Configuration and management use cases

Similar Questions

• Crash course or install, configure and manage?

  I just spent the VCA - VTC

  Then the top is the VCP course but I'm torn between one to take, through experience I was using VMware for about 2 years now. I have bunches vCenter configuration and administered a reasonably small environment on the grand scheme of things and put things in common ground... I'll take the VCP 6 dishes, so be it, but for comparison I've been watching the VMware 5.5 Fast track vs. ICM here: VMware vSphere training comparison 5.X

  I wouldn't go as far as say I am an experienced administrator, but I wouldn't say that I am a beginner. Obviously the fast lane contains much more information if it would suite me best, but what is your point of view on the 2 different courses?

  The first courses install configure manage short this week, although GA was only last Thursday! These are run on the laboratories using a beta version of the software, but that won't be for a few weeks.

  Fast Track for vSphere 6 is not yet available, but you should not wait for a long time (in weeks rather than months)

• CIMC - configuration and management on the side of the BONE

  Is there anyway to manage the MMIC operating system (as it is with HP ILO)?

  Tim,

  Actually, there is a tool (UCSCFG) that will allow you to configure certain settings BIOS and MMIC operating systems supported.

  See below for more information on UCSCFG.

  http://www.Cisco.com/en/us/docs/unified_computing/UCS/c/SW/ucsconfig/install/b_ucscfg_utility.PDF

  Steve McQuerry

  UCS - Technical Marketing

• Suggested knowledge to install, configure, and manage class V4 exam VCP

  Hello

  I'm relatively new to the it field, just graduated from College, and I really want to work to become a VCP.

  I'm looking to take the class install, configure, manage V4 some time next month, and I was wondering what do I need in terms of knowledge required to take full advantage of this course.

  Thank you for your help and your insight,

  Bao - Tran

  vSphere documentation is here: http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esx40_u1_vc40_u1.html

  Evaluation software is here: https://www.vmware.com/tryvmware/?p=vsphere

  And you can be aware of the wider infrastructure (SAN/NAS/network) the best

  Scott.

  -

• Is VMware vSphere: install, configure, and manage a must for the VCP4 certification of the course

  Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!

  Yes, you must take an official course of the exam!

• VI Analyzer - how you re there for this use case?

  My group has different people working on different LVPROJs for every software we have available. Each LVPROJ uses our user.libs and instr.libs, as well as a 'framework' in General, it is the same for most LVPROJs.

  I really think that the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where what tests I run and what are the criteria can be saved and used on any project. I can't get this to work for me. I want to save all these configurations and easily use it on new LVPROJs - the easier I can do this process, the more likely others will be to be used for the revision of the code. How would you do it? (if it's even feasible)

  I suggest the creation of a .cfg file without a link with the project, but with all the tests selected and configured as you wish... so a .cfg file with no 'elements to analyze' specified. Then, when you work on an individual project, open the CFG file, add the folder to the root of the project to the analysis, then save this CFG file with this project. This means that you can not have the project in your CFG file link, but assuming that your project is everything in a folder of level higher, which should not really be a problem, because the CFG file will be "linked" to the moment there in the top-level folder that contains your project.

• How to configure Enterprise Manager Database Control (MCCD) to make it work on 2 servers (primary and standby) work according to the rules of the DG

  Hello everyone I use Oracle Database EE 11.2.0.4 with DG.

  In these cases, I need to get Enterprise Manager Database Control running against DB with no CARS and no DG I do the following:

  I have SQLPLUS logon as user SYS or SYSTEM and drop the account sysman and business objects:

  DECLARE

  CURSOR c1 IS

  SELECT master, synonym_name name

  OF dba_synonyms

  WHERE table_owner = "SYSMAN";

  BEGIN

  TO r1 c1 LOOP

  IF r1.owner = "PUBLIC" THEN

  RUN IMMEDIATELY "DROP PUBLIC SYNONYM ' |" R1. Name;

  ON THE OTHER

  RUN IMMEDIATELY "DROP SYNONYM ' |" R1. Owner: '. ' || R1. Name;

  END IF;

  END LOOP;

  END;

  /

  Mgmt_view DROP USER CASCADE;

  /

  DROP ROLE mgmt_user;

  /

  Sysman DROP USER CASCADE;

  /

  After that, I run

  EMCA - config dbcontrol db-rest recreate

  But what do I do in case I have 2 servers (primary and standby) work according to the rules of the DG?

