configuration dll when the parameter is of type STRUCT

Similar Questions

• How to limit navigation directly via the URL when the user tries to type the page number and access this page in ORACLE APEX 4.2

  Hi all

  I developed an application where I have 6 pages and 5 tabs and based on the user role I posted the tabs for the user to access these pages.

  But when the user, who doesn't have access to the particular page (say, page 2), but still the user can navigate to it directly by typing the page number in the URL.

  I want to avoid such scenarios.

  eg: http://Apex.Oracle.com/f?p=110:2 , when the user type this in the address bar, it navigates the user to this page even if this particular user does not have access to this page.

  How to prevent the user to navigate through the URL, if the user tries to navigate directly through URLS rather than tabs, I have to give the error message.

  Version: ORACLE APEX 4.2

  Thank you

  Good reading this recent post

  Re: Authentication at the Page level

  All links to a page and the page itself must be secure.

  You can also consider the protection of session state to prevent tampering of the URL.

• Autofocus TextField when the keys are of type (for Qwerty devices)

  I have a TextField will be used for filtering a list of items. For the Q10/5 etc I would like that it if the focus was automatically to the textfield if all keys are typed (and the keys to the first and following would go there).

  I have this work by adding a KeyListener on the container Page and when I get the keyPressed signal I do:

  onKeyPressed: {
     if (!field.focused) {
        field.requestFocus();
        field.text = event.unicode;
     }
  }
  

  It works, unless the user is able to type two keys quickly enough, in which case the first key goes in the field, but the second is lost.

  I checked that the routine above is actually executed twice, once for every strike, and that field.focused returns true for the second sequence of keys, so this seems like a bug. Anyone have ideas on this?

  If someone else has implemented something similar, could test you with two quick strikes in very quick succession (probably<50ms apart)="" and="" see="" if="" you="" get="" the="">

  My original post on this: http://supportforums.blackberry.com/t5/Native-Development/Auto-focus-TextField-when-user-presses-key...

  I don't know why I created a second, other than that I must have forgotten that I had done the first time where I started this one. I'll close this as an answer, but looking back at the other for the main thread.

• defective module: kernelbase.dll when the application is run as a normal user

  Hello

  I'm trying to run a software under Windows 7 32 bit and it crashes when I run. However, it works fine when run as an administrator.

  In case the Viewer, I get the following information:

  The failing application name: ClientNT.exe, version: 1.30.0.780, time stamp: 0x4c052597

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdaae

  Exception code: 0xe06d7363 fault offset: 0 x 00009617

  ID of the process failed: 0xedc

  Start time of application vulnerabilities: 0x01cb01a1f7e77942

  The failing application path: C:\xxxxxx\Programs\ClientNT.exe

  Path of the failing module: C:\Windows\system32\KERNELBASE.dll

  Report ID: 36018391-6d95-11df-8e27-001999672c6b

  This could be the cause of this problem? Why the short application fine when run as an administrator?

  Thanks in advance,

  Polys

  PS. I apologize for not being able to provide the name of the application.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for applications in development on MSDN. Please post your question in the MSDN forum.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• asks to reinstall hpzjrdoi.dll when the computer starts?

  How to install this to get rid of it, when I start computer. Do I need this on my computer. How can I get rid of it if I do not need. Thank you, Charles Harrison
  Operating system: Windows XP

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.
  http://www.precisesecurity.com/how-to/HT-smodewnet.htm
  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• State of resources shows that configured even when the task is rejected

  Hello
  We have 5 tasks for the provision of resources. The last task is rejected, but still the resource status in service instead of Provisioning.
  In each task, I traced the answer as below:
  C - put in service
  Commissioning of R
  
  Please let me know if I'm missing something.
  
  
  Thank you.
  
  Published by: user11957197 on October 24, 2012 04:22
  
  Published by: user11957197 on October 24, 2012 04:22

  If you set your configuration of the task preceding / dependants, you should only need to put State set up on the last task then. In this way, is not in a State of service until the end.

  -Kevin

• How to fix error: C:\Users\TEMP\AppData\Local\PLAYTO~1\Updater.dll when the browser crashes too often

  I get the message every time my browser hangs and stops... too frequently to start or do anything accomplished. I need to know how to solve this problem as soon as possible.

  Download AutoRuns from Sysinternals (http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx). And search for C:\Users\TEMP\AppData\Local\, right-click on it, & remove it. Restart your PC. Still get the same error message now?

