How to move Windows program from Windows.old files after you do a re-installation of my Vista Home Premium?

Similar Questions

• After you have installed the free updates for Vista Home Premium 64 bit, Windows will not start

  After that I installed the free updates to service pack 1, the system goes through 2 of the 3 steps, while it recharges, then the system does not boot?  To get the computer to work again, I need to run the repairer of Windows, which allows you to restore the system to an earlier point?  Does anyone have an idea how to fix this?

  Do your system restore, then:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon.

  Mick Murphy - Microsoft partner

• Is it safe to delete Windows.old files after doing a system restore?

  I would like to know if it is safe to delete Windows.old files after doing a system restore. I did two restorations system in a year or two, and I have two files labeled "Windows.old" and "Windows.old.000" which are just take a lot of space on my computer. I heard that it is safe to remove them, but only if some files are copied correctly. How do you know if those files are copied on?

  Thank you!

  Hello

  It is safe to delete

  but get your data off it 1 if necessary

  you are the one who has to decide if you have recovered your data from the windows.old folder, until you remove

  Here's how to recover data from it

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  and here's how to remove

  http://www.Vistax64.com/tutorials/240390-Windows-old-folder-delete.html

• How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat?

  How to configure Adobe Reader to the default program to read PDF files after you install Adobe Acrobat? I have a few other programs that need to use Adobe Reader showing 'photo' that are PDF files, and after the installation of Acrobat, it is Acrobat that opens automatically, with a message whenever Acrobat cannot be used for this and will be closed, and then the Player opens. I don't like having to see this message every time... Thank you! :-)

  Hi anne-grethea26777033,.

  You can do CD player as your default application by browsing in Edition > Preferences > under categories, select the "Général" and at the bottom of the window, you must select an option which reads "set as default PDF Manager" under the label of startup application and click OK.

  

  Let us know if that helps.

  Concerning

  Sarojini

• How to delete windows.old files

  Hello, I recently bought a laptop Acer Aspire 5536 with Vista and I have upgraded to Windows 7 Ultimate 64 bit
  because I did not format first I find myself with windows.old files, I have manged to remove the program files from windows.old in taking possession, but I can not delete the folder windows.old itself, I've seen some sugestions to do a disk cleanup but this does not work for me because I see not the windows.old file
  does anyone know of a way to delete windows.old please until I do a format?
  Thank you.

  Hi all

  Try cleaning disc, select the C drive, then click on file system cleanup, select C drive once more and then you will find the windows installation previous option. It worked for me... hope you.

• Problems with windows update, run sfc/scannow and boot into safe mode. (Vista Home Premium)

  Hi all

  Please bear with me here that I try to explain all the questions I have with my computer right now. I'll try to explain everything that self-organization as possible, but if you need more information or file papers to provide a solution more precise, do it me know.

  To start, I use a HP Pavilion dv6000 series (dv6748us to be exact) with Windows Vista Home Premium (32 bit) installed. (Service pack 2). About 6 months ago I got this laptop from what I believe was the conflicker virus (kept forwarding pages, arrested updates and antivirus programs, etc.) and I managed to get Windows Update works again. My help and Support did not work well, it only worked in Mode without failure, so I did some research and tried a bunch of suggested corrections (update the registry, etc.) and got it work yet once again. I don't know if one of the tools that I used all by setting the Help & Support could have caused problems that I now (as I literally tried everything under the Sun until I got to work), but my Windows Update does not work properly again.

  A few weeks ago, I installed some updates and restarted the computer, but updates did not finish install on reboot. He said the usual "Configuring Updates, do not turn off your computer", but never showed percentage complete or whatever it is. It restarted, and when I open Windows Update, he said the last time I checked the updates has never been (obviously not true), and when I tried to check the updates, it jumped right to the message telling me I have to restart my computer to complete the installation of updates. She continues to do everytime I open Windows Update. From time to time, I try to restart it, just to see if it will work, and he never does.

  I spent hours trying all the solutions I could find in Google. I tried to run system update readiness tool, which seemed to run correctly (but does not solve the problem). I then tried the difficulty it for Windows Update, and it does not solve the problem. (It might be important for me to mention that I also have problems with the difficulty It Center itself, too. Individual tools like that for Windows Update is running, but the difficulty It Center program keeps giving me the error message that "a problem is preventing the troubleshooting tool to start.") I also tried to rename the pending.xml file, and then later I deleted it, after reading in another forum that you rename the file could cause system instabillity or something like that.

