Configuration of WiFI AIR-BR1310G-A-K9-R encryption

Similar Questions

• My iPad WiFi Air video very slow loading same 3 full bar signal

  My iPad WiFi Air video very slow loading same 3 full bar signal... Any suggestion?

  Should I send to AppleCare or upgrade to the latest version of iOS?

  Yes, update to the latest version, 9.3.1. Also here are a few general suggestions for problems of Wi - Fi. Suggest you start at the top and down, maybe they'll help...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• PIXMA PRO 10 can not configure for WiFi

  Everything works fine on USB key, but I can't seem to configure for WiFI. I am using the recommended network driver

  MP68-victory-mg3200-1_02 - ejs.exe

  but for some reason some it does not detect the network. I use Xfinity and have the router SMCD3GNV. I have a printer HP on WiFi but no luck with this one. I don't have the original CD that came with it I bought it used and the seller couldn't find. Is there a better network driver? Thanks, Jim

  Hi, Jim!

  Thanks for posting on our forum! This community is designed for Canon owners your colleagues help each other any problem they may encounter. If it is a question of time-sensitive, contact our technical support team at the United States is the most effective way to get these issues straightened. They are standing, ready to help you 24/7 by Email http://bit.ly/Canon-Support or by phone at 1-800-OK-CANON (1-800-652-2666) Monday to Friday between 10:00 and 10: 00, et (07:00 to 19:00 PT).

  Thank you and have a great day!

• Cisco suggested cable does not? (Cisco Air-Br1310g-a-k9-R and Ant24120)

  Hello

  I bought 3 Cisco Aironet 1310 Outdoor Access Point/bridge - wireless access point (AIR-BR1310G-A-K9-R ) and 3 Cisco Aironet 2.4 GHz 12 dBi Omni Mast Mount antenna w/RP-TNC connector (AIR-ANT24120) .
  But the antenna cable is very short (1 ft.). so I need a cable extra. I read the newspapers and they said AIR-CAB020LL-R is suggested by cable for ant24120. But when I look at the pictures of this cable I saw this cable has two side RP - TNC female.
  
  
  The access point has the male Ant. side and the next female ANT24120. So, how can I connect this side 2 (MF) with a wire from the female side 2 (FF)? I'm so confused.
  Please can you suggest me a cable to connect this access point to this antenna.
  Thank you very much.

  Hi Bulent,

  This cable has 1 female and 1 male connector

  Intake AIR-CAB020LL-R of interconnection cable low loss of 20 feet, a RP - TNC,.
  one outlet RP - TNC

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.PDF

  AIR-CAB020LL-R / AIR-CAB050LL-R

  Here are the cables RMT 400 Style with TNC reverse polarity of the connectors at one end and TNC female connector reverse polarity on the other end.

  http://www.coaxplanet.com/CrossReferences/CiscoCrossReference/AIRCAB020LLRAIRCAB050LLR/tabid/265/default.aspx

  See you soon!

  Rob

• I have apple ipad wifi air but act. Address ı have forgotten

  Hello

  I had bought an i pad wifi of sudi Arabia air, ı am from Turkey, after ı ı Turkey forgotten first lock from apple after ı started the repair mode, but he asks address different acitiviton ı have nothing in my hand do but ı am an apple user ı ı phone 4s, 5s and 6s and also my family has ı phone 6 s 3-4 pcs we are no thief , but we are human, we forget our passwords or emails same sth the ı can not remember which address ı wrote he won't start [email protected] ı ı the password just what ı registered mail it. How ı do now I have

  Are you still connected to the account anywhere so that you can look it up? Or do you have account downloads in your computer's iTunes library so that you can do "get info" on them and see the id? If not have you tried: If you have forgotten your Apple - Apple Support ID ?

  If you can't find always her, and if you were the original purchaser of the iPad (i.e. it has not bought used) then you could try to go to an Apple Store (make a Genius Bar appointment if you do) or try to contact iTunes Support Online (https://www.apple.com/emea/support/itunes/contact.html) and see if they can remove the iPad on the account - they are likely to want to see proof of ownership before they could help for example an original receipt with the serial number above

• Configure iphone wifi calling

  Hi here I have a netgear wifi router wnr2000

  We are able to get the wifi wifi callig but the iphone does not

  all pls help me to solve this problem - need to configure wif calling in iphone 5 s

• Color laserjet mfp m177fw pro: configuration of WiFi M177fw

  Were vain in finalization of setting up wireless Internet to my laptop.  Even if the dialog box recognizes etc. of the connected access point configuration and the printer is already working on wifi, the research process fails.  Tried to manually set up so as to leave the software identify.