  Hello

  It is not possible to monitor and administer a basic physical or logical standby, IE using Enterprise Manager Database Control Data Guard.  This is mainly due to the fact that Database Control is designed to monitor the 1-database and an environment Data Guard, by definition, includes more than 1 database.

  If you attempt to run emca against a database of pending, you will get an error like (i.e. ORA-01219: database is not open).

  Of course, database Control, can be used to monitor the current main database (with no capacity to administer or control Data Guard related features).  In such a case, failover Database Control needs to be reconfigured to run on the new primary database using the commands described in detail in Note 278100.1 how to remove, create and recreate DB Control In A Database, section c. recreate/ReConfig DB control, Option 2 10 g. recreate the control DB Configuration files and repository.

  Enterprise Manager Grid Control or Cloud control provides the functionality for display, monitor, and administer the primary and standby databases in a Data Guard configuration.

  Reference: It is Possible to configure the database for a logical or physical Standby Database command? (Doc ID 315116.1)

  You can effectively use EM 12 c cloud control to monitor and manager ensures DB

  Ref to the link for more details below

  Set up and manage to Oracle Data Guard with Oracle Enterprise Manager Cloud control 12 c

  Kind regards

  Rahul

• How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using a single SMTP account?

  How can I configure Outlook Express to receive messages to different mailboxes (via POP3) but to send messages and responses using only a single SMTP account?

  In other words, I need to download via POP3 messages sent to the * address email is removed from the privacy *, * address email is removed from the privacy *, * address email is removed from the privacy * but I want to send messages using Mar SMTP service associated to * address email is removed from the privacy *

  If I get a message like * address email is removed from the privacy * I want to answer as * address email is removed from the privacy *.

  Is this possible?

  How can I configure Outlook Express?

  Concerning

  Marius

  You can do this if the Server SMTP allows you to send from a location that you are not connected via their internet service.  So if you have this permission, go to tools | Accounts | Add mail.  Then under the account of property | You want to set the server for incoming mail to the POP3 account, and then the SMTP protocol for the other account that you use to send servers.  And then indicate whether or not the server requires authentication, and if yes, then you will need to put in the user name and password for the SMTP server it.  Under properties. Advanced to define appropriate ports that may be different from the default value according to e-mail accounts.  You can also check the "leave a copy of messages on the server" for accounts POP3, if you access messages from multiple computers.

  Once you have an account set up, then you can set others upward in the same way, but change the POP3 properties for each while leaving the SMTP ones the same.

  Once you have all that in place, you might want to backup things in case something goes wrong: www.oehelp.com/OETips.aspx#6

  Steve

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• Steps to install and configure Node Manager on the local machine and remote

  Hello
  
  I'm using WLS 10.3 on Windows.
  I did the following till now.
  
  (1) installed WebLogic 10.3 on one machine (local computer, on which I created the field and my Server Admin is under execution. 1 managed server is also created on this machine).
  (2) installed WebLogic 10.3 on computer B (remote computer, which Managed Server 2 will be created).
  (3) on the machine, I used the Setup Wizard and create a domain. When creating the domain, I did the following:
  (i) created two managed servers.
  (II) create a cluster
  (III) the servers assigned to regroup.
  (IV) created two machines.
  (v) the servers assigned to machines (Admin Server and MS_1 to the machine and MS_2 machine B).
  
  (4) start Admin Server.
  (5) on the administration Console, I made some configurations for the node Manager on Machines-> Machine A-> Node Manager. The assigned values:
  (i) type (SSL)
  (II) Address (ip_address machine A) listen
  (III) listening port (5556)
  (6) in the same way it did for Machine B.
  
