ConfigFree does not work on my Tecra S2

Similar Questions

• Portege M600 - ConfigFree does not work very well

  Pls help friends...

  I've used it before very well with ConfigFee.
  Once I changed the profile, the LAN and wireless IP change correctly.
  I m on WinXP SP2. I just reinstalled Windows and ConfigFree does not work very well.

  I have LAN IP and wireless in this profile.
  I have the problem when I change the profile, I received the error message for the wireless IP does not change (the question did not pass.) TCP/IP configuration

  The following may be responsible for the failure. Wireless LAN Utility is active (Please close the utility). Network Properties window is open (Please close the window). The Internet options window is open (Please close the options window). I use PROSet to control the wireless.

  I tried the solution proposed and even reboot my laptop, but there s no chance...
  Can help you pls?

  First of all, you can use a single tool to configure WLan.
  You cannot use Windows WLan configuration option, the Intel ProSet utility and ConfigFree at the same time.

  Second, I put t understand why you use ConfigFree to Wlan configuration.
  In case you, I advise to use the Intel ProSet tool or clean Windows WLan settings.

  In addition, I put t understand why you change the LAN and Wlan profiles?
  In all profiles of your Wlan IP address must be set to automatic as the WLan router automatically assigns the IP address.

  But like I said above; only one WLan configuration tool can be used!

• Hibernate does not work on my Tecra S10-101

  Hibernate does not work on my new Tecra S10-101. I searched the internet but
  has not found a good solution. Cuisne someone provide help to solve this problem?

  Kind regards

  Bert

  Please explain the problem more.

  What do you mean by "does not?

  You can enter at least hibernation?
  Pick up from the hibernation failure?
  Hibernation is missing in power options?
  Are you running XP or Vista?
  What Service Pack you have installed?
  Did you install your own version of Windows or is - what a correct installation of Windows from Toshiba?

• Keyboard does not work on my Tecra A3

  Hi guys... I have a problem with my Tecra A3.
  Keyboard does not work! I bought the new keyboard but its too does not work...
  I think that the problem is related to the controller keyboard or motherboard.

  How can I solve this problem?

  I agree with you. I think also there is problem with keyboard controller.
  What should do? I put t believe there is nothing you can do everything alone.
  As far as I know the controller is placed on the motherboard and I have fear of service can say that the whole motherboard must be exchanged.

• Built in microphone does not work on my Tecra A9

  I have a Tecra A9 PTS52A-OEYO3F

  My operating system is XP Professional.

  I'm trying to set up a Skype account without having to buy a plug in microphone. I think that my Tecra A9 has a built in microphone. When I test the equipment via the control panel / sounds and Audio devices / voice / hardware test, an error message indicates that my voice could not be detected. Also, a similar Skype test revealed that my voice could not be detected.

  The user manual on page 4-23, under the heading level Microphone sets out the process to change the logging level. Step 1 requires a right-click the speaker icon in the taskbar to reveal devices of recording on the submenu. When I perform the right click of the "speaker" of the menu has revealed icon includes "Open Volume Control" and "Adjust Audio properties". There is no option of "Recording devices" where only the instructions in the manual do not apply.

  I'm not convinced that I have a microphone, and if I do then why it is not working.

  Thank you

  If your Tecra has a build-in webcam so he must have mic too.
  Are you using the original recovery image Toshiba WXP or you have installed Windows XP Home edition on your own?

• The volume control does not work on my Tecra A9

  Hi all

  I just be reformatted my laptop and put all the drivers and have a slight problem my on the front volume control not working anymore.
  How to operate?
  Also when I go to Toshiba Assist on doctor connectivity the bluetoooth does not come to the top. How can I get this back up?

  Thanks Pob

  Hello

  Have you installed the operating system using the Toshiba Recovery disk?
  If not; do you have what OS installed?

  It is Win XP?
  If yes you must first reinstall the common Modules then the commands and utilities

• Satellite P300-1FY - Message: Configfree does not work

  Hello

  I want to solve it is to you that I regularly receive a notification (menu of task status bar conFiGFrEE don't work), is a type of laptop Satellite P300-1FY, why do I receive the message and this than that?

  The problem may be caused by trojan or virus such as reported in other forum Toshiba us
  http://forums.Toshiba.com/T5/drivers...OT/TD-p/317426

  I recommend to uninstall the ConfigFree, then analyze and clean the system using antivirus software, but in addition you could clean the registry with CCleaner... after that you could reinstall the Configfree again...

• ConfigFree does not work on satellite A200

  Help, please.
  At the start of my laptop, I get a message:
  NdsLoadString0 has error (not found INI File: C:\Program.)

  Adrian big

  Hi Adrian

  In such situation, the first thing you can try is to delete the pre-installed version and do a clean install. Let's try this as the first step.

• ConfigFree is not working properly under Windows XP

  Looks like the Configfree does not work as it should on my laptop satellite. I get a ghost of an image icon with Summit, connectivity, profiles and Q-Connect points. I can't do anything with, then icons on the screen. Connectivity doctor doesn't seem to work. I run Windows XP.

