Configuration of navigation restrictions?

Similar Questions

• Navigation restrictions

  Hi, I would like to restrict navigation of PDFs to only be able to navigate using the links within the document (such as a web page) and cannot scrolling using the scroll bars or a hand tool. Is this possible?

  Use separate documents for pages.

• How to configure the Navigation hierarchy for any construction spec?

  Hello.  We have recently installed the pack of H - Nav solution with configuration of literature values.  In our H - Nav views, we see that some of the documents issued by forumations are not extending to the whole of the hierarchy.  Specifically, we have a few products that have 4 or 5 layers of forumations.  We see only two layers, and would like to see build it together.  We have tried to increase the number of key = "HierarchyNavigatorDefaultExpandedLevels" value = "5", but has seen no increase in the number of PKIDs.   How can we change our Setup to get all the layers?  The keys on which need modification?  Do we need to reinstall or can we change the configuration and run a process?

  Pointers would be greatly appreciated.  Thank you.

  When you use the referenced output of a formula in another formula you can select the context inside the front gate.  A drop down menu appears in the cell of entries where you can select the forumulation.  It's the formulation denorm uses to find the appropriate children.   If no context is selected, the system does not know where to go and treat it as a standard input, stopping at this level.

  If the context is defined and the system is not yet find kids go ahead and drop a SR.

  Let me know if you need me to send a screenshot.

• Apex 42 5 theme image files in the list of the Navigation menus

  Environment: Apex 5 / 12 c/Linux

  Theme 42 - Menu Navigation

  I'm trying to configure the Navigation Menu to use images in the directory of the East (or #WORKSPACE_IMAGE #) rather than the css fontawsome images.  The help in the Navigation Menu panel shows that the option to use fontawsome css images or images of file system is controlled in the list template.  However, I can find no documentation on how the template must be configured to control this option.

  I copied the side Menu of Navigation list model with a new model (picture Menu in the side Navigation) and the Navigation Menu to use this new list (under User Interfaces).  I tried various constructions in the new model based on the construction of li JQuery for example replace the HTML for the list template in the sense of: -.

  "< li characteristics-current ="true"data-id =" "#A01 #" unable to read the data = "#A02 #" data-icon = "false" >

  "< a href =" "#LINK #" title = "#A04 #" > < img src = "#IMAGE #" / > #TEXT_ESC_SC # < /a > < /li >

  However this is made with a fake fontawesome class and the img tag is removed.

  Various other html constructs fail, which suggests that a flag is somewhere that is needed to indicate to the Apex renderer to use images of filesystem rather than fontawesome classes.  It doesn't seem to be a global setting or the option to configure this.

  Any ideas?  Or the development team would provide advice?

  Thank you.

  HI Paul,.

  Have understood you things by yourself very well.

  You are right that change the markup for the list to be used by widget tree side navigation will not affect the markup generated client side. It is similarly of the menu widget. The tree and the menu widgets are JavaScript data-driven. The markup simple list is just a way to let the models list APEX to create menus or trees. The markup simple list gets transformed into a JavaScript data which are then used to create widgets. The treeView widget and the widget menu cannot use the img tags to display icons.

  Say that 5 APEX uses FontAwesome icons or even the icons of fonts is a little too specific. APEX 5 uses CSS to specify icons. This includes using images and CSS sprite images as long as they are specified in the CSS. Based on the options you give, I think that you understand the situation. In addition to background images 64 Basic, you can use other background images as well. For example, an image of the CSS sprite comes with jQuery UI, and is at your disposal. Or you can use a single image. You can create your own images to sprite.

