Navigation restrictions

Similar Questions

• Configuration of navigation restrictions?

  Hello

  I am doing an application using DPS with images zoomable the only means, that the user can navigate to another page by clicking on the buttons. With other words, know DPS I don't want the user to be able to scroll down to the next page or on the side to join the next article?

  For example, how we navigate this Web page: www.anatomypunk.com

  Please help me, I'm going crazy with this

  Tim

  There is no way to disable the navigation by scanning. There is a solution, however.

  Place a full blank screen MSO on each page the value in use to move to the next slide.

• Restrict possible seekbar navigation?

  With the help of CP8

  I have a client who request the withdrawal of the progress bar because they don't want to the learner to be able to jump in front of a bunch of content. I like having the progress bar as it indicates the progression and the AIDS to navigation.

  The only thing that stops the progress bar is used to skip past all the slides are quiz slides where the learner is required to answer the question before them. Is it possible simulate this for the non-quiz slides so that the learner can not draw the progress on several slides bar? So clicking on an object such as a button ACCORDING to "submit the right answer" for this slide?

  This is a repost of my solution that works to restrict navigation. Creates a new so I could not change the original message.

  You would follow this procedure to prevent someone from using the seekbar component jump over several slides in time.

  ------

  A nice enough to do this for my case solution. I think that this only works if you use the buttons/objects on the screen to navigate vs using the button Next on the PlayBar.

  • When you create a button NEXT , go to the reports section and check the box include in the questionnaire . You'll want Next on each slide button to have it.
  • I unchecked both the 2 boxes below. You have to have at least a point.

  

  • In Preferences-->Quiz--> Reporting, uncheck the activate this draft declaration for
  • In Preferences-->Quiz--> parametersin the required list, choose the entry "answer all...» ».
  • Clear the other check boxes as needed.
  • In Preferences-->Quiz--> success or failure, put 0% or more of the total number of points to spend and change If lack of rank in infinite attempts.
  • Hide the Quiz results slide

  Now, if a learner trying to rub past any slide it is on, they will not be allowed to.

• Restrict navigation on the basis of the value

  There is a table beg. If the vendor line status is DRAFT or NEW, then only I will be able to see the details of it by clicking a commandlink. To do this, I had joined a listener to get the value of the property #{rank. Status} and then writes the code logic in the commandlink as ActionListener property below.
  

  public void moveToDetailPageBasedOnStatus(ActionEvent actionEvent) {
          DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
          Map map = bc.getParametersMap();
          String status = ((DCParameter)map.get("p_status")).getValue().toString();
          if (status.equals("DRAFT")) {
              FacesContext context = FacesContext.getCurrentInstance();
              context.getApplication().getNavigationHandler().handleNavigation(context, null, "create");
          } else {
              FacesContext context = FacesContext.getCurrentInstance();
              FacesMessage msg2 =
                  new FacesMessage(FacesMessage.SEVERITY_INFO, "", "User can see the details of an Issue in DRAFT Status only.");
              context.addMessage(null, msg2);
          }
      }

  Then I read the comment by Frank Nimphius in the post below, saying that "+ why don't you use a method call or (even better) activity a router) if it is to lead users from different points of view? "The approach to the use of HandleNavigation is not optimal.
  

  FacesContext context = FacesContext.getCurrentInstance();
              context.getApplication().getNavigationHandler().handleNavigation(context, null, "create");
  
  http://www.adftips.com/2010/10/adf-ui-navigating-to-next-page.html

  While I'm him pass a parameter to a delimited taskflow where I am setting a parameter of pageFlowScope and then developed a method call activity, set it as the default activity. The code is almost the same thing.
  

  public void checkIssueStatus() { 
          String value = (String) ADFContext.getCurrent().getPageFlowScope().get("p_status");
          if ((value.equals("DRAFT")) || (value.equals("NEW"))) {
              FacesContext context = FacesContext.getCurrentInstance();
              context.getApplication().getNavigationHandler().handleNavigation(context, null, "checked");
          } else {
              FacesContext context = FacesContext.getCurrentInstance();
              FacesMessage msg2 =
                  new FacesMessage(FacesMessage.SEVERITY_INFO, "", "User can see the details of an Issue in DRAFT Status only.");
              context.addMessage(null, msg2);
          }
      }

  The problem is where the p_status isn't NEW or PROJECT, the message is displayed, but then detail page also shows. I just want to display the message only and not navigate to the next page. How to solve this problem?
  