  So far, phsically the managed server (MS_2) directory and configuration is not there on the Machine B (its only configured on A computer because I created the field on computer A).
  
  I went through the documents on the Node Manager and found what to configure. But I have not found what is the sequence of configuration.
  
  Please let me know the sequence of steps I must follow to install and configure the Manager of nodes on the local and remote machine. I want to use Java Node Manager (not the Script node Manager).
  
  Thank you
  
  Sanjay

  Hello Sanjay

  Basically if I understand your question, you have A machine where you had installed ""(permet de supposer admin serveur) and "VAS_MS1_A VAS_ADM_A" (lets assume the managed server.» And on the second machine B you want to create a managed server 'VAS_MS2_B' which must be controlled by node manager, so that you can start console, auto restart the managed server and perform other activities such as the migration of servers using nodemanager. If this is correct, this is the sequence of steps.

  Since you say you are on windows, I start from the principle

  WebLogic version 10'3
  BEA_HOME:-c:\bea
  WL_HOME:-C:\bea\wlserver_10.3
  DOMAIN_DIR:-c:\VASDomains

  Machine has

  (1) install the BEA.
  Using 2 Setup Wizard) create the domain under "c:\VASDomains".
  (3) to start the Admin Server and connect to the console and create two machines "Machine_A" and "Machine_B". Select the types of machines as 'other '.
  (4) once machines are created go to each machine and go to the tab 'NodeManager' and enter the details nodemanager.
  (5) create server 'VAS_MS1_A' and 'VAS_MS2_B '. Enter the respective details. To "VAS_MS1_A", enter a machine name of host or ip and machine "Machine_A" and "VAS_MS2_B", enter the hostname of the machine B or ip and machine 'Machine_B '.

  Machine B

  (1) on this machine install BEA
  (2) then you have to register the machine with the Manager of nodes. So for this first set the environment go to "C:\bea\wlserver_10.3\server\bin" and run "setWLSEnv.cmd". Then type 'java weblogic. Enter the WLST", once you run this command at the next prompt Details ' connect ('', 'adminserverpassword','t3: / / adminserver:port" ")
  (3) then run this command.
  nmEnroll('c:/VASDomains','C:\bea\wlserver_10.3\common\nodemanager')

  Orders above fits machine with nodemanager. The first parameter is "domestic field", now if you see "c:\". ' directory 'VASDomains' will be created. Second parameter is nodemanager House, now if you go into nodemanager houses that some properties will be updated.
  (4) If this node Manager runs on this computer, kill that one and restart the node Manager again.
  (5) now if you go to "Adminconsole--> Machines--> Machine_B--> Monitoring" you can see the status as accessible.
  (6) now you can go "Servers--> VAS_MS2_B--> Control" and start the server. Newspapers to see how the server gets up the tail.

  If you want more details on "nodemanager", dedicated to my 'vasweblogic.blogspot.com' blog, not a lot of messages but post nodemanager can help you.

  I hope that's what you're looking for, have a nice day.

  Naour Vijay.

• Old lock to activate ipad asking for Apple ID and password used to configure icloud, which is forgotten. Help?

  My older ipad bouchoirs activation requires Apple ID and password used to configure icloud. I think I know the ID because she tips ***@outlook.com, but not the old password. Help?

  Try https://iforgot.apple.com

  or

  Contact Apple for the Apple ID account security support

  https://support.Apple.com/en-us/HT204169

• Inject an apple ID and PW using the Configurator 2?

  Hi all

  Wondering if a id apple & PW can be added to a profile and deployment using the Configurator 2. Sorry if this has been covered, am new to this and learning and discovery I.

  see you soon,

  Kristian.

  Hello, Kristian,.

  AC2 negates the need to have a configuration of account iTunes\AppleID on each device, can I ask why you wanted to do this, there may be a better way? ipads how are you trying to install? ipad users can add their own iTunes account to download other additional applications then deployed via the configurator.

  Kind regards

  Rick

• After trying to use Fix - It to fix XP does not recognize the USB key, had to go back to the last good configuration and computer charge always VERY slowly. What's past and how to fix it?

