Conexant - Audio - Conexant high definition SmartAudo 221 problem!

I have a HP Pavilion dv6000 and my sound worked fine for a few years until now when I turn it on it says "no audio output device is installed" Please help me... My friends HP laptop also has the same thing then it's an update that maybe? I know my laptop isint because when I factory reset it, it works fine but when I restart my laptop it has the same mistake once more. Please help me!

Community of HP thank you!

So I just realized that it was the driver problem! So I have unisntalled the Conexant driver and now it works again!

Tags: Notebooks

Similar Questions

  • Conexant High Definition SmartAudio 221 stereo mix

    Toshiba Satellite P300-20 has

    Part number: PSPCCE-05F011RU

    SOUND CARD
    Conexant high definition SmartAudio 221

    What will do to make the sound could write with the internal mixer?

    Driver screenshots: http://s42.radikal.ru/i096/1002/57/4db4b07879cd.png
    Peripheral connected screenshots audio http://s43.radikal.ru/i102/1002/e9/8b54680162b2.png
    Here is my audio devices are connected
    Screenshot:
    http://S005.Radikal.ru/I210/1002/2B/fe5cb81118c9.PNG
    Help solve the problem, it is necessary to register using an internal mixer, a sound that goes from the computer, rather than external.

    This wire provides a statement. + how to turn on the stereo mix in driver Conexant Sound +.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=65162

    A big thank you to user prestativo

  • ASIO Driver for the Conexant high definition SmartAudio 221

    The laptop is: "Satellite Pro P300 PSPC5E.
    The sound card is: "Conexant High Definition Smart Audio 221.
    The operating system is: "XP".
    The driver instaled audio is: "Conexant HD Audio version 3.47.1.50" (the only one offered by Toshiba in the drivers downloads page) (comes in the zip file: 'sound - 20081014174616.zip'.) Once installed the reported driver file is: "CONEXANT\CNXT_AUDIO_HDA\UIU32a.exe")

    The problem is that this driver works slowly with the software for music production Steinberg "Cubase 5".
    Steinberg recommends the use of an ASIO driver for the better functioning of Cubase 5.

    So, the QUESTION is: "Where can I find, if it exists, an ASIO driver for the Conexant High Definition Audio Smart 221 to install in the Toshiba P300 with XP OS?"

    Conexant page there is no option to ask.

    Thanks in advance.

    G.

    I'm sure that Toshiba doesn't support these things and with this problem, you are on your own.

    Another thing: Satellite P300 is designed for Windows Vista and it would be interesting to know if there is a difference if you run this on Vista.
    Version Vista. Steinberg "Cubase 5"?

    They have the best experience with own product and I'm sure they can help you with this. If they recommend something, they know where to find it. Recommendation is based on the tested driver. Then ask them where to find this driver.

  • Windows 7 32 bit do not recognize Conexant High Definition SmartAudio 221

    Software drivers appears but does not recognize

    Try reinstalling the driver from this link.

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=ob-56160-1

  • Satellite A300 - impossible to install the audio driver Conexant high definition

    I have a Toshiba Satellite A300 series with Conexant audio... my problem is the following...

    I can't install drivers for Conexant high definition audio in windows vista 64-bit because when I run the installer smartd 221...

    + Setup properly detects the type of audio chipset, but at the end of the installation, finish with the message 'Fail'... +.

    The version I have installed is 4.36.10.0...

    Thank you...

    I'm sorry for my English

    Hello

    Have you tried to remove the sound from the device manager card, first of all?
    If this is not the case, to do this.
    Remove it, and then restart the laptop.
    After restarting again, windows should recognize the sound card and eventually he would ask for the driver.
    Then you could point to the new driver downloaded files and could complete the installation.

    See you soon

  • What is the audio driver support device conexant high definition

    What is the audio driver support device conexant high-definition?  When I try to install the driver, I get a message saying that the installation has failed not found media device.

