Configuration of virtual switches that are not updated
In a vSphere infrastructure 5 based on 2 servers ESXi 5, I moved a few virtual machines to one virtual switch to another.
Virtual machines work very well.
If I use vSphere client and look at the configuration of the hosts (host and cluster-> Configuration-> Networking) I see some VM as they were connected either the old virtual switch and the new virtual switch, while they are only connected to the new virtual switch.
I press "Refresh" without any result.
If I look at the properties of each virtual computer, I don't see the link to the new virtual switch.
How can I solve this problem? It is dangerous, even if it does not affect VMs or virtual switches, because it can make operators make mistakes...
Concerning
Marius
Nothing dangerous. You probably have Active snapshots on virtual machines. Once the snapshots are deleted, the 'old' vSwitch and port group will disappear.
André
Tags: VMware
Similar Questions
-
The features of virtual machine that are not supported or disabled material...
I get this error when I try to migrate virtual machines from one host to another.
but some other virtual machines to migrate.
What's wrong? I have
and if the reason EVC mode I think that I can not migrating other virtual machines, am I right?
Jokerciitaw thanks for the reply, but I can't understand if you're right... How can I migrate some other virtual machines?
-
Models of virtual machines that are not visible after reinstalling Virtual Center
Hello
I can see patterns in data warehouses, but not covered by the option "display" under models and virtual computers?
This happens sometimes. You can browse the data store (s) in question, right click on the file .vmtx and add to the inventory?
-
Question: We have configured replication vsphere in our environment and when replication is triggered according to the OFR start us below the questions on the virtual machines that are configured for replication.
Version for esxi: Patch 5.1 level 7
Virtual center of version 5.1
Source of storage - IBM v7000
Destination storage - Hitachi
Questions:
Events of breach RPO
Consolidation for the VM disk failure
Delta abandoned events
Time change events
NTFS error and warning (event ID: 137, 57)
RDP disconnect and ping does matter
Standby error
Volsnap error
Stop the server and offline issue
Install vmtools emits automaticallywell, in this case, we need to disable the standby of the end of the replication.
So that everything in triggering replication does not trigger the snapshot of the suspension.
Then test the if you get these errors.
-
Not possible to export a list of virtual machines that are created in the past 7, 30, 120 and 180 days since an imported csv file containing the date of creation of virtual machine. My questions is the correct statement to the variable: $VmCreated7DaysAgo: $_CreatedOn "-lt" $CDate7.
# #SCRIPT_START
$file = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\VM-Repo.csv".
$Import = import-csv $file
$VMCreatedLast7RDayRepoFile = "C:\Users\Admin\Documents\WindowsPowerShell\08-18-2014\Last7Days.csv".
$start7 = (get-Date). AddMonths(-1)
$CDate7 = $start7. ToString('MM/dd/yyyy')
$VmCreated7DaysAgo = $Import | Select-object - property name, Powerstate, vCenter, VMHost, Cluster, file, Application, CreatedBy, CreatedOn, NumCpu, MemoryGB | Where-Object {$_.} CreatedOn - lt $CDate7} | Sort-Object CreatedOn
$TotalVmCreated7DaysAgo = $VmCreated7DaysAgo.count
$VmCreated7DaysAgo | Export-Csv-path $VMCreatedLast7RDayRepoFile - NoTypeInformation - UseCulture
Write-Host "$TotalVmCreated7DaysAgo VMs created in 7 days" - BackgroundColor Magenta
Invoke-Item $VMCreatedLast7RDayRepoFile
# #SCRIPT_END
You can use the New-Timespan cmdlet in the Where clause, it returns the time difference between 2 DateTime objects.
An example of this cmdley
New-TimeSpan-start (Get-Date). AddDays(-7)-end (Get-Date). Select days - ExpandProperty
In your case, you could do
Where {(New Timespan-démarrer ([DateTime] $_.))} CreatedOn) - end $start7). {7 days - gt}
But beware of negative numbers.
-
Smart playlists are not updated on Ipod classic
I have the latest Ipod classic 160 gb (7th gen?) with a couple of smart playlists on it. These selections are not updated on the fly on the Ipod. I don't know if they're supposed to, but I guess that if. They are updating on iTunes but I shouldn't need to sync to update the smart playlists, otherwise, they are not so smart than that.
