Configuration of a very large area of tables

Similar Questions

• value are of a sequnec and looking at a very large number

  Hello
  
  We have a table that has a column filled with a sequence - it is maintained by code in owb, but is growing at a rate higher than expected
  
  for example sequence begins to tell 10000000000, expect the next row until the b created with 10000000001 but the big gap between the two.
  
  Have a separate ticket raised with oracel for this as maintained by dimesnion opertaor code.
  
  However, I have two or three sequences of questions reagrding.
  
  (1) can how big be
  
  (2) if we try to application numbers that over 14 digits begins to show the e in the tool that we use (pl/sql developer) is there a way to make sure that we see the integer (sqlplus?) and
  I'm assuming that say if had number column that very large say 18 digits long attached to an another numbers table 18 long then no problem?
  
  Thank you

  If you take a look at the documentation for creating a sequence, you will see that the maximum value is 10 ^ 27, assuming that you do not specify a maximum. If you have generated 10.000.000.000 (10 ^ 10) sequence values every second, you don't miss in 10 ^ 17 seconds which is about 3 * 10 ^ 9 years (3,168,808,781 or 3 billion years). The Earth is approximately 4.5 billion years if your sequence would not run out of values for about half the current age of the Earth. For most systems, it's a lot.

  In SQL * Plus, you can control the display of a column using the COLUMN command

  SQL> ed
  Wrote file afiedt.buf
  
    1* select 1e20 col from dual
    2  /
  
         COL
  ----------
  1.0000E+20
  
  SQL> column col format 999999999999999999999999999;
  SQL> select 1e20 col from dual
    2  /
  
                           COL
  ----------------------------
         100000000000000000000
  

  Justin

• Why Outlook edit text in e-mails to a VERY large print?

  In our business, we have at least five computers running Outlook Express (my soft Office 2010) with the following problem:
  Customers are often receive e-mails with text in very large print - hard to read and not a professional look for us.

  I don't know how your network is set up, and I don't use of moy. I found this through Google well.

  From: http://free.avg.com/ww-en/faq.num-3031#tba2

  The AVG E-mail Scanner can affect your sending/receiving e-mail, since it is designed to analyze the messages and needs to access somehow. The access method messages depends on your e-mail client, but that the personal email of Scanner plugin can interfere with communication between your computer and the e-mail server.
  To disable the personal E-mail Scanner (if it is installed), please:

  Please activate the servers that have been enabled originally again when possible.

  And from here: http://www.vcn.com/knowledgebase/article.php?id=436

  1. exit all programs are running email.
  2. start the AVG Control Center. To do this, click the small square red, black, yellow and green to the bottom of the clock in the taskbar, in the lower right of your screen.
  3. click on the big button Email Scanner (found on the right side of the Control Center window). Select 'Properties' from the bottom panel in the control center.
  4. a window should open with a plug-in tab at the top. Click on "disable plugin" in the Plug-ins tab.
  5. click the "Configure" button and uncheck all 5 options (scan incoming messages, scan outgoing messages, use the heuristic method, scan in archives, scan attachments).
  6. click on OK and then OK again.
  7. close the control center. Open your e-mail program, and then try again.

  ****************************************************

  If the problem persists, it may well be the sender of outgoing messages scanning, but if this happens for every sender, which is unlikely.

• With the help of the network location and mapped a drive to the server FTP. during the transfer of very large amounts of the login information is always lost.

  With the help of the network location and mapped a drive to the server FTP off site; during the transfer of very large amounts of the login information is always lost.  Computer power settings are configured to not to do no matter what, I'm assuming that the ftp server can publish a scenerio timeout but is there a way for my computer and windows to restart the file transfer?

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, you have a problem with networking on the FTP server.

  The question you posted would be better suited in the Technet Forums. I would post the query in the link below.

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence.

• How can suggest us a new DBA ECO certification for very large databases?

  How can suggest us a new DBA ECO certification for very large databases?

  This web site, or what phone number can call us to suggest the creation of a certification of VLDB ECO.

  The most important databases that I've ever worked with barely more than 1 trillion bytes.

  Some people told me that the results to be a DBA change completely when you have a VERY BIG DATABASE.

  I could guess that maybe some of the following topics in the configuration can be on it,

  * Partitioning

  * parallel

  * more large block size - MAS vs. OLTP

  * etc.

  Where I could send a recommendation?