  Take a look at this simple demo application where I used some of the icons of the sprite CSS UI jQuery as well as some images from the APEX.

  https://Apex.Oracle.com/pls/Apex/f?p=81996:1

  I created a file called my_sprites.css and transferred as a static application file. Then I added it to the user interface of office under CSS files:

  #APP_IMAGES #my_sprites.css

  Here are its contents:

  body .a-TreeView .ui-icon.fa,
  body .a-TreeView .mi-icon.fa {
      display: inline-block;
      margin: 0 12px;
      vertical-align: middle;
      padding: 0;
      height: 16px;
      width: 16px;
  }
  
  body .a-TreeView .mi-icon.fa {
      height: 20px;
      width: 20px;
  }
  
  .t-TreeNav .a-TreeView-node--topLevel > .a-TreeView-content .ui-icon.fa,
  .t-TreeNav .a-TreeView-node--topLevel > .a-TreeView-content .mi-icon.fa {
      display: inline-block;
      margin: 0 12px;
      vertical-align: middle;
      padding: 0;
      height: 16px;
      width: 16px;
  }
  
  .t-TreeNav .a-TreeView-node--topLevel > .a-TreeView-content .mi-icon.fa {
      height: 20px;
      width: 20px;
  }
  
  .mi-icon {
      height: 20px;
      width: 20px;
      display: inline-block;
  }
  
  .mi-icon-calculator {
      background-image: url("/i/htmldb/icons/pt_computation.png");
  }
  
  .mi-icon-piechart {
      background-image: url("/i/htmldb/icons/pt_piechart.png");
  }
  

  The navigation tree side force the type icon "f" then the fa class is added to all icons. If the CSS overrides some properties for the fa class. Some other special css is necessary for when icons are in a tree. For the menu icons, I entered "mi-icone mi-icone-Calculator" for example Image/class field.

  I hope that this help show how to use other types of icons CSS.

  Kind regards

  -John

• jsf2 navigation problem

  Hi, I have a problem using a navigation in JSF2.0.
  
  Login.XHTML
  
  "< h:commandButton action =" #{userBean.initialize (1)} "value =" #{msg.user} "/ >
  
  UserBean.java
  
  @ManagedBean
  @SessionScoped
  / public class UserBean implements Serializable {}
  
  public String initialize(int a) {}
  Return "success";
  }
  
  faces-config. XML
  
  < navigation-rule >
  /views/login.XHTML < of view - id > < /-view-id >
  <>navigation-case
  < of the action - > #{userBean.initialize} < / action >
  success of < from outcome > < / de-results >
  /views/logon.XHTML < to view - id > < / to-view-id >
  < redirect / >
  < / navigation-case >
  < / navigation-rule >
  
  
  Navigation does not work!
  
  * If I change the method [initialize] to "declaration of logon", it works. But I don't want the faces-config. XML allows to configure the navigation. How do I do? Thanks for your help! *

  #{userBean.initialize}
  

  Try

  #{userBean.initialize(1)}
  

• Navigation issue

  Hello
  
  I have items in my following form
  
  Block a (Item1, Item2, Item3)
  Block B - control (Item4)
  
  With using the property of the Navigation element, I could navigate point! Item3 (when hit the move to position key input to the agenda) but since Item4 in another control block (block B) can not configure thro navigation item.
  
  If I want to focus on Item4 when hitting the button entry @ Item3. How this could be done
  
  
  
  Thax
  
  
  sexy

  Vanessa,

  You can use GO_ITEM OR GO_BLOCK in the NEXT ITEM KEY of the ITEM3 trigger.

  You can set the first navigable point of block 2 as Item4 and then use GO_BLOCK.

       GO_ITEM('.');
  

  OR

       GO_BLOCK('');
  

  Kind regards

  Manu.

  If this answer is useful or appropriate, please mark. Thank you.

• Treat the AVL ATF error file in the opening AVL recorder data

  We test our engines with AVL testbed. After the series of tests, we got the result of the test stored as FAT filesystem. According to AVL test bench specifications, Puma Open settings and data are stored in format ASAM ODS (Open Data Services). This means that the data structure conforms to the ASAM standards.

  But while we try to use the Diadem software for process AVL data file, we found something strange. The problem is that the tiara can open all other groups of the AVL ATF file as "AND" "EM" etc except the recorder group. Test data recorded by AVL Puma cannot open the Diadem software. The tiara channel shows "Novalue".

