Conditions of installation of laboratory at home to study for VCP

Similar Questions

• How can I get my Installer windows genuine xp home emachines back for my 350 netbook edition ulcpc emachines return?

  Hello
  I bought emachines em 350 netbook of ASDA
  UK store on 2010.But, last October it had windows xp ulcpc house built on this edition.
  but I don't have the program installation and the OS at all in my netbook.
  It has been accidentally deleted. I live in Bangladesh at the moment.
  I want back the software. What can I do?
  KAZI MUNIR
  + 8801715990840

  eMachines 350
  Windows xp home edition ulcpc
  s / n: LUNA H0B0190205A0811601
  SNIDS: 02036876916

  You must contact your computer manufacturer for more information about restoring your netbook operating system.

• Help setting up a laboratory at home using Cisco kit and a blank Superhub

  

  Hello world

  I just started my CCENT class and so I try to create a laboratory that is separate from my LAN House, initially using a blank Superhub and a Cisco 1841 router.  Please keep in mind that I am a beginner, so it may not make sense or be completely illogical...

  The superhub for those who don't know, is a renamed netgear, limit VMDG480.  It's basically a cable modem and router wireless combined.

  The normal daily LAN side of the network was the default installation to receive an IP address via DHCP from the superhub in range 192.168.0.1/24.

  At first, I thought I could put things in preparation for my lab installation, by configuring the LAN subnet using 192.168.0.0 and superhub of/16 mask rank for my 'everyday' network and 192.168.1.0 rank for my "laboratory at home." (Good or bad?...)

  Unfortunately, I'm unable to do so because the superhub only allows the last byte in the mask to be changed, so I changed the mask and it now reads 255.255.255.128, with the idea that I can always have 2 separate networks.

  In the photo above you can see devices on the right side are all directly related to the superhub and continue to work as usual.

  On the left side is where I've implemented a Cisco 1841 router and a laptop computer to test.

  The details of each device are;

  Blank Superhub
  LAN:192.168.0.1
  The DHCP scope: 192.168.0.2 - 192.168.0.126

  Cisco 1841
  Fast Ethernet 0/1: 192.168.0.126
  255.255.255.128

  Fast Ethernet 0/0: 192.168.0.129
  255.255.255.128

  PC2 (mobile wired connected to FE 0/0)
  IP: 192.168.0.200
  255.255.255.128
  Default gateway: 192.168.0.126 (the address IP of Cisco 1841)

  Someone would be kind enough to look at this and tell me where I'm wrong please?

  I thought about pulling the superhub completely, but I am bound to her by my ISP :(

  Hello

  It of a little early in your studies for this :) but implementation of your knees it should work:

  1841 router:

  int fa0/0 (interface connected to the hub)
  IP 192.168.0.126 255.255.255.0
  NAT outside IP
  No tap

  int fa0/1.2
  encapsulaton dot1q 2
  IP 172.16.0.1 255.255.0.0
  IP nat inside
  No tap

  int fa0/1 (interface connected to)
  No tap

  NAT configuration:

  access-list 1 permit 172.16.0.0 0.0.255.255
  IP nat inside source list 1 interface fa0/0 overload

  Add a default route:
  IP route 0.0.0.0 0.0.0.0 192.168.0.1 (so your router knows where to forward DNS queries to 8.8.8.8)

  Connect your 3560 to the second port on the router and configure a trunk on the switch port and add vlan 2:

  int fa0/0 (connected to the 1841 router)
  switch to trunk encapsulation dot1q
  mode trunk switch

  VLAN 2
  name Home_Lab

  Connect your PC to the second switchport and add vlan2:

  int fa0/1
  access mode switch
  access switch vlan 2
  No tap

  Finally, give your PC an address in the subnet of vlan 2:

  IP: 172.16.0.2
  Mask: 255.255.0.0
  Gateway: 172.16.0.1
  DNS: 8.8.8.8

  You should be able to ping the address of the router on the subnet in 172.16.x.x 192.x.x.x. I don't have a Virgin hub to test this, but it worked well with two 1841 routers.

• Problem with server Supermicro laboratory at home, ESXi sets in not as server restarts always

  Dear community,

  I'm having a problem that makes me nuts and I was wondering if you can help me with this.

  While trying to set up a laboratory at home (I think it's often referred to a "white box" system)? I don't get the operational ESXi installation. For three days, I was not able to install ESXi.

  Problem:

  ESXi 5.5U3 installation fails and immediately restarts the host until it starts doing anything... specific.

  Using IPMI my motherboard I recorded (and also attached) a video and tried to integrate it here:

  In case you don't see it please look at the attachment.