• Change the conditions when the parameter is null

  I am building an Apex application where the client will fill out a form to get the data. I want to know if there is a way to modify the WHERE clause based on the selections of the customer allows shaped.
  
  Here is the scenerio:
  
  The user form has 3 fields, which should all be able to be null to return all results. We will call them P10_A, P10_B and P10_C
  
  If the user selects a value for all three, where clause is:
  
  where column_a =: P10_A
  and column_b =: P10_B
  and column_c =: P10_C.
  
  It works correctly if the user chooses a value for everyone, but if they do not choose a value for P10_B, I need my query to edit the where clause is
  
  where column_a =: P10_A
  and column_c =: P10_C.
  
  I have not found a way to do this, so I put my question to you. Is it possible to selectively include certain parts of the place where clause based on the presence of null values?

  Hello

  You must change your where clause to something like this:

  where (column_a = :P10_A OR :P10_A IS NULL)
  and (column_b = :P10_B OR :P10_B IS NULL)
  and ( column_c = :P10_C OR :P10_C IS NULL)
  

  I hope this helps!

  --
  Paulo Vale
  http://Apex-notes.blogspot.com

• Information about the parameter CASE_SENSITIVE_CHARACTER_COMPARISON

  Hi all
  
  Could someone provide information on the "CASE_SENSITIVE_CHARACTER_COMPARISON" parameter in the NQSConfig.INI file, which would be located under C:\OracleBI\server\Config\
  
  In our current environment, the setting is set to off, and application reports/guests throw not data as expected. When the parameter is set on, the values are as expected.
  
  So please let me know what should be the default value for this parameter, and if the parameter is set on there that no matter what impact on other applications?
  
  Published by: 819170 on December 21, 2011 18:54

  CASE_SENSITIVE_CHARACTER_COMPARISON

  Specifies if the Oracle Business Intelligence Server distinguishes between uppercase and lowercase characters when you perform comparison operations.

  Valid values are ON and OFF. When set to OFF, the case is ignored. When the value, the case is considered for comparisons. For binary types, distinguish uppercase / lowercase for the server and the relational database to put the same way.

  This setting applies only to internal comparisons of the Oracle Business Intelligence server for caching and aggregation. Distinguish uppercase / lowercase is a function of database operations and is defined at the database level. The CASE_SENSITIVE_CHARACTER_COMPARISON parameter allows the server to Oracle's BI correspond to functions of the backend database. The following operators are affected:

  * Order in
  * Group of
  * Separate
  * Join
  * comparisons (<,>, =, <=,>=, <> )

  For example, consider the following three terms:

  * ACME
  * DELTA
  * acme

  An Order By with CASE_SENSITIVE_CHARACTER_COMPARISON set TO results in rows in the order shown in the previous example. An Order By with case-sensitive setting translates ACME and acme are contiguous.

  If the term is case-sensitive and you perform a delete double (separate), the result is three rows. If the term is not case sensitive, so the separate result is two rows.

  CASE_SENSITIVE_CHARACTER_COMPARISON must be set in order to correspond with how the back-end database deals with cases. For example, if the back-end database is case-insensitive, then Oracle Business Intelligence Server must be configured to be case insensitive. If Oracle Business Intelligence Server and the back-end database are not case sensitive in the same way, some subtle issues can cause.

  For an example of CASE_SENSITIVE_CHARACTER_COMPARISON applied to the aggregation, a database that is case-sensitive has the following tuples:

  Units in the region
  WEST 1
  West 1
  West 1

  With the value CASE_SENSITIVE_CHARACTER_COMPARISON, the data is returned to the client the with the same results presented in the previous table.

  With CASE_SENSITIVE_CHARACTER_COMPARISON set to OFF, the data is still once returned to the client the with the same results presented in the previous table. There is no change because the Oracle BI server did not comparisons of characters.

  However, if SUM_SUPPORTED is set to OFF in the table of features, Oracle BI server is forced to do a character comparison. In this case, the query results include:

  Units in the region
  WEST 3

  The reason for these results is that the Oracle BI server has disabled case-sensitive character comparison, so now treat three tuples as the same value and the aggregates. In this case = West = Western. However, if you filter on the column of the region, you would always see the WEST regions, West and West. CASE_SENSITIVE_CHARACTER_COMPARISON does not affect the filtering on a back-end database. The logic shown in the example of aggregation applies to caching as well.