  Thank you Roger

  This forum is probably your best choice, Brandye would be one of the contacts I would use to make such a request.  If you are really interested in this, I would be further demand more.  Specifically, most Oracle certifications available to have a corresponding course available in the OU. If you want to create a new certification, one of the most compelling arguments would be to suggest a certification that tests information for which there are already one or more courses.  Looking at the current offerings of courses 12 c, the following two seem to come more close to what you ask for:

  Database Oracle 12 c: implement partitioning Ed 1

  Parallel processing in Oracle Database 12 c Ed 1

  These areas are covered somewhat in 1Z0 - 117.  You will need to make a case for a certification that hit different areas of knowledge.  Looking at the course for both subjects, partitioning has more that are not covered in-depth on 117.  However, it is supposed to be a 12 c Data Warehousing expertise certification coming out this year that may require a partitioning good knowledge.

• Keep two very large synchronized data warehouses

  I look at the options to keep a very large (potentially 400GO) datastore TimesTen (11.2.2.5) in sync between a Production Server and [sleep].

  The replication was abandoned because it does not support compressed tables, or table types creates our closed code (without PKs not null) application

  1. I did some tests with smaller data warehouses for the indicative figures, and a store of 7.4 GB data (according to dssize) has resulted in a set of 35 GB of backup (using ttBackup - type fileIncrOrFull). This surge in volume should, and would it extrapolate to a 400 GB data store (2 TB backup set?)?
  2. I have seen that there are incremental backups, but to keep our watch as hot, we will restore these backups and what I had read and tested only a ttDestroy/ttRestore is possible, that is full restoration of the full DSN every time, which takes time. Am I missing a smarter way to do this?
  3. Y at - it other than our request to keep two data warehouses in the construction phase, all other tricks we can use to effectively keep the two synchronized data stores?
  4. Random last question - I see "datastore" and "database" (and to a certain extent, "DSN") apparently interchangeable - are they the same thing in TimesTen?

  Update: the 35 GB compress down with 7za to slightly more than 2.2 GB, but takes 5.5 hours to do this. If I take a fileFull stand-alone, it is only 7.4 GB on the disc and ends faster too.

  Thank you

  rmoff.

  Post edited by: rmoff - add additional details

  It must be a system of Exalytics, right? I ask this question because compressed tables are not allowed for use outside of a system of Exalytics...

  As you note, currently the replication is not possible in an Exalytics environment, but that is likely to change in the future and then he will certainly be the preferred mechanism for this. There is not really of another viable way to proceed otherwise than through the application.

  With regard to your questions:

  1. a backup consists mainly of file of the most recent checkpoint, more all the files/folders that are newer than this file logs. Thus, to reduce the size of a backup complete ensure

  that a checkpoint occurs (e.g. "call ttCkpt" a ttIsql session) just before starting the backup.

  2. No, only the restore is possible from an incremental backup set. Also note that due to the large amount of rollforward needed, restore a large incremental backup set can take quite a long time. Backup and restore are not really intended for this purpose.

  3. If you are unable to use replication, then a sort of application-level synchronization is your only option.

  4 data store and data mean the same thing - a physical TimesTen database. We prefer the database of the expression of our days; data store is a legacy term. A DSN is something different (Data Source Name) and should not be swapped with the data/database store. A DSN is a logical entity that defines the attributes of a database and how to connect. It is not the same as a database.

  Chris

• How to get rid of the msg "...". is very large and may take a long time to

  Hello
  Simple question:
  How to get rid of msg "...". is very large and might take a long time to load... »
  I tried to increase the number of cells under "App settings-> options-> warn if greater than 5 000 000 000 data form. I even tried to '0 '. Nothing works planning 9.3.1

  Hello

  That's how I've always changed the number of cells, after which display the message on the forms of data.

  There are 2 levels of adjustment. You can configure the application level, but users must select "Use Application Defaults" in the planning of the preferences of the user parameters. To do this, use the file-> Preferences and select schedule.

  Otherwise, you can set the value of the number of cells at the level of the user for ' warn if data form more xxxx ". It should solve the problem. This should be the installation program if you have not selected checkbox default Application for the user in the preferences of planning.

  If nothing else works, it is very difficult to guess, I would open a SR with Oracle.

  Let me know if it helps.

  See you soon
  RS

• Why firefox doesn't go very large print even after that I customized to print smaller.

  I downloaded Firefox and the screen is very large fonts and the screen is big too.

  Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  Try to assign layout.css.devPixelsPerPx 1.0 (default is - 1) on the topic: config page.
  If necessary adjust the value by 0.1 or 0.05 (1.1 or 0.9) until icons or text looks right.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can watch the Default FullZoom Level or NoSquint extension to define a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• the menus appear initially very large or very small

  When in the Firefox browser if I click on a menu, it appears very large or very small. When I move the arrow in the menu change to the right size. This has not happened before. Is there a solution?

  Try Firefox Safe mode to see how it works there.
  
  A way of solving problems, which disables most of the modules.
  
  The problems of Firefox using Firefox SafeMode

  When in Safe Mode...

