Conection WiFi from pc to printer

Similar Questions

• Is, mi Iphone 4S dejo funcionar el wifi from una las plots. El boton Quebec city lights el esta como auto wifi y no me permite encenderlo. Restableci las redes y el telefono pero the falla continued. Someone can help me?

  Is, mi Iphone 4S dejo funcionar el wifi from una las plots. El boton Quebec city lights el esta como auto wifi y no me permite encenderlo. Restableci las redes y el telefono pero the falla continued. Someone can help me? Gracias

  Hello! Gracias por publicar in las Soporte communities of the Apple. Hemos lanzado una nueva Comunidad of Apple support in Spanish. If you interesa participar, registrate, encuentra una respuesta o publica una pregunta sober los productos y servicios of Apple that mas you interesen. Haz click in este enlacepara el sitio en Español visit.

• Where can I find my wifi for my HP-Print-94-Deskjet2540 password

  Where can I find the password for wifi for my HP-Print-94-Deskjet2540 series?

  Hello

  On the printer control panel, press the HP direct wireless icon () for 3 seconds.

  Pritned report contains Direct wireless security code.

  Kind regards

  Shlomi

• Report is sent to the printer, but disappears from q without printing printing

  Nothing prints from my connected printer.  Goes to print q, but then disappears.  If I send the report to my wireless printer, it prints very well.

  What version of Windows you have installed?

  Try to uninstall the printer and then reinsert.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Microsoft.com/kb/308028

• Conection lost to esp5200 kodak printer signal is excellent and still high tower failed to connect.

  can't conect printer

  conection lost to esp5200 kodak printer signal is excellent and still lap top cant conect

  Hi FrancesFlores,

  ·         What operating system is installed on your computer?

  ·         What happens when you try to connect to the printer? You receive an error message or error code?

  ·         Did you do changes on the computer before the show?

  Please answer the following questions so that we offer in addition to the steps to solve the problem of troubleshooting.

  During this time, you can consult the following articles and check.

  Install a printer on a home network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

   

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows7/share-a-printer

   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Hope this information helps.

• My garden of Image with windows using 10 to scan from a canon printer mg5450

  I'm trying to use my kindergarten picture using windows 10 to scan from a canon printer mg5450 but I get mg5400 in my selection of scan and my printer is not recognized. Just downloaded and installed mp68-victory-mg5400-1_01-YES.

  Any suggestions please

  Re, I installed the drivers and it is now correctly works thanks

• Photosmart 7150 cut 20 pixels from the edges printing borderless

  How a Photosmart 7150 cut 20 pixels from the edges printed everything without margin (low is only 15 pixels) using 4 by 6 in the document with tab?  Image was created in Photoshop CS3 on a PC running Windows 7 Ultimate 64 with the latest drivers from the HP site (Vista 64 more patch Windows 7).

  This is normal, the MECHANIZATION of the printer printing slightly to make sure there are no white borgers due to misalignment of paper.  You can possibly reduce the overspray by going to the settings of the printer, Advanced and adjust the overspray to the minimum.

• After installing SP2 for Vista, everything that I try to print from this computer prints in poster format.

  After installing SP2 for Vista, everything that I try to print from this computer prints in format post little matter what I tell the printer to do.  I use a laptop Acer Aspire 9410, 32-bit, Windows Vista, IE 8.  Commands from another computer on the printer work properly.  Should I uninstall SP 2 & reinstall?  Or what is the best fix for the problem?  Thank you.

  shagen18,
  You need to uninstall the printer and make sure you have the latest drivers from the manufacturer of the printer and then reinstall the pritner.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to download pictures from camera to printer on a HP4622

  I bought a HP4622 and now I can find no way to download photos from a camera to the printer. Is it possible to do it on the printer?

  Thank you

  Hello aerospecs,

  He is not a player card or a USB port on your printer, there is no way to 'download pictures from camera to printer '.

  You need to look at your camera and see if there is a way to download images from the camera to the computer, usually done with a mini USB cable.

  You can always buy a card reader to connect to your computer and download from your card directly to the computer, and then print photos from your computer.  You can buy these card readers for less than $20 of Wal Mart to Best Buy and many shops in the meantime.

  I hope this helps.

  Good luck!

• Printing from iphone to printer no wifi

  Is it possible to print from my iphone 6 to a printer that is not able WiFi?

