Concurrent managers not to go after an upgrade to the 12.1.3 ebs 11i

Similar Questions

• I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just does

  I'm the original purchaser of Creative Suite Premium. Still, she meets my needs but will not re - install after I upgraded my box to win 10. Win 10 is not the problem, and my Adobe customer profile indicates that the product is registered. Adobe just doesn't let me activate it. Can you help me?

  If you're referring at the origin of Creative Suite (CS1) then this activation server was closed by Adobe a few years ago.

  The only way to re - install now is to download a new version without activation for CS2 (also applies to CS1 owners).

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Install, then enter the new, without activation serial number provided at this link (column next to the download link). Your existing serial number no longer works.

• Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. It's someone

  Hi, I just bought Adobe Acrobat Pro DC. I used the link that was sent to me to download. But the download was not successful. After trying 5 times, the system says, now I downloaded too many times and has refused to let me download it again. Someone from Adobe is reading this? How can I get this fixed a problem? Thank you.

  Download Acrobat products | Standard, Pro | DC, XI, X

• Can't change language after OS upgrade of the Sierra

  Hello world

  After the upgrade of the Sierra, my MacBook Pro has decided to return to the French.

  Now, I am unable to change the language on the menus and dialog boxes.

  I tried to put the English in language and text preferences, same problem.

  I also tried to run sudo languagesetup, same problem.

  Thanks for any help you can provide.

  See you soon!

  Language changes are not applied immediately to the running applications, but they should be applied to the applications that you start after the change is made. Changes to the Finder will apply if you raise, or to do it easily, just log out and back in.

  Log out and back in? Or restart your mac? If you didn't do it and let us know.

• Research of Stock from Adobe works not in all office since upgrading to the latest applications

  I get the error message ' sorry. something went wrong when searching actions from adobe. Please try again "."

  I run the latest applications of office which launched June 2016. At work long before new applications.

  I have run windows 10 on a hp G2 z book. I tried to disconnect and creative cloud back in. I rebooted my machine. Did not help.

  I can get the stock very good site and I can download comps in my libraries without any problem. It; s just that I can't find in in applications.

  Any ideas?

  Thank you

  Hi Bob,

  Have you tried to log out of the desktop application Adobe CC and then reconnect?

  That would synchronize the libraries.

  Hope that helps!

  Kind regards

  Sheena

• FB does not open on my iPad after my upgrade of the OS to 9.3.2 he starts to open but then returned to the screen.

  I just transferred most of my photos which prevented me to upgrade my OS. Now, the upgrade is complete (9.3.2) FB starts to open but then goes back to the desktop. Same thing for my YouVersion Bible. I thought maybe I could uninstall FB and reinstalling, but see how.

  To remove Facebook and YouVersion bible app, tap on and hold the icons (one at a time) until it wiggles. Then press the X in the upper right of the icon. Go to the App Store to install their return.

• Toshiba 32TL838: flicker after fw upgraded in the menus, using HDMI input

  Hello

  yesterday I updated firmware of my 32TL838 to version 6.4.0Y.1 / 94.6.27.8 using the upgrade feature network.

  After the upgrade, I reset the TV to start again with the factory settings.

  During the quick installation after the reset, I noticed a very bad video quality. The entire image flickered, had a ghost effect and looked at interlaced. The menus were almost illegible.

  Once the installation is complete, the TV switched TV (cable DTV) normal mode and at least the TV picture looked quite normal. While the input CABLE is selected, I can also open menus as before, they are displayed correctly.

  But as soon as I switch to the HDMI input, the image becomes nuts once again, just like during the initial installation, including recoveries of TV menu. Sometimes it becomes stable for maybe 30 seconds, but then he is paralyzed again.

  A few words about my setup: TV uses only input HDMI 1 and the cable entry, nothing else is connected.
  Links to HDMI input to a receiver Onkyo TX - SR508 AV which is powered by a Fantec 3DS4600 media player and the Blu - Ray BDP - S373 player.

  Because I expect the question of what-to-your-HDMI-wiring, I traded the HDMI cables but as expected which has not helped at all.

  At least, I seem to be successful by bypassing the problem when you use the Fantec drive.

  Before I updated the firmware, I was able to use the drive with 1080 p/60 Hz and the player has been installed as a result.

  Now I switched to 1080 p / 50 Hz, and the video image seems OK again. (However, I made a short test and as I said, sometimes_
  the image is OK for a short period).

  Unfortunately my BluRay player has no menu to change the frequency, so I watch BluRay or online services, the player offers, is impossible.