  • The State of plugins is not affected.
  • Custom preferences are not affected.
  • All extensions are disabled.
  • The default theme is used, without a character.
  • userChrome.css and userContent.css are ignored.
  • The layout of the default toolbar is used.
  • The JIT Javascript compiler is disabled.
  • Hardware acceleration is disabled.
  • You can open the mode without failure of Firefox 15.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
  • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

  If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

  Or it could be caused by hardware acceleration.

  When find you what is causing that, please let us know. It might help others who have this problem.

• I support a very large school district running Firefox 3.6. What will happen at the end of life date? In the online environment, we test this week.

  I run the test center for a very large school district with over 120 students of k. We have a current deployed at base of 54 client machines of k using Firefox 3.6. We have not upgraded for many reasons, of which the most important is to remove the possibility of use in navigation private students and dealing with plugin-updates for the digital non-born (read dumber than a bag of hammers users) that make up the majority of the customer base.

  We test ESR now, but only discovered this end of life for 3.6 is tomorrow, 4/24. We are currently in the middle of the scale of the State of online tests. The question is, what will happen tomorrow, when the browser will end of life. ESR wiki mentions that "an update to the current version of Firefox Desktop will be available through the Update Service Application"

  So the main question is, are my students/teachers goes to get a popup telling them that they have updated the browser if we have already turned off updates? If so, can I I disable remote using SCCM, because there will be all sorts of havoc.

  Please advise as soon as possible and thank you in advance.

  An addon like https://addons.mozilla.org/en-US/firefox/addon/disable-private-browsing-pl/ can help, or http://kb.mozillazine.org/User:Dickvl / Private_Browsing_disable (don't forget, this is beyond what this forum can help you with if you need help making these changes).

• I was almost finished to fill a very large document when my computer turns off. Is it possible to recover what I had done?

  Original title: Document lost

  I was almost finished to fill a very large document when my computer turns off.  Is it possible to recover what I had done?

  Hello

  What document you worked on?

  Have you worked on all office applications?

  If you are working on a Word document, you can check out the following link and check if that helps.

  http://support.Microsoft.com/kb/316951

• App crash when loading very large images in Spark Image component

  Hello world

  A client of ours should display very large jpgs (about 8000 x 5000 px), which are the object of a scroll and zoom using touch gestures.

  To my surprise, even, the performance to do this using a scroller is pretty cool

  BUT unfortunately the application sometimes freezes when loading the image. (about 15% of chance to do)

  Debugger does give no info at all, simply closes debugging.

  Does anyone have an idea what could be causing this or how to avoid this?

  PS tested on several machines and different Versions of Tablet, including 2.1.0.1032

  Thx a lot.

  Tim.

  Sorry it took me a long time to respond, but I had other issues to be addressed in the first place

  Use the Profiler showed a leak memory in the skin of the viewer of the image.

  It is a memory problem.

  I must put BimapImage null source value before destroying the display manually, even if I had no other reference to it.

  A little strange, but this solved my problem.

  He could reappear obviously using a single image much bigger, but I guess that it must accept some limits on a mobile device somehow.

• is it possible to change the display in the files of all very large icons at a time, rather than change them individually?

  I want every file access for the very large icons view. I don't want to change all my folders one at a time. I also want to keep these settings because they sometimes return to a smaller view. There are a few directories that I want to display the contents of a list.  I don't want to change any folders to assign all other folders. All advice appreciated. I don't see this option in the Control Panel/Options of folders.

  Hi Mary Ann,.

  I suggest you try the steps from the following link:

  Change the folder options
  http://Windows.Microsoft.com/en-us/Windows7/change-folder-options

• Need to free more RAM to sort and link several very large excel files

  HP Pavilion dm1 computer running windows 7 64 bit with Radeon HD graphics card laptop. Recently upgraded to 8 GB with 3.7 GB of usable memory.

  I have several very large files with more 150 000 lines in each excel file. Need to combine these 3-4 files and sort. Research to maximize the availability of memory.  The Task Manager is total view Mo 3578, available - 1591 MB, cache - 1598. Free 55MO.  A single instance of Chrome and Excel 2014 without worksheet are running.
  Appreciate your help.

  It's her! It worked... disabled the maximum memory and restarted.

  available memory is 7.6 GB to 8 GB. Oh boy, I can't believe it...
  Thank you guys. Many thanks to hairyfool, Gerry and countless others who have given pointers...

• I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64.

  PROBLEM WITH MY LAPTOP CONFIG AND SYSTEM.

  I'm running Windows 7 64, but when I read the configuration of the system, they are all noted 32? Why is this? I bought my Acer Aspire 7750 g with windows 7 64. It has been preloaded. I am VERY confused!

  When you view this file.

  If you check through the Task Manager > processes (tab) some will note * 32 because they are native 32-bit applications running on a 64-bit operating system.