Caddy drive for Optiplex 7010?

Similar Questions

• Try to upgrade the video card for an Optiplex 7010

  Hi all

  I searched the forums and found answers, but most are about a year old. I have an Optiplex 7010 with the following configuration:

  G1XNT 1 Hard drive, 1 TB, S3, 7.2 K, 512th, SGT-GRDABP

  VT8FP 2 Dual In-Line Memory Module, 4G, 1600, 256 X 64, 8, 240, 2RX8

  H924H 1 Card, controller, 1394 has Pc Interface, full height, Lsi Logic, unleaded

  VVYN4 1 Graphics card, 1 G, OUGA9, full height, W8

  G8CNY 1 The Assembly, radiator, shroud, Performance, average lap, 95W

  8JY5G 1 ASSEMBLY, CHASSIS, INTEGRATED PWA TOUR, 7010, FPAC

  D7RF6 1 Processor, IVB, I7-3770, 3.4, 77 w, 4 c, E1

  I realize to update my graphics card, I need to upgrade from my diet, and I'm fine with that. What I really struggle with, is what are the specifications of the motherboard on this computer. I would like to know what my bandwiths PCI-E are on it (IE 1 PCI-E X 16 1 PCI-E X 4?)

  Also, I would get the best graphics card I can get to what will fit (for adobe work). I measured the space and wow is not much... most graphics cards are 10 "long, and the space, it seems to me is only a fight 7.5" before I launch into the box for hard drives. I assumed that I could cut out the box and free up space, but thrilled to hear what others use.

  Also, I noticed there are only two PCI-E ports, but the 2nd is probably useless due to how close his pushed to the bottom of the case so I'm stuck with a 1 GPU option.

  Keep all this in mind and without cutting into the hard drive cages, let me know if this could work:

  GPU: MSI N760 ITX gfx card http://www.newegg.com/Product/Product.aspx?Item=N82E16814127772

  Power: 600w http://www.newegg.com/Product/Product.aspx?Item=N82E16817438014 EVGA

  Don't get me wrong, I would like a more powerful GPU (I push 2 monitors 1920 X 1080), but I don't see how I can get whatever it is also gone...

  Feeding okay? It works for that?

  Thanks for all the help and advice that you have!

  Food looks good.  It is only 5.9 "long which is what you want for your snap custom mount you have on this system.  The MSI card is very short, it looks like a good way too.  Your system has a PCIe X 16 2.0 slot for the video card.  Speeds of the lower PCI X 16 slot is connected to X 4.  With only a 250 watt power, this system is all designed for video cards more if two small.  The 760 GTX is a powerful video card.  I see no need to put a video card premium that costs $500 or more in a Dell system.  To do so, make a custom version of a case of nice game for better air flow and cooling.

• upgrade dell optiplex gx620 to vista need driver for onboard sound plz help

  dell optiplex gx620 to on-board sound card Vista upgrade is not compatible with Vista

  can anyone help with driver sound...

  The latest drivers that Dell has are for XP, they do not have Vista drivers:
  http://www.Dell.com/support/drivers/us/en/04/DriversHome/NeedProductSelection

  Vista - update drivers:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Vista - driver problem tips:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

• Audio driver for Dell optiplex gx 620

  I need Audio driver for Dell optiplex gx 620 for windows 7 64 x

  Go to http://www.dell.com, click Support at the top of the page, select support for individuals, then drivers and downloads and finally put the number of serial number of your computer.  Downloads to be there.

• This graphics card back on my Optiplex 7010?

  Hello

  I want to improve my Optiplex 7010 with a high-end graphics card. I'll buy a new power supply, but the problem here is that this card on my pc?

  The card is ATI Radeon HD 7950 with dimensions 275 (L) x 115 (W) x 42 (H) mm. The size of my optiplex is 21.5 x 21.5 x 13.8 inches. It fit?

  You can answer the question for yourself with a plastic ruler. The answer is THAT NO, it won't FIT in ANY model because hard drives are on the track of the cards that are over 9 inches long.