    Since you are not the original author (which never came back after his original post in April), if you have a similar problem, then the answer is similar: reinstall your drivers.

    http://welcome.HP.com/country/us/en/support_task.html

    MS - MVP - Elephant Boy computers - don't panic!

  • Satellite A300D with 64-bit Vista - drivers for Conexant High Definition

    Hello

    I got Satalite A300D-15B AMB 64-bit laptop with Vista 64-bit installed. After I installed Vista, it automatically takes the audio drivers for sound card, but Dolby has failed.
    I tried to install the drivers of toshiba, it fails.

    Can someone guide me how to install the drivers for Conexant High Definition Audio Vista 64 bit please...

    Kind regards
    Ganesh

    Hello Ganesh

    Sorry, but this laptop model is not supported for Vista 64 bit and I don't know what the driver installation you are writing about.
    What you can try is to download and install THIS driver.
    It's driver for Satellite A300 but this laptop has the same sound card as your Satellite A300D - Conexant CX20561.

    Please post the results.

  • Satellite A300 - 15 k + WXP x 64 bit - conexant high definition smartaudio

    I installed XP 64-bit on my Satellite A300 - 15 k and I can not find driver for his "conexant high definition smartaudio" card drivers for xp on Toshiba web there but they do not work with XP 64-bit.

    Where can I find drivers for xp 64-bit?

    Hi mate,

    Wherea´s the problem? Just google for it and you should find it. I guess that when the research on the conexant site, then you should come away instead of looking for this driver on the toshiba site.

    Just Google her, google´s your friend ;)

    Welcome them

  • IDT - Audio - IDT High Definition Audio CODEC-updated, problems with the audio

    I recently installed successfully IDT - Audio - IDT High Definition Audio CODEC and after that none of my audio worked. Everything indicates that the audio is working as usual, but no sound. Also, when I did a test "sound" in the control panel > sound, it is said "the test could not be played. (Translated from Finnish Windows Vista, but anyway). I went to IDT Audio settings (from the bottom right icon) and noticed that my headphones and speakers had been cut so I removed the 'secret' of these two, but nothing happened. I tried to restart the computer several times and recheck the IDT Audio settings but nothing found which could cause the problem.

    Hey Andyy27,

    My HP Support Assistant tried to make me update this driver I have the computer in mid-August.  Same thing; whenever I have install the driver, there is no sound either - I have not known what you mentioned above on the sound slowly disappears.  Thahaseena, good to have you hear.  I am running Windows 7 family on a HP Pavilion dv6 Notebook PC.  After installation, there is no request to restart or stop to install updates; my sound card lists an error and I have to roll back the driver to make it work again.

    My driver date is January 13, 2010, version 6.10.6265.0.  It's one that I continue to back and it works.  I will install the update now and tell you what I get for audio driver is not working.

    The properties of my IDT HD Audio CODEC says:

    Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

    You must restart your computer before the changes made to this device will come into force.

    New driver that disables my sound: June 17, 2010, version 6.10.6289.0.  Well now, it asks me to restart, but I'm not having good hope... will write if this time it solves the problem (4th time charm?).

  • Driver problem Audio IDT high definition (HD) after windows 8.1 update 1.

    Hello. I have HP Probook s 4730. After you install the update to Windows 8.1 1 the audio driver has stopped working properly. When I want to play some music or even video system sounds, noise appears after 1-2 minutes. At that time, disk use is 100% cause of isolation of graph for the device windows audio. I installed this driver Audio IDT high definition (HD) on the support site for the driver of HP, but it does not work. As I see it in the device manager driver release date is 24.10.2012. I think it's too old for Windows 8.1. Can you help me? Y at - it another more recent version of this audio driver? Also I send only two pictures where are drive HARD use and driver release date.