Any help? Thank you.
Smart playlists act as regular playlists on the iPod. They are only "smart" (automated) in your iTunes library on the computer. When you sync the iPod, the changes you made on the iPod, like song of note or play counts, syncs to your iTunes library. Update Live immediately updates your smart playlists properly, and they are synchronized to your iPod with all changes (during the same synchronization).
-
Read VeriStand channel from inside the custom device that are not part of the custom device?
Is it possible to read VeriStand channels from within a custom device VeriStand (RT Driver) that are not part of this custom device?
For example, suppose I want to be able to configure a channel in my custom device to always be twice the value of a string of material that my user selects (I know, better/more simple ways to do this, but this is just a simple example ). Can I do this from the device custom without programmatically create a mapping of the system? (I've done this before and it is messy and VERY prone to error of the user).
Thank you!
good point
the channel ID (U64s) are not the same in the engine config of vs. Instead, you must set 'references to dependent item' in the config and then get these references in the engine.
See the source jarrod linked, which makes it
-
When I run a health check on hp I have a full page of items that will not update some goes for updates of windows. but he said that the hp site may be down, or I can't connect. but I called hp and fought with them for 3 days and I'm tired of fighting with them, I have 4 children that I can't afford to pay for something from someone maybe able to help for free.
Hi Jbarizona,
Thank you for visiting Microsoft windows Vista answers Forum.
A. what operating system you use?Method 1: make sure that the necessary services are available and running
For Windows Vista, follow the steps below:
To ensure that the necessary services are available and running, as follows:
1. Click Start, type services.msc in the search text box, and then click services.msc in the list programs. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
2. double-click on Background Intelligent Transfer Service.
3. If the start State lists Stopped, click Start, and then click OK.
4. double-click on Windows Update.
5. If the start State lists Stopped, click Start, and then click OK.
6. double-click on my computer.
7. If the start State lists Stopped, click Start, and then click OK.
8. close the Services window and try to install the updates again.
Note: If the Background Intelligent Transfer Service does not appear in the list of Services, click the following link to view the article on the Microsoft web site and download the update:
http://support.Microsoft.com/?scid=http%3A%2f%2fsupport.Microsoft.com%2fkb%2f939159%20%2fen-us
Method 2: Download and install the Windows Update Agent
1. download and install the latest Windows Update agent. Click on the link below to view the corresponding article on the Microsoft web site:
http://support.Microsoft.com/kb/949104/en-us
2. once the Windows Update agent is installed, try to install the updates again.Thank you and best regards,
Vijay - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I had a lot of trouble with my vista system (the most recent is an error code 80070017 when you try to install the update IE-9). I ran sfc.exe/scannow and have a CBS file with several currupt files that are not fixed. I'm over my head from the experience now. Can someone help me? Thank you!
Original title: Vista files corrupt
Try to run in safe mode.
If there are files corrupted again after that, you can mount the image file .iso for the same version of Windows, you probably Vista SP2 - OR - put the disc in the drive.
(Make sure same version x 86 or x 64 also!)
Then use 7zip to look in the file \Sources\install.wim for files without a problem. Copy and paste from here directly on those on your HARD drive.
-
way to find vm that are not removed from disk
Is it possible that I can find, vm that are not removed from disk
That is to say that "take inventory" but I forgot to remove the disc.
Thank you
If you only need a report, you can do it like this (I've made a few changes to your script).
$unregistered = @)
foreach ($Datastore in (Get-Datastorecluster xxxx |)) Get - Datastore)) {}
# Collect .vmx paths of virtual machines stored on the data store
$registered = @ {}
Get - VM - Datastore $Datastore | %{
$_. Extensiondata.LayoutEx.File | where {$_.} Name - like "*.vmx"} | % {$registered. Add ($_.) Name, $true)}}
# Set up the search. VMX files in the data store
New-PSDrive-name TgtDS-site $Datastore - PSProvider VimDatastore-Root '-' | Out-Null
$unregistered += (@(get-ChildItem-Path TgtDS:-Recurse |)
where {$_.} FolderPath - notmatch ".snapshot" - and $_. Name - like "*.vmx" - and! $registered. ContainsKey ($_.) DatastoreFullPath)} |
Select DatastoreFullPath))
Remove-PSDrive-name TgtDS
}
$unregistered | Export Csv c:\temp\vm-unregister.csv - NoTypeInformation - UseCulture
-
I want to see just all the Photos that are not in an album - possible?
