Configuration of Digital Signature of small business

Similar Questions

• Configuration of SNMP on Cisco Small Business 300 Series managed switch

  Please can someone help me configure SNMP on Cisco Small Business 300 series switch?

  Thank you

  Hi Anton,.

  Don't forget to activate the service SNMP is first of all: Security > Services TCP/UDP.

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=3b13278d9ef9402a8fef57...

  also, you will find useful documents for configuration etc on our server community kb:

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=183cae2148d445b2a07473...

  Let us know if you have any problems.

  Aleksandra

• Help to configure the digital signature?

  I have recently been upgraded to Acrobat Pro DC. In my previous version, digital signatures included text indicating that I had digitally signed the document at a specific time and date. I can't seem to do that work now, even though I see a signature that looks like that in "Configure Signature appearance" in the signature settings. I have a digital ID for which I checked 'use for the signature' in Digital ID & certificate trust settings. All I get when I select the "Sign & Fill" tool is my typed name. What Miss me?

  Try to select: Tools > Certificates > Digitally Sign (toolbar button)

• Cisco TelePresence Manager version 1.7 does support Windows Small Business Server 2008?

  Hello

  Is Microsoft Windows Small Business Server 2008 supported the Protocol LDAP, AD and MS Exchange server for Cisco TelePresence Manager version 1.7?

  Thank you

  AA

  Hello Ahmed - although this configuration "can work", Windows 2008 Small Business Server is not on the support list. This means that it has not been tested and it certifies to work with telepresence.

  To my knowledge, he's not on the roadmap for the future support however, I search and repost as soon as I have an answer for you.

  Kind regards

  -Andrew

  Sent by Cisco Support technique iPhone App

• best configuration for Small Business Server

  I'm looking for advice on HW and SW recommendations for a small business.  We have 15 users, 20 computers and 3 printers.  I currently have a single Windows Server 2008.  I want to run a domain controller main for all users, file sharing, print server, possibly Windows Update Center and eventually MS Exchange.  I am trying to decide the best configuration of HW with a fairly cheap budget.   I currently have 1 I7 based server with 4 GB of Ram, several IBM servers, P4 306 m (I have 4 +), and a lot of hard drives (all in a half rack).  I also need a decent backup system.

  Can anyone recommend the best configuration of HW player and hard?  Should I analyze server roles?  With respect to the SW, I'm a non-profit and use Windows Server 2008 (at a discount)

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Pix 501 for Small Business SERVER 2003 configuration problems

  I am new to cisco equipment. My company recently purchased a firewall of Pix 501 unlimited number of users, it is connected to an internet connection by cable with a dynamic ip address. Internet works fine and so the dhcp server.

  I have a Windows 2003 Small Business Server on our network. I need to configure the firewall to forward ports on the SBS server for remote web workplace.

  Also about a week ago I lost connectivity to the GUI of PDM via my web browser. Telnet and console work perfectly well.

  I enclose my config file.

  Any help will be appreciated. Thank you

  Ed

  FIRT off, you do not have a group-access instruction set for one of your ACL. This means that you have blocked all inbound traffic. You also have your incorrect static instructions. You can start by cleaning your config and enter the correct commands, you should be able to stick to your firewall config mode:

  No list will host 192.168.1.1 acl-enabled access 192.168.1.1

  no access list acl_outside not allowed tcp any any eq www

  no access list acl_inside not allowed tcp any any eq www

  no access list no incoming icmp permitted any one

  No list of permitted no inbound tcp access any host 24.50.241.113 eq https

  No list to access acl - permit gre 192.168.1.1 host 192.168.1.1

  No outside_in not allowed access list tcp any host 24.50.241.113 eq www

  not static (inside, outside) tcp interface www SBSServer www netmask 255.255.255.255 0 0

  not static (inside, outside) tcp interface https SBSServer https netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface www SBSServer www netmask 255.255.255.255 0 0

  not static tcp (exterior, Interior) interface https SBSServer https netmask 255.255.255.255 0 0

  static (inside, outside) tcp 24.50.241.113 80 192.168.1.69 80 netmask 255.255.255.255 0 0

  static (inside, outside) 24.50.241.113 tcp 443 192.168.1.69 443 netmask 255.255.255.255 0 0

  access-list OUT-IN permit tcp any host 24.50.241.113 eq https

  access-list OUT-IN permit tcp any host 24.50.241.113 eq www

  allow to Access-list OUT-IN a whole icmp

  Access-group OUT-IN in interface outside

  What ip you are trying to access your pdm of? the looks of configuration http correct, unless your coming to one other than 192.168.1.x ip address

  Let me know if it works

• User logged on the server over the RDP session - Small Business Server 2011 x 64

  We have a Small Business Server 2011 standard x 64.  We have the configuration of the remote desktop on port forwarding in the firewall to allow a user to connect to this server using RDP remote desktop.  This isn't a server terminal server.  No, there are no available Remote Desktop Manager settings.