    I found a solution to our problem! I installed this driver Windows 7 in compatibility mode. You must remove this one for Windows 8.1 in programs and features, then download this version I have already mentioned, sole extract in a place where you want and install with compatibility mode. To do this, you must enter the configuration properties, then compatibility mode and select Windows 7, also check "Run this program as Administrator". This driver works fine for me. Hope you enjoy it also.

  • Laptop of HP ENVY 15 TS: problems installing the audio driver (High Definition Audio device)

    Hi all

    My product is the HP ENVY 15 TS laptop.

    Product number: E3B65PA #AR6

    OS: 8.1 64-bit Windows

    A few days ago, I upgraded my windows to windows 8 to 8.1 windows and found that no noise from HDTV when hook up my HDMI cable however video is perfectly fine. I was completely baffled because the audio was working perfectly fine before the upgrade to Windows 8.1. I tried several solutions posted on other forums, such as install other drivers and uninstall the IDT High Definition Audio Driver and then scan for hardware changes. I checked the HDMI cable and it works very well with the other laptop.

    Device Manager is needle 2 device:

    High definition audio device (yellow own showing)

    IDT High Definition Audio CODEC

    When I open the properties of the audio device high definition, that is to show:

    This device cannot start (code 10)

    {Operation failed}
    The requested operation failed.

    If anyone knows how to solve the problem, please help me

    Thanks in advance

    Hello:

    Audio driver IDT (portable speakers) seems to work very well.

    The problem is probably with the Intel graphics driver that controls the HDMI audio.

    My recommendation would be to install the latest Intel graphics driver from the link below and see if that fixes the problem.

    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%208.1%2c%2064-bit * & DownloadType = 0a % 09% 09% 09% 09% 09% 09% 09Drivers % 0 a 09 09% 09% 09% 09% 09

  • Problem with the driver for Audio device high definition

    I have a Windows 7, 64-bit, Studio 1558. When I started the computer about a week ago, I was a message that the Service Notification of system events cannot connect. I checked the event log and found error 7022, where it says that the audio device was suspended. After some research and experimentation, I made the error go away by turning off the (Microsoft) High Definition Audio Device Driver, Version 6.1.7601.17514. However, now I have no sound. I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one. I'm not sure what caused the problem. Some said similar positions that he was leaving headphones plugged to power off the computer. others said that the use of cmd-> "netsh winsock reset" would solve the problem (of least temporarily). Any of these seemed to help me. Basically all I want to do is to install a sound device driver that works. I hope someone can point me in the right direction to do so. Thanks for any help provided.

    DellRaiser
    I tried updating the audio driver for my computer (IDT 92HD73C1 Audio, v.6.10.0.6267, A18), but this doesn't seem to work, and now I returned to a previous restore point to go back to square one.

    I can't say that if you were not able to install the driver IDT or if you installed but got the same error message.

    If the first case, try to download one of the files directly from the ftp server of DellIDT.

    If the latter, if you get the same symptoms with the IDT pilot and the native Windows (high definition Audio Device) driver so it is difficult to see the drivers as the cause of the problem, because it is rare that two drivers have the same failure at the same time. Here's how to switch between the 2 pilots:

    1. open Device Manager (type devmgmt.msc in the start search box and press ENTER) and right click on IDT High Definition Audio Codec.
    2 Select this option to "Update driver software".
    3. click on "Browse my computer for driver software".
    4. click on "Let Me pick from a list of drivers on my computer".
    5. put the "Show compatible hardware" check box if not already checked.
    6. in the list of devices, click on 'High Definition Audio'.
    7. click on "next".
    8. in the update driver warning box, click 'Yes' (the driver).
    9 restart the portable computer if you are prompted. If not invited, so no need to restart.

    To reverse the process, change the names in steps 1 and 6.