  Given that CASE_SENSITIVE_CHARACTER_COMPARISON is defined in the NQSConfig.INI file, the setting applies to the backend databases in a repository. So, it must be configured to match the case of the dominant baseline of the repository.

  Example: CASE_SENSITIVE_CHARACTER_COMPARISON = OFF;

  Hope that helps... It will result in the number of files in the output...

  Thank you
  V

  Published by: Vincent Krishna August 24, 2011 12:03

• Wireless Zero Configuration Error 1068: the dependency service couldn't start.

  I recently updated my network card of a TP-Link TL-WN353G to a DWA-552. Now whenever I start, I have to manually configure my wireless car does not start the automatic configuration service. When I try to start the service manually, I get the above error message. I am running Windows XP MCE SP3.

  Try to check the dependencies.  View the Services window:

  Start-> Run-> "services.msc".

  Then, double-click the Wireless Auto Configuration.  When the Properties window opens, click the "Dependencies" tab at the top.  Then check that these dependencies are present and active.

  HTH,
  JW

• Default for the parameter value date

  We use Oracle bi apps 7.9.5. In that when an organization dimension that we don't pass any value of loading
  setting $$ SRC_EFF_TO_DT. It is supported as on 01/01/1753. When the default value of 01/01/1753 is set?
  
  Is there a way we can define the parameter value globally for all dimensions in Informatica or DAC?

  01/01/1753 is Informatica's default date value. It uses this value when the parameter is passed to the parameter file and no default is mentioned in Informatica. To set the default value in Informatica, you may need to change all the mappings of one by one.

  Easy by default is to set this parameter to DAC - Design-> tab settings of the Source System. This will last for all workflows walked through the DCA during execution.

  Ash

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Why the DLL function performed by call library node fails when the Vi is reopened?

  Development system

  OS: Windows XP

  LabVIEW: version 10.0

  DLL: Custom

  Compiler: Visual C++ 6.0

  Function prototype: __declspec (dllexport) const char * test (void)

  We have developed a DLL to use.  Compile the DLL itself.  The DLL includes a function test.  The test function validates the functional capabilities of the DLL.  I followed the examples online, and I used the tool to import shared library in LabVIEW.  The screw created use the call library node.

  When I create a VI by calling the function in the DLL test customized by using the call library node the VI runs the test DLL function flawlessly.  I close the VI.  When I re - open the VI and run it, I get an error code of the DLL.  However, if I go on the schema and define the path of the DLL in the library call Configuration node once again the VI then runs the test DLL function perfectly again.

  I have set the path of the DLL in the library call Configuration node everytime I open the VI.  The examples that I downloaded from the community don't require this.  What could be the missing DLL?  What Miss me?

  I solved the problem.

  I had create the DLL by using the following steps for VC 6.0:

  1. new project

  2. Select the Appwizard (DLL) MFC

  3. Select the regular DLLS using the MFC shared DLLS

  4 Yes for source file comments

  5 finishing

  The DLL must be on the VI search path.  The easiest way was to have the DLL in the same directory as the VI.

• Features of Installation of Windows 7 software service stops responding when the system configuration

  I noticed that Windows 7 RTM (all versions, x 86 / x 64) has a bug on its features to Software Installation service which causes updates Windows hang during setup of the system (i.e. Windows is stuck on the message "preparing to configure Windows - do not turn off your computer"). M$ suggests to perform a repair with system restore or re - install the operating system from scratch, but is not an effective solution.

  Given that Microsoft has published 5 updates for setup of functionality of software on Vista, I wonder why they don't release a similar patch for Windows 7?

  I opened a support to report the problem incident, which probably occurs after installationreliability KB974431 update(Windows6 1 - KB974431 - x 64.msu).

  When Windows Update installing KB974431 update , the following error message appear when Windows configures updates after the system restarts and the installation of the update fails with error code ofC004F050 .
  Above the error due to the Windows operating system can not pass genuineWindows validation (WGA) . installation of KB974431 will fail if validation fails, or returns a status not valid or not genuine. Here is the procedure to fix it:

  1. click on Start .
  2. in the run box, type cmd and press ENTER.
  3. you will see the black command prompt window.
  4. enter sfc/scannow
  5. If this disable the grace period, it is reset using this code: slmgr /rearm
  6. restart your computer.
  7. try to update again.

  Hope this solution helps!