• Dell Optiplex 7010 USB 3.0

  Hello, I recently bought a Dell Optiplex 7010, i7 with Windows 7.  When I tried to copy on a 250 GB of data on a USB 3.0 external drive, it get a slow speed of 18 MB/s.  It would start at about 22 MB/s but then fall to about 18 MB/s.  I had checked the speed of the hard drive as some people recommended and I shows that I have 7200 rpm on all my hard drives, checked the connections to make sure that I use the blue ports 3.0 and have the latest software updates.

  Can anyone tell if I can get better performance?

  Thank you kindly

  Hello

  I bought the Dell Optiplex 7010, which is originally installed BACK/ubuntu and I installed Windows 8.1 Pro x 64. When I connect the USb 3.0 external HARD drive it does not automatically detect unless I have get new changers of material on Device Manager.

  as noted earlier above comment Dell I have download the files and try to install but I got an error "this computer does not meet the minimum requirments for the installation of the software.

  can you please help me solve the problem?

  Kind regards

  Janaka

• Caddy Ultrabay for T430

  Need a HARD drive for my accommodation Ultrabay, all recommendations Caddy? Currently thinking about newmodeUS models, but some very expensive on amazon... but don't want to make a bad.

  Thanks for the notes. I decided not to run the risk and went with the caddy newmodeUS. Yes, probably, but the piece of mind that it WILL work, worth it for me.

• Can I replace my DVD burner drive for the drive on Aspire E5 - 551 G-T018?

  Hello

  Recently I opened my Matthew acer aspire E5 - 551 G-T018 to replace my 1 TB to 240 GB SSD HARD drive.

  And now I recently saw on a website that there are these caddy that can be used to replace the DVD rom for extra HDD or SSD.

  My laptop has a DVD. It is held by a screw in the back. DVD rom doesn't have a SATA connector, but some small connector and SATA, I don't know his name.

  What I was wondering is would it be possible to replace the DVD rom on this model for a caddy with my old HDD in there?

  And if it's possible. Thickness of which would I need for my future caddy?

  Thank you!

  You need a basket similar to this, I post this link only for information, do not buy from this link, you can google for the same product and get any retailers in your country for travel instructions in youtube and you can find some videos.

  http://www.eBay.com/ITM/2nd-SSD-HDD-Caddy-adapter-for-Acer-Aspire-E5-571-E5-571G-E5-521-E5-471G-GUA0...

• Need a driver for xp designjet 230 that works!

  I have a hp Designjet 230.  I just bought a Dell Optiplex gx270s with XP PRO Service pack 3 in the hope of using this printer.  Windows supposedly has the right driver, but when the new hardware found box is in place, the result is a step to go. I downloaded the driver xp Hp PL532en, pointing the installation in this folder ends with a message "unable to install".  The search to the internet with the installation program does not work either.  This printer has always worked on xp.  What gives?

  I'm sure that you read and followed all the instructions on the download page of hp (which curiously do not refer the wizard 'new hardware found'), but I suspect there's a bit more to this error message.  Could you please provide it in its entirety?

  Windows XP includes drivers for DesignJet 230: one for (D/A1) and the other for (E/A0).

  What happens when you follow this sequence:

  1. with printer and computer off, connect the printer to the computer (BTW, this printer connects using the parallel port - a connector 25-pin Centronics - OK?)
  2. turn the printer on and stabilize
  3. open computer and let stabilize.  Cancel the new hardware found Wizard opens.
  4. click on start > printers and faxes > add printer
  5. in the Add Printer Wizard, select "Local printer attached to this computer" and uncheck "automatically detect and install my plug and play printer."
  6. Select "Use the following port", then the correct port in the drop-down list (probably LPT1)
  7. Select the correct driver for the HP DesignJet 230
  8. finish the wizard.

• Hello! Where to find drivers for Optiplex 380?

  Serial number: Service tag removed by privacy policy >

  I see the only driver for video Bios of end. Where can I find driver for sound, Lan?

  THX

  Sometimes enter a serial number in the file for this library. You should look for the Optiplex 380 credits see the drivers. Go hereand choose your operating system.

• Three monitors on a Del Optiplex 7010

  Hello

  I am trying to install three monitors on my Dell Optiplex 7010. I have the graphics card integrated ports (2xDisplayPort, 1xVGA) with you and use a PCI card with two ports (1xDVI, 1xDisplayPort).

  The three monitors I have are out 2xDVI, 1 output VGA x.

