Concerns about RAM

Similar Questions

• I need to be concerned about my MacBook Pro with the breech of security

  I need to be concerned about my MacBook

  Of security are what breach you referring?

• When I try to open a new window in incognito, a "File Index" window opens and shows everything on my hard drive. Concerned about security. What can I do?

  When I opened Firefox before the update, my home page was an address "file:///" and labeled "Index to the file. the window shows all my files hard drive with links to other files. Concerned about security, I contacted support where I was told that it may be malicious. They have cleared my cache and updated my operating system. When I updated Firefox and clicked on the icon for private browsing (mask icon) from the window of the file index showed once again. What should I do to prevent this?

  No problem, you have "file:///...". ' default homepage, example: If you write "file:///c:/". "can see all the files on your hard drive, you can change your default homepage in tools-> Options-> general menu of the Firefox

• About RAM compatibility...? HP Compaq Presario B2000

  Hello everyone,

  First of all please forgive me for my lameness...

  I have this old laptop that I use constantly up to now I have had NO problem/s which so than ever, except it requires upgrading memory, since it had 256 MB of memory when I bought it... I decided to update my ram at least 1 GB for my laptop to be more or less at par to the current requirements of modern software... Now my question is concerning the ram compatibility, I just wanted to ensure that the Rams are compatible since RAM DDR1 SODIMM are quite expensive compared to their DDR2 and DDR3 variants and once the Rams are purchased cannot be returned... more than info posted below...

  Laptop: COMPAQ Presario B2000 (model: REPLACEMENT-L07C)

  s/n: KRD43404JD

  p/n: PE972PA #AB0

  Service: B2028AP

  OS: Windows XP

  The only DDR1 SODIMM RAM available to my place where I live are:

  1. the TEAM Elite PC3200 DDR400 1 GB module

  2. TEAM Elite PC3200 DDR400 512 MB module

  Now my question:

  1 are those DDR1 PC3200 RAM compatible with the laptop?

  2. If these Rams are compatible should I expect (1module) 1 gb ddr400 or (2modules) 512 mb ddr400 RAM to achieve a system of 1 GB of ram?

  3. I know it sucks but where I am from RAM DDR1 SODIMM are kindda rare and very hard to find.

  Thank you that very very very much... and I hope to hear your words of wisdom... Thank you...

  You are the very welcome.

  Analytical result image has not yet passed censorship HP.

  I can't find anything on Crucial or Kingston of the site or the other, but I found this...

  http://www.upgradecomputermemory.com/RAM.cfm/memory/C/Compaq/Presario-notebook-memory/Presario-B-Series-notebook/Presario-B2000/

  It's showing that this notebook can take up to 2 GB of memory (2 x 1 GB PC-2700 memory).

  I don't know what to tell you. If it was me, I would buy only a single chip of 1 GB at a time to make sure it worked.

  This place says that their memory is also guaranteed to be compatible.

  Paul

• Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  Concerned about the compatibility and performance of i-Tunes if I install Windows 10 on my pc.  Can we predict what the problems are?  What solutions are there?  Thank you!

  ITunes 12.3 running on Windows 10 and it works great. Any questions or problems with it.

• (1) how to reset the task in view/default Access Manager? __2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  When I open the window (in Windows Vista) Task Manager, it shows that the "Applications" tab  I can access is more 'Processes', tab 'Performance' and 'Network'... this just started recently.
  (1) how to reset the task in view/default Access Manager?
  (2) how could it have been modified?-my firewall is off, too. I am concerned about safety.

  Double-click inside the border/edge to bring it back to the default view for Task Manager.

  Malware scan:

  Download, install, upgrade and scan with Malwarebytes to check / remove Malware/spyware.

  If necessary, do all of the above work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

   

   

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon. Mick Murphy - Microsoft partner

• Question about RAM

  Hi, I have question about ram because I'm so confused how this works.

  on my computer it says quad core and 6 GB of ram doesn't mean it all to combine them is 6 GB of ram? or each one is 6 GB?

  on my system config it says 6 GB so it means that each of them is 6 GB?

  and could you explain how to work this thing of hearts?

  Hello

  If your laptop is 6 GB of ram, it will mean that it is a 4 GB module in a slot and a 2 GB module in the other.  You can always refer to download and install the application at the link below.

  http://www.CPUID.com/softwares/CPU-z.html

  One time installed, launch the application, click the SPD tab and you will see the size of the memory card in the location selected in the drop-down list.

  More info on multi-core processors can be seen here.  Details in this regard are visible in the CPU tab on the above application.

  Kind regards

  DP - K

• Question about RAM CL

  Hi guys. I'm finalizing my PC build and I have a question about ram CL I can't find answers for hackers page here. http://ppbm7.com/index.php/news/planning?showall= & start = 3

  I would use these two RAM sticks for example.

