Non-functional wireless on Portege M200

Similar Questions

• Non-functional wireless

  Hello

  I own a 630 HP Notebook PC running a Windows 7Home Basic 64-bit operating system. Wireessfunction on the laptop is not functional, I guess as a result of missing drivers. Helpful screenshot of the hardware ID \for network controller are as shown in the image below. Please help.

  Thank you

  Hello

  Please find the link given below to choose the right operating system and then go to the network driver and install the driver, then restart the device & check.

  Link

• How can I find/get drives of Installation of Windows XP Tablet PC Edition for Toshiba Portege M200? Toshiba has none.

  Hello

  Can someone please tell me where and how can I find/get a set installation discs for "Windows XP Tablet PC Edition" for a laptop Toshiba Portege M200/tablet?  Repair laptop customers, but I'm in need the installation discs for tablet PC and touch screen features may work correctly.  I, ve contacted Toshiba and they do not have any OEM system to sell records of restoration, so am now need to find a legal set.  I bought a set of disks that were supposed to be the Toshiba Windows XP table PC Edition, but they were false records.  In any case, if someone could help me I sure would appreciate it.

  disaksen

  Hello, Disaksen,

  If the manufacturer does not, while Microsoft can't as well.

  to obtain a replacement disc, Microsoft's orders to the (800) 360-7561 service, phone and ask that your damaged disk. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:

  http://www.Microsoft.com/worldwide/
   
  How to get the installation discs for Windows XP for installation of boot floppies - download link included
  http://support.Microsoft.com/kb/310994
  Who should download the installation diskettes? You must download the installation diskettes if all the following conditions are met:
  • You install a new version, full of the retail Windows XP.

    Note An upgrade to Windows XP installation does not require the installation diskettes.

  • You have a working CD drive, but you cannot start your computer from your CD-ROM.
  • You can start your computer with a floppy drive.

• Where can I find the drivers for my Portege M200 - I lost my recovery CD

  Where can I find the drivers for my Portege M200? Because there is none on the download page. The only drivers that you might find there are drivers for bluetooth, wlan and I think it is. Have no drivers for my sound card, my network card and all the other stuff.

  I need to download because I really really need to do a fresh install and my recovery disk is lost since the last time I moved.

  Naturally, I called Toshiba and asked if I could get a new one, or if I could download it some how, the response I got was "I'm sorry, neither we nor any of our partners have a.

  And because the windows license is only valid for the Windows XP Tablet edition with SP1 preistalled "Toshiba" and the only way I could get if I had such a drive.

  So the advice gave me support was to buy a new license windows and if I wanted to all work I must review the Windows XP Tablet edition 2005 or something like that.

  But since I already have XP pro license, I decided to install it because I almost never use the tablet properties more. And now when I did just that I can't find almost all the drivers my computer cannot function properly.

  Hello

  > Where can I find the drivers for my Portege M200? Because on the download page, there is no

  What page of the driver Toshiba have you checked?
  I visited the page of European driver of Toshiba and found all the necessary drivers

  Please follow this path and you should get the European driver from Toshiba site:
  http://EU.computers.Toshiba-Europe.com/-> support the Dowloads & -> support home page-> download Driver

• How to add bluetooth to Portege M200

  Hello world
  I recently acquired a m200 without bluetooth and intel 2100 b Wlan functionality. I would like know what I do to upgrade to ensure that both bluetooth and wlan 2200 b/g. The WiFi network should not be a problem, because it is a replacement of a wireless mini-pci network card, but how do I get the bluetooth?

  Thank you

  Kenno

  I m wrong but AFAIK the Portege M200 already supports BT and it must be not upgraded with the add-on of BT.

  Check the bottom of the device, if there is a label of BT

• Portege M200: registering does not voice when you use the handwriting recognition

  When I'm in "tablet mode" using handwriting text recognition that my Portege M200 regularly presents a message to say, he could not save the speech recognition and I have to switch off the microphone if I do not use it. I often use it to take notes of the meeting so there is always background noise. Usually, text is lost when this message appears. The message will also appear when I save.

  How to turn off the microphone while maintaining the functional handwriting recognition please?

  Just a question: what software do you use for text recognition?

• Portege M200 - WLan disappears and cannot be reconnected

  Hey guys,.

  I have a toshiba portege M200 computer laptop with Windows XP Professional and SP2.

  If I turn the WLAN adapt the WLAN network appears once and I can connect and use it without problem.

  If I disable and enable the wireless network adapter or it spend some time the WLAN network is not shown. A restart does not help.

  Can someone tell what is the problem?

  Hello

  How do you disable the wireless network adapter?
  Did you use the switch on the side of laptops?

  Usually the wireless network must be enabled by using the FN + F8 option
  So if you your wifi does not work then you must use the FN + F8 combination keys to activate the WLan again.

  In addition, you should check if you are using the latest driver WLan...

