How to configure the fax service

Similar Questions

• How to configure the FAX

  My 4622 Officejet is in my home office with a desktop Gateway under XP SP3.  Centurylink DSL service.  Beautyshop of the wife in another part of the House has a ring distingtive (2 plates) but with a different incoming phone number using the same telephony hardware throughout the House.  There is an answering machine which takes up after 4 rings either at home or beautyshop number, but the answering machine isn't near the HP 4622.  Every phone in the House extensions are homeruns back to punch to the bottom of the card.   So, I have problems to set up the new printer FAX functionality.  Hope that there is help out there and thanks.

  Here's what you need to do. You can almost ignore the fact that you have an answering machine from your fax line has a distinctive ring. Set on the printer fax to answer after 2 rings and answer only the distinctive pattern of the ring you have. I'll go over how to do each thing below.

  1. press the button on the key on the front of the printer.
  2. press the button next to the down arrow until Fax Menu is the choice next to OK.
  3. press the button next to OK.
  4. press the button next to the down arrow until Fax from the basic settings is the choice next to OK.
  5. press the button next to OK.
  6. press the button next to the arrow down to rings before answer is choice next to OK.
  7. press the button next to OK.
  8. press the button next to the down arrow until 2 is the selection.
  9. press the button next to OK.
  10. press the back/return button once.
  11. press the button next to the down arrow until the advanced fax setup is the choice next to OK.
  12. press the button next to OK.
  13. press the button next to the arrow down until a special ringtone is the choice next to OK.
  14. press the button next to OK.
  15. press the button next to OK.
  16. press the button next to Yes.
  17. press the button next to the down arrow until you see Double ring next to OK.
  18. press the button next to OK.
  19. press the home button.
  20. plug the phone cord supplied with the printer to the appropriate port on the back of the printer. Make sure that you use a DSL filter.
  21. test the function of HP return Fax Server Fax fax. 1-888-473-2963

• How to configure the TOUUPER service to dmconfig.xml Tux

  Hello
  My requirement is that we need to send messages to tuxedo, Tuxedo to another server machine, I had only the ip address and port, is enough that information to develop
  
  Adapter resources JCA to my server application, is there any what Tuxedo server information we must configure dmconfig.xml configuration, if any what are configuration items, currently I am specifying dmconfig.xml as, iam unable to get a connection to tuxedo, please help me.
  
  <? XML version = "1.0" encoding = "UTF-8"? > < TuxedoConnector >
  < LocalAccessPoint name = "JDOM" >
  < AccessPointId > JDOM < / AccessPointId >
  172.28.62.10:17800 < NetworkAddress > < / NetworkAddress >
  < / LocalAccessPoint >
  < RemoteAccessPoint name = "TDOM1" >
  < AccessPointId > TDOM1 < / AccessPointId >
  10.10.132.105:5562 < NetworkAddress > < / NetworkAddress >
  < / RemoteAccessPoint >
  < SessionProfile name = "profile_1" >
  < ConnectionPolicy > ON_STARTUP < / ConnectionPolicy >
  < CompressionLimit > 1000000 < / CompressionLimit >
  < / SessionProfile >
  < name of session = "session_1" >
  < LocalAccessPointName > JDOM < / LocalAccessPointName >
  < RemoteAccessPointName > TDOM1 < / RemoteAccessPointName >
  < Nom_de_profil > profile_1 < / ProfileName >
  < / session >
  < import name = 'TOUPPER' >
  < NomDistant > TOUPPER < / NomDistant >
  session_1 < session_name > < / session_name >
  RoundRobin < LoadBalancing > < / LoadBalancing >
  < / import >
  < / TuxedoConnector >

  Hello

  1) allow Tuxedo server-side to set DYNAMIC_RAP = YES and it reboot
  (http://docs.oracle.com/cd/E26665_01/jca/docs11gr1/users/jca_usersguide.html)

  (2) get the domain Tuxedo NAME, IP address and the PORT

  (3) ensure that the TOUPPER is exported on the side smoking server.

  (4) then you only need to define a single element, remoteAccessPointSpec, in ra.xml as below
  (by replacing these :/domainId = to the real value)

  
  com.oracle.tuxedo.adapter.TuxedoClientSideResourceAdapter
  
  remoteAccessPointSpec
  java.lang.String
  //:/domainId=
  
  

  Kind regards
  He Xu

• Try to install the fax service and asking for xp sp3 cd, but I do not have it.

