Configuration NI9219 for measurement of deformation

Similar Questions

• Measurement of deformation of the sine wave

  Hi people.

  I'm trying to measure the deformation of the signal coming from a range. Its a sine wave typical that distorts the increase of entry (see attachments). I was initially just to subtract a known since the signal signal to give the difference. The fault point by point is great for this. I also try to figure out the slope over time and rapid changes of the slope would indicate the point. However, point-by-point calculation of the slope gives too much error. Is it possible to generate accurate slopes or y at - it a function that determines if a signal is not sinusoidal?

  Thank you

  Select this option.

  For a quick visual check, you can use vi tone detection and the export of the residual signal, maybe the effective value of the residues is a nice value (THDN)

  Measures of deformation of a periodic signal (in general) often made in the frequency domain and called harmonic distortion. Also, there are screws that can already do it for you.  (SINAD). The level of DHT is usually used.   See signal processing - wfrm measure

  Your traces resemble a calibration of accelerometer ball steel 1 g for me.

• How can I configure efax for my printer hp officejet 45oo wireless

  How can I configure efax for my printer hp officejet 4500 wireless

  Hello

  The Officejet 4500 with analog fax capability and does not support the eFax.

  Only models listed below support the feature of eFax:

  http://support.HP.com/us-en/document/c03102078

  Shlomi

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• Announcement: update the Configuration guide for RHEL v6/v7 with storage Dell PS Series available

  Red Hat Enterprise Linux Configuration Guide for Dell storage bays Series PS

  This configuration guide provides information on the integration of the RHEL 6 and 7 operating environments with the PS Series Dell storage arrays using iSCSI technology. The guide includes tips for working with volumes, using MPIO and some performance tips.

  The PDF file is available here:

  Kind regards

  Don

  Hello

  With Linux, as any OS, iSCSI is not different from the SAS/SATA or Fibre Channel.  No matter how you are connected to a "disk", it looks like a SCSI to the OS disk.

  So yes, you use the mount points.   That's how Linux as most UNIX operating systems do it.  But use any method supported for other iSCSI disks.   In Windows, you can use drive letters or mount points.

  Kind regards

  Don

• Configuration information for purchase

  I anticipate the purchase of a 700-200Z desire but I don't know if it has a SPDIF port.  Does anyone know?  I tried to discuss with a seller, but they didn't know what it was.

  Thank you

  Here's the specifications and options configurable factory for the desktop HP ENVY 700 - 200z CTO , you're interesrted in. Based on the specifications, this model uses a card mother HP JasmineR MS - 7778 The card mother JasmineR supports an optical S/PDIF of output, as shown below.

  

  2 - S/PDIF-optical output port

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Cannot save settings: unable to create a configuration file for the required configuration object

  When I try to open the application in the administrator account it say - could not save the settings: unable to create a configuration file for the required configuration object

  Thanks for the reply.i think that a virus changed I scan my computer and discovered C:\users\jason\AppData\local\temp\low\temporary internet files\content. IE5\TLIFXGRH\ why is Task Manager disabled people [1]

• How to configure Outlook for me a beep when a new message arrives

  How to configure Outlook for me a beep when a new message arrives

  Barry

  Hotmail, or Outlook supports email notification any longer.  Sorry

• Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

  Hi, I just got adobe dc and the need to edit a file, I have to open a file through adobe dc, and if so how to configure it for it?

  Hi michaelk66089044,

  You can open it from Adobe Acrobat DC application on the file menu > open. If you did request by default option to open the PDF, you can directly click on PDF.

  You can also right click on PDF and select open in Adobe Acrobat DC

  For help on PDF edition, please see this KB doc: using Acrobat | Edit PDF files

  Let us know if you need help.

  Kind regards

  Meenakshi

• How to configure OracleB2B for asynchronous communication of AS2.

  How to configure OracleB2B for asynchronous communication of AS2.

  Appreciate your help.

  Thank you

  Levey

  1. under the attributes of an AS2 route for the business partner channel, the acknowledgement Mode has been set to: Async

  2. under settings of the Exchange Protocol, receiving delivery Option has been set to, http://:/b2b/httpreceiver.

  I think that this configuration has started working... Please let me know if I missed any other config.

  Thank you

  Levey

• Export the configuration information for each group

  How to export the configuration information for each group? (I want to see the information that this group has read or write access to the cube XXXXX)

  By LCM, I was able to export information on groups and users. But no information about its commissioning. can any body tell me how can I get the configuration of shared services information

  We have a utility to do this, or can we get this information using LCM?

  Any information about him will be useful

  Thank you

  The commissioning is under Application groups > Foundation > Shared Services > native Directory > assigned roles > then choose the product / app

  There is a utility command line available if you want to automate the process of execution of export - Oracle Hyperion Enterprise Performance Management System Lifecycle Management Guide, you create the definition of migration file but which can be done by running an export.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Configuring RMAN for dataguard.