Hello
is it possible to see all the photos that are not in the album?
Photo on Mac
THX
Stefan
Yes, create smart albums with the rule 'Album isn't everything. "
For the file menu: file > new Smart album
This album will contain all the photos that are not in any standard album.
-
First of all, I can't find a top of icon delete or bottom or anywhere. Secondly, when I'll be that solved how can I remove a number of emails that are not in consecutive order.
You can click with the right button on the e-mail toolbar, select Customize, find the Delete button and drag it to the toolbar.
You can activate the message pane by using the F8 key and use this header button.
You can right-click on the message and select Remove.
You can also use the Delete on your keyboard key.To select the messages you use standard Windows selection methods.
Hold down the control key while clicking on messages to select random messages. -
How can I see the photos that are not in an album?
How can I see the photos that aren't in an album in the App "Photos"? I noticed that in the Album 'Pictures' are pictures I thought I deleted already. I would like to see all the photos in an album, so I can finally delete them.
You can go the the file menu Photos and click New Smart Album, and then set the condition of Album - is not. This will create a smart album that will show you all the photos that are not in any other album.
-
IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?
Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:
https://support.Apple.com/en-us/HT204306
You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.
Good luck
GB
-
I have over 500 GB of music on my Mac, so I create a playlist for the songs I want to sync my iPhone. Yet when I look at my phone, there are many songs that are not in sync would be playlist. They cannot be read unless the phone is connected to my wifi at home, but I don't want them cluttering up my phone and makes it almost impossible to find the tracks I want to listen to.
I hate the new music app. For the first time since I converted to Apple 10 years ago, I wonder if I can be forced away because it's so horrible. Why ruin a great product with terrible software? Anyway, if anyone can help me to fix this serious bug, I would be very grateful.
If you go to the library of the screen and press the red text just below the icons of the album/playlist (where you select whether you want the screen to show the view of the artist/Album/songs downstairs there is a toggle to only show that downloaded music.) If you enable this, then only the songs that are actually ON your iPhone will be in BLACK characters. The rest of your music library to iCloud either won't display at all or be grey. Now - if you have a few streaming, you can see more songs, because the songs that are heard are cached in the memory of the iPhone box and supposedly deleted automatically when it fills up (but not user accessible unless you use some third-party programs).
What you can do - so they need WiFi or data cell-, it's make a playlist in iTunes that you want on your iPhone. Then (assuming that Apple music and iCloud music library are running on both), you can go to the playlist and press the small cloud/down arrow icon and download these tracks on your iPhone. Then, you can play these songs without access to wifi or cell phone.
Maybe you are looking for
-
First external USB disk backup from Time Machine and Time Capsule
I have a new USB drive from 4 TB to use for backups Time Machine plugged on my almost full Time Capsule. The Capsule is connected to my network using Ethernet, so it can be used to back up my MacBook Pro and iMac (via ethernet) (wireless). I would l
-
How can I change my security questions if I don't have the good e-mail? o
then I tried to buy a subscription to Apple's music and apple said that I had to answer my questions of security, but the thing is that I never put those in place when I asked to reset these security issues that it sent the reset link to an email tha
-
The HP Envy 15-ae101nx laptop: Hp Envy 15-ae101nx laptop battery problem
Hello world I have a problem to find my battery place where I can remove it because I want to use my laptop directly using power adapter. also I heard at the lower right of the laptop a sound as if something has stopped forcebly I fear it may related
-
Remove remove programs, rarely used in the window and an add-in
The program 'Catalst ATI Control Center' is rarely used in Add and Remove Programs window, does this program can be safely uninstalled? And if so,. What do I have to use ' ATI-Software Uninstall Utility ' which is just above him? I watched this pro
-
can I print the JPEGs with the title in the image
I print some *.jpg images using the photo viewer and Windows fax. I put 18 photos on each A4 sheet. Is it possible to add the title of each image in each image file for example can image_1765.jpg automatically added to the image. I have around 200 ph