  For those who do not see the host starts and begins to extract the files in memory. When he goes to the grey-yellow screen it shows the following lines and then - BOOM - restarts the host and it again:

  Initialization of the moment...

  Initializing Scheduler...

  Initializing power management...

  the user successfully loaded.

  RESET

  I tried several options, such as the boot via USB, both internally and externally, to change between USB 2.0 or 3.0 port or IPMI ISO loading but nothing, all this goes down with the same problem or even f * cks up to my output video when you attach a file ISO storage KVM. Disabling USB legacy support also solves nothing and even had to reset the BIOS thereafter. Also to make sure that it is not related to the RAM, I changed the memory and tried with 8 or 16 GB or 32 GB full and also tried different banks, no change.

  It is the material that I use:

  • Supermicro X10SLL-F
  • Kit of UDUMM 240-pin ECC Kingston 32 GB (4 x 8 GB)
  • be quiet 400W power
  • SATA 250 GB HARD drive (or without)
  • Lexar 8 GB USB stick (formatted with Rufus) / anonymous 4 GB USB Stick

  As described above, nothing I tried quite fix it and I start to feel the distress of one.) "(ne pas pouvoir continuer et b.)" After spending a lot of money on things that don't work (and I'd rather not things).

  I know that, currently, this motherboard is not himself but factually have seen several blog posts of people who use this motherboard with success. Why am I the only one who can not do?

  Oh any by the way, the ESXi version is this: VMware-VMvisor-Installer - 5.5.0.update03 - 3116895.x86_64.iso

  I hope that someone out there is able to help me.

  Thank you in advance for your help!

  Believe it or not, it was the power supply.

  All those who try and random restarts as beds me days were due to the poor being quiet power, hopefully, at some point this will help everyone.

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Preparation of an installation of Windows XP Home edition CD with a MINIMUM required drivers for A200-1AX

  Greetings,

  I am trying to install Windows XP Home edition on my old days by Satellite A200-1AX. Today, I tried to boot from the CD of Windows XP Home edition or after the copy of the system files, the laptop produces the error that Setup did not find any hard disk during the Installation of Windows XP. I looked on the internet and found the following page:

  http://www.howtogeek.com/HOWTO/Windows/resolving-Setup-did-not-find-any-hard-disk-drives-during-Windows-XP-installation/

  Explains how to resolve this problem. So I try to make my own installation CD of Windows XP Home edition with the necessary drivers. My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running? It is not necessary to install the drivers for all the A200-1AX since the first installation of XP, I can always go back and install those remaining of the XP; but I don't want the installation process interrupted due to a missing driver where I have to repeat the process of manufacturing more install of WXP CD custom. The list of drivers and devices provided by Toshiba is too long to write on a single installation with XP CD.

  My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?

  Thanks in advance for your answer.

  Best regards, Ashraf.

  > My first question is: what are the minimum required drivers to ensure a smooth installation process until I get the XP running

  You will need to include only the Intel Matrix Storage Manger for the XP CD again. Without this iMSM XP will not see the HARD drive
  This driver is important. Other drivers can be installed after the installation of XP!

  > My second question is: there is an update of the bios/firmware required in accordance with the instruction list. Is it necessary BEFORE or AFTER the installation of Windows XP Home edition?

  There are 2 versions of BIOS; One for Vista and one for XP. Generally, the update of the BIOS must be made before the instillation of OS but you can also try to do after installing XP. In both cases, the update of the BIOS would be possible.

  > If I decide to go back to VISTA using the recovery CD, I must restore the bios/firmware?
  Generally, Yes! Without the good BIOS features like the FN buttons could not work properly!

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium?

  How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium? Can I move the program files or do I have to reinstall each program with the cd that came with the applicable programs? I know how to move all the other files. I do not know how to move the program files. Thank you in advance for help you.

  You can't move programs from Windows.OLD.  The programs need to be reinstalled.

  Sorry, but that's how.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• CASE Installation problem on vista Home premium OS

  Hi guys,.

  I am facing the CAS(OCcas11.1.0-win64.exe) Installation issue on vista Home premium OS.

  The error I see is: "Check that you have specified the username and password correctly and the user has rights"logon as service""

  can you please suggest me how to bypass it and install it in vista home premiem OS.

  Thank you

  Hello

  You have created a user for the services of short?

  If this isn't the case, you must perform the services short as a specified user for which you can control permissions.

  Follow thw below doc for this step:

  https://docs.Oracle.com/CD/E55325_01/CAs.110/PDF/CASInstallGuide.PDF

  If you use your credentials to the system for this step, or you forgot credentials, then follow the below steps.

  Open Services' of all the Programs/Run.