  I upgraded my computer to XP SP3 on the internet and now I am trying to install the fax service, but it must be the SP3 files. How to get these files.

  Hello

  1. could you give us the exact error message?
  2. where did you downloaded service pack 3?

  You must have the Windows XP installation disc to install the fax service. See the article below for more information.
  How to enable and configure the fax service in Windows XP
  http://support.Microsoft.com/kb/306550

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to add a fax services if I do not have a CD?

  I use Comcast cannot send a fax because of digital, I should be able to send it via the PC

  Hi DarcyDWL,
   
  Here are some articles that you might find useful:
  How to send a fax in Windows XP
  How to enable and configure the fax service in Windows XP

• The Windows fax service cannot start because there is no such thing as a privilege in the fax service account.

  I'm trying to set up Windows Fax and Scan to store faxes "received" in a folder encrypted (EFS). (I use Windows Vista Business).

  The fax service will not start if it set to log on as a "local system account", but faxes are stored with the certificate of local system and inaccessible to other users.

  To work around this problem, I tried to configure the Fax Service to log on under a specific user account. However, after that and try to re - start the Service I get.

  Error: 1297 as a service privilege is needed to function properly does not exist in the service account configuration.

  One of the services that begins with the "local system account" does not automatically start with a normal user account and if you get the message.  Most of the services are designed to start with the local system account and not a special user account (actually, not on my system using a specific user account for services).  I think that part is OK and you must return it to the local system account (so eliminate the error message and remove that as a problem to solve).

  I think the question may also be a permissions problem in the user access to the fax.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have: http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista: http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/.  To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article: http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To resolve this problem with folders, appropriating the files or the drive (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  You can change now switched to read-only (even if the main folder indicates that they are always read-only - you can access yourself as the owner).  You can keep them in read-only to other users, customers and administrators even (although they can support themselves and access, if they wish, and it is really not that you can do to stop it except protect the file with a password by using a 3rd party product.)  Here is more information on the ownership of a file or a folder: http://www.vistax64.com/tutorials/67717-take-ownership-file.html.  To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article: http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  If that is indeed a problem of certificates (and it seems there is a but looks like he takes care of himself with the Wizard), then we must make the certificate available to all users of the system (from where it is now stored) - and I think I saw how to do this in secpol.msc.  Here is some information I found on EFS secpol.msc in the public key policies (you can get it by entering this in the area of research and the antering and then a double click on the program icon that appears) where you would put in place.

  --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  The Encrypting File System (EFS) is an encryption technology of base file used to store the encrypted files on NTFS file system volumes. Encrypted files cannot be used unless the user has access to the keys needed to decrypt the information.

  Encryption is transparent to the user that encrypted the file. This means that you don't have to manually decrypt the encrypted file before that you can use. You can open and edit the file as you normally would. Once you encrypt a file or folder, you work with the encrypted file, or a folder like you do with any other file or folder.

  The use of EFS is similar to using permissions on files and folders. Both methods can be used to restrict access to the data. However, an attacker who gets physical access unauthorized to your encrypted files or folders will be prevented from reading. If the intruder tries to open or copy your encrypted file or folder, he or she receives an access denied message. Permissions on files and folders do not protect against unauthorized physical attacks.

  You encrypt or decrypt a folder or file by setting the property of encryption for files and folders, as you define another attribute such as read-only, compressed, or hidden. If you encrypt a folder, all files and subfolders created in the encrypted folder are automatically encrypted. It is recommended that you encrypt at the folder level.

  You can also encrypt or decrypt a file or folder using the Cipher command.

  When you work with encrypted files and folders, keep in mind the following information:

  • Only the files and folders on NTFS volumes can be encrypted. However, you can use Web distributed authoring and versioning (WebDAV), which also works with NTFS, to transfer files in encrypted form.
  • Files or compressed files can also be encrypted. If the user marks a file or folder for encryption, that file or folder will be uncompressed.
  • Encrypted files are decrypted if you copy or move the file to a volume that is not an NTFS volume.
  • Moving files unencrypted in an encrypted folder will automatically cause these files to be encrypted in the new folder. However, the reverse will not automatically decrypt files. The files must be explicitly decrypted.
  • Files marked with the system attribute cannot be encrypted, nor can files in the system root directory structure.
  • Encrypt a file or a folder does not protect against the removal or the list of files or directories. Anyone with the appropriate permissions can delete or list encrypted folders or files. For this reason, the use of EFS in combination with NTFS permissions is recommended.
  • You can encrypt or decrypt files and files located on a remote computer that has been enabled for remote encryption, but, in this version of Windows, the data that is transmitted over the network by this process is not encrypted. Other protocols, such as Secure Socket Layer/Transport Layer Security (SSL/TLS) or Internet Protocol security (IPsec) must be used to encrypt data while they are transmitted over the network. (You can also use WebDAV, as described in the first bullet, to pass the file in encrypted form.)