  Module 240 pin DDR3-1333 transcend JetRam™ 8 GB High Performance: CL9, layer 6 circuit board

  Transcend JetRam™ High - Performance 8 GB DDR3-1600 240-Pin Module: CL11, 6 layer PCB, ultimate card stability and cross-platform compatibility

  My question is, what is the best for video editing? On the one hand we have 1333 mhz to with a CL of 9. On the other hand, we have RAM 1600 mhz faster, but at a higher CL of 11. Now, I'm not one to get caught up in the technical aspects as it may seem, but I don't understand so I can make decisions, especially when price is a factor. In this case however, they are at the same price...
  

  Well good for video editing, important criteria for RAM is:

  • Never, never crashes - it is very important; choose only RAM sticks (certified QVL) certified provider and do not use unmatched sticks
  • Speed; faster is better - while true also, past at the speed of the RAM, or lowering of the CASE wait cycles (latency) contribute to the speed, but the gains are very low; Faster RAM is hardly perceptible vs CPU speed more fast which is very sensitive (I played with it a lot on some versions overclock and test first with PPBM speed and speed up the processor 5% performance contributes to 5% where speed RAM about 30% can speed up about 1%)

  Google "what is the CASE for the RAM" and one week at self-teaching yourself if you want to even begin to really understand speed RAM! I know enough to know there is a lot to learn about the subject. The good news is that you don't need really to know a lot to build a reliable, excellent for running Adobe products, including the first, Photoshop and After Effects:

  • Use only RAM who has certified the seller of memory for your motherboard; do not assume that if the seller indicates a set 4x8Go of sticks that will work with your motherboard that two sets of such RAM will work with a card mother 8 locations either! (too late to discuss here, but various factors may override the controller memory in the processor itself - factors include voltage RAM, number of sticks, RAM clock, status of CASE of waiting settings speed, voltage of the cpu memory controller and maybe more)
  • Increasing the speed of the RAM always helps if slightly for first speed up to 1600 MHz (for x 79 in any case) and wins the speed of RAM which are still lighter

  Now, back to why both sets of sticks are the same cost. They most likely use the same chips of RAM, which is an important factor for what it costs to build the RAM sticks. While the Asus motherboard you buy allows full customization of many, many, many things, unless you are an extreme Overclocker and plan to spend a few weeks to fine-tune a new simple version you in the bios of motherboard and it say to use XMP settings. This indicates the motherboard, how to set the speed of the RAM and sticks of timings CASE for your particular RAM with the settings the seller intended.

  You really know a lot about what you are doing to set the timings RAM in any way other than the simple choice of XMP settings safely. And, you can easily burn your CPU if you don't know what you're doing and you choose some really bad parameters.

  Kind regards

  Jim

• A Question about RAM

  I have a computer Dell desktop Optiplex 990. According to the data sheet, the system is up to 16 GB of ram. I now have installed 8Gigs. If I replace and install two sticks total 20gigs 8gig, the motherboard uses the additional 4gigs or will they be wasted and unused or what. 4 X 3100 i5 running. Not sure about the motherboard. Any help appreciated.

  Hi cowboy Cactus

  Please write to us.

  The system has been tested to a maximum of 16 GB of RAM by Dell.

  There are opportunities to extend more that the limit of the system appears not and even if the positions he would not use the extra 4 GB of RAM.

  We provide system tag #, e-mail address and your name via private message, by clicking on my name in blue and then select send a private message

  Concerning

• Tecra R850 - 147 - Question about RAM

  Hello.
  What type RAM and SELLER od are installed on Toshiba Tecra R850 - 147 (Samsung? Kingston? OCZ? .... ? )

  concerning
  p.

  Remove the RAM cover and check which modules are inside. It is fixed with two screws.
  You don't need more than two minutes to know who is the manufacturer of RAM.
  In any case I think he'd be Hynix or Samsung.

• Satellite 3000 - X 4: Question about RAM upgrade

  Hi all

  I'm looking for more information on how to upgrade the RAM for my SATELLITE S3000 - X 4 (120 MB RAM, 14 GB HD I think!). Here's a little history...

  This laptop is about 5 years old, and I'm hoping to speed up a bit. I don't want to buy a new computer because she usually serves my needs.

  I emptied my hard drive files and unwanted programs. And I ran Jv16 Power Tools to clean the registry and minimize starts the process.

  It's always a little slow and if I am considering upgrading the RAM because I think I can do this for about £50. My questions are:

  What type of upgrade RAM should I look to buy? (This laptop have 2 RAM "plug-ins" or just one?)
  What is the size of RAM upgrade is the maximum an S3000 - X 4 could face?
  Could a novice like me to adapt to the style DIY upgrade?

  Thanks for any help you can offer!

  Gabrielle

  Hi Gabrielle

  He is old enough. I looked for some info, but unfortunately I n t have not found much. The device can use the 512 MB of RAM, and you can use 2 sticks of memory. I'm not 100% sure but I think you can use the module with tracking number PA3086U - 1. 25 M.

