Change the conditions when the parameter is null

Similar Questions

• Change the parameter [] strings in a sub - bound dynamically VI

  I'm in a situation where I need to use the sub-panels to dynamically bind subVIs for data entry. I also like having the calling VI to change the [] parameter strings several enumerations in the Subvi, but this doesn't seem to be possible, as the Subvi is not in edit mode. Does anyone know of a way around this?

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  Thank you!

  derekemuff wrote:

  I read data from a file to initialize the enums, so that I can have the Sub - VI read the file instead, but I was hoping to do it once in the main VI and send strings to the subVIs to speed up execution.

  It's impossible.  Enums are set in stone at run time.  Oh wait, you try to use the script running.  Sorry, it does not work.  Note that the property for the [Strings] node for the enum is blue?  That tells you it is a script node and is useful for mounting screws over time edit.

  As RavensFan said, you use a ring.  Their data type is a real number.

• change the parameter db_recovery_file_dest

  Hello!
  
  We use oracle 10g on windows 2008r2. the flash recovery area is d:\fra. in recent months the amount of data has increased considerably, then move the fra to another (of course largest) partition/hard disk.
  
  now the question: is it possible to change the setting "db_recovery_file_dest' from d:\fra to e:\fra and then copy the games of backup and archive logs to the new location OR is - it enough to change the parameter and oracle knows that data before changing the setting must be placed in d:\fra? hope this is understandable... ;-)
  
  Thanks in advance!
  
  Ciao,.
  Christian

  Hello;

  Yes, you can change it and it should work fine.

  The catalogue will know on older backups, so it shouldn't be a problem.

  alter system set db_recovery_file_dest='e:\fra';
  

  No doubt it would change too: (at the same time)

  alter system set db_recovery_file_dest_size=??G scope=both;
  

  The audit is easy

  SQL>show parameter db_recovery
  

  Do NOT move the old files. Oracle will bark.

  If you want more than all of the files from an MRE old new FIU, follow the link

  http://download.Oracle.com/docs/CD/B19306_01/backup.102/b14191/TOC.htm

  Best regards

  mseberg

• Change the parameter Prototype of a Module DLL TestStand Programmaticaly

  Hello.

  I started this post inside the LabWindows, but there was no response.

  Hope I can get help here.

  Please see the following link

  http://forums.NI.com/NI/board/message?board.ID=180&message.ID=46129&query.ID=804485#M46129

  Thanks in advance.

  Hi Doug.

  I'm sorry for the delay.

  Here is how I solved the problem: I changed the module of the BCI to the DLL module.

  Here is a sample of my code:

  I changed CVIModuleGetParameters() and CVIParametersGetItem() to TS_DllModuleGetParameters() and TS_DllParametersGetItem and now it works fine.
  seqContextCVI = object reference ThisContext
  __declspec(dllexport) __stdcall GetControlarParameters (CAObjHandle seqContext) Sub
  {
  error int = 0;
  ErrMsg errMsg = {'\0'};
  ERRORINFO errorInfo.
  char strItemLabel2 [1024] = "";
  Step CAObjHandle = 0;
  CAObjHandle seqFile = 0;
  Module CAObjHandle = 0;
  Parameters CAObjHandle = 0;
  Parameter CAObjHandle = 0;

  tsErrChk (TS_SeqContextGetStep (seqContext, & errorInfo, &step));))
  tsErrChk (TS_StepGetModule (stage, & errorInfo & module));
  tsErrChk (TS_DllModuleGetParameters (module, & errorInfo & settings));
  tsErrChk (TS_DllParametersGetItem (parameters, & errorInfo, CA_VariantInt (1) & parameter));
  sprintf (strItemLabel2, "\"%s\"", "TEST" ");
  tsErrChk (TS_CommonCParameterSetValueExpr (parameter, & errorInfo, strItemLabel2));

  NOTE: After make a change to a stage you must mark the file, as amended by
  increment the number of changes to the file. It is also necessary for the change to show
  upwards in the sequence editor immediately.
  tsErrChk (TS_SeqContextGetSequenceFile (seqContext, & errorInfo, seqFile));
  tsErrChk (TS_SeqFileIncChangeCount (seqFile & errorInfo));

  Error:

  CA_DiscardObjHandle (Step);
  CA_DiscardObjHandle (seqFile);
  CA_DiscardObjHandle (module);
  CA_DiscardObjHandle (Parameters);
  CA_DiscardObjHandle (Parameter);

  If an error occurs, set the error indicator causes an error of execution at TestStand.
  If (error<>

  TS_SetStepError (seqContext, error, error);
  }

  Thanks for all the help.

  My best regards.