  So, what can I do now? A downgrade of firmware (if possible) would be a quick temporary workaround I could accept. But medium-term I'm expecting Toshiba to restore functionality that they promoted and for which I paid.
  (Youtube stopped working with the old firmware and it seems that 1080 p/60 Hz no longer works with the latest firmware).

  Anyone know how to downgrade the firmware using a USB? I already downloaded the previuos version tl838_853886.bin but I do not have a nail how (and if) it can be installed.

  Thanks for your advice
  BELEKTRO

  Hello

  As far as I know the isn t possible downgrade firmware.

  But you said that you noticed this problem by using an external device connected to the HDMI 1 port.
  As far as I know the Toshiba 32TL838 supports 4 HDMI ports.
  I recommend you to check all of the 4 HDMI ports as well as to check all device configuration options.

  Check for example the rate of active movement + option available.
  This option allows to improve the rate of cooling of a TV

• How can I keep a kid phone to get my personal iMessages, calls FaceTime and iCloud mail? He arrived after an upgrade of the system.

  Children of the iPhone 5 s. After a system upgrade, one of the phones began to receive my personal iMessages, FaceTime, Camera Roll calls. I use an iPhone 6Plus, but the problem occurred on the 5 s. I went into settings both of our phones and tried different things, can't remember now what I did, but it did not fix the problem. I'm sure it's something simple, but I can't understand it.

  You set them up with their own ID iCloud by using the sharing of family and not set up their device with your iCloud account.

• "the key to upgrade to an edition of windows does not work with Windows Anytime Upgrade" was the message received when you use the code comes to purchase Microsoft online. Any suggestions? »

  Upgrade Windows 7 Home Premium to professional.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• Xperia u is not turn on after trying to block the bootloader

  Hello
  a few hours back I tried to relock bootloader for xperia u with flashtool and after that I have cut my camera and when I press the power button / stop the phone will automatically flashmode and the green light of the bar light lights up for 10secs off goes but my phone market still not... I think that charging is completed and when I connect the charger again connects to flash mode and green light in the bar of illumuination...

  Other information. : when lock bootloader current im frozen bean 4.1.2 worn xperia P.. and now is not turn on
  Please help me!

  Subject published and proposed by Rickard

  Connect the phone to a wall charger > press and hold the power & volume 5 seconds > let it charge until the notification LED flashes in green, if you alread did, then repeat the process flashing again with a file different ftf

• ESXi host does not connect more after a restart of the service LogInsight

  Hello

  I put several (5.1 U1) ESXi to use the newly installed LogInsight. they sent him their event properly. I had to restart the log service Insight. After the reboot, the hosts stopped sending events. the vcenter continued, however.

  I had to reload the syslog on the hosts to send their event to the perspicacity of newspaper.

  esxcli system syslog reload

  any idea? I guess that's not normal behavior

  Thank you

  Eric

  Hi Eric, this is unfortunately expected behavior. What you are experiencing is a bug in ESXi. More information is available in the Guide to installation/Admin under the troubleshooting log Insight section or at the following article: http://kb.vmware.com/kb/2003127.

  ESXi newspapers stop arriving at the Insight Journal

  After you restart the log service Insight, ESXi hosts syslog messages stop arriving at the Insight Journal.

  Problem

  In Insight Journal configuration changes require that you restart the log Insight service. After the restart, syslog RSS of ESXi are no longer available.

  Cause

  Some versions of ESXi stop balls sending if connectivity to the remote syslog listener is stopped, even for a short moment. This problem affects the following versions of ESXi, depending on the communication protocol used.

• Is there a video from beginning to end on how to install a down loaded photoshop elements 13. First. I tried on you tube. I also followed the instructions and it will still not open upward after that is in the downloads folder.

  Is there a real tutorial video on how to install and download Photoshop elements first 13?  How to get it to open upwards after being download folder in the folder downloads on Windows 7 64 bit? I made the links as suggested and I still don't see where it says that.

  For Windows 7-4 4-bit. System.

  have you downloaded a 7z and an exe file?  That is to say, you should have two PES files in the same directory.  then, you double-click on the exe file.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• The slide show on the Web sites feature does not work since I've upgraded to the latest version of Firefox. Help?

  Since a recent update the slide show on some Internet sites feature for example babygooroo.com is no longer in effect. I tried to reinstall Firefox, but it does not solve the problem. I've updated all the ad - ons, but the problem persists.

  Get a script to update on their part in next https://getsatisfaction.com/slidedeck/topics/slidedeck_stopped_work_sudenly_with_firefox_for_no_reason