  • Windows XP Home on the Portégé R700-1F7 - missing Audio on high definition audio bus device

    Recently bought this laptop, need to downgrade to windows xp, wiped the drive and installed new copy of win xp sp3 and site form s Toshiba drivers installed, however always have reported the driver for Device Manager

    Audio device on high definition audio bus is missing

    Tried to reinstall the audio drivers and chipset again, tried windows update and driver genius, nothing is solve the driver problem, can someone let me know what is the missing driver and where can I download it?

    Thanks in advance

    Hello

    I n t have this Portege model but here is WXP install the and please install all the stuff after this installation order. Maybe this will help you to operate all hardware and software components preinstalled so you. Please post comments.

    Windows XP SP3
    Synaptics Touch Pad Driver 15.0.12
    PatchFiles USBKB918005.reg
    USB3.0 Driver 1.0.20.1
    Driver USB-Serial 1,00,000
    Sun Java2 Runtime Environment 1.6.0_20
    TOSHIBA Assist 1.03.00_I
    Skins for Media Player 1.00.1121 TOSHIBA
    TOSHIBA Assist 1.2.2 security
    Trusted Platform Module 3.60.2071.00
    V2.1.1.0 pilot TPM
    SW 9.1.1.1024 Chipset installation utility
    Intel Management Engine Interface 6.00.40.1215
    Intel AMT 6.00.40.1215 software
    Driver Intel 6.14.10.5258
    Realtek Audio Driver 5.10.0.6083
    Intel LAN Driver 14.6 (IN146AAW7C)
    Ricoh 2.09.03.01 card reader
    Wireless LAN
    Module common TOSHIBA V6.07.01
    TOSHIBA Web Camera Application V1.1.2.13
    Fingerprint AuthenTec Driver 3.0.1.149
    PatchFiles2 DisableFingerprintSelectiveSuspend
    Finger_print_restart V1
    Smooth view TOSHIBA 2.0.0.25
    PC Diagnostic TOSHIBA 3.2.15 tool
    TOSHIBA v3.37.4310 controls
    TouchPad On_Off 2.5.4.0 utility
    Battery Bluetooth for Windows by Toshiba v7.10.14_XP_SE (T)
    ConfigFree 5.90.18
    TOSHIBA Mobile Extension V3.94.00.XP
    Utility password TOSHIBA v2.01.10
    Utilities TOSHIBA 4.30.29
    TOSHIBA HDD Protection 2.3.0.1
    TOSHIBA HDD_SSD the attention of 3.1.0.6
    TOSHIBA Hotkey Utility for V3.7.0.0 display devices
    TOSHIBA display device change V3.4.0.0 utility
    REG TPSReg
    TOSHIBA Power Saver 7.14.00
    Timeout15 D15Sec
    Wireless keyboard shortcut 129 3.0.0.9
    TOSHIBA PC Health Monitor 1.6.2.0
    TOSHIBA Sleep 1.4.1.2 utility
    TOSHIBA V2.50.1.07 DVD PLAYER - HAS
    TOSHIBA Service Station 2.1.40
    PatchFiles3 AHCI-IDEREG - 1.0 - ENG
    TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 7
    PatchFiles4 PatchFiles_WOL_1.0.0

  • HP 8440p: Audio device high definition - device cannot start (Code 10)

    I'm having a problem of isolation an indication in device with high definition Audio Device Manager. I have Intel Graphics with this machine. The OS is W10 Pro. I loaded the audio driver for Windows 7 64-bit, but that made no difference.

    Device Manager indicates that "this device cannot start (Code 10)"

    Driver date 09/07/2015 / Version - 10.0.10240.16384 / Microsoft driver

    Details tab - value = device high definition Audio

    Tab events - (information)

    Device HDAUDIO\FUNC_01 & VEN_8086 & DEV_2804 & SUBSYS_80860101 & REV_1000\4 & 36c4990c & 0 & 0301 requires installation.

    Any guidance is appreciated.

    Hi @JS2045

    The audio device problem HD, what you see is the Intel HDMI audio device that needs a driver.