• A30 - still cannot change the parameter memory

  Hi, yesterday I asked if someone could help me change my memory of graphics chip integrated 32 MB to 64 MB on my satellite A30. Sascha suggested goin to view properties and adjusting the frame buffer, but there is no frame buffer setting.

  He says that the maximum memory for the graphics chip is 64 MB on my system, so I think there must be a way to change.

  Any help?

  Hi Neil,

  As Sacha has suggested how to change your frame buffer size is: -.

  1 Control Panel-> display
  2. click on the option "settings".
  3. click on the "Advanced" option
  4. click on the tab "frame buffer".
  5. Select your desired menu frame buffer size drop-down.
  6. click on 'apply '.

  Note that you can also do in the configuration menu of the BIOS (F2 during the boot process). Change the value of the AMU to your chosen size.

  Kind regards

• How to change the parameter default slot 'Style layer'-'Stroke '?

  Whenever I use "Layer Style"-> "Stroke", the default value is always red for 'Color' and 3.0 for the 'size '.  I would like to change the size and the color by default, so that I don't have the change of these parameters each time that I use "Style of layer"-> "Stroke".  Anyone know how to change the default settings?  Thanks in advance.

  Preset animations are the way to go. I have a library of more than 200 that I created to speed to the top of my work. Learn how to create them and use them by typing "create a preset" in the search help field in the upper right corner of the AE and dig through the resources you will find. The first link will get you started: using After Effects | Animation and effects presets overview

• Problems for existing VM after you change the parameter VT PowerEdge 2950?

  Hello

  We have ESXi 4 installed, a number of servers windows 2003 32 bit running but need to install Server 2008 64 bit. Didn't know that these parameters were until he is tried to install 64 bit OS and got the error message. I read through other posts, but haven't seen a direct answer to this question:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  Thank you

  cwhicks wrote:

  Are there any negative potential impact for my 32-bit servers existing after I enter and change VT enabled, NX enabled?

  No.; for 32-bit Windows 2003 by default execution mode is binary translation, if VT is enabled in the BIOS.

  If your Windows 2003 guests are running with SP2, you may find that you can get better performance by changing the mode of execution to VT - x (or VT-x/EPT on systems with EFA).  Before SP2, you definitely want to stay with binary translation.

• In the previous version of Firefox, I could close the window and still have my tabs intact when I reopened it. Why 4 FF closes all tabs and does not give me an option to save? (And if so, where can I change the parameter?)

  In the previous version of Firefox, before closing a window with tabs open, he asked if I would "save and close", "close all tabs" or "Cancel". FF4 comes to warn me that I am fill these tabs and wonder is I want to continue, without giving the option to save my search for later use.

  See if this post will help you

  https://support.Mozilla.com/en-us/questions/801145

  GW

• Change the parameter value in RTF model

  Hello
  Sorry if possible change a setting value of RTF model?
  Thank you for the ideas!

  Why can't use you the variable xdoxslt changed for her?
  Initialize the variable with a value of parameter.
  Reset the condition variable and use it.

• Change the default value of column NOT NULL to NULL

  Hi all
  How can I change the default value of column not NULL to NULL?
  Suppose I have run the following commands:

  SQL> alter table hr.test modify temp_num2 default null;
  
  Table altered.
  
  SQL> desc hr.test;
   Name                            Null?    Type
   ----------------------------------------- -------- ----------------------------
   TEMP_NUM                             NUMBER
   TEMP_NUM2                       NOT NULL NUMBER

  Why forced temp_num2 has not changed with the NULL value? I'm under 11.g rel2
  
  Best regards
  Valerie

  You can NOT change the column constraint NULL to contain NULL values by:

  alter table table_name modify column_name null; 
  

  After this change, the column can contain null values. In Oracle, not null constraints are created automatically when not null is specified for a column. Similarly, they are deleted automatically when the column is changed to allow NULL values.

• How the parameter passes the dynamically personalized Planner

  Hello
  
  I'm new to IOM.
  Need your help passing parameters dynamically to the personalized Scheduler.
  
  I created Planner customized by providing support for the task.
  I recorded the plugin via API, using the PlatformService.registerPlugin () method.
  
  I need to send the parameters of this CustomScheduler, so I defined in the metadata (CustomScheduleTask.xml) as a file below and get it imported in DB
  using the script weblogicImportMetadata.sh by providing the path of the file.
  