  And the big question: are my approach correct and optimal , this time?

  Hello

  You can use your source code for the action, event,... just change the action of the link in actionListener.

  Reference: http://andrejusb.blogspot.in/2011/10/how-to-disable-action-conditionally.html

  Thank you
  Rajdeep

• restriction of navigation

  Hello

  I have a screen where I have a search field then the field added to verticalfieldmanager and the screen.

  I don't want the cursor to navigate in the search box, but only in the field from the list. but when I start typing, shd key type in the search box, how?

  I did it myself clear with the requirement of hope.

  thx for taking a peek

  ~ Jean

  There must be many ways to do this.

  One possibility is this: make the search box (EditField or similar) NON_FOCUSABLE and do all the manipulation with the text of the ListField. Override keyChar in the ListField and imitate the appropriate reaction to it in the search box using searchBox.setText.

  The downside is the fact that TextField and his descendants tend to rearrange the entire screen in their setText method, making any key a relatively expensive operation.

  Another approach is to do just the FOCUSABLE search box and follow the development of the ListField by selecting the line to be 'in focus' and paint differently. You must then replace navigationMovement in your search box and manage vertical movements separately, delegating to the super.navigationMovement horizontal. If you use this approach, you will probably have to manage scrolling of the ListField (you add it to a separate VerticalFieldManager, aren't you?) by programming with setVerticalScroll on his manager.

• Disable the navigation picture in iOS 10 messages

  iOS 10 introduced photo and navigation in the application message application - we have limited these capabilities on our devices by disabling safari and app downloads. I see no parameter in restrictions that would allow me to do the same for messages. Is this fixed in a later version?

  You can simply turn the stop function by clicking on the four circles at the bottom under the App section side, pressing on manage and turn off #images.

• There is no search icon in my navigation bar

  cannot search for books. There is no search icon in the navigation bar.

  Open tap to the general settings, choose Restrictions, press set iBooks Store 'stop' - If you show up then it 'on' and the legs should reappear in the iBooks app.

• Adjust the URL boxes & search on the Navigation bar for different widths and the wider area of URL provider.

  Years my URL address in the Navigation bar has stretched far enough to allow most of the display URL. An icon and then reload, the box of search engines (Bing, dictionary, etc.) would be about one-third of the width the area URL. After that, the rest of the bar is used for House/bookmarks/history/etc
  Now, without knowing when it emerged, the URL box is too narrow to see but a few letters of the URL that is registered and its menu drop-down is the same. I can find no way to expand it. Everything works fine, but I would like to have the views appearing as before. I kept all the most recent updates and version 20 now. I don't think that has happened because of the update - at least not immediately. As this happened, my Bookmarks Toolbar disappeared. I made sure that the bar has been verified and manually put all the bookmarks that I had. It's OK now. I thought that the way back that could replace the cursor to a point on the side of the boxes in the Navigation bar and get an arrow icon that would expand or restrict the boxes. I'm not sure about that, but I know that it doesn't work like that now. Any help would be certainly appreciated! Thank you.

  I did not send photo since the default restore and put back old icons worked this time. I had tried with attention before, but the spinner was still missing then. Thank you for your help. CFB-

• can someone tell me how to permanently remove the navigation bar so that a user cannot set himself back. I don't want users to be able to navigate to the local c:\ through this navigation bar. using firefox 7. Thank you

  I locked a customer using the editor of strategy for Windows 7.
  and I want to restrict a user to a site only via a shortcut of firefox on the desktop and restrict their access on the local system drive that is currently vulnerable using the navigation bar. I know not how to do a right click and rmeove, but the user can put this back calm down easily and then locate anywhere on the local computer or the web.

  Even in this case, it will not work.
  
