Configuration Application Porvider Services (APS) for SmartView V11 - Linux

Similar Questions

• How to change the password for the service account for a specific application?

  PC is used by some employees at the workplace.

  A user has installed an application on this PC, all users can use this application with user password this person who has installed.

  After that the user who has installed an application has changed the password, the Application is locked.

  I heard that need to change the password of the service account for a specific application.

  How to do?

  Advice me please.

  Thank you

  It depends on the application itself. You could check the FAQ of the application or to re - install the application and ensure that it is available for all users of this machine.

• Windows detected your registry file is still in use for other applications or services - IIS 7 w3wp.exe

  I use a new computer with Windows 7 to run tests of endurance for a WCF application.
  I see that the w3wp.exe is discharged to 2 - 3 times a day:

  Windows detected your registry file is still in use for other applications or services. The file will be unloaded now. Applications or services that keep your registry file may not work properly thereafter.

  DETAIL-
  Register User 6 handles is escaped from \Registry\User\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415:
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \registry\user\s-1-5-82-3006700770-424185619-1745488364-794895919-4004696415-cles
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows NT\CurrentVersion key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Explorer key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections key
  5060 (\Device\HarddiskVolume2\Windows\System32\inetsrv\w3wp.exe) process has opened \REGISTRY\USER\S-1-5-82-3006700770-424185619-1745488364-794895919-4004696415\Control Panel\International key

  I run the tests as an administrator.
  This continuous restart of IIS prevents my run endurance tests.

  I am the only user of the administrator on this computer, no other applications running on the computer.

  I found similar questions and I tried their solutions without success.
  http://blog.Tiensivu.com/Aaron/archives/1909-OCS-2007-R2-services-hang-at-starting-on-reboot-with-Server-2008.html
  http://blogs.msdn.com/b/AsiaTech/archive/2010/08/05/load-user-profile-in-IIS-7.aspx

  Thank you.

  Hello

  If you use IIS, it would be better to post the same question in the IIS forums to get help.
  http://forums.IIS.NET/

• Why can't I configure the POP/IMAP mails for my Muse site in Business Catalyst? I don't have the option "use this service for e-mail as hosting the Web site" under Advanced options

  Why can't I configure the POP/IMAP mails for my Muse site in Business Catalyst? I don't have the option "use this service for e-mail as hosting the Web site" under Advanced options.

  Is this due to my hosting Plan? Appreciate the answers.

  Your site is a CCM that is located on a WebBasics plan (this plan does not e-mail hosted on Business Catalyst).

  If you want to create the email addresses on this site, you will need to configure your mail elsewhere server and configure the MX records on your site to point to the external mail server.

  If you want to use the hosted Business catalyst e-mail services, you should use a WebBasics + or superior siteplan. To upgrade your free CCM site, access administration area of your site-> Site Management-> upgrade now-> choose the desired site plan and billing frequency-> Add personal and credit card details-> Submit.

  Please see this article on setting up email on your site of BC accounts: http://docs.businesscatalyst.com/user-manual#! / settings/mail electronic-users of the site -

  For the establishment of the records point to the external mail server, see http://docs.businesscatalyst.com/user-manual#! / settings/email-users/creation-boxes of reception-for-your-users of the site

  Kind regards

  Laurant

• Windows detected your registry file is still in use for other applications or services.

  I get this warning in the case where the application of visualization of the newspaper.  How can I solve the problem?

  I get this warning in the case where the application of visualization of the newspaper.  How can I solve the problem?

  Check this box

  http://social.technet.Microsoft.com/forums/Windows/en-us/7e5654ef-5c02-4f25-b9da-2024c8e41f00/Windows-detected-your-registry-file-is-still-in-use-by-other-applications-or-services-the-file-will

• Provision for Smartview

  I use Windows 2003 Server SP2 with MS SQL 2000. I have configured the Shared Services components and Essbase. Adds 3 users in the Regional service Console and type administrator access has been given to them and then re-added 1 more user with access user ie) create and delete applications. Then, externalize shared service Essbase users. He managed. I can connect 3 users who have administrative access to the SmartView. But could not connect another 1 user more who accessed a user.
  
  What is necessary for users to access the SmartView. Please notify.
  