  Could someone tell me the reason and the solutions?

  Thank you

  While the file is readable by itself, it contains certain constructs that are not loadable using the submatrices.

  Use the attached code to load.

  Option Explicit
  
  If (FileNameGet ("ANY", "FileRead", DataReadPath, "the file ATFX (*.atfx;")) *. (ATF), *.atfx; *.ATF") ="IDOk") then
  "atf (x) open file
  
    Dim param: param = "" & replace (FileDlgFileName, "&", "&") & ""
  
    Dim store: store set = navigator. ConnectDataStoreByParameter ("ATFX", param)
  «get the submatrices to load»
  
    protected subMatrixEntity: subMatrixEntity = store. Model.Entities ("AoSubmatrix"). SubTypes (1). Name
  
    Dim sms: sms the value = store. GetElementList (subMatrixEntity, "")
  ' Load with the default configuration
  
    Call Navigator.LoadData (sms, "Load", Navigator.Settings.CreatePropertyImportSet (store))
  End If

• New installation of XP on Y550 - card reader problem

  I pulled the hard drive a Y550 and put in a new drive. Install XP on CD. Went well.

  Tried to update a driver with one of the drivers downloaded from Lenovo.

  "Not enough place to expand on C:" it turns out that XP is recognizing the card reader, assigning "C:" and assign the hard drive "E:" I tried reassigning 'C:' disk hard by following the instructions on the web site of Ms. This has messed up the license key and the system does not start. Check the BIOS to disable the card reader, but didn't see any option to do so.

  I need XP on this system and the hard drive must be "C:" I guess I could implement a system dual boot, installation of XP on the drive to Win 7, but I'd rather not.

  Anyone have any ideas?

  Solved the problem by disabling USB in the BIOS then reinstalling XP. Everything now works even if I had to install the version of Win7 a few things in order to make them work. I can not configure Desktop Navigator (version of Win7, XP version does not) but at least it starts is and that's good enough for now.

• The Vista parental controls prohibit itunes

  I tried adding itunes to the firewall, the eligible programs, Web sites eligible etc etc.  Simply the Vista parental controls seem to have to be turned off (allowing children access to _) if they want to connect to the itunes store using itunes.  I saw messages regarding this gong in 2006.  Surely, there is a problem now?  Perhaps a free upgrade to Win7?  Seriously, I need to get this to work once and for all.  Help!

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Here's a great Tuorial on how to set up permissions, etc. in the Parental control.

  Table of contents

  1. Introduction
  2. Welcome to Windows Vista Parental controls
  3. Configure the Windows Vista Web filter
  4. Configuration of time restrictions
  5. Configuring game Restrictions
  6. Configuring what programs are allowed or are blocked
  7. How to create a custom Web allow block
  8. Advanced information
  9. Conclusion

  Above list is what is there for you to implement.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones GPS, the 8300 and ATT

  I got my 8300 about a year previously and has waited until now to install the Garmin Mobile for Blackberry.

  Cingular says it had GPS 'ability' and I thought that it meant "integrated."  I paid $100 for the Garmin

  Download and got the version for phones WITH GPS.  Naturally he has no satellite.

  It is then that I discovered that I have the 8300 and not the 8310.  In addition, I had no Blackberry Maps

  featured and was ready to download/install, when I noticed the statement that IT DOES NOT

  ON ATT.  So, now I'm here with a bad brain trying to figure out how to get out of this trouble before

  I fed the rest of my money to Garmin or ATT or the PERSON, to get a less-than-perfect GPS Setup.

  I could get the Bluetooth GPS receiver, someone else purchased for about $60. Garmin Mobile software

  is an OF WHAT GPS with integrated phone and I noticed somewhere that it does not work for phones receive signals

  a Bluetooth receiver.  To stay with Garmin, I have to buy their package for about $150, which includes a

  receiver and the software to go with it.  Using THIS plan, buy one once, there seems to be no. $ 9.99/month

  subscription to process. (I'm wrong, or am I missing something here?)

