confgurar rede sem fio
can not configurar minha rede sem fio
Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:
Tags: Windows
Similar Questions
-
Devo ter desinstalado some rede sem fio programa e nao to access algora ter wi fi
EU fled em redes sem fio e todos os programas than ali tavao desinstalei e agora I can not instalar rede sem fio fico so conectado por cabo pelo roteador... como EU FACO pra o programas download
Look in the lower left corner of this window.
Where we see English, click on it and select your language from the list.
OR
-
tenho um roteador delik wave esta conectado Doi pc comvensionau e um notbook na sem fiu warilles e um outro notbook sinal gift but nao conecta, preciso saber is e comfiguracoes OU e reader
Please click on the icon of language at the bottom of this page to select your language from the list of countries / regions to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the language there, the support options for additional international sites are at the link below:
http://support.Microsoft.com/common/international.aspx
Por favor, no language icon na parte inferior da page para selecionar o idioma has go da lista of countries of the clique / regioes para postar sua question no idioma of sua choice. O forum go e voce para Inglés only. SE você não o idioma desejado la, suporte para may find other localidades Affairs pode ser encontrada through link abaixo:
http://support.Microsoft.com/common/international.aspx
Obrigado.
-
O meu PC possui um roteador rede sem, so than nenhum outro computador, seja no or any access minha do outro not rede sem fio quando entro no gerenciador rede SEM fio encontro a seguinte critica 'O PC parece estar configurado background, mas o o recurso (Servidor DNS) nao esta respondendo device', qual a Solução para o problema?
Hello
You created this thread in the English version of the Microsoft Community. Please could you click on the globe icon to the world at the bottom left of the screen and then choose your preferred language. Now create your thread again.
If you can't find a suitable language, please go here:
http://support.Microsoft.com/common/international.aspx
for other international support options.
Thank you.
-
Perimeter network Rede Sistema de Rede Ethernet Sem Fio useful NIC
Todas as vezes as vou connect na rede via roteador sem fio com o mouden fixo, ele blequeia, levo e um tempão by to connect after
try todos recursos possíveis through do windows. EU uso mouden ZTE da operadora oi com um roteador sem fio da marca MULTILASER.
Please select your language in the drop-down list above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Also note that this forum is for comments on the forum answers site. Please ask your question in a forum specific to the application issue.
-
I have a message rede sem access al a rede.
consultei ja varios casos na internet resolver e I can not.
alguem poderia me help?
Ficaria muito grateful, pois ja tem uma semana as estou procurando uma Solução, see as tem.
Obrigado.
Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:
http://support.Microsoft.com/common/international.aspx
Please, select su idioma in her lista desplegable anterior to send you in el idioma of choice su pregunta. El foro Québec ha published're para frances only. If usted no encuentra el idioma no desee por encima of las options para support otros destinos international themselves can find following el siguiente enlace: (sp)
Please get your language in the drop-down list above pour post your question in the language of your choice. The forum you posted is in English only. If you can't find the language of your choice above, options of fees to pay to other international destinations can be found by following the link below: (en)
If get di rates the lingua dal menu a discesa by send her tua domanda nella vostra scelta di lingua. Forum it cui hai posted by e by solo inglese. SE non riesci a find wishes of the lingua, he supporto delle options by Esil international further if can find following he link that sotto: (IT)
Por favor, selecione o idioma na lista suspensa acima para enviar sua question no language of his choice. O forum go e voce para Inglés only. SE você não o idioma desejado acima, suporte para may find other localidades Affairs pode ser encontrada through link below: (Portuguese)
-
JA configurei minha rede sem fio, but I can not receber a rede deum computador para o outro dentro da minha casa, como FACO?
Hello
See this page to select your language:
http://support.Microsoft.com/common/international.aspx
====================================
Or sorry that it is area English.
Left click at the bottom of the Microsoft Community page
English and set your language.
