEvent.MOUSE_MOVE, onMouseMove);
  }

  The onMouseMove function is somewhat a different story because it stops looking like the AS2 version when you transfer the background object in the picture.  If you were to model after the version AS2, you might find that it will work.  The AS2 version can quite easily transformed into AS3 if you use just the following guide...

  "_xmouse' in AS2 becomes"mouseX' in AS3

  "_currentframe" is that as2 becomes "currentFrame" in AS3

  "_totalframes' in AS2 becomes"totalFrames"in AS3

• When I pick something, it will be automatically moved / dragged around when I move the mouse

  I have a very strange problem. Whenever I pick something (using the normal selection tool or the direct Selection tool), I can't do anything without moving the selected items. So for example I select something (by clicking 1 times with my left mouse button) and then I want to move my mouse to do something else (select another tool, select something else, whatever). When I move the mouse the selected object (form?) will move there (after a short delay). So the object will end where my mouse was, say, half a second after that I started to move the mouse. This makes working with Illustrator almost impossible that you will have to cmd + z whenever you select an item. Right click also do not works for me if I hold my mouse always at the place where I selected the object, the only option I seem to continue is to move my mouse, which of course, you usually want to do.

  I reinstalled Illustrator already, manually deleted the folder ~/Library/Preferences/Adobe Illustrator CS6 settings /, and I tried it with a different mouse. None of this solves the problem. Photoshop works well. I compared the behavior with the Illustrator on another computer, and it is certainly not correct.

  I use Illustrator 16.0.4 (CS6) on OS X 10.8.3. As far as I know, I have no 3rd party plug-ins. I couldn't find anything on other people having similar problems.

  Someone at - it an idea? Or otherwise, I am afraid that I have to reinstall my Mac together with an OS fresh and everything...

  I tried to use the guest on my Mac account. In the guest account, Illustrator works perfectly!

  Then I started wondering what process (Tools/tweaks) I run by default on my account. Tour off the problem was called by a small background tool called RightZoom. RightZoom let's the green button "zoom in" always expand your active window.

  So thank you! Problem solved!

• How to open 2 sites on start and 1 Web site when you click the home button?

  How to open 2 sites on start and 1 Web site when you click the home button?

  You can change your shortcut on the desktop Firefox with two starting URLS. To try:

  • Shortcut on the desktop: right-click on the icon, choose Properties
  • Icon taskbar pinned: clic click right on the icon, right click in Mozilla Firefox, click on properties

  Windows normally selects the shortcut tab. If this is not the case, go ahead and click on the shortcut tab.

  You will see the target highlighted. On 64-bit Windows, which is usually either not less the following:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
  

  For the specific shortcut launch pages, you can add them to the end, for example:

  "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -url "http://www.dilbert.com/" -url "http://www.gocomics.com/pearlsbeforeswine"

  After OK'ing the Properties dialog box, you can test everything right now to confirm that Firefox is now launching a window with tabs. Either:

  • Double-click the shortcut on the desktop
  • right click on taskbar icon pinned, click Mozilla Firefox

  Who do you want?

• Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

  Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

  Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

• Firfox does not load when I click the icon; Instead, I get a tab on the security. How can I get rid of the tab?

  I just loaded 10 Firefox. When I click the icon for Firefox, I get a tab at the top left of the screen, but the home page of Firefox is not running. The tab seems to deal with security, and among other things, I learn that my use of Firefox is not encrypted; I don't really like, all I want to do is axccess Firefox. How can I get rid of this dumb tab, and how to restore my access to Firefox?

  Also you can try using lightshot application, it works really good for me.
  Otherwise use PRNTSCREEN and paste with CTRL + V in paint application that accept that.
  You can also attach pictures like this: http://prntscr.com/6882h