  Have also the printer connected to a laptop W7pro, which took several attempts, but finally a "wife".

  System says I have the latest version of the software on the CD supplied.

  I was able to connect using the 'search network' option rather than the option 'Wireless '. He finds the printer connected to the modem.

• Questions of VLAN and configuration for Cisco AIR-CT2504-25-K9 Controller

  Hello

  It's my first time thanks to the Cisco wireless solutions, so I was hopping someone could help me with the following:

  We just bought the AIR-CT2504-25-K9 controller with some points of access for the AIR-CAP1702I-E-K9.

  The network is as follows:

  Peripheral layer 3 (managed by third parties): it's on the domain network. (VLAN by default, 1 - unidentified)

  ADSL router - it's the network without comment thread. (Default Vlan 4 - tagged).

  VOIP: VLAN 5.

  Both fittings go into a switch Cisco SG500 52 (Layer 2). There is a port to shared resources on the switch SG500 with VLAN 1 (Tagged) and VLAN 4 (with tag). The WLAN controller is plugged into this port trunking.

  The data and management network are in the same subnet and on the same VLAN (1).

  I used the wizard on the controller setup.

  There are three interfaces:

  management VLAN ID 1 IP 192.168.1.2 Port 1 (configured with a gateway domain network, DHCP, etc.).

  VLAN wireless identifier 4 IP 192.168.5.1 Port 1 comments (configured with modem router ADSL, DHCP, etc.).

  Virtual IP 192.0.2.1

  Proxy DHCP active overall.

  There are two wlan networks:

  (1) area - management Interface - SSID abc.

  (2) comments - comments Wireless Interface - SSID xyz (the wizard put to management, but I changed it to the wireless).

  Are the AP connected to another SG500 switch which is shared resources to the switch with the controller.

  Ports of the APs are connected to have only 1 VLAN unidentified. They don't have 4 VLAN Tag or not identified. However, everything seems to work as expected.

  When I join the guest network (SSID xyz), I get an IP address from the router ADSL and all Internet traffic goes through him. When I connect to the domain network (SSID abc), I get an IP address from the DHCP in Windows Server and all traffic goes through the device of layer 3 (I checked the public IP address in my browser). I can't ping anything from one network to the other.

  My questions are the following:

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Thank you

  A

  Hello

  (1) how the guest network traffic (VLAN 4) headed the APs controller when they are connected to the ports on VLAN1? Is it because the traffic is encapsulated?

  Yes, I'm with CAPWAP:

  More information: http://lets-start-to-learn.blogspot.de/2014/08/cisco-wireless-understand...

  (2) is set up correctly? After you configure the controller, I saw a note in the forums, this State I can simply enter 0 for the management of VLANS to let it not identified. However, in my case, I kept it as 1, which is the same as the switches and then the tag VLAN on the switch. In addition, the set Wizard wlan of comments to use the management interface but I changed it to use the comments interface.

  If you want that mgmt interface must be unmarked and then put 0 otherwise you can use vlan 1.

  I do not have what is configured under mgmt and comments interface, but according to the name I'll say yes, you must set the comments under comments wlan interface.

  (3) when I connect to the APs of the controller, I see several options that can be configured manually. Is it necessary for this? For example, there is an option of data encryption.

  Yes, there are many things that you can configure, but I'll leave most of the default of things unless you really need to change!

  The following best practices: http://www.borderlessccie.net/?p=270

  Concerning

  Remember messages useful rates

• Configuration of WiFi in Windows XP Mode (installed in Windows 7 Ultimate edition)

  Hello! All the:

  I use Windows 7 Ultimate on my laptop. I have used Windows 7 Ultimate using WiFi.
  I also installed Windows XP Mode.  I am not able to install WiFi in Windows XP Mode.
  Can you please let me know how to install WiFi in Windows XP Mode.
  Thank you and best regards,
  Shashi

  You can configure Windows XP Mode to use the shared network (NAT) and there is no need to configure an additional WiFi network. In this context, the network which is connected to the host (Windows 7 Ultimate), is shared with Windows XP Mode.

  Once Windows XP Mode is started (not available in full screen menu), go to Tools-> click settings. In the left pane, click Networking. Then in the right pane, next to 1 adapter: select network shared (NAT). Click Ok. Check if you are connected to the internet. If this isn't the case, restart Windows XP Mode and check.

• How can I configure my wifi network to the big house?

  We are in a House floor (including basement) large 4 4500 square feet.