    I looked around for a driver W10 to the hardware ID you have published and fails.

    This device is necessary unless you want or need audio via the port display.

    The only suggestion I can offer would be to try the graphics driver Intel W7 laptop support and driver page, but install it... so that you target just the audio device problem...

    Download, but do not work with this graphics driver...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=4095873 & swItemId = ob_127914_1 & swEnvOid = 4059

    Download and install this free utility for files.  64-bit is the second listed file.

    http://www.7-zip.org/

    After installing 7-zip, do a right-click on the graphic driver file you downloaded, and select 7 - zip in the list of items.

    Have 7-Zip extract of: and let it extract the driver for the name of the folder (sp64360).

    Go to Device Manager and click on the audio device problem Intel HD requiring the driver.

    Click the driver tab.  Click on set to update driver.

    Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

    Make sure that the include subfolders is selected and see if the pilot goes like this.

    Then restart.

    If you explore the driver folder 7-zip created, and then open the DisplayAudio folder, you will find the setup information file that has the hardware ID you reported that supported by the driver.

    If this driver audio works on W10, I don't know.

    But if you want to give that a try, it would be a way to do it without messing with the real graphics driver.

  • Audio IDT HIGH definition no sound Manager

    Hi all. I have HP Pavilion laptop 2382sa g6. Today, I'm very said trying to find his manager

    in my laptop to change the sound quality with equalizer. Sound card is codecc IDT HIGH DEFINITION.

    So, I was unable to find his Manager. On google I found this laptop IDT Manager exist then why Miss me on my laptop. In the case where for noobs yes I reinstalled drivers form audio hp support.

    Guys give me feedback what to do.

    Okay, that's a very clear answer. And im not happy with this. Not all providers do it as you say it's a lie. Why realtec comes with Manager audio soft preistalled? He never comes withuot it doesn't matter it is desctop or laptop. I think it's a thing of HP company to save money on low end pc parts, as a sound card as the card wifi and must be others (ralink, idt, terrible cooling system). As I said I saw on idt hd audio Manager google exist. So it must be pristalled with all the pc hp usess idt hd audio. Like to see HP began selling horses with 2 legs if understand you what I mean.

    Sorry for the English spelling is not my mother tongue.

    Ok. I have sloved my problem myself. thirst first I uninstalled the idt with whole software drivers, restarted the pc, windows has istalled base hd, form downloaded audio drivers drivers HP again, he unpacked in my chosen and installed foldger. Went through Control Panel and found ""Dolby advanced audio v2 " it wasn't there until I checked several times." So now I have full control of my sound card or let as much as it good for my needs. I hope that this will help others to slove the same problem if they have.

Maybe you are looking for

  • Transitions are disabled in the trial FCPX?

    I use Final Cut Pro X trial.  I try to add a transition between two clips of long and it does not allow me to slide between the clips.

  • Make easier to interpret nntp thread state

    If I understand correctly, when the nntp component is updated, the new nntp threads are emboldened and existing nntp son who have been added to the are underlined. Is it possible to change the underscore to encourage - as in MS OUTLOOK. Blame my view

  • Satellite L500 - black screen after a reboot manual or automatic

    Hello world This has me frustrated for three weeks, but I only just realized it is associated with manual restart or software required. My old 6 week L500 laptop refuses display different lights for indiactors on AV - no light on the keyboard, no scr

  • MainStage 3.2.3 hangs at startup

    MainStage 3.2.3 crashes on launch telling MainStage 3 shut down unexpectedly. I tried Trashing preferences and away the Mainstage of my concerts folder. It always crashes at launch. I don't have a backup. Please suggest a fix soon OSX: 10.11.3

  • error 0xbfff003a

    I have a couple of quirks happening.  I'm trying to control a device (solenoid driver) through the USB port via an interface card that has a PIC18F1450 on it.  I managed to control the device with the code in the image (without the VISA read).  The C