  < scheduledTasks xmlns = "http://xmlns.oracle.com/oim/scheduler" >
  
  < task >
  
  < name > CustomScheduleTask < / name >
  
  org.schedule.custom.task.CustomScheduleTask < class > < / class >
  
  < Description > details the user_id data extraction < / description >
  
  < retry > 5 < / re >
  
  < Parameters >
  < string-required param = 'true' helpText 'Username' = > user name < / param-string >
  
  < / Parameter >
  
  < / task >
  
  < / scheduledTasks >
  
  IAM able to import this plugin as well as the register the plugin successfully. Now, I set a task to which this Custom Tachesplanificateur is mapped.
  Now, in order to run this job (scheduled task), I need to provide the user name (or id) which must be sent as a parameter for the Scheduler must be running.
  But when you set the task with this scheduled task on the IOM console, I was not able to define or to pass parameter to this work. Therefore, the parameter is null in
  CustomSchedule execute method.
  
  Kindly help me how to pass the parameter dynamically during execution of the Task Scheduler console of IOM so that the execute method would be able to receive it.
  
  Thank you in advance.
  
  Kind regards
  Kumar

  Hello

  When you created the schedule the job for your personalized planning task, you should see your login name of textfield in the scheduled task. If this isn't the case, then it check your xml task calendar.

  In your class calendar code, add:

  public void execute (HashMap arg0) {}
  Final string METHOD_NAME = ' run: '; "
  Logger.Debug (CLASS_NAME + METHOD_NAME + "Input method - run");
  try {}

  String LoginName = arg0.get ("username");

  Kind regards
  Sunny

• How to change the size of the hover in Spry Panel, but not the rest of the site?

  Hi guys, I need to add more tabs which means I need to reduce the size of the font of my style of H2 and its stationary state. However, when I set it is 10 pt in sprytabbedpanels2.css it remains 14 in live mode to view until I also change the parameter to 10 points in my Arrowmark.css file, which then shoves upward stationary behavior of links elsewhere in my site.

  Is there a way to set the hover in the stylesheet of tabbed panels and will not affect the rest of the site? Or I do something wrong?

  My site is www.wakatipucollection.co.nz/wholesale

  Thanks in advance for the help.

  JO

  Hi Jo.

  Watch out, I'm not an expert, but in my way of thinking, your CSS Spry needs link Pseudo-classes to specify a special font size so that links in your tabs. Normal size attributes H2 or the police has no effect on the text which is a link.

  This may look like

  . TabbedPanelsTabHover a: link {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: visited {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: hover {}

  do-size: 9px;

  }

  . TabbedPanelsTabHover a: active {}

  do-size: 9px;

  }

  You have time to try it?

• Generated JNLP sometimes does not parse the parameter

  I use a .jsp file that has a content type of jnlp to start a program using WebStart. That's when I can analyze? UserID = theID from the URL and pass this (theID) as a parameter to the program webstarted. Usually it works, but sometimes I get the parameter as "null" instead. However, the parameter is specified in the URL used, and the problem will be solved often clicking again on the same URL. Does anyone have ideas what could cause this intermittent problem or how to check for it before trying to launch with WebStart? Currently, I solved by checking if it is null in the newly launched program and gives an error and released if, with a message to try again, but it is not ideal.
  
  The line that creates the argument in the jnlp is:
  < argument > - ssUserID = < % = request.getParameter ("userid") % > < / argument >
  
  And the URL is of the form:
  http://websitelocation.com/studyTests/tabtest.jsp?userid=X10 & School = HS2 & Class = P1
  
  Thank you!

  Hi vkeiser,.

  You can try this

  ~ Barry

• How to change the setting of Application Def - status to build to Run/construction

  Hello
  
  I made the following changes to a test application.
  
  Application-> definition

  Availability
      Build Status -> Run and Build Application (old value)
                      Run Application Only (new value)

  Because soon, I made the change above, now I am not able to change the application.
  following message is displayed when I click on the application

  This application is installed but not editable.

  How can any idea, I change the parameter back to Run and Application to build
  
  Thank you.
  Deepak
  
  Published by: Deepak_J on January 27, 2010 15:40

  Hello

  You need to privilege admin workspace to do
  Home > Administration > manage Services > Manage Build Application State

  Or instance admin can also change

  BR, Jari

• Changing the setting multichannel for VM RDM disk

  Hello

  I'm looking for a way to automatically change the parameter all RDM (for VMS) records multi-channel

  Do you know how to achieve this.

  You can try this

  # Get all RDMs
  $RDMs = Get-VM | Get-HardDisk | where{$_.DiskType -like "Raw*"} | %{$_.ScsiCanonicalName}
  
  # Set multipath to fixed (can also be RoundRobin or MostRecentlyUsed
  Get-VMHost | Get-ScsiLun | where {$RDMS -contains $_.CanonicalName} | Set-ScsiLun -MultipathPolicy "Fixed"
  

  ____________

  Blog: LucD notes

  Twitter: lucd22