  --
  Thanks in advance
  SM

  If they can see all of the applications, then there must be other supply on the user, maybe they are part of a group that has a supply more on this subject.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Oracle 11G - configuration of the Service CARS

  Hello
  I read a lot of documentation about oracle services and I have ok understand how they work. However, I have a general question about using Oracle RAC configuration services. For example, if I have a 2 node RAC 11 GR 2 on a Linux Redhat Server oracle. I have an application that connects to a service that I created. I create the following service.
  
  srvctl add service d ORCL_RAC s app_service - ORCL_RAC1, ORCL_RAC2 r
  
  The tnsnames contains:
  
  APP_OLTP =
  (DESCRIPTION =
  (LOAD_BALANCE = ON)
  (FAILOVER = ON)
  (ADDRESS = (PROTOCOL = TCP)(HOST = server01) (PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP)(HOST = server02) (PORT = 1521))
  (CONNECT_DATA =
  (SERVICE_NAME = APP_SERVICE)
  (FAILOVER_MODE =
  (TYPE = SELECT)
  (METHOD = BASIC)
  (RETRIES = 20)
  (TIME = 1)
  )
  )
  )
  
  My questions are the following:
  
  (1) when I do a "srvctl status service d ORCL_RAC", I see the service that is running on both nodes of the RAC? Or he runs only a single node, and then it will switch to the other if necessary?
  (2) if I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 runs only on node1 and RAC_SRV2 is only running on Node2. There are two applications that share the same database, an application uses RAC_SRV1 and the other application is the use of RAC_SRV2. Am I right to think that there is no failover available here? If node1 goes down, the connection to RAC_SRV1 application will be not able to connect to the right of node2?
  (3) in the case of the scenario in question 2 above, it would be better practice to simply create a service and have the two applications connecting to a service? Could configure NEB service to point connections of an application with the Node1 and node2 another application?

  (1) when I do a "srvctl status service d ORCL_RAC", I see the service that is running on both nodes of the RAC? Or he runs only a single node, and then it will switch to the other if necessary?

  You can see how it works on both nodes.
  Use a option in srvctl (a list of available instances to which the service switch when the database's administrator managed).

  http://docs.Oracle.com/CD/E11882_01/RAC.112/e16795/srvctladmin.htm#i1008562

  (2) if I have a RAC environment where I see two services created (RAC_SRV1 and RAC_SRV2). I see that RAC_SRV1 runs only on node1 and is RAC_SRV2 > only running on Node2. There are two applications that share the same database, an application uses RAC_SRV1 and the other application is the use of RAC_SRV2. Am > reason to think that there is no failover available here? If node1 goes down, the connection to RAC_SRV1 application won't be able to connect to node2 > right?

  It depends on the configuration of your service. Check it out by srvctl config

  (3) in the case of the scenario in question 2 above, it would be best practices simply create a service and have the two applications connecting to that > service? Could configure NEB service to point connections of an application with the Node1 and node2 another application?

  better create two services, one for each application with specific and other nodes in the available list.

• CF8 will of Application Server Service does NOT start

  I came across this error:

  means: Java heap space

  and after researching it, it seemed to me that I should to the maximum segment size on the page Java/JVM, so I increased my heap size max to 1044 MB of 512, via the CF administrator, I also added the maxPermSize = 256 m.  Then I restarted the server, but the Application Server service will not start.

  I opened home/runtim/bin/jvm.config and define the segment of memory of 1024 size, restart, the service still does not start.

  Set the size of heap max 512 and removed maxPermSize, server rebooted, service still does not start.

  A value equal to the java.args set :-serveur-Xmx256m-Dsun.io = false .useCanonCaches - xx: MaxPermsize = 128 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Restarted, the service still will not start.

  Someone at - it ideas?

  The error that I get trying to start services is:

  Windows could not start the server to ColdFusion 8 applications on Local computer.  For more information, see the system even log.  If it is a non-Microsoft service, contact the service provider and therefore the 2 service-specific error code.

  Thank you!

  If you have a backup of the file config before you made the changes, restore this file.

  If this isn't the case, it seems that you have a few typos and extra spaces in your arguments.  For example "-xx" should be capitalized and '{application .home}' has a space after 'application' that shouldn't be there.  Note that the JVM arguments are case-sensitive.

  Here are the arguments for a working copy of the CF8, use at your own risk and your backup configuration file before making any changes.