  If the address bar is hidden so that you can use Ctrl + L to make appear a window with an address bar.

  You would probably need to run Firefox in a sandbox that does not allow access to the local file system to get this working properly.

• Windows Media Center - Internet TV - availability and navigation of the full episodes.

  With regard to the full episodes of Windows Media Center - Internet TV.

  I've seen a few questions about this in the Microsoft Answers forum, but 2 / 3 times the official response was unrelated to the question asked. So, to be clear, I'm not talking about watching live TV, navigation in my TV guide, TV recording, or watch recorded TV shows. It's strictly about the availability of the property and to navigate to find full episodes on Internet TV.

  There are a few ridiculous clips ginormous and only a small handful of full episodes. I hate clips. In a busy life, they are the opposite of the useful. So, instead of going through every single show individually to see if it contains full episodes, I want a way to browse shows with full episodes. Is this a problem of training or an enhancement request? Is there a way to filter the full episodes only?

  I would also like to be able to filter my search of full episodes. It seems ridiculous to me if I want to just full episodes, I have to go through a long list of clips in the search results to find. Again... ask for the issue or the development of training?

  I'm also confused why some shows that have full episodes on the site of the network do not have full episodes in WMC Internet TV. I know it's a matter of content and perhaps not something, you can contact... is it be restricted by networks?

  Thank you!!

  Hello

  All the content comes from the provider.  I hate watching the clips too and there is not much Microsoft can do about it. It is sometimes frustrating to go through all the clips to find full episodes. The only thing you can do is to provide feedback to microsoft to enhance the functionality of Media Center search to find full episodes.

  Provide your feedback on this link-
  www.Connect.Microsoft.com

  I'm sure that there are many ppl who like to have an option like this!

• BlackBerry Smartphones ATT "free navigation?

  I've heard of some people that there "free navigation on the internet" for my Blackberry since I use AT & T. Is this true? I won't begin to go on the internet with her think that it's free and then receive a huge bill. If it's free, are there restrictions?

  Twizter,

  This issue is the best answer to your wireless provider. To support various functions, including browsing the internet, you will need some type of data plan on your device.

  Normally, this comes in two flavors BIS/Personal or Enterprise. Unless you are going to connect with exchange e-mail service, you can choose the least expensive option.

  Hope this helps,

• APEX 5.0 - Position Navigation menu (top / side)

  Hello

  
  

  I use the universal theme (42) in APEX 5.0 and I have a list of said Navigation

  List1 - this list consist say consist of a list entry 3

  Home - no parent - target - 1 page

  Child - Parent (home) - target - 2 page

  Page big child - Parent (child) - target - 3

  When I use the position of Navigation - side

  All the three list entry works fine, I mean when I click on home or child or Grand child he goes to the respective page of 1, 2 and 3.

  When I change the position of Navigation in the top

  -entry of the list two works great – when I click on home or big kid, he goes to the respective page of 1 and 3.

  - BUT when I click on child (2nd entry list) - is not a nothing, it goes to Page 2. - WHY?

  WHY the child (2nd list entry) - works very well with the position of 'Side', but does not work with 'Top '?

  Thank you

  Deepak

  The answer is simple. Sub menu items have no other action that open the submenu so that they cannot navigate. The top-level menu items allow the features of split where they can navigate and fall down. This behavior of the higher level menus is an extension to the traditional menu of model Office UI.

  The key is that you have to adjust your navigation lists as you spend on the side and in the top navigation.

  More details. Side navigation and navigation bar are the two types of navigation, but they use different user interface controls. (This applies to what is in the default universal theme. I guess that you can replace the list templates with your own that implement models of other UI.)

  Navigation bar is a control of the user interface of the bar menu and closely follows the model of long standing and well established applications of office for menu bars. With two exceptions, items in menu 1) split where the menu bar may as well perform an action such as navigate to a page or the drop down menu 2) indicates the element menu 'in progress', making the menu a little service as a tab control. These exceptions have been made to account for legacy menu usage used in the report designer patterns.

  Side navigation is a tree with fancy css/javascript UI control for it has a reduced mode and move the expand/collapse button to the right. The trees have no restrictions on a node that is able to navigate and contain children nodes.

