defective module: kernelbase.dll when the application is run as a normal user

Similar Questions

• ThinApped application requiring a mounted network drive and get "Unable to connect to the sharedDbLibrary" when the application is running on W7 and the drive is mounted

  We have an application that needs to have a specific network drive, mounted with a the letter I:\. This support allows the application to access some of the files that must be available for the application to run.

  If the I: drive is not mounted then the application will not work and you get the following message if displays the runtime "Impossible to connect to the sharedDbLibrary.".

  We have the application on an XPSP3 box thinapped and everything works fine as long as the drive is mounted.

  The ultimate goal is to have the application thinapp running on a workstation of W7.

  We have mounted drive I:\ on a post of W7 and ran the thinapp app by making the same error message that allows us to obtain under XP as drive I:\ was not mounted "impossible to connect to the sharedDbLibrary".

  We checked that the drive I:\ is accessible and we also validated that the path is good. We were able to reproduce the problem in a Windows 2008 box, as well on the other hand the thinapp works fine on a Windows 2003 operating system.

  So basically with the drive I:\ mounted on XP and Windows 2003 the app big short thinapp. With the same drive I:\ mounted on W7 and W2008 application does not run and we get the same message that allows us to get on WXP and W2k3 when drive I:\ was not mounted and the app couldn't find the mapped drive.

  Anyone know how to start to solve this problem?

  Have you had a look at this blog post? http://blogs.VMware.com/ThinApp/2011/04/making-Windows-XP-only-apps-run-on-Windows-7.html

  It might help you to add necessary dll and get the app runs on Win7.

• toggle is plotted on a graph when the application is running

  Hello

  I'm trying to figure out how to make a graph that allows the user to select which elements are drawn when the application runs.  I want all data to appear on the same graph with the same x and axis of ordinates and maybe some checked boxes or something to allow easily what items are displayed.

  Thank you

  Gary

  1... don't use two nodes in separate property for the PLOT VISIBLE and Act implementation CHART.  If you do that, you don't know who runs first, - they are independent.  Use a single property node (stretch it to include two properties).  The top property must be ACTPLOT, 2nd one, be VISIBLE TRACE.  In this way, it is guaranteed to run in the order you need.

  2 you are the cluster of box check ONCE at the beginning of the program of reading and using the same value each time.  You want to read the cluster when the CHANGE occurs, EVENT that is, in the case of the EVENT.  You can read the terminal, or read the NEW VALUE property for the event, so be it is OK.  But you have to read the new value, not the old one.

  3... you also read your buttons ONCE at the beginning of the program, and re - trace the same value whenever you draw. You need to know when you need to draw and THEN read them and lead the chart.

  4... If you set the timeout to, say, 100 mSec, in the TIMEOUT case, read the buttons and drive the graph, then you will have a living picture that updates approximately every 100 milliseconds.  Implement #1 and #2, and you can turn on and outside plots.

  I say "Roughly" because of the way the timeout works - if you wait 99 mSec and then click on a checkbox, the wins Manager check box and the timer 100mSec STARTS OVER when you get to the next iteration.

  If you want the table to day exactly every 100 msec and then use time separate loop, with a WAIT TIL NEXT MSEC MULTIPLE.  Do the waiting, read buttons, drive chart and repeat.  A separate loop will not be disturbed by events in the loop of the user interface.

• Intercept requests when the application is running

  Hello
  
  I use jdeveloper 11.1.2.3.0
  
  I would like to know how I could catch the queries that are run when the application is in use.
  I would like to see on the DB queries and also queries that are run in memory.
  
  Thank you!

  Hello

  This is the simplest solution to this:

  http://hasamali.blogspot.de/2011/05/ADF-BC-debugging-and-printing-runtime.html

  Frank

• How do I close the application currently running on the Tablet BlackBerry® Simulator.

  I'm new to blackberry Tablet

  I wasn't able to close the application and come to the home screen to check the new application.

  When I reboot and then I can able to see the home screen

  Can someone help me to go to the home screen when the application is running.

  Try to drag the mouse to the top of the bevel down/down (make sure that you start bevel).

  Once the application has been reduced in the center of the main screen you can drag it again to close it.

  . H

• Event 1000, Application error (the default application name: w3wp.exe - name of the failed module: KERNELBASE.dll)

  Hello guys,.