  When the user connects through the RDP application and connects to the server.  If the users session is idle for 15 minutes, the user is connected to the server (not disconnected the RDP session, just to connect to the server).  The user must log into the server every time that happens.  We tried adjusting the Remote Desktop Session Host settings and changed the Session time limits, but this isn't the parameter we are looking for.  We have looked extensively through the default domain group policy and see nothing active to this behavior.  We examined local group policies and studied the session time limits in the user and computer configuration > policies > models Admin > RDP >... session host and it is has anything configured here which could trigger this behavior.

  Yet once, it connects the disabled user, not closing the remote session.  We have also examined the user account for this user and looked for resume posting require logon settings (although with SBS, it is not even there to adjust the display settings).  I had partner Microsoft supports focus on this during one hour (he didn't use too much of my time to support) and they have been unable to resolve within an hour.

  Help, please!

  Thank you.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to configure the digital output of the pci terjeta 6023E in LabVIEW 8.5?

  Hi, I have a card PCI-6023E and LabVIEW 8.5 and I need is to configure the digital output on the card, but did not.
  My idea is to get a port of digital data on the map and control by a pwm small dc motor.
  I wonder what are the modules with which you can do.

  Hi skudero,

  Probably the web page tracking and the attached example will work.

  PWM in software timing using a digital output line

  Concerning

  Charley - NIB - SR 1368189

• The Hard Drives on Windows Small Business Server 2003 upgrade

  I have a Small Business 2003 Server with RAID 0 with two drives hard exisitng 160 GB.  I want to update the server space and replace the two hard disks to the existing with two new drives of 1 TB.  I have a picture of the existing and once the new disks are set up, I would like to upload this image to the new.  I would appreciate help on this topic, since this will be my first time upgrading.  I think I should mirror the exisitng, remove these 160 HB disks and install the two new drives in their place without touching the RAID configuration, or I have to go in the RAID controller and let the controller to find them.  then, use a startup disk to point to the image on an external USB drive and let the RAID the rest?  I'm on the right track?  Help, please.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/categories/

• To turn off the pilot Digital Signature in Windows 8.1, 250 HP

  Product: HP 250 laptop

  O.S: Windows 8.1

  Hello
  I use HP 250, I try to disable the digital signature driver in windows 8.1

  I managed to run

  bcdedit - set loadoptions DISABLE_INTEGRITY_CHECKS

  However, the time of execution order

  bcdedit-set TESTSIGNING

  I am asked: "an error occurred setting the element data. Value is protected by the Secure Boot Protocol; It cannot be changed or erased. "

  May I know is there another option I can do to disable the digital signature of the driver? Help, please

  Hello

  You will need to boot into the bios menu, select System Configuration, expand Boot Options and disable Secure Boot before running the last command.

  Kind regards

  DP - K

• 0xc0000428 error - "Windows cannot verify the digital signature for this file."

  Original title: 0xc0000428 error

  I'm using Windows Vista and I already had the problem, "the Windows Boot Configuration data file is missing required information" which I have rebuilt the bcd for. Now it won't let me not restart due to the error 0xc0000428, stating "Windows cannot verify the digital signature for this file. How to do this?

  Hi Rajisace,

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  ·         Please provide us with the file information in the error message.

  Method 1: Try to start the computer using the last good known Configuration and check if you can successfully start.

  Using the last good known Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 2: I will suggest you to do material clean boot and check to see if you encounter the same problem.

  1. right click on my computer-> properties

  2 Hardware tab Device Manager->

  3. right click on the sound card, video card and NIC, one by one, then click on turn off

  4 restart the computer.  If the problem is resolved, you can then enable the devices one by one to find the exact mechanism causing the problem

  After you find the device that is causing the problem you can solve by installing the latest driver or replacement of the unit.

  I will also propose you to check if the boot priority is set on hard drive and check if you experience the same problem.