  Toshiba use ConfigFree for years and, in my opinion, this is one of the best tools designed Toshiba. Reading your ad, no one will be able to say with certainty what the problem is here, but if you think it is not working properly it remove the system, restart your laptop and try to install it again.

  If you do not like this tool use Windows settings for LAN/WLAN configuration.

• Tecra M10 - 10z - 3 G does not work after installing Win 7

  Tecra M10 - 10z, I installed Windows 7 pro 64-bit
  Everything is correctly configured, but the 3G connection does not work: the message is "no network".
  with Windows XP is ok.

  I can't update the firmware or similar.

  Y at - there someone who can help me?

  TKS

  Hello

  To use the 3 G, you should first check whether the module G ericsson 3 has been successfully installed.
  Where there is a visible yellow exclamation point in Device Manager, the 3G driver must be reinstalled.
  I found on the page of the Toshiba UE driver:
  [Driver Win 7 3 G Ericsson | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 295 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 295 & page = 1 & ID = 71930 & DISO =-1 & driverLanguage = 42]

  Additionally, make sure that the 3 G RF power control utility has been installed properly.
  3 G RF Power Control utility"turns your 3 G at the start.

  This tool can be found here:
  [3G RF Power Control utility for Win 7 64 bit, | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 5 & selSeries = 148 & selProduct = 813 selSho rtMod = null & language = 13 & selOS = 30 & selType = 322 & yearup load = & monthupload = & dayupload = & useDate = null & mode = al lMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = 322 & page = 1 & ID = 73658 & DISO =-1 & driverLanguage = 42]

  Hope the 3G network functions the reinstallation of these two tools.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Tecra M10 - Sound does not work on Windows XP SP3

  TECRA M10 sound does not work with Win XP SP3

  1. the drivers from the toshiba web site.
  2 chipset drivers and audio drivers were reinstalled no luck,.
  3. no mute FN + Esc
  4. feature eat that all drivers ok

  Hello

  If I understand your right all devices listed correctly in the Device Manager and you don t have yellow exclamation points?

  Normally, for high definition sound cards, you need two patches from Microsoft:
  KB835221 and KB888111.
  Normally, these patches are integrated into SP3 but it works only if you install the audio driver after SP3. So, if you have an older version of XP without SP3, you must update to SP3, all first and then install the display driver.

  So in your case, you must delete the current sound driver and restart the laptop. Then use CCleaner to clean the registry and system files. Reboot the laptop. Then download and install the driver of his newest Realtek Hompage.

  Good bye

• Re: Sound does not work on Tecra M10

  Hi all

  I have a Tecra M10 with XP and all the drivers installed, but sound does not work.

  I checked the Device Manager and everything is fine, no red cross or whatever it is on the driver realtek audio.

  Everything on the sound properties. I even uninstalled and downloaded the audio driver from the toshiba site again but still no sound and no mistake.
  Can someone help out here?

  Thank you.

  Hello!

  The sound is turned off on your laptop? With the FN + ESC key combination you can enable/disable it.
  Check it!

  In addition to the high definition audio devices you need two patches from Microsoft to go looking for the proper functioning. Have you installed the two?
  Here are the links to the Microsoft Knowledge Base where you can download both:
  http://support.Microsoft.com/kb/835221
  http://support.Microsoft.com/kb/888111

  Good bye

• Tecra 540 CDT: keyboard does not work properly

  Hi people

  Just bought a 540cdt Tecra second hand and the keyboard is a bit strange - A key does not work and some of the keys seem to make things weird-UPDATE prints an exclamation mark and key END operates caps lock etc. I don't know if it's a keyboard of knakckered or whether the same strange keyboard configuration has been made. If it's a flat keyboard will install a replacement to solve the problem?

  Also, is it possible to replace the CD drive with a DVD - ROM drive. From the looks of it all DVD players I have met seem to be model specific.

  See you soon

  Peter

  Hello

  Maybe your operating system has keyboard settings wrong country.
  Check in the control panel settings. But for me, it looks more like a keyboard or a keyboard controller failure.
  Perhaps also loses the keyboard cable.
  I don't know if only a new keyboard will solve the problem. I think the detailed diagnostic test is necessary.
  If you want to upgrade your laptop with DVD drive, please check first if it is taken in charge and compatible. If you install the disc is not compatible, then you will get an IDE error and the BIOS does not recognize the drive.

• Tecra 9100: Headset does not work

  My Tecra 9100, headphone connector does not work. Do the good internal speaker. If I plug in headphones or external speakers, the interns are being extinguished, but external devices, I don't hear anything.

  My sound card is generally, I thought that there could be a chance to solve the problem simply say - and reconnect wire/Council of the front-end connectors to the sound card... but I never did any technichal stuff in a Tecra, so it would be nice if someone could give me feedback where and how to open it, and if it's still a chance to solve my problem.

  Hello

  If you can hear the sound from the internal speakers as well as the sound card works correctly.
  In your case I recommend you first check the audio settings in the audio and audio devices you can find in the control panel.
  Check all THE audio controllers.