  Welcome mate

• Portege M200 does not detect the Modem PCMCIA card

  I have the Portege M200, when I insert a PCMCIA card (LAN or wireless) the pc detects it ok but if I insert a modem PCMCIA ANY, as a standard 56 k modem, modem card v620 air verizon or a sierra wireless aircard 710, the pc does not detect any, nothing happens when I put it in or out.

  V620 Verizon is the card that I have to make it work as soon as POSSIBLE, others, I used for the test, it seems that modems do not work for some reason any on the PCMCIA.

  any help?

  If the WLAN card manufacturer supplied driver with this card please read manual how to install it on the right track. It is possible that the driver must be installed first.

  Sorry, but my opinion on the laptop PCMCIA port is OK and if you need support try to contact the manufacturer of the card. They should have enough experience with own products.

• Portege M200 won't start CD-Rom USB

  I tried used, pressing C, changing the Bios and F12 boot boot from CD-Rom. None doesn't seem to work, if anyone has any other suggestions I would be grateful.

  Hello

  Unfortunately I can't help you much about it because I do not have this Portege but I found interesting news on the Portege M200 and support for recovery disks:

  The Portege M200 supports the recovery through the BIOS (by pressing 'C') with the USB 2.0 card and PCMCIA (16-bit and Cardbus).
  Readers and following (USB, PCMCIA) controllers have been tested successfully:

  one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  (b) Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi drive, SN: 5362870112
  (c) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
  with a PC Card (16 bit) card, cable II, PCMCIA, Rev.043.242, SN: 18496 043 3999 0343 01093
  (d) Toshiba, PX1055E-1NST, (Freecom drive), SN: 3431490096
  with a CardBus cable II, MAP of BUS, Rev.136, SN: 16693 136 3999 0149 06122

  The drive used in conjunction with the Contoller PCMCIA or USB is not so important due to the fact that the driver in the BIOS should allow the controller first.
  There is a generic CD-ROM drive implemented in the BIOS for the connected player.

  Tested with:
  Toshiba, PX1054E-1NST, (Freecom drive), SN: 151192845
  Card CardBus, cable II, CARD BUS, Rev.136, SN: 16693 136 3999 0149 06122

  The "PC Card controller Mode" settings in the BIOS has been 'Automatic Selection '.
  This means that you have nothing to change in the BIOS, because it is the default value.

  It could happen, to connect the power supply in certain circumstances, for example:
  Battery is charged too less.
  The PCMCIA supplies unless energy location.

  Recommendation:
  If a player is used with a built in battery, please always connect an appropriate adapter.

  For the recovery of USB 2.0, 2 following drives have been tested successfully:
  one) Toshiba, PA3352E-SCD2, CD-RW/DVD-Rom USB 2.0 drive
  (b) Toshiba PA3402E-1DV2, Rev.501, USB 2.0 DVD Super Multi drive, SN: 5362870112
  (c) Plextor PX-W4824 TU, USB 2.0 CD - RW drive

• Vista on Portege M200 - some problems with nVidia display driver

  Hello

  I recently decided to update and perform a clean installation of Windows Vista on my Portege M200, now that Toshiba have released official drivers for this machine.

  Everything works fine, EXCEPT the nVidia display driver. I have the following questions with the driver Toshiba provides for this machine (97.52 version):

  (1) when the screen turns off to save power, the backlight does NOT turn off. Screen turns off but the backlight will stay lit.
  (2) for the recovery of the standby mode, the backlight is OFF. You must use the shortcuts Fn-F6/F7 to change the backlight level manually, that will bring him back.
  (3) external monitor does not work (with command Fn + F5 or nVidia control panel). External display is always blank.
  (3) video playback in WMP is very chopped (a secondary concern for me).

  Is there a chance that Toshiba could finally get a updated driver that would set out the? That would really make this machine fully functional in Vista.

  Thanks in advance for any help or information.

  Null value

  Hello

  > Are there opportunities that Toshiba could finally get out an updated driver?
  I noticed that from time to time new updates of pilot (any series of notebook) are released on the European driver Toshiba page and, therefore, I m optimistic that new updates are available

  But note; usually, various problems can be resolved by installing some patches MS Vista and missing patches.
  Then visit this [MS update website | http://www.update.microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us] and check if all the patches are installed.

  Best regards

• Support HDD on Portege M200

  I bought a refurbished portege M200 all the time, but the hard drive has problems, I'm looking to replace it.
  However no one knows if there are restrictions on which will take hard drives the M200? I'm trying to decide between spending 100 euros for a samsung 160 GB available in a store of the local computer where I can easily go back if it turns out that no work, or order that a 120 GB model from samsung to 62.50 online but where he will be more difficult to return if it does not work...
  I'm a little pressed for cash so if someone can tell me if the samsung 120 GB (HM121HC so this is important) should work, I would be very happy;).