  Right click on short service (CASE, HTTP, Tools) and got to properties.

  There, click on "Log On" tab and change the identification information; Restart all services.

  Most likely your change of tools and Framework service credentil will solve your problem

  Kind regards

  Prateek Gupta

• Question of laboratory network home

  I recently acquired a couple of HP DL360 G4s and a NAS I think to support NFS and want to set up a laboratory at home using ESXi 4.1. I also acquired a couple of NIC dual port to add to the servers for additional physical network adapters. I'm a bit confused on the side network, I do not have a GBit 8 port switch I could connect all this, but it is unmanaged and that means no configuration of VLAN. How can I make this work if I want to put the SIN in NFS on my network with internet access?

  Any help would be greatly appreciated

  .. Since I have a switch and can not do VLAN for the time being, I have several uplinks on the standard vSwitch connected to the same subnet?

  As long as you use the 'Road' default vSwitch strategy based on the source port id, it should work.

  André

• Need advice with a laboratory at home

  What is your opinion with this laboratory to the House vSphere: 2 servers with 16 or 32 GB of RAM from Newegg or Amazon PowerEdge T110 II (Xeon 1230 v2 w/3 NIC) Dell (Dell RAM is of $$), switch (Cisco SG300) managed gigabit, box of i3 intel not expensive with 3 or 4 discs running openfiler or Freenas for storage and a UPS am I missing something? I don't want to build a white box and don't want a RAID controller (for now). Thanks for your advice. (I'm studying for my VCP)

  Welcome to the community,

  If the purpose of this study, I would not even spend a lot of money on server hardware, but try to have a decent PC (e.g. I7 CPU, 16 + GB RAM, SSD and HARD disk) and build a virtual lab with which you will have a much better flexibility in what you have installed. For example look at building the ultimate vSphere lab to see if this might be an option for you.

  André

• Vista Home Premium Recovery for Acer Aspire?

  original title: find "Vista Home Premium Recovery for Acer Aspire?" question on this forum

  I posted my question (see title) today and got a response. Thanks for the reply by email, but I would like to react on this thread in the forum and I can't find my question, let alone the thread. Is this possible with this site? If so, how?

  Hello

  What version of Vista you have? Backup routines are different for the different versions.

  How to make a backup of the files with the option automatic backups in Vista
  http://www.Vistax64.com/tutorials/100133-backup-files.html

  How to restore files backed up in Vista
  http://www.Vistax64.com/tutorials/100253-restore-backup-files.html

  If Windows Vista professional, comprehensive and company:

  Use complete PC Backup and Restore utility Vista http://www.bleepingcomputer.com/tutorials/tutorial145.html

  How to restore the complete computer from a complete backup and restore Image in Vista
  http://www.Vistax64.com/tutorials/99718-restore-complete-computer.html

  =======================================

  I prefer for the most of backup data and prefer to do it in a way that makes it easy to find and
  a restoration as well as many file. You can also burn an image of your installation from time to time to be
  able to get restored programs and then use the backups to replace the data.

  Replicator - free - excellent backup tool for backing up the data
  http://www.KarenWare.com/PowerTools/ptreplicator.asp

  ImageBurn - free
  http://www.ImgBurn.com/

  How to make a backup of your data
  http://www.vista4beginners.com/how-to-backup-your-data

  GFI Backup 2009 Home Edition - an alternative to the backup and Restore Center
  http://www.vista4beginners.com/GFI-backup-2009-Home-Edition-review

  =======================================================

  Other methods for the most extreme cases.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.

• Hi, I would like to know if is better to stop a macbook pro or left in sleep, when doing small journeys, from home to studio for example or to let in mode 'sleep'... Thank you

  Hi, I would like to know if is better to stop a macbook pro or left in sleep, when doing small journeys, from home to studio for example or to let in mode 'sleep'... Thank you

  You can arrest him or let him sleep.

  Mac with SSD in it, it's although it is.

• I have a Sony vaio laptop, model # VPCEA36FA, I know the HOME STATION support for this model

  I have a Sony vaio laptop, model # VPCEA36FA, I know the HOME STATION support for this model

  Hello

  Targus USB 2.0 Docking Station model # ACP51USZ is compatible for the computers of the series E I have provided general information.

  For more information about how to contact a Sony centre in another country, please visit the following site:

  https://www.Sony-Asia.com/section/contactus

  If my post answered your question, please mark it as an "accepted Solution".

• IDEAPAD Z580 - Dolby Home Theater v4 for 'Windows 8' 64-Bit

  Where can I get Dolby Home Theater v4 for Windows 8 64-bit?

  In the driver package...

  After unpacking... in the pilots appear is dolder for Dolby home v4 t.