  The two types of navigation are based on the APEX of the lists. What distinguishes them is where they go in the page template (top/side) and what list template is used. APEX lists know nothing about the kind of model they will use. Different models have different expectations on the list. For example, some models are flat, and some expect the nested lists. The situation you describe is a case where the list of menu bar template will effectively ignore any navigation link on a non level list item that has children.

  Kind regards

  -John

• Adobe Muse - pinned Navigation acting weird

  Aloha,

  For some reason, browsers of some sideways scrolling system configuration when going down to an anchor of navigation "pinned". I have no idea why this is happening. I've used the same configuration and code for muse adobe for nearly 3 years now no problem

  For some reason, this page gives me grief.

  http://www.huichawaii.org/ahse2015p.html#top

  I can't really say it's the browser, I tested it on several machines. Some machines, it does to some no. machines. And Yes, I've updated the browsers on it.

  Thank you for your help.

  

  Muse scrolls to try to anchor in the upper left corner of the browser window.

  If the content of the page is widget to the width of the browser window, scrolling at anchor may involve in vertical and horizontal scrolling.

  The best way to reduce to a minimum any horizontal scrolling is to put all anchors in the same position "x:" and have a relatively narrow maximum width for all the content on your page (i.e. 1280, 960, etc.). He appears to have artificially disabled of the horizontal scroll bar and tried to add some custom styles, but the content of the page is still very wide (~ 1700px). I recommend you all objects that are far away from the page to the right. If the content is restricted down to the width of the page, you want to get a horizontal scrollbar and you should remove the custom code this way will interfere with the normal functioning of the page.

• Alternatives to bar Spry for navigation

  I love the bar spry, but when I saw my page in Explorer I get a message saying: "To help protect your security, Internet Explorer has restricted this webpage from running scripts or ActiveX controls that could access your computer", and the submenus drop down do not work.

  It is easy for me to simply click on the message and say 'allow content blocked', but I don't want to create an unnecessary barrier to our users. Is there another way to make a navigation bar that will not create this problem in Explorer? Or a way to change the bar spry code to eliminate the problem?

  Thank you!

  You can create menus nested with just CSS if you understand it well enough.  I tried to play with it, but it's true, Spry was faster.  This http://www.duoh.com/csstutorials/2levelmenu/index.html guy set up a sample of a horizontal menu of only CSS with the style sheet for the people begin to practice.  What makes Verticle is just a matter of changing some attributes.  It is easy - once you get the hang of it.  =)

• Next element required when-validate-Item Triggers - navigational aid & key

  Hello. I use historically when-validate-item triggers to validate the data entered in an item. If the validation logic fails, so I can "Raise Form_Trigger_Failure;" and the person should attempt to return a valid value before arriving at the order of the day.
  
  However, in the form that I create now I need to validate the value entered and if it does not reach the validation logic, then I need to move the cursor to another element where they are required to enter into an explanation of the value, they came at the start. It is a big problem that I can not use 'go_item()' to a trigger "when-validate-item." Then I can just move the validation logic in a "next-key" trigger, either because the user could accidentally bypass the validation if logic they mouse out of the field rather than press the tab or enter keys.
  
  How can I accomplish this? When my trigger "when-validate-item" fails while I still have to move the cursor to another element. Certainly there must be a way to solve this problem. Please let me know your thoughts. Thanks in advance.

  Yes, you understand correctly. Only, don't code the validation in the trigger on validation, since built-ins restricted (as go_item navigation controls) are not allowed. Our forms are always the moment of validation of fixtures in a procedure known as the trigger of the validation key. Once the validation key trigger executes all changes (and they do not stop because of a Form_trigger_failure increase), it then issues a Commit_Form;

  If you have a 'save' button or something similar that makes a commit_form, then his trigger when key pressed, just not a Do_Key ('Commit_Form'); Who will ensure that your key trigger - Commit and his appeal to your edit, will be carried out.

  In addition, Andreas's suggestion above is good, too, although our forms don't do that. Only downside, is to create a completely separate and independent form.