  I could get the receiver for $60 as shown above and subscribe to Telenav GPS stuff that came with

  My att phone. I downloaded the new maps of them today, but I am not at all impressed with their quality.

  I also think that it is outrageous to pay the subscription of $9.99 / month to something I have trouble reading.

  Then... I guess I wonder if I should cut my losses here and go get the Garmin Nuvi that someone else

  has said was excellent for car navigation?  I like really use my 8300 for everything and have GPS it would sweep.  But I don't know if I combine a GPS system on the phone that he would give me the configuration of navigation that I would.

  There you have it. Opinions and advice are appreciated. BJ

  "One thing that made me hesitate to go to the BlueTooth receiver was the suspicion that he has not used the satellites, but uses rather server signals, or receiving cell tower." "I ordered the receiver Globalsat BT BlueTooth - 359C last weekend; I'll let you know how it works. »

  .

  .

  It works very well... and really uses satellites.  With Blackberry Maps, the dashboard for the navigation shows the speed you're going on the left, the right direction and a satellite icon in the middle with a number, which I guess is the strength of the signal.  The unit works as well for the location with Google maps, too.  Note: the key to the Bluetooth passcode is 0000.

  For more information, see: "http://www.usglobalsat.com/p-214-bt-359c.aspx."

  .

• Plan of blackBerry Smartphones that BB?

  The description of the Plans of BlackBerry on T-Mobile is not clear. I was wondering what I should get for unlimited text messaging. I can do without the web browsing, but I need IMing.

  you're right, it does not tell you anything beyond the personal e-mail configuration and navigation. 9.99 looks best, but you will not be able to navigate through blackberry browser, but can set up personal e-mails. and 19.99 gives you can browse by e-mail.

  I guess you have to call TMO to find out if you can use various IM, I guess that you will ask them anyway to add the plan. Your choices are really plans 19.99 or 9.99

• MP - BGP import map Mulfunction

  Hi guys

  Another day, another weird happening. Here it goes:

  Background:

  In our network, we have separated the different types of traffic using the VRF. We have so many VRF which increased throughout the network. The point of connection between the VRF is MP - BGP. In other words, we have independent MP - BGP (MP - BGP without any nearby statement) configured on select routers that would be subject to the import and export of the routes in the different VRF. There are 'card import' and 'export card"configured under configurations VRF to restrict the prefixes we want to transfer between the VRF.

  Problem:

  Today, I wanted to update a list of prefixes for a card to import on the entire network. I needed this change on both routers. When I added the new permit prefixes in the list of prefixes for the import map, one of the routers reflects changes correctly by redistributing the roads while the other does not. Not the answering router is a Cisco 6509 with IOS image 12.2 (33) SXH3 IP services. The router works is a service of Advanced IP Cisco 7609 with IOS 12.2 image (33) SRC1. To simplify configuration, you can view the process as below:

  Map source VRF---> MP - BGP---> import---> Destination VRF

  Troubleshooting done so far:

  I spent a good part of my day looking at this matter. I checked that:

  1. two routers have the new prefixes in the source VRF
  2. There is no limitation in MP - BGP for the source VRF export
  3. I see that the prefixes in the source VRF BGP table
  4. There is no fault striking in terms of wrong type the name of the prefix-list route-map or import plan since we have another pair of these routers and the same situation going on there. The 6509 do not redistribute while not in the 7609.
  5. Only the router 7609 would eventually import the new prefixes in the destination VRF according to the changes made in terms of the import.

  Weird or what?