  EFS policy settings

  You can use Group Policy to configure a number of EFS settings.

  Allow or disallow the EFS

  You can choose to allow or prohibit the use of EFS altogether. If you do not configure the policy settings for EFS, it is OK.

  The EFS options

  If you choose to allow EFS, you can also select a number of options, such as whether to automatically encrypt the Documents folder of the user, to require a smart card for use with EFS, to cache keys created based on a smart card, to enable the encryption of the Windows page file, or to notify users to make the backup copies of their encryption keys.

  EFS certificate

  EFS encryption is based on the pairs of keys associated with certificates. In most managed environments, the certificates are issued by a certification authority (CA) running in the field. Users can automatically be issued a certificate from the CA without manual intervention. EFS settings include a drop-down models of certificates that are available in the field list so that you can specify which certificate template to use for autoenrollment.

  Note
  	The list includes all the models of certificates, present in the field. An administrator must configure the CA so that certificates can be issued. Some displayed certificates are not available.

  In cases where a certificate cannot be issued by a certification authority, EFS can use a self-signed certificate created on the local computer (there is a section in secpol.msc to create a certificate). You can choose to disable this functionality and specify a default key length.

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------

  I don't know if that helped or not.  Please let us know and be specific about what other questions, you may have because I don't know what you mean and which is still confusing (and to be honest, I am a little confused at this point - it is not an easy task to accomplish).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• Having trouble getting the Fax Service to save faxes in encrypted EFS of the user.

  I configured the widows fax service to save faxes received in encrypted in the user folder. So that the files are saved, probably, with the certificate of the user, I configured the Fax Service to log on as a specific user.

  However, after the change is made and try to start the Fax Service I receive,

  "Error 1279: a privilege that the service needs to operate properly does not exist in the service account configuration."

  Watch the event log: event ID 7000, qualifier 49152.

  One can tell me what privileges are required by the Fax Service, and how to add them to the user account. (I made the account to an administrator account and still get the above error.)

  Also, if anyone knows another way to achieve the same goal, would be much too.

  Any suggestions will be greatly appreciated.

  Hi Vista_mb,

  • Your computer is connected to any domain?

  Read the article "some services do not start and you receive an error message after join you a Windows Vista computer to a Windows 2000 domain:"1279, a privilege that the service needs to work properly there is no" http://support.microsoft.com/kb/940668 "

  If your computer is linked to the domain, you can also post your queries on technet community: http://social.technet.microsoft.com/Forums/en/category/windowsvistaitpro/

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to change the return service for the configuration of pair of Eve Active

  I created the pair of Eve Active (no Clusterware) with service return TWOSAFE RETURNS the value.
  

  create active standby pair
   dbactive on "server1",
   dbstandby on "server2"
    return twosafe ;

  How can I change of RETURN TWOSAFE changed to RETURN RECEIPT?
  
  Thanks in advance for the help.
  
  Kind regards
  Gary

  You must configure the return Service to manage failures of network/timeouts. See 'Establishment' will return failure political failure/recovery service here (http://docs.oracle.com/cd/E21901_01/doc/timesten.1122/e21635/design.htm#TTREP342)

  The Return Service clause allows you to set up when the transaction must be validated locally where the replication agent does not receive any acknowledgment of the intelligence officer.

  -DISABLE the RETURN sets the number of timeouts before it stops waiting for the Subscriber to answer.
  -You can set attribute SUSTAINABLE COMMIT to commit the transaction with Commit sustainable is set on the current database, after RETURN of SERVICE is disabled.

  At the application level, you can also control what you want to do if there is a timeout, you can set the LOCAL ACTION of COMMETTRE to VALIDATE or NO ACTION. If you want the agent of rep to commit the transaction locally, it is transparent to the application code. If you set NO ACTION, the application
  may decide whether to re - issue the call validation or roll back the transaction.

