Questions to fill two AIR-BR1310Gs

Similar Questions

• Configuration of WiFI AIR-BR1310G-A-K9-R encryption

  Aironet model: AIR-BR1310G-A-K9-R IOS: Cisco IOS Software C1310 (C1310-K9W7-M), JA Version 12.4 (10B), VERSION of the SOFTWARE (fc2)

  Hello:

  I inherited a WLAN with three AIR-BR1310G-A-K9-R routersconfigured APs as well as two other access points

  of a different mfg in the same WI - FI HotSpot.  Three Cisco access points have been defined for the WEP encryption

  While other than Cisco both were installed for WPA2-Personal.  There seems to be no particular reason for the WEP-

  differences in encryption WPA2-vs other that this is the default for both, apparently.

  My question is, what encryption types supports the Aironet 1300 series, it is only WEP?   I have

  would like to have more options than WEP just for the BR1310s, is - it possible?   When I log in the

  HTML of the Cisco router page and look at encryption it shows only WEP in option.  I was told that there are no later

  version of the IOS, IOS of AP autonomous software - 12.4.25d - JA2, offer WPA or above encryption?

  Thanks in advance for your time and your consideration.

  Doug

  With 12.4.25d - JA2 IOS, you can configure WPA2/AES on 1310 as well. I had a PA model 1310 & I set & checked.

  Here's the basic involved config. (I simply configured DHCP on AP it yourself & you can change it in your case)

  1310-1 #sh worm

  Cisco IOS software, software C1310 (C1310-K9W7-M), Version 12.4 (25 d) JA, RELEASE SOFTWARE (fc1)

  DHCP excluded-address IP 192.168.178.1 192.168.178.50

  IP TEST dhcp pool

  network 192.168.178.0 255.255.255.0

  router by default - 192.168.178.1

  !

  SSID dot11 TEST

  open authentication

  authentication-key wpa version2 management

  Comments-mode

  WPA - psk ascii Cisco123

  !

  interface Dot11Radio0

  encryption ciphers aes - ccm mode

  SSID TEST

  !

  interface BVI1

  192.168.178.1 IP address 255.255.255.0

  % DOT11-6-ASSOC: Interface Dot11Radio0, Station 04f7.e4ea.5b66 associated KEY_MGMT [Wpa2 PSK]

  Here's the configuration for this version of IOS guide

  http://www.Cisco.com/en/us/customer/docs/wireless/access_point/12.4.25D.ja/configuration/guide/cg_12_4_25d_JA.html

  HTH

  Rasika

  Pls note all useful responses *.

• Cisco suggested cable does not? (Cisco Air-Br1310g-a-k9-R and Ant24120)

  Hello

  I bought 3 Cisco Aironet 1310 Outdoor Access Point/bridge - wireless access point (AIR-BR1310G-A-K9-R ) and 3 Cisco Aironet 2.4 GHz 12 dBi Omni Mast Mount antenna w/RP-TNC connector (AIR-ANT24120) .
  But the antenna cable is very short (1 ft.). so I need a cable extra. I read the newspapers and they said AIR-CAB020LL-R is suggested by cable for ant24120. But when I look at the pictures of this cable I saw this cable has two side RP - TNC female.
  
  
  The access point has the male Ant. side and the next female ANT24120. So, how can I connect this side 2 (MF) with a wire from the female side 2 (FF)? I'm so confused.
  Please can you suggest me a cable to connect this access point to this antenna.
  Thank you very much.

  Hi Bulent,

  This cable has 1 female and 1 male connector

  Intake AIR-CAB020LL-R of interconnection cable low loss of 20 feet, a RP - TNC,.
  one outlet RP - TNC

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps7183/ps469/product_data_sheet09186a008008883b.PDF

  AIR-CAB020LL-R / AIR-CAB050LL-R

  Here are the cables RMT 400 Style with TNC reverse polarity of the connectors at one end and TNC female connector reverse polarity on the other end.

  http://www.coaxplanet.com/CrossReferences/CiscoCrossReference/AIRCAB020LLRAIRCAB050LLR/tabid/265/default.aspx

  See you soon!