  I have been using some converters for my monitors cable to the DisplayPort Concerto to connect them to the Ports on the PC display.

  Both DisplayPort monitors work very well using the integrated graphics card, but the VGA is not. I was told that it is because of the converters I use.

  I tried several different combinations to make it work with no luck: (.)

  Could anyone suggest how I might get this work or what graphics card I would be able to buy to make this work?

  Thank you

  Boldonglen

  Hi Shawn,

  I've been in contact with one of your technical guys and we went through a few diagnostic checks to see why I could not as well integrated graphics card and graphics card dedicated to the work. We finally found a solution. Because I use Windows 8.1, I needed to update my BIOS using this link. Once I updated my BIOS, I went into the BIOS and enabled the multi-screen display box. Once we did, and I restarted my PC I managed to connect monitors for two graphics cards internal and dedicated, and they all work.

  Hope this helps someone.

  Kind regards

  Glen Robson

• (Redirected) OptiPlex 7010 ultra slow operation of SSD

  Introduction:

  1. On OptiPlex 7010 with Win 8.1, I spend 1 TB HDD 500 GB Samsung EVO 850.
  2. All the drivers are updated, updated BIOS to newest. I use Samsung Data Migration to transfer the data.
  3. Fully updated the system works OK with original 1 TB HARD drive

  Result of migration:

  1. Slow start system
  2. The extremely slow system operation.

  Based on the Internet reading I have the following Questions:

  1. The result is slow bad SSD op?
  2. The result is slow op of aversion Dell Samsung SSD ;-)
  3. Anyone know anything unusual on OptiPlex 7010 (smart Marvel, capacitors or any other hidden gems)? (Software is updated so I guess that's a program installation configuration or HW)

  Receive a response

  Best of this post in the Hardware Forum general office, here:

  http://en.community.Dell.com/support-forums/desktop/f/3514.aspx

  Bev.

• Audio driver for my Coumputer

  I need a help

  I want a sound driver for my desktop OPTIPLEX 780 - 8-64-bit operating system windows.

  Thank you

  This is the driver you need

  Description	Version	Supported OS	Download
  Analog Devices ADI 198 x integrated HD Audio, v.6.10.2.7280, A11 This package provides the Analog Devices ADI 198 x integrated HD Audio Driver and is supported on Optiplex 780 that run the Windows operating system at the following address: Windows 7/Vista 64-bit. More details	6.10.2.7280	Windows 7 64 bit Windows Vista 64-bit

• OptiPlex 7010 with Zotac GTX 660 Ti, no video output

  I have an Optiplex 7010.  I installed a PSU Corsair AX760i and have let it run for a week check that the upgrade has not created a new problem.

  Now, I am trying to install a Zotac GTX 660 Ti video card.  It seems that the new video card is recognized as the graphic edge generates a video signal is no longer, but there is also NO signal through connectors DVI 660 GTX.  I've checked the tension on 2 power connectors 6 pins for the video card and + 12v is here.  Any ideas?

  OK, I solved the problem.

  I had to modify the following parameters of the BIOS for the GTX 660 Ti Board to operate.

  General

  Advanced startup options

  X Enable Legacy Option ROM

  Secure boot

  Secure Boot Enable

  X disabled

  After making these two changes, the video card GTX 669 it works now.

  The video Commission works today, a new BIOS option appeared in which I allowed, as follows:

  Video

  Multi-display

  Enable multi-display x

  At this point, I have now loaded the drivers for the new graphics card and everything seems to not work as desired.

  I also noticed from another forum that he had questions about the "SERR Messages" BIOS option, it is ACTIVATED in my machine.

• Driver for Lexmark Z705 to Windows 7 Home Premium

  I recently acquired a Dell Optiplex 760 desktop computer refurbished with Windows 7 Home Premium.  My computer has obviously no driver for my Lexmark Z705 printer.  As I do little impression, I won't buy another printer.  Can I get sort of a driver that will allow me to print with my version of Windows?

  Vista drivers have been reported to work for some.

  Make sure that the corresponding architecture of your Windows (32-bit or 64-bit). You may need to run the installation program in compatibility mode print driver.

  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en&ProductCode=LEXMARK_Z705&focusedTab=downloads#1