  The unit is not known to me but please check the underside. On most units, you can find coverage of memory.

• Satellite A350 - Question about RAM and Vista 32 bit - 64 bit

  I bought a Satellite A350 Tiger Direct. He moved with Windows Vista 32 bit.
  It is capable in my view up to 8 GB of Ram. Vista 32 bit does support 3.

  All reviews on this laptop online say that it came with 64-bit and 400 GB of memory.
  Mine came with only 230 GB of memory and 32 bit vista. I ran Belarc advisor, and he tells me that my computer is 64-bit ready.

  Is this true? Why is - this me came not with Vista 64 bit?
  I want to upgrade my ram but with 32 bits, which is not possible and according to Microsoft you cannot update 32-bit to 64-bit.
  So should I buy Vista 64-bit upgrade? (for around 300 euros!). Is this in any way about this?

  What are my options? I want 4 GB of Ram or more really bad...

  What Satellite A350 do you have exactly?

  AFAIK the most recent series of Toshiba laptop pre-installed a dual operating system;
  In this case, you can choose between Vista 32-bit or 64-bit.

  To obtain the 64-bit, you will need to restart the laptop and have to press F8.
  Here you must choose the option to fix my computer. Then select Toshiba HDD recovery and finally, you should see the option which would be you can toggle between the 32 and 64 bit.

  Usually the Vista 32 bit supports 3.2 GB RAM.
  Only the 64-bit Vista will be able to recognize 4 GB and more.

• Question about RAM for eMachines 633ids

  Hello

  Just bought an eMachines 633ids work today. The PC is old and it came with 64 MB of SDRAM. I have an eMachines broken T1742 with 128 MB of RAM. I was wondering if I could put the T1742 broken in the new 633ids RAM. It will work and is it safe? I don't know if RAM of the broken T1742 is good because the motherboard is shot. Do I just buy new RAM for the 633? If so I wouldn't mind putting money into it because it is in perfect condition. I paid $15 for it.

  Thank you.

  Don

  They wont even fit (see shears) the good news is the ram for 633ids (128 MB which is max) when you can find it (google it) is about $20

  

  

• My concerns about installing ESXi on a USB Flash Disk

  Hello!

  There was a lot of messages about installing esxi hypervisor on a usb flash drive, what I've done and I think it's ok because there's no need to waste expensive disks for installation of a very light bone

  But I have a few questions and concerns in this regard. appreciate your answers.

  1 - first of all I can't find my DL380 G7 Server internal usb. can someone give me a link or a picture where he is exactly?

  2 - Suppose that after boot completely the host, something happens on the usb drive. If nothing happens? I think there should be nothing to worry about, because the hypervisor has been loaded into the memory of the server. Am I wrong?

  3 - my concern is to have backup and the ability to restore that very quickly. some time in the past I had a single esxi host. I used powercli and commands appropriate for configuration backup host (I think that the command was something like esx-cfgbackup or like that).

  so if the flash has been corrupted, I would replace it with another and restored the settings that

  but now I host 4 esxi and vcenter. should I worry about this? How should I have backup? I know that SQL backup database of vcenter and its certificate is sufficient to have a backup of the settings of vcenter but on those who are just to vcenter and which are on the host? just want to say, what should I do to be able to replace a faulty usb disk (esxi is on it) with a new and all get back to work as it was?

  Sorry if the questions are easy to answer. I'm just a beginner

  and sorry for my bad English

  Assuming that I don't have the license for the host profiles, what should I do?

  It depends on the complexity of the configuration of the host. You can back up the configuration of the individual hosts or just reconfigure reinstalled once. In a larger environment, you'd probably for example the hosts scripted installation.

  Because the server vCenter Server usually runs as a virtual machine, it is a good idea to do an image based backup (using backup vDR or 3 rd-party applications), and - in the case where you use a dedicated SQL Server - certainly back up the database. For the backup and restoration of vCenter Server, you can also take a look at http://kb.vmware.com/kb/1023985.

  In the rare cases where an SD card fails, you can always vMotion virtual machines to another host and then reinstall the host with a new SD card.

  André

• Help with concerns about the billing of a customer

  Hi all, I'm about to upgrade my first customer site.

  I was wondering, as a premium partner, if I use the consolidated billing and my customer pays for one year.

  It seems that I charged British Colombia once per month.

  My concern is what happens if the dollar changes vs. United States dollar? If it loses value... I should take a markup to prevent this right?

  Another concern, do I charge GST and QST (I'm in Quebec, so are most customers aour.)

  can someone help me out here.

  Ive.d.

  Hello

  You will need to include the markup on your side for this.

  If need help more tender please support you more help.

  - http://helpx.adobe.com/contact.html?product=business-catalyst

  Kind regards

  -Sidney