  Windows XP SP3 has ceased to recognize a USB flash drive and card reader that he always acknowledged in the past. I tried to use Fix - It to correct the problem. Fix - It is then asked to restart the computer. When the computer is restarted, it would not load. After waiting almost two hours, I restarted with the last good configuration. Then reloaded, it took nearly an hour. Before using the Fix - It, the computer was loading in less than five minutes after a reboot. There a lot of things on it. What can I do now to solve the problem posed by Fix - It and also correct the problem with XP recognizes does not flash drives?

  Hi lental,

  ·         Have what fixit you tried?

  ·         Do you have an error message when you try to start the computer in normal mode?

  ·         What is the brand and model of the computer?

  ·         You're able to boot in safe mode?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  Method 3: Follow the steps in the article to resolve the problem of USB.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  Advanced troubleshooting tips for General USB for Windows XP problems

  For reference:

  How to make a computer faster: 6 ways to speed up your PC

  Slow PC? Optimize your computer for peak performance

• How to use FTP Client and manage the table in BB with JDE

  I'm a newbie to BB development. I have an application in mind, it is a simple ordering application. BB users can send order information to an ftp server. The BB will have some paintings as a customer table and the Order Details table (the two have only a few records). Since cannot use the Services of SDM BlackBerry because the license fees. I'll use JDE to develop the application.  Here are my questions:

  1. What is the best way to manage the tables (read/write)?  RMS, or embedded database (which one?)
  2. is there any ftp client in JDE, api can be used to send data to an ftp server?

  Thanks for help.
  PJ

  The exact figures for RMS sizes are available in this article:

  What is - size restrictions when you use the RecordStore
  Article number: DB-00656
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800724/What_Is...

  So that your information is correct, in 4.6 or later, the per application limit went up to 512 KB.  I don't know if there is a limit on a single record in a record store. We must be careful of the terminology here, it's RecordStore or RMS - is not in BlackBerry terms anyway, PersistentStore (see next).

  The BlackBerry offers two other ways to store data.

  The first and most commonly used are called PersistentStore, and it is an a storage mechanism for objects, I am not aware of any restrictions, other than the memory of the device, about the size of an object that can be stored in PersistentStore.  The advantage with PersistentStore, is that you just persist an object helps you, rather than having to convert it to bytes (serialize) before storing and converting new (him deserialize) after reading it back.

  The second way is to write data using the FileConnection API, and you can for example use this to write data to the SD card in the device.

  EFF and PersistentStore use the flash memory in the device.  You don't have to manage yourself.  You treat all that identical objects, the BlackBerry operating system very cleverly manages to bring your items in RAM and save them in Flash, so you don't have to worry about the type of storage you have.

  I hope this helps.

• In any case to stop WMP using identification tags and simply use file names?

  I do not use DVD or CD more - for the most part, torn from my PC and streaming via WMP on my PS3/TV

  Only problem I have, is that I used the folder & file naming to organize all my media
  in fact I only use the view file on WMP
  but uses WMP ID tags where date and/or filename if not - that seems messy
  In any case to stop WMP using identification tags and simply use file names?
  Or at least WMP can be used to remove unwanted tags - mainly video?
  I tried to remove them one at a time that "seems" to work until I have re-catalog and tags miraculously reappear?

  Tri-pour those who have the same problem - I used Windows to remove the ID tags

  Open the window containing the media files > search * to reveal all the files (save you open folders one at a time)
  Folder view > Details
  Right-click on the column details bar / > more >
  
  Add the 'title' column (this will display the titles (tags) > OK)
  Sort by title window will consolidate all the videos that have set the title/tags
  Select all video files with titles
  Right click > properties > Details >
  
  Choose "Remove properties and personal information" > OK
  
  Choose "remove after this file properties.
  Check "Title" (multiple values) - careful not to tick/delete other important tags
  Ok
  Take a few minutes depending on the number of files
  Sorted
  WMP shows now all my media by filename