  Hi all
  
  Here we have an environment dataguard with db1 (db_unique_name) as primary and db2 (db_unique_name) Physics of the standby database. For primary and secondary the ORACLE_SID is "oracledb." We have configured dataguard in environments of 10 g and we don't use a grid control. And now we want to configure rman for incremental backups. We use a third database of catalog which we recorded primary DB successfully. When the primary configuration of rman is show conflicts. Even changes to the main configuration of RMAN are applied on the standby too who I think shouldn't happen in this scenario. How to solve this problem? Is what is happening because of the ORACLE_SID even for primary and secondary school? I enclose the link from the doc, we also followed the errors and configuring in rman. Can anyone help?
  
  http://docs.Oracle.com/CD/B28359_01/server.111/b28294/RMAN.htm#BAJFBBBB
  
  
  RMAN > CONFIGURE ARCHIVELOG DELETION POLICY APPLIED PENDING;
  
  new RMAN configuration settings:
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
  new RMAN configuration settings are stored successfully
  from full resynchronization of the recovery catalog
  full complete Resync
  RMAN-08591: WARNING: invalid archivelog deletion policy
  
  RMAN > set UP DB_UNIQUE_NAME db1 CONNECT ID "db1".
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'db_unique_name': expected an a: ' archivelog, auxiliary, auxname, backup, channel, controlfile, clonename, compatible, datafile, device, by default, exclude, encryption, maxsetsize, retention, instant.
  RMAN-01007: line 1 column 11 file: entry standard
  
  
  RMAN > show all.
  
  from full resynchronization of the recovery catalog
  full complete Resync
  RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 2 DAYS WINDOW;
  CONFIGURE BACKUP OPTIMIZATION # by default
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP # by default
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY;
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / u01/app/oracle/product/10.2.0/db_1/dbs/snapcf_NIOS.f'; # by default
  
  
  Thank you.

  Hello

  You must set log_archive_dest_2 (for the standby database) mandatory
  Like this

  alter system set log_archive_dest_2= 'service=standby lgwr async valid_for=(online_logfiles,primary_role) *mandatory*';
  

  try again the configuration of the deletion of journal policy archive on RMAN.

• Should I configure teaming for ports connect to the ESXi Server?

  Greetings,

  I want to install an ESXi 4.1 on a Dell 2950 with network 4 GB ports. 1 of them is used as netowrk management and I would like the rest of the team 3 connection, my question is should I configure teaming for these 3 switch ports on the physical switch for these 3 connection of ESXi?

  So far I have nothing on physical switch and it seems fine, I just want to know that.

  Thank you

  Mike

  If you do not need to run the virtual machine in different VLAN, then you don't need to configure a lot of things about the physical switch. Make sure only allow multiple MAC addresses on each port (switchport mode access) and covering the whole tree portfast.

  Configure vSwitch with uplinks 3 and you're ready. ESX will assign uplink in a responsive manner, because the virtual machines are powered on (default: route based on the source port id).

  André

• Main configuration files for vmware ESX configurations

  <! [endif] > <! [if gte mso 9] >

  <!--

  / * Style definitions * /.

  p.MsoNormal, li. MsoNormal, div. MsoNormal

  {"mso-style-parent:" ";"}

  margin: 0

  margin-bottom: .0001pt;

  MSO-pagination: widow-orphan;

  font-size: 12.0pt;

  do-family: "Times New Roman";

  mso-fareast-font-family: 'Times New Roman' ;}

  @page Section1

  div. 1

  ->

  What is the main configuration file for VMware ESX

  configurations? (only one file without path name)

  Thank you!

  ESX.conf

• Configuring SSL for the server SOA

  Hi all
  
  I am wrkin on SOA suite 11 g. I'm tryin to implement transport-level security. All first authentication 1-way and 2-way mutual authentication. For this I have to activate the SSL for the SOA server that is managed by the administration WLS server. According to my knowledge the WLS comes with demoidentity and demotrust keystore. If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.
  
  Now, in case I need to create a new keystore that can I do the same thing using keytool utility. Also, is it possible to do this using keytool utility? If Yes, please provide me with some links on how to do the same.
  
  Thanks in advance.

  Hi Shlomit,

  If I need configure SSL for server SOA do I need to create a new keystore and CA, s, or I can use keystore demo.

  You can use the keystore Demo dev purposes, but it is NOT recommended to use demo keystore for use in production.

  in case I need to create a new keystore that can I do the same thing using keytool utility

  Yes, you can do this using the Keytool utility.

  is it possible to do this using keytool utility?

  In fact, you can generate a self-signed certificate and use it as a certification for CSR signing authority.

  Please provide me with some links on how to do the same thing

  You should get everything here-

  http://download.Oracle.com/docs/CD/E14571_01/Web.1111/e13707/SSL.htm#i1200848

  Kind regards
  Anuj