  Hello

  generally, the chipset/BIOS should support HD´s up to 160 Gig, but the problem is that the machine has been delivered with smaller disks, so you will either check the forum on users having similar problems (the search function is great here :)) or you buy the 160 Gig drive, check if it works, return it to the store and buy the HARD disk of 120 Go for half the price.
  I think it's a way without a lot of risk.

  Welcome them

• T61: cover and non-functioning lights switch problem

  My T61 (type 6465) is coming for three years and has recently developed some minor but annoying flaws. The main problem is that the most reliable laptop will remain suspended: closing the lid does not have to be suspended in the first place and if I use Fn + F4 to suspend, it seems that clutching the back edge of the laptop (that you could do to pick it up and put it in a bag) cause him back on the suspension. Accordingly, I found the cell phone on when you remove it from my backpack, even if I was sure that I had hung before storing.

  The other symptoms, is that some of the green lights have stopped working. Namely, the green lights of power, battery, caps lock num and caps lock seem to have stopped running, but wireless, hard drive and activity to suspend lights continues to work. In addition, the orange battery light works very well.

  Other that the system continues to work perfectly: the battery is still good and maintain the load, the power supply charges the battery and powers the system properly. Power management applications show the correct information about the power status of the system (i.e. on current AC or battery-operated).

  I try to work if this is likely to be a hardware failure or a software problem initially. Has anyone seem to similar symptoms, or may suggest that the problem could be based on my description?

  See you soon,.

  -Mark.

  non-functioning lights is most likely a hardware problem.

• ID/faces of the people in the Sierra pictures, pulling up the non-functional names

  Someone knows how to fix this? Is it a new setting I'm missing? I've already sent feedback to Apple.

  Photos, when I come across a photo of a person without a name, I can click on the field "no name" and a list of names appears. In the Sierra, however, the list includes names of new non-functional based on the e-mail addresses that are causing problems with my library.

  For example, if I type my name, I see three suggestions:

  1. my full name, with the thumbnail associated with my Photos 'face '.

  2. my full name with my email from Apple below address and the photo of my Contacts entry

  3. my full name with a secondary e-mail, which I have also listed in Contacts, with no tile

  If I take 1, everything works as usual.

  If I take 2 or 3, Photos makes a new person with just my name. It does not automatically fill in the rest of my name. I find myself with two entrances of the person, one with my full name and one with my name. I then merge these. This happens with all the people, not just me.

  I have the same problem. When I want to manually add a face without a name/person, I get very often 2 proposals:

  (1) the person sought with the profile photo, the first name and family name. If a picture is displayed, this means that I have already assigned photos to this person.

  (2) the same person, with or without a profile picture, with name, surname and e-mail. This proposal seems to come from my contacts, because it shows the same profile photo and mail the address I have for this person in my contacts.

  If I add the photo to the contact person, the person is added as a person in Photos. But with only the name, not the name, which is a little ridiculous, especially when you are systematically adding people and having many with the same name.

  I merge the two to get back 1 "individual" in photos, with first and last name (first and last).

  So somehow Photos is not capable of matching 'people' in photos to anyone in my contacts list. Even when you merged the two and said Photos this way they need to be put in correspondence.

• Portege M200 display issues

  Hello. I just got my new M200 tablet pc, but the display is sluggy compared to my screen Tecra S1. Looks like there is something on top of the display Assembly that makes sluggy image and the colors too. This can be seen especially on white background. Is there a plastic to remove, because I looked and I think he does not like or is it normal for the tablet PC?

  Hello

  The Portege M200 LCD screen is covered with a protective mask. This protective film is integrated into the LCD mask to prevent scratches on the LCD Panel - caused from dirt or handling - caused by the use of the pen.
  You can't compare these two screens (Portege Tecra) for Portege is tablet pc with the protective mask and Tecra has a very different display with other properties.

  Good bye

• From a Portege M200 battery mode screen

  Hello, first sorry for my English, I am not totally bilingual.
  So I got a Portege M200, with the model number: PPM21E-02QFZ-FR, serial number: 55893043G

  This work of the computer laptop but fine * when I unplug the AC adapter black screen come *, when I reconnect light screen again (he continues to work, but without screen because it serves not next).

  I have try the Fn + F5 combination, not worked, try to change performance settings in windows, without change.

  When I go into the BIOS I can make it happen this problem even if the AC is plugged by changing the value of the field 'battery saving mode' to 'full power' to the other (when I change the screen turns off the coast).

  do you know how to fix this?
  Thanks in advance

  > This laptop work well, but when I unplug the power of the screen in black, when I reconnect light screen again (he continues to work, but without screen because it does not fuel nearby).

  Sorry I mate m afraid I did not understand it correctly.
  If you unplug the AC adapter, the screen turns off.
  But what happens if the power adapter is connected again? You say that screen lights up again, but then said you that you can work but no screen.

  So I'm confused now

  In my opinion, you should check the Windows power options.
  Usually, if the AC adapter should be disconnected, the laptop will switch to another power plant (battery mode).
  In my opinion, you should check the settings of the power station, which is used if the AC adapter is disconnected.