  The link to the above documentation has more details.

  Susan

• I try to activate the Fax Service. He keeps asking me: a CD with 'Windows Professional Service Pack 3 '.

  I try to activate the Fax Service. He keeps asking me: a CD with 'Windows Professional Service Pack 3 '. Of course, I don't have such a CD. When I try Microsoft doewnloading they tell me this service pack is 64-bit, but my computer is running 32-bit. Anyone has an idea how to get around this and activate my fax service?

  Thank you
  original title: activate the Fax Service.

  XP is expensive now, or maybe you can get a legal CD of a person. You won't have to reinstall you can move the license to your computer, and then install the fax from the CD. You will have also the CD incase never reinstall you or need something else of it.

• I am runing vista and do not know how to use the fax machine

  I am runing vista and do not know how to use the fax machine

  Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes.  Navigate the reference links on the right for more information on how to send faxes and other information.  If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative.  After that, you must be an expert on this subject.

  Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.

  Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium.  In the latter, you need a 3rd party program.  If this is the case, here are some options:

  With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:

  Not available in Vista Home Premium Basic FAX. It is available in complete edition,
  Extreme and business.

  You might want to consider Snappy Fax at a low cost:
  http://www.snappysoftware.com/

  or the free version of BVRP:
  http://www.usr.com/BVRP/bvrp.asp

  or a full BVRP Classic Phone Tools 9: $29.90
  http://www.shop.Avanquest.com/USA/PR...S_CPT_homepage

  Look screen kinda gross but the product Snappy fax
  actually, is quite rich in features and works very well. BVRP also works very well,
  screen looks a bit better. Other that that, there are minor differences
  performance between the two.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• my windows pc very experience 1, I am embarressed to admit that I can not understand how to configure the windows/outlook e-mail system. This pop and smtp or what ever Q was, I still can't understand.

  I'm unable to set up Outlook, or now called windows mail, I think. but for the life of me I do not understand how to configure the e-mail program that comes with now it windows Vista 64 that came on my new pc.  can someone please?  Thank you

  Windows Mail is/was not Outlook.

  Windows XP e-mail program called Outlook Express.

  Outlook is a part of the office.

  Windows Mail in Vista is the replacement of e-mail for Outlook Express (XP) program.

  Read this section on how to set up Windows Mail in Vista:

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to use the same services-config for servers the and remote.

  My flex project works very well using the bottom but when I download my flash on the server I do not work, all the files and related paths are the same execpt remote is a linux server.

  <? XML version = "1.0" encoding = "UTF-8"? >
  <>services-config
  < services >
  < id = 'amfphp-flashremoting-service' service
  Class = "Flex.Messaging.services.RemotingService"
  messageTypes = "flex.messaging.messages.RemotingMessage' >"
  
  < destination id = "amfphp" >
  <>channels
  < Ref channel = "my-amfphp" / >
  < / channels >
  Properties of <>
  < source > * < / source >
  < / properties >
  < / destination >
  < / service >
  < / services >
  <>channels
  < channel-definition id = "my-amfphp" class = "mx.messaging.channels.AMFChannel" >
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "
  < / channel-definition >
  < / channels >
  < / services-config >

  I think the problem is the line

  
  " < endpoint uri = ' http://localhost/domainn.org/AMFPHP/gateway.php "class="flex.messaging.endpoints.AMFEndpoint"/ > "

  but I don't know how to use the same services-config for servers the and remote.

  I'll back up a bit.

  Breakpoint URLS are defined as follows in the services - config.xml:

  https://{server.name}:{server.port}/{context.root}/messagebroker/amfsecure

  The meaning of each of the tokens is clearer when we see them as part of a complete url. If your context root is set to http://localhost , then I have no idea how your application runs in any environment.

  If you leave the server.name and server.port chips in your configuration file, then they will be replaced when executing according to the location from which your application is served. However, the context.root token is replaced at the time of the compilation based on the value that you specify in Flex Builder or when calling mxmlc.

  In order to reuse your file services - config.xml, you must use the same context-root on your development environment and to your deployment environment.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• OfficeJet OfficeJet 7612: 7612 - how to set the fax to send only?

  OfficeJet 7612 - how to set the fax to send only? No need to get into the machine. Thank you, Noemi

  Hello

  If you go only to send faxes with this product, you should not disable the receive function to operate correctly. Are you problems with the part of fax machine or you just think you can turn this feature off?

  Thank you!!