  Unfortunately, I can't use system restore to solve all my problems, because all my previous restore points have disappeared (I don't know if the virus wiped out them, or if the computer removed on its own) but restore points only I checked are those that have been created recently, during the time I had these problems.

  I tried running sfc/scannow nothing helped, as he continues to tell me that there is a pending repair, but repair pending never ends. I tried to use the command of /revertpendingactions of dism.exe/image:C\/cleanup-image in the command prompt of recovery center to stop it pending repairs, and that has not worked because it claims that dism.exe that does not exist / is not a valid command. No matter what I try, I can't have this pending repair or my updates to complete pending.

  I tried to boot mode safe several times as well and he hung up on crcdisk.sys when starting every time.

  Being that I can't use sfc/scannow, System Restore, or get into Safe Mode, I'm really lost as to what I should do next. I'm honestly not sure if the problems are related, but I just thought it would make sense to list them all in one place.

  Please note that I don't want to re - install Windows Vista, or don't I think I need, because the computer works very well for most. (I use it for typing this right now). I had much rather bring all the features on mine, which I believe can be achieved with the help of the right person.

  If someone could provide me with suggestions/solutions, it would be greatly appreciated! Certainly, it would relieve a lot of stress for me!

  DISM is a thing of Windows 7. First test the hardware.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.

   

  SFC

  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  sfc/scannow

   

  Heat

  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.

   

  For memory diagnostic results

  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   

  Double-click the entry for more details on this entry.

  For results of Chkdsk

  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  
  Look for EventID is 52 and Source disk
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

• Windows cannot find any networks, but Ubuntu can! (X 32 Vista Home Premium)

  I recently replaced a faulty laptop computer mother board with an identical model (only difference is a newer version of the BIOS). After restarting Windows (Vista Home Premium 32 bit) I can't find the networks wireless where I can see usually eight networks at least an unsecured connection, but now I get nothing.

  I replaced the wireless card Atheros with an Intel Pro 3945ABG driver and installed the latest version and that I still get the same error "Windows cannot find any networks", I can get access to the internet via an Ethernet cable but I am unable to connect wirelessly. If I try to manually configure the wireless connection, I get "unexpected error occurred".

  I started the system from a CD of Ubuntu to check that it was not a hardware problem. Wireless card perfectly, sees all the networks, connects and works very well.

  It seems that something inside Vista has failed since even change the wireless adapter for a different manufacturer and the results of the modeling in the same error, pointers?

  Kind regards

  Jason.

  SOLVED

  It turns out that Kaspersky Internet Security is at fault and he was very happy to work via ethernet it had mutilated all WLAN connections.

  Removal of Kaspersky and all of a sudden all the wireless networks have re-emerged.

  Kind regards
  Jason.

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• How to activate the faults COMMITTED to an internal SATA hard drive, but not the other, on Vista Home Premium 32-bit?

  I have a set of 17-inch laptop 2008 which contains two hard drive bays internal, purchased in June.  It came with a single hard drive (traditional spinning disc).  It is running Service Pack 2, Windows Vista Home Premium 32-bit.

  My SATA controller is an Intel 82801GBM/GHM (ICH7-M family); I think it's a first-generation SATA controller (1.5 Gbps).

  I received recently a 160 GB Intel X - 25 M SSD (second generation SATA, but it is fully compatible with the first generation controllers, without additional or jumpers configuration) as a gift from my wife.  I removed my first hard drive completely, installed the SSD in the main Bay and installed Windows, drivers and the Intel SSD utility.  I then reinstalled my HDD original in the second span, completely wiped and reformatted it as a partition; It currently contains my music and other multimedia files.

  The utility Intel SSD tells me I should activate DIPM for my SSD as opposed to HIPM.  This seems to take a bit of tinkering to make Vista, and my situation is further complicated by the presence of my HARD drive (original) secondary, which prefer to use HIPM.

  I read the article on the Microsoft Web site on editing the registry to activate the misconduct, and it's something I would feel comfortable doing. However, I don't want my SSD to use DIPM, my HARD drive is expected to continue to use HIPM, and I was afraid that the proposed fix would allow the misconduct for all readers.

  Could someone let me know how I can activate DIPM for my SSD while continuing to use HIPM to my HARD drive, I'd be very grateful.

  EDIT: My Maintenance of SSD utility said simply that the State of the settings DIPM/HIPM "could not be determined." if Vista automatically selects the correct setting and the SSD utility does not just understand that, which makes my life a lot easier. but it would be nice to know for sure, so I can forget it all (if Vista already defined for me) or change the setting (if Vista did not automatically choose food appropriate for each disk management mode).