  Internet comes home in the basement.

  From there I push a switch that distributes internet cable throughout the House.

  Everyone has now 15 years later, wireless devices.

  I have 5 Airport extreme, what is my best option to implement?

  I want to have the name of a network and a password.

  I would like to be able to move anywhere in the House and have internet without needing to connect to different networks.

  Any help would be greatly appreciated!

  It is the standard of roaming network.

  Wi - Fi base stations: install and configure a roaming network (802.11 a/b/g/n)-Apple Support

  Wi - Fi base stations: extend the reach of your network wireless by adding additional base stations Wi - Fi - Apple Suppo...

  Apple does not seem to have a newer version... in order to take the principles that are simple.

  Æ all have a simple base station name... I recommend names that are short without space and pure alphanumeric for everything... not to use apple recommended names in the utility.

  If you have AE1 - AE5.

  All units to create a wireless network... (More.. important to create not extend).

  for example AEwifi

  All units are configured with WPA2 Personal security and use same pure alphanumeric past 8 to 20 characters.

  All devices are set to fill mode, except maybe the main unit being used as DHCP and NAT router.

  Plug in ethernet in the appropriate floor and location.

  You now have a roaming network... It works great to move home with laptops... It may work less well with phones and ipads... It's Apple's fault for not allowing the device swap "tours" like on the side of the 3 G... You may need to turn on/off the wireless. I hope that one of these days the problem will be corrected.

• Questions to fill two AIR-BR1310Gs

  I configured two 1310 s according to the guidelines of this (http://cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008058f53e.shtml). The association seems to have occurred (the two APs say in their log book), but now I am unable to communicate with them about IP or ICMP.

  I have attached the configs for review. What I'm missing here?

  Try to copy and paste your key WEP times, maybe it has changed somehow. In addition, aaa new-model should not be enabled on non-root? AAA is unfortunately not my specialty, so I don't know if it is required in this scenario.

  What I would do at this point is start remove security until it works. Get rid of the RADIUS authentication first and see if they connect. Get rid of the WEP key, then see if it works. I hope that you will discover why they don't work that way. At this point, at least know that you are troubleshooting.

  Give that a try and let me know how it goes.

  Jeff

• Configuration suggestions wifi router for the best downloads for Folio Builder

  I was facing problems where my wifi router is not provides maximum download speed to download folios. Here I was faced with failure of network errors. All advice.

  Thanks for the tip of Bob. I went over the wired connection. The bug that

  has been bad, I hope that this was not the hardware, but the software as I

  guessed. Sometimes the characteristics of company boasts off fate a real

  pain. Thanks I'm fine now.

• FB4.5 iOS package configuration to use AIR 2.7

  Hi all

  I want to update my Flash Builder to make mobile connections Manager for Android and iOS uses the new AIR 2.7 SDK.

  How can I do this?

  I downloaded the AIR SDK 2.7, but the instructions say I need to use the command line - but I would like it is integrated into my version of FB4.5.

  Please notify.

  Thank you!

  According to this article, Adobe will release the update of real FlashBuilder this month...  http://blogs.Adobe.com/flashplayer/2011/06/Adobe-Air-2-7-now-available-iOS-apps-4x-faster. html

• I have a residential group put in place but apple of my wife air does not recognize and it cannot use the network printer

  How can I solve this problem?

  Only Windows 7 computers can join a homegroup.

  You need to set up a working group for non Windows machines using the network functions.

  And if you have a network printer suitable, then it should not matter what OS you have as long as it has drivers for this printer. I guess that you have a SHARED printer and not a network printer in your question?

• How to configure Thunderbird to send messages that are not encrypted unless I want them to be?

  I have Thunderbird set in place through gmail with enigmail and gpg4win 2.2.3 on a windows 7 64-bit operating system. I went through the Enigmail set up Assistant and unchecked 'encrypt by default', but it still sends encrypted E-mail. What don't I do?
  Thanks for help.
  Dave

  Yes, I chose the convenient encryption settings. In fact, I tried both, just to be sure, but thank you. You're in the right area and I found a way, but I'm not sure it's the best way, so if someone knows a better way please let me know. In Thunderbird, click Tools, click on account settings, click Open PGP security , then uncheck the " encrypt messages by default" clear sign messages by default and then restart Thunderbird. I don't know if it's the best and fastest way, but it does not send the message unencrypted until someone tells us an easier way. I think the key is that you do all of this through the tools of Thunderbird tab and there is no need to touch the settings in Enigmail or gpg4win. Thank you.
  Dave