  During the execution of a web app to make me as a mistake: remote server does not. Here are the details of the spectators of the event who were captured at the same time where this error occurred:
  Event 1000, Application error
  The failing application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bd0eb

  Name of the failed module: KERNELBASE.dll, version: 6.1.7600.16850, time stamp: 0x4e211da1

  Exception code: 0xe053534f

  Offset: 0x000000000000a88d

  ID of the process failed: 0 x %9

  Start time of application vulnerabilities: 0 x % 10

  The failing application path: %11

  Path of the failing module: 12%

  Report ID: 13%
  Event 1001, Windows Error Reporting
  Bucket of error, type 0

  Event name: APPCRASH

  Answer: No available

  Cabin ID: 0

  Signature of the problem:

  P1: w3wp.exe

  P2: 7.5.7600.16385

  P3: 4a5bd0eb

  P4: KERNELBASE.dll

  P5: 6.1.7600.16850

  P6: 4e211da1

  P7: e053534f

  P8: 000000000000a88d

  P9:

  P10:

  Attached files:

  C:\Windows\Temp\WERC9CD.tmp.WERInternalMetadata.XML

  C:\Windows\Temp\WERC9CE.tmp.HDMP

  C:\Windows\Temp\WEREE30.tmp.mdmp

  These files are available here:

  C:\ProgramData\Microsoft\Windows\WER\ReportQueue\AppCrash_w3wp.exe_30877924d6b2c607fe88a8718915f25fb79093_cab_e905f2b0

  Symbol of the analysis:

  Recheck for solution: 0

  Report ID: d46a6849-8f6a-11e1-98af-00215e6e4855

  Display state: 4
  It is a priority issue we are facing in IIS. IIS is configured for the 2.0 Framework and underlying operating system is Windows Server 2008 R2 Standard. Please suggest how to solve. Any input related question above is significant.

  Hello

  In dealing with the problem with Windows Server 2008, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Skype number rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

  (Previously posted this in the Android subforum)

  I reset my phone to factory settings and it works now.

• How do 'Enum Control' disabled during the execution of an executable application and make activated when the application is stopped/abandoned?

  Hello

  I use a "Enum control" on the façade of an executable application built with application builder for LabVIEW 2013 full professional development system. I want Enum control remains activated prior to execution of this request so that I can choose any value from the list of available numeric values, but when I run this application; Enum control should become disabled so that the user can not select another value in the list of data during application execution values so that the default setting remains unchanged during the execution of this application. Enum control must also be activated when the application is stopped/abandoned so that the user can select any value.

  Could someone pls suggest a solution to this problem?  If I select the active state' to 'Disabled' in appearance tab then all listed values becomes disabled.

  Concerning

  Jamal

  I suggest to use the node property of persons with reduced mobility.  You can then disable the enum at the beginning of the program and then activate it in the judgment.

• Push notification when the application is closed

  Hello! I want to recive notify with my application when the application is closed.

  is this possible? An example of code for this?

  Kind regards!

  Sorry, with sample collector push, can result.

  Thank you!

• When the application is removed

  Hello

  How will I know when the application is removed

  make a wish of application registry in are on start .i want to cancel the phone from the server on the uninstall.

  In addition to a second request for guard dog, the only approach I am aware to do this was the CodeModuleListener added in OS 5.0.  Take a look at this and search the forum for other users who have tried it.  I'm not sure it works as well as we would like.

• Warn when the application moves to the State active or inactive?

  I can't find the right search words.  I want to be notified when the application becomes idle / reduced due to:

  user, reducing to the minimum the app

  When the unit is put or paused

  I also want to know when:

  App become active / goes to the foreground

  How can I check for these events?

  Hello! Check the Application signals: instance() in Application.hpp:

  void thumbnail();
  fullscreen() Sub;
  void invisible();
  void asleep();
  void awake();

• Notification when the Application in the foreground changes?

  Is it possible to get a notification when the application in the foreground changes?  For example, if the user launches the browser, can my application be notified?  I couldn't see anything through the global event listener callback.  I know it is possible to query for this application, but is not ideal.

  Jacul is right, you get notifications on your application becomes the application in the foreground (and vice versa) but there is no way to get this information on other applications.

• Prevent the PlayBook goes into mode standby when the application is open

  What is the code needed to prevent the PlayBook mode 'sleep' when the application is active?

  Maybe this can help: https://github.com/blackberry/WebWorks-Community-APIs/tree/master/Tablet/sleep