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
MEU computador esta conectado several redes, o FACO pra ficar so has minha rede privada?
MEU computador esta conectado na rede domestica, mas esta conectado also has uma rede publica, e isto tem feito as minha internet nao functions. O that FACO? Quando EU a desativo rede publica a minha internet watch a useful um local nao works so a conexao sem fio. O than FACO pra nao ter esta rede Pública me atrapalhando?
Inappropriate feedback >
Hello
You asked your question in the text of the Microsoft Community. Please you would click on the 'Change Region' button down to the left of the screen and select your preferred language. Now ask you question once again.
Thank you.
Translation of Bing above:
OLA
Voce question seu na versão Inglês do Microsoft Community. Por favor, no "Mudanca region" automatica no canto inferior esquerdo da tela, em seguida, selecione seu idioma preferido clique as voce. Agora pergunte voce question again.
Obrigado
-
Wireless driver not working not
Hello, I have HP 15-g022np and I have installed Windows 7 Ultimate x 64, but I have a problem, I can only use internet with Ethernet cable.
I installed this: driver rede local sem fio LAN series Qualcomm Atheros QCA9000 of my drivers model and still does not.
What I am doing wrong?
Hello:
You need the driver for the wireless card.
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_134477_1
You need this driver for bluetooth:
http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_134460_1
You need this driver for the USB3/SMBus:
http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064
PCI device:
-
CS6 PS 16bpc shape burst gradient of transparency problem
Hello
Huge first post, I tried to keep it concise, thanks for reading.
The combination of:
(1) image 16bpc. that contains a non-empty layer with the layer style to:
(2) race: shaping Burst: degraded; and
(3) transparency in the gradient (red > semi transparent white) race:
causes the entire race to make transparent. Changing one of the points of (1), (2), or 3) causes the entire race visit as planned. For example, starting with an image with this combination of shape/16bpc burst/transparency in the gradient:
-just hang out to 8/32bpc 16bpc renders the stroke properly. Switch back to 16bpc, the stroke becomes transparent.
-just burst radius shape correctly renders the stroke (in the radial direction). Return to the rafale form renders the transparent stroke.
-simply by changing the solid red gradient > white Uni renders the stroke properly. Change the solid red gradient > semi transparent white restores the all transparent stroke.
8bpc + burst + transparency in the shape gradient = correct, partially visible
8bpc + burst + solid shape gradient = OK, visible
8bpc radial + transparency in the gradient = correct, partially visible
8bpc + strong + radial gradient = OK, visible
16bpc + burst + transparency in the shape gradient = incorrect, transparent
16bpc + burst + solid shape gradient = OK, visible
16bpc radial + transparency in the gradient = correct, partially visible
gradient radial + solid = OK, visible + 16bpc
32bpc + burst + transparency in the shape gradient = correct, partially visible
32bpc + burst + solid shape gradient = OK, visible
32bpc radial + transparency in the gradient = correct, partially visible
32bpc + strong + radial gradient = OK, visible
Comments:
-The race is still there in this combination, such as applying also a shadow reveals the drop shadow is offset a distance by the thickness of the line, it makes it just completely transparent race.
-The layer itself and the other layer styles are still visible.
-C' is 100%/Actual Pixels (since it is sometimes a question). Interestingly, lower zoom of ~ 60%, the race renders correctly, but zooming in again, it becomes transparent. Navigation preview renders the stroke correctly at all zoom levels.
-Flattening/pixelation still renders the transparent stroke.
-Ditto for new/existing/duplicate files.
-Ditto for sRGB/ProPhoto/no managed.
-Even after purge
-Even after rebooting.
-Ditto for PSD/PSB.
-Ditto for the x 32 (on Win7x64) and x 64 (on Win7x64).
-Ditto for the disabled/enabled reduced GPU.
I have a workaround, change of the slope, for example:
Fixed red > red transparent; TO
Fixed red > white Uni; and the blending mode to linear density parameter.