  -Server-Xmx512m - Dsun.io.useCanonCaches = false - XX: MaxPermSize = 192 m - XX: + UseParallelGC-Dcoldfusion.rootDir={application.home}/... /-Dcoldfusion.libPath={application.home}/... / lib - Dcoldfusion.classPath={application.home}//lib/updates, {application. Home} /... / lib {cation.home} / app... /Gateway/lib /, {application. Home} /... / wwwroot/Web-INF/Flex/Jars, {application. home} /... / wwwroot/Web-INF/cfform/Jars

  Beware of the forum software sometimes adds extra space to the text that is displayed here.

• How to use the same services-config for servers the and remote.

  My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.

  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = 'amfphp-flashremoting-service' service
  Class = "Flex.Messaging.services.RemotingService"
  messageTypes = "flex.messaging.messages.RemotingMessage' >"
  
  < destination id = "amfphp" >
  <>channels
  < Ref channel = "my-amfphp" / >
  < / channels >
  Properties of <>
  < source > * < / source >
  < / properties >
  < / destination >
  < / service >
  < / services >
  <>channels
  < channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
  < / channel-definition >
  < / channels >
  < / services-config >

  I think the problem is the line

  
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "

  but I don't know how to use the same services-config for servers the and remote.

  I'll back up a bit.

  Breakpoint URLS are defined as follows in the services - config.xml:

  https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure

  The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.

  If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.

  In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.

• Should what configuration of iMac I look for to achieve the app development?

  Looking for ideas on cost-effective configuration of office people as for application developers.

  Current processors and disk capacity will be OK for pretty much anything - you'll be happier with more memory and large screens.

• system is not able to run the Apple Application Support service

  I can't install itunes on windows 7 32 bit. Any suggestions on Apple Support do not work. The system is not able to run the Apple Application Support service. Any suggestiones?

  Can you post the error message you get when you try to install or launch iTunes?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Need to disable the service manager for down load adobe

  Need to disable the Service Manager for down load adobe

  Original title: program compatibility Application Applications App Apps GaGames Legacy Crash crashes hang hangs
  Moved from feedback
  Internet Explorer version unspecified - unspecified BONES

  Hello

  What Adobe program you are trying to download?

  Flash Player
  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

  Adobe Reader
  http://helpx.Adobe.com/Acrobat/KB/quick-fix-install-download-reader.html

  Don

• How to configure the fax service

  Fax

  do I need a phone number to set up the fax I use dsl

  Hi waawa1951,

  Yes, you will need a phone and number phone of fax on the installation computer.

  See the links for more information below.

  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  How to send a fax in Windows XP

  http://support.Microsoft.com/kb/306657

  Use your computer to print, scan, fax

  http://www.Microsoft.com/windowsxp/using/Setup/hwandprograms/printfaxscan.mspx

• Please tell me about the configuration of foglight 7.0 for Hyper-V 2012

  Hello

  I'm looking for a configuration of foglight 7.0 for Hyper-V 2012.

  But I encounter an error that I do not understand.

  This is error message below.

  2013-08-09 10:13:00.599 ECHO WARN [HV0 - WIN - N85SESVGPEH.foglight.com AgentStatusService] com.quest.glue.core.agent.StateChangeRequestProcessor - could not acquire lock necessary for travel agent HyperVAgent/5.6.10/HyperVAgent/HV0-WIN-N85SESVGPEH.foglight.com to ask the State DATA_COLLECTION_FAILED. The agent may be in an unexpected state. java.util.concurrent.TimeoutException: impossible to acquire the WRITER lock to the HyperVAgent/5.6.10/HyperVAgent/HV0-WIN-N85SESVGPEH.foglight.com agent because it is owned by another thread (s).  One or more of these threads can be hung or an impasse. to com.quest.glue.core.agent.AgentInstance.acquireAgentLock(AgentInstance.java:1642) to com.quest.glue.core.agent.StateChangeRequestProcessor.setAgentStateUnderLock(StateChangeRequestProcessor.java:92) to com.quest.glue.core.services.AgentStatusServiceImpl$ 2.run(AgentStatusServiceImpl.java:77) to java.lang.Thread.run(Thread.java:662)

  Please find attached the file located each configration of my environment.

  WVE 7.0 is windows 2008.

  Hyper-V is windows 2012 with AD and Key Distribution Center.

  Please help me.

  Best regards

  Hello

  If you create a pension deal since there are a few things that need to be checked in your environment to determine the root cause of the problem, it would be more helpfu.

  Sincerely