  Here's what I think the problem is: the card-import on the 6509 will not refresh automatically. Here's how I came to this conclusion:

  1. Early on I did a 'ip-prefix clear list' on both routers to set the numbers of statements access 0
  2. I added the new prefixes in the list of prefixes on both routers
  3. I did a 'Show the details of the ip prefix-list' command on the two routers
  4. I found that the hit counts for all the States in the list of prefixes of the 7609 were recalculated (including the number of newly added States access)
  5. This shows that when you add or remove a declaration of the prefix list, the 7609 courtesy of the updating of the import map
  6. Shockingly the stroke counts on the statements in the list of prefixes on the 6509 had all set to 0 (resulting from the ciommand 'clear' issued earlier)
  7. This shows that the import-map has not been updated
  8. This problem manifested itself in other ways as well although I won't get in but they are all indicating that the import-map isn't updating when statements are added or removed from the partner-listI prefix

  Now I know that many of you might suggest to remove the import map and add it again however, the production and make that change is not going to happen soon, so I would be grateful if any of you guys has other thoughts on this. This could very well be a bug that we continue to discuss with Cisco.

  Thank you

  Hello Babak,

  first of all, I want to thank you for the clear and complete description of your problem.

  Your results might suggest that an alternative implementation of BGP MP regarding BGP MP feature import map is in two IOS 12.2 SXH different trains (33) and 12.2 (33) SRC.

  This could be the case.

  I tried to look at the toolkit bug for 12.2 (33) SXH3 with the search key "import map" and there are some bugs listed, but none is an exact match of your scenario.

  This one

  CSCts25780

  card IP vrf import problem

  Symptom: change 'ip cpmmunity-list' does not inform the route-map and directions are therefore not re-evaluated whenever the road map is used. Conditionsof : route map should be "community game" configuredWorkaround: change the path map directly

  Is related to the refresh missing roads when a Community list of ip is changed (called in the road used in the import map map).

  It is therefore closer what I see.

  I'd say it's almost the same question an object used for correspondence in the road map has been changed and the road map is not reassessed.

  In your case is that a prefix ip-list in the description of the bug is a Community list.

  Best regards

  Giuseppe

• When you create interactive PDF files in InDesign, buttons are down in the DC / Acrobat Reader

  Hello Acrobat Forum:

  I create an interactive e-book PDF I get incompatible with questions. I spent a lot of time trying to solve it, and I still have to find a solution. I have some configuration of navigation on a master page that I need to change the page level. These buttons should have a reverse effect, so the bearings must exchange. Most of the time these works. It is the 25% of the time this is a problem. And when there is a problem, they are not displayed. The final PDF is created an InDesign book with 5-6 papers in it. It has 6 layers with the top layer of mostly unprintable.

  That's what I tried:

  • Made sure all the layers in the ID book are exactly the same.
  • Handset of all horizons for the navigation and buttons on the same layer.
  • Exported with only the layer of activated navigation. This fixed the problem with the navigation, but once all the other elements have been added the problem came back.
  • Changed order of the layers. Same result with the loss of elements.
  • Excerpt from the page with the fall as they appear and buttons. As soon as I replace the page with this page the complete document, they give up.

  I use the latest version of InDesign (version 2015.4) and DC Acrobat (version 2015.017.20053).

  I have many more of these books, it is imperative that I find a solution in the future.

  Thank you.

  Scott Silva

  Nashua NH

  After much trial and error trying to figure this issue out, I came up with the solution that solved my problem. The issue has to do with the designation of the buttons. Most of the buttons were on master pages. But some pages have a different look on some pages. So I turn on the master page to the page level button. Once this happened, he changed the name of the button. Because I'm using the function "Export to the book in PDF format", where this has been done in other ID files in the book, there was conflict in the naming of the buttons. Once I renamed the buttons with a unique name, they came on the page.

• stage of preparations for the installation of a RAC cluster

  OS: Redhat 5

  cluster version: 11204

  So my question here is, what should I use to ssh user equivalence?  in the installation, should which node name I put runInstaller?

  Thanks in advance for any help.

  Hello

  Please follow the steps in the Note 852350.1 - configure SSH to restrict the Oracle user to member nodes in the CCR to get rid of this problem.