It is very annoying, however, and is not always look the same. I'm conversion ~ 400 8bpc multi-layer psd 16bpc to eliminate a problem of widespread banding (several layers, gradients, masks, degraded and degraded styles), number with this combination. The conversion was easily addressed by lot for the 8 > 16bpc part, but lack the layer styles in this combination. Layers with this solution to workaround/combination of treatment must be done manually through combinations of different colors, orientations, amounts, etc. They are all unique compositions with little similarity.
Flattening/merge layers in 8bpc first to preserve the race and then by converting to defeats the purpose of the conversion of 16bpc 16bpc to eliminate banding.
Similarly, I use 32bpc Smart layers to these layers, but that means still to find the offending manually layers.
Last resort I tried to convert in 32bpc, but some of the most exotic fusion used styles are not available in 32bpc; the files are already huge, some of them PSB, is another factor. and I have a lag of contrast when you convert 8bpc to 32bpc which does not occur during conversion 8bpc > 16bpc (they were initially created on a monitor not profiled with colors unmanaged [error made during the transition from sRGB CRT > wide range LCD]).
Thanks for reading.
CS6 Mstr Coll PSx32 | PSx64 Win7x64 16 GB i5-750 GTS 250 1 GB
That seems to be and has been a problem for many versions of photoshop, at least from photoshop cs (photoshop 8) leave.
Yes, I tested in photoshop cs and seems to do the same in 16-bit/channel with a stroke: shape gradient burst with transparency.
You could report it on the
-
Hello
I have a simple game based on examples of help sheet and drop. A main cloth forming the majority of the scene. In which I have a small canvas that contains an image and a label:
< mx:Canvas id = "myCanvas" width = "100" height = "100".
x = "100".
y = "200".
mouseDown = "doIconClick (event); ">
< mx:Image id = "img" height = "60"} width = '80' source = "assets/thumb.jpg" scaleContent = "true" horizontalCenter = "0" / > "
< mx:Label id = "thumb_label" text = "The Label" fontWeight = "bold" width = "100%" textAlign = "center" fontSize = "10" y = horizontalCenter '70' = '0' / >
< / mx:Canvas >
in the doIconClick() function, I have the standard code canvasProxy since the help file (twisted for color):
var canvasProxy:Canvas = new Canvas();
canvasProxy.width = getScaleSize (100);
canvasProxy.height = getScaleSize (100);
canvasProxy.setStyle ("backgroundColor", "#ff0000");
DragManager.doDrag (dragInitiator, ds, event, canvasProxy);
That creates just a square red semi transparent that you see when you start to drag the canvas autour. What I want of course is to fix things so it looks that you drag the image and name, as you can see, if you drag the same thing from a horizontal list, for example. I feel I should add a child somehow canvasProxy for the image and label element object, but I'm quite confused on how to go on this issue, if this is even the right approach, or even if it's possible!
Thanks for any help,
Rob.addChild, it is then!
var canvasProxy:Canvas = new Canvas();
canvasProxy.width = 100;
canvasProxy.height = 100;
canvasProxy.horizontalScrollPolicy = 'off';
canvasProxy.verticalScrollPolicy = 'off';var imageProxy:Image = new Image();
imageProxy.source = "thumbnail.jpg;
imageProxy.height = 60;
imageProxy.width = 80;
imageProxy.scaleContent = true;
imageProxy.setStyle('horizontalCenter','0');
canvasProxy.addChild (imageProxy);var labelProxy:Label = new Sun;
labelProxy.text = "label";
labelProxy.y = 70;
labelProxy.setStyle ("fontWeight', 'fat'");
labelProxy.setStyle('horizontalCenter','0');
labelProxy.setStyle ('textAlign', 'center');
labelProxy.setStyle ("fontSize', '10'");
canvasProxy.addChild (labelProxy); -
environment:
MacBook pro early 2011
Mavericks OS 10.9.2
Thunderbird v29.0
I have several IMAP and POP accountsSince the previous version of Ta seized semiautomatic is no longer you propose names. In addition, the name filed by default for a type police red color, and I also noticed that I have 5 instances separated from personal address book, collected address book and address book in MAC OS X...