  You will need two SATA controllers: both on board or an edge and the other on PCI - E.

  Configure one who does not need TRIM/DIPM (do not use a SSD) as non-AHCI (compatible IDE/ATA-6) in the BIOS and the other (where TRIM/DIPM will be used) as AHCI.

  Connect the drive to which you DIPM AHCI controller. See http://www.abxzone.com/forums/f155/tip-how-enable-dipm-ssds-windows-120968.html for more information.

• Please can someone remind me how to move my favorites from my old computer to my new computer?

  switching from Windows XP to Windows 7

  Bookmarks > show all bookmarks-> import and backup - Export HTML... - on a USB
  
  then
  
  Bookmarks > show all bookmarks-> import and backup files on this USB - import HTML... -

• How to change or choose the color of the LED on my XPS 630 façade? Vista Home Premium w / Aero

  I know they are there so I can check them in work and in diagnostic mode.

  I know they are there so I can check them in work and in diagnostic mode.

  Hey edgewarp

  looking for a manual to the website of dell for your model below

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  and or ask in the forums of dell support, if possible

  http://en.community.Dell.com/support-forums/default.aspx

  Walter, the time zone traveller

• restoration of old files after the clean installation of Vista Windows__

  How can I restore old files after you perform a clean installation of Windows Vista

  If you have an installation clean back to factory settings, you normally wiped your hard drive clean during the process.

  You can try this program:

  http://www.SnapFiles.com/get/Recuva.html

  Recuva is a file undeletion tool that allows you to analyze your hard drives or media cards for files that have been deleted or formatted. It presents you a list of files that have been found, as well as an assessment of their potential for recovery, a preview option, and a hex viewer to inspect the content. You can limit your search to files of a certain type (e.g. images, audio etc.) and choose between a quick and a thorough analysis approach. The program also includes a secure deletion option that allows you to permanently delete files that were found while parsing, to avoid any future recoveries.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Find a windows.old folder, because we don't know exactly how you have installed.

  http://support.Microsoft.com/kb/933209

  How to recover files from an earlier version of Windows in Windows Vista

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If none of the above solves your problem, try data recovery companies.

  Be warned: they are $$$

  See you soon. Mick Murphy - Microsoft partner

• When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  When I shut down windows end progra - sample appears and windows will not be stopped, unless I click for end of program. Eny one have an idea how to stop this program from running?

  Then, you will need to request Support Intel if the drivers you downloaded were appropriate for your hardware and Windows XP.

• Windows.Old file

  I have reinstall my pc. I found out about windows.old file after. It occupies a lot of space (19 + GB). is it safe to delete them? or will it hurt on my reinstalled windows 7 HP Touchsmart 310? Thank you

  Hello:

  It is perfectly safe to delete, but check once more that you can keep all the files.

  You can easily get rid of the windows.old file (once check you it again once you may have forgotten to back up all the files), by launching the disk cleanup utility and click the button files system at the bottom left of the window cleaning disc cleaning.

  When it's done to calculate, you will see the folder windows.old in the list of files - you can remove. Check that and it will be gone.

  Then run disk defragment tool to compact disc because there is a huge 'hole' where was the windows.old folder.

• Can I use Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users) to install Windows 7 Edition home premium 64 on a desktop computer running the OEM version of Windows Vista Home Premium 32?

  My desktop system is an Acer E700 Intel Quad Core 2.4 GHz with 4 GB of RAM and 1 Gig video running Vista Home Premium OEM 32 version. I plan to upgrade the hard disk of 1 tetrabyte before upgrading the OS.  If so, how should I do this?  I have to restore the backup to disk to the new disk before update for Window 7 64?

  My second office is already running Vista Home Premium 64 so this upgrade using the family must be right before correct?  Or do I need to backup to the subject programs before moving to Win7 64?

  Thanks in advance.

  You will need to do a reformat to perform installation and you reinstall the applications.  There has never been a way to upgrade from x 86 to x 64.  You will need to do is use your x 64 media to install Windows 7 on new hard drive, use your product key on the certificate of authenticity located on the side of the Acer desktop computer.  You will always be the OEM license terms, as you install the same Windows SKU.  Product keys are interchangeable between x 86 and x 64, but you will probably need to call to activate Windows after installation - usually the Internet activation does not work on current versions of Windows using the seller great modes of action.