  None

  you need a printer that supports AIR-PRINT

  not only a wi - fi connection.

  On AirPrint - Apple Support

• I'm trying to print via wifi from my IPad to a 709n 6500 printer all in one

  I downloaded the HP sprint app on my I Pad, but it does not see my wireless 6500 printer 709n all-in-one. The HP web page indicates that the printer is compatible. Thank you

  We will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you don't know what this range, change the last digits of the IP address of the printer after the last '.' to 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• I followed all of the instructions of troubleshooting Apple AirPrint from HP. Printer still does not print.

  Using a HP Photosmart Plus B210a printer, I tried to print pictures and emails from my iPhone 4 via the WIFI interface.  My router is a Motorola SURFBoard SBG6580.  All connections were tested and verified working.  The printer is displayed on my iPhone as active, and following my directive to print messages indicate 'contact', 'preparation' and 'printing 1 of 2', etc.  Then nothing.  No printing.  I followed the instructions in the HP troubleshooting for "Apple AirPrint: The Apple Mobile device shows a Job is printing but the printer does not Print", without success.  I am able to print from my HP Pavilion Entertainment PC with Windows 7 using the same interface WIFI without problem.

  The Motorola router is a recent addition to my system.  My unsuccessful resolution of this problem has been to publish a message to see if anyone else following HP Quick has addressed this problem.  Thanks for your comments.

  An additional step that you could try to do is to do a hard reset on the iPhone. Make sure you that if you have something open that has not been saved first record you these items.

  Hold power and home together for 15 seconds button. You can see slide to turn off the screen lights up but ignore that and continue at length on the keys until the unit turns off. Depending on the exact model unit may automatically turn on when let you go and show the apple logo, or you have to manually turn it back on with the power button.

  After the device upward charge, try printing again.

• iPhone does not remember network wifi from 10.0.2 upgrade

  Hi, I have an iphone with OS 10.0.2 5s (A 14, 456). Given that I have updated to version 10 my phone does not remember the hidden network (hidden ssid, security wpa2, no proxy, without filter mac or anything special) at work. The AP is a Cisco Aironet 2602i works correctly for others (with iphones with os 10 and other phones/computers as well) and this worked well for me before the update. If I add once again the network by entering the name and password that it connects without any problem and works fine until I have disconnect or leaving the office. Once I disconnected or run out of reach and restart the connection (manual connect or just getting back to the beach) the network is no longer there as it never existed then I have to start the whole process from the beginning, if I want to use wifi.

  I have tried of course to restart the phone and add the network and remove it while I was connected and then add again, but so far nothing works.

  It is something he does not automatically connect, but because he forgets all the information I need to type again and again is quite annoying. Y at - there someone out there who could give advice what could be the problem and how to solve?

  Thank you!

  Hi Sircsak,

  All you have to do is reset the network settings.

  Go to settings > general > reset > reset network settings

  Finally, add your network.

  This should solve the problem.

  See you soon!

• Connection app to print via wifi Android Tablet for printer HP Officejet 5740

  I have trouble getting the application "All in one remote control HP" to recognize my printer when connected via wifi. I have no trouble getting the 'HP eprint' app to work. I want to use the previous application as it scans and prints. Also how to print wireless an article on the web when you use Google's browser or even save it to a download to print later. I'm old so need help please

  Cariad says:
  

  Yes. He says DIRECT then the name of the printer

  Hello

  Yes, that means that it is there, is it connected ? If not, you need to set up to enter a pin code which is located on the printer control panel.

  Kind regards.

• HP LaserJet MFP M127fw Pro: Cannot edit or delete misspelled E-mail from screen touchscreen printer scanning for Email application

  Cannot change or remove the screen touchscreen printer in scan email wrong spelled the Email application:

  During the scan to e-mail setup, the e-mail address was misspelled.  Due to the fault of strike, the e-mail cannot be modified or changed because it asks to enter a PIN that comes up as incorrect.  When I click on I forgot pin, it sends the PIN code of the e-mail account misspelled that I can't access.  How this incorrect email account can be deleted?

  Hello

  Press configuration icon, and then select Web Services from the menu.

  Select Delete Web Services and validate.

  Now add the Scan to the Email application in the Apps section and register using your correct email address.

  Note: you may need to select another address of HP ePrint, if you use the HP ePrint feature.

  Shlomi