Pls help!
Thank you
Check to see if it is an another Add on the cause of the problem, in SafeMode (help/restart with disabled modules). AutoComplete works here on TB 30.
-
MEU MacBook Air esta sem o som do alto-falantes. Coloquei ja e retirei os ouvidos fones, como relatado, e nada. Cruiser parece funcionar usually, POIS quando ligo ele o som caracteristico Grill. Antes EU ligava e quando desligava o som voltava a funcionar, mas agora não but volta.
Is there a red light in the Audio output Port?
Try a reset of the NVRAM:
https://support.Apple.com/en-us/HT204063
Ciao.
-
Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx
The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable. There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary. There is also a post here that shows how to solve one of the problems mishandling can cause. Do not clean the Strip unless necessary.
The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:
- Prints "stairs" to the bottom of the left margin of the self-test page.
- The margins left or right of the self-test are not properly placed.
- Ink cartridges carriage slams on the left side of the printer.
- Automatic test double-print or obscured shows the letters.
- Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
- Printing stops and the lights of the Control Panel on the printer indicate an error.
- Gaps appear in the printed text or images.
- Slow printing
CAUTION:
Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.
-
Windows 7 media center can control a Fios (motorola QIP-6200-2) decoder?
Hello
I have windows 7 Ultimate 32 bit, and I try to get media center to control Fios box. The decoder is a motorola qip-6200-2. All control codes for motorola 17 tried, without success. Have also tried the automatic configuration using the remote to fios. Hving Media Center learn the remote control codes were not working. The ir blaster/receiver works correctly, it flashes red when I try the contol codes in media center. It is posistioned of materials on the decoder.
Any help would be greatly appreciated.
HelloThanks for posting your question in the Microsoft community forums!
I recommend you to run the TV Tuner Troubleshooter and check if this solves the problem.
Reference:
Open the set up TV tuner Troubleshooter
http://Windows.Microsoft.com/en-in/Windows7/open-the-set-up-TV-tuner-Troubleshooter
If this doesn't fix the problem, answer to us for further assistance.
Maybe you are looking for
-
Web site keeps refreshing with flash game to "Application activation" - Version 26.0
Updated to v26.0 and now when I open the site http://www.dcpages.com/ wuth the value "Application activation" flash payer page refreshes continuously. It wasn't a problem with v 25.0. I also have a second machine running Windows 7 (64 bit) and it has
-
HP Deskjet Ink Advantage 3545: Could not find a cartridge for my printer to the Canada
Hello I bought a printer HP Deskjet Ink Advantage 3545 flipkart when I was in India. We used to but 678 HP cartridges for the printer. Recently, I moved to the Canada and you have the printer with me. I'm not able to find here compatible cartridges f
-
Satellite C850 - 1 9 8 Windows recovery disc language NH
Hello C850 my gran has a dead hard drive, and she did not Windows 8 recovery disks.I am pleased to order them directly from Toshiba, but when I do the single lagnuage option is NH. NH, what exactly? I need them in English. Any ideas? KeV
-
Cannot create because of hidden file hiberfil.sys.
I can't activate hibernate on my Windows XP Home Edition because it is actually impossible to create the hiberfil.sys file. Any attempt to create the file cause error 'access denied '. I am an administrator on the computer and you can create any othe
-
At the start of the laptop goes to a black screen and says invalid partition.
Original title: can I PRO 1-2cpu (IBM Laptop) Xp. Not long I Formated my Windows XP PRO 1-2cpu, thinking that he would have run faster, not a blue screen crash and eliminate any viruses that could in fact, now that its formatted I can't use, whenever