  Method 3: Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

  Hope this information is useful.

• Plug-and-Play for Cisco Small Business 300 Series managed switch

  Nice day

  What are the automatic installation options available for the Managed Switch series of Cisco Small Business 300?

  It seems there are not, the operating system is not the standard IOS I used to.

  I would use with ability to bridge the Infrastructure first Cisco PnP.

  Concerning

  Stone

  First Infrastructure use and assume an agent CNS (Cisco Network Services) on the other side, when you enable the 'plug & play '. Series 300/500 do not run IOS and does not include the CNS agent, but there is a way to activate the automatic configuration. Switches supported by the automatic DHCP configuration (using DHCP options 66, 67, etc.) in which case they automatically download their config to a TFTP server at boot time. This allows an administrator to put the configs for all switches on a TFTP server and simply start a default switch factory in order to obtain config.

  Seal a document shows how this is done.

  Hope that the information would be useful.

• Problems with config Small Business switch

  Hi, I know that if I read the documentation I will come for answers, but I'd really like some input from someone with more knowledge than me. I have a problem with Cisco SF300, one of the Small Business switches. I have a single interface on my router and I need to separate my internal networks, I thought that one way would be to use VLANs. On my two internal networks a network has D-Link unmanaged switches, the other has the Cisco SF300 I did as follows.

  On the Cisco Switch, all of the default ports for ports of junction. I changed FE1-FE24 and GE1-2 to access ports.

  Created two VLAN and placed FE1-FE24 in VLAN10 (also my management VLAN), GE3 is a trunk Port for unidentified VLAN20, VLAN 20 uplinks to my DiLink switches. This way my unmanaged switches traffic arrives on a trunk on VLAN20 untagged port.

  GE4 is a trunk port and I assigned to VLAN1 untagged, tag VLAN10 VLAN20 tag and. 10 of VLANS and VLAN 20 then to my router.

  The plan was to connect GE4 to my router, but I had two things happen that I can't explain.

  All first as soon as I connected my D-Link to GE3 LAN on VLAN20 came down, I couldn't ping servers from computers etc, all devices are connected to the D-links unmanaged. Secondly, the responsibilities of VLAN changed on GE3 GE4, VLAN 10 and 20 disappeared and only the VLAN by default was assigned, also under settings VLAN my state of interface VLAN for VLAN20 shows people with reduced mobility. One of my FE12 continues also to change VLAN access ports.

  Can anyone offer any suggestions as to what might have crushed the LAN and why change my VLAN. I wrote my config running at startup configuration incidentally.

  I added two screenshots.

  Seriously, I'd appreciate the help.

  Thank you

  Bob

  Hi Bob,

  Could you please post a topology? I can help with this, but it would be much easier that I could see your network.

  Thanks in advance,

  Garrett

• You need to add a 3rd WAP to existing small business network. Where I start?

  The network has 26 ports Cisco switch and 2 existing WAPs, 1 of which is an air 1040, and the other I'm not sure but it resembles that of other.  I need to add a 3rd WAP for a small room.  I was going to use an other cisco 1040 air, but I don't know where to start.  There is a smaller, lighter WAP that works?  I have no experience in network configuration, so I'd like something simple.  Help, please.

  Thank you

  Laura

  Hello Laura

  My name is Eric Moyers, one of the Experts I wireless in the Small Business Support Center.

  Normally, I tell customer to add products similar to their outgoing network when they're trying to develop it. This prevents the learning curves to a minimum and help in getting enlargement and running faster. However, there are time going with brand new products are better, especially if you are trying to integrate the best technologies.

  The Aironet 1040 currently being End of Life / end of sale. You would need to look for a different model.

  He stay with the Enterprise Access Points level, the AIR 1602 has the same capabilitoes as the 104 you're too used. Price range is 300 above low 400 according to one where you look.

  If you want to look at small businesses, we have the WAP561 which is also dual Radio and should do everything the 1040 can or you can look at the WAP371 that is double also but includes a radio that can make the new signal "AC". These two serve 200 upper middle 200 depending on where you look. By the way that they look almost identical to the AIR1040 as well.

  I hope this can help you started, please let me know if I can answer anythin else or go deeper.

  Eric Moyers
  .:|:.:|:. CISCO | Eric Moyers | Cisco technical support |
  Wireless and monitoring subject matter Expert

  Please note useful messages and let others know when your Question has been answered

  You can click on my name next to the image if you want to email me directly