  See you soon,.

  Krisz

• vCenter Operations Manager 5.7 is now available

  vCenter Operations Manager 5.7 is now available

  https://my.VMware.com/Web/VMware/info/slug/infrastructure_operations_management/vmware_vcenter_operations_management_suite/5_7

  https://www.VMware.com/support/vcops/doc/vcops-57-vApp-release-notes.html

  What's new:

  More flexibility with capacity planning

  • Capacity Assess risk and plan of distribution and effective demand: define your varied business needs-based strategies to assess the risk of the capacity, efficiency and forecasts. For example, different pads, too commit thresholds of alert, schedules, reports, etc., in production and test-dev environments.
  • New views for Cluster capacity risk: identify quickly via color view of risk of ability to Cluster clusters grouped by commercial criteria, etc., are threatened by ability - right size faces a deficit of capacity now or in the near future, or all simply not.  Down for each cluster in Cluster mode risk detail to analyze what resource is forced on and why.
  • New common environments and workloads policies: new policies of out-of-the-box, such as the Production and Test-Dev strategies, enable a quick installation of the capability settings of Operations Manager to vCenter for types of common environments. Additional new out-of-the-box policies, such as batch workload, interactive workload and political to ignore the virtual machines, help to refine the ability of law with precision settings dimensions and analyze different workloads based on their performance characteristics.

  Improved self-monitoring

  This version introduces new diagnostic measures to monitor the health and availability of the components of Operations Manager vCenter, such as analytical, collector, Active MQ, Web server, database, and operating system.

  Widgets with flexibility and ease of use

  • Health Tree Widget: facilitate the visualization for a large number of objects.
  • Generic Widget Scoreboard: graphics support Sparkline, metrics channel and filtering by resource settings.
  • Metric Sparkline Widget: configurable color ranges and units, are supported for the type of resource and the label.
  • The resource widget: customizable to add parameters beyond health.
  • Top-N analysis Widget: support to the analysis based on the most recent values.

  New personalized relationship Widget

  To create a view hierarchy and the relationship of custom resource, like the current view out-of-the-box vCenter server.

  Great custom user interface to import and export of edge changes and indicators

  • Changed export of binary (.bin) format in XML (.xml): synchro .bin file formats are still supported for backward compatibility.
  • DBCLI improvements: programmatically import and export Super Metrics.
  • Pre-population of the dashboard during import objects.

  Balanced profile Metrics

  This version introduces a new metric profile that signals a small set of parameters. Increase the scalability of vCenter Operations Manager to support more resources by changing the metric profile in the new "Balanced" profile in vCenter operations Manager Administration.

  VMware vCenter Navigator Infrastructure-filtering capacity

  You can configure display it resources discovered by vCenter Infrastructure Navigator in vCenter Operations Manager. This version introduced a feature of configurable Infrastructure Navigator vCenter adapter filtering to control the service and Application reporting of Application resources. For each resource type, you can set up a "black list" or "whiteList" filtering in the filterList.txtconfiguration file.

  • black list: the Infrastructure Navigator vCenter adapter ignores the specified entries. If a name of Service Application or an Application name is included in the "black list", it is not reported by the adapter to Infrastructure Navigator vCenter. It is the default setting. The Infrastructure Navigator vCenter adapter filters unknown names of default Application services.
  • white list: Infrastructure Navigator vCenter adapter reports only the specified entries. If there are no entries added to the white list mode, none of the resources of the resource type matching appear.

  New browser support

  This version adds the new support for the following browsers: Apple Safari version 6, 24 and 25, the versions of Google Chrome and Mozilla Firefox 18 and 19.

  Strengthening security

  This version includes the additional security and increases compliance with the directives of the Defense Information Systems Agency (DISA) and the technical Guides (STIG) implementation of security.

  In addition to the groups in vSphere UI are now supported all the properties of the adapter for VMware-based rules.

  Hope this will be useful.

  Thank you

  Alex D.