  Rob

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• is it possible to fill two paths opened by the pen tool and the two paths open close the other?

  is it possible to fill two paths opened by the pen tool and the two paths open close the other?

  You should find the forum for any product it is and post your questions there.

  Here is a link to a page that provides links to all of the Adobe forums...

  The Forum links page: https://forums.adobe.com/welcome

• Hello I have PC and pay monthly. We are a small company. Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: the

  Hello

  I have PC and pay monthly. We are a small company.

  Question 1: For two years I have a full subscription to Adobe all programs. But the other day I would open an another user InDesign documents and could not open this with the error message: "the document is done a new version than my version of InDesign. How should I do to upgrade my version to a version more recent?

  Question 2: I already have a license to use the software on two computers. Am I not allowed to use the same version I've taken down on adobe.com til two computers or terms here.

  Sincerely

  Stefan Svensson

  Hello

  Please see update requests in your desktop CC application.

  CC Adobe license can be activated on 2 machines using the same Adobe ID, but only one at a time.

  Reference: licenses and terms of use | Adobe

  Kind regards

  Sheena

• How to share resources between two Air Android Applications

  I have two air apps on Android 2.2. What I want to do is to load App2.swf into a movieclip in App1.swf.

  Is this possible?

  If I include App2.swf in the APK everything works fine. But I want to do is make him load a second file application or /sdcard/dropbox/App2.swf

  My load order var mRequest:URLRequest = new URLRequest ("file://sdcard/dropbox/App2.swf"); But it does not work!

  Try to load a file of text instead of a swf file and see if it works? Which will tell you if you have the right path or not.

  The swf file may not work because of security concerns. Attach handlers mistakes and see what they say - you get a security error or a file not found error?

  I have never tried loading out of the SD card, but some useful to use tracks are here:

  http://help.Adobe.com/en_US/AS3/dev/WS5b3ccc516d4fbf351e63e3d118666ade46-7fe4.html#WS5b3cc c516d4fbf351e63e3d118676a4c56 - 7fc 6

  Nick

• Using variables to get the answers to the questions of fill-in-the-White

  Hello

  Fill-in-the-blank questions, to provide answers. I want to provide these in the form of variables (user-created), rather than in the form of fixed strings (so, as $$ var1$ $ and not as 'Rabbit'). I could not get this to work. The variable input function is available (in the properties panel), but it does not in fact (i.e. even if you select a variable to be entered, it is not actually automatically registered).

  Is there a way around the problem?

  1. NB containing the same question for text entry boxes (rather than fill-in-the-blank questions). If I could get this works for text entry boxes, I'd use questions these rather than fill-in-the-white.

  2. a peut use variables for the answers to the multiple-choice questions. So I hope I can make it work for fill-in-the-blank questions as well.

  Thank you in advance. Marvin DuBois

  That would be my suggestion. I don't have a blog, but using BER of for this kind of questions me as well. And unlike the widget/interaction, that I've mentioned before, BER is an interactive object, which means it can be validated and that there may be a score attached to it. But, it will not help you, since you have to add the correct answers in the same way as for a drop-down list in the issue of the FIB (they are the sorts of TEB). And it is this list that does not enter a variable rather than a fixed sequence of characters.

  This means that you are into stocks advanced, identical to that of my blog posts with the widget/interaction.

  Have a work around (after all I'm the work around Queen) having intercourse, if you don't check that BER, described here:

  http://blog.lilybiri.com/report-custom-questions-part-2

  The idea is to use another interactive object that can have a score. Actually, I use two instances of the same object: a score of 0 and one with score of X and show the right according to the conditional action.

  However if you want to have multiple TEB on the same blade, which must be verified with the same tip action, you will need either the mastery of InfoSemantics (only for output SWF) widget or Javascript.

  Lilybiri

• How to fill two text fields based on a simple drop down list

  I'm trying to set up a form so that the two text fields will fill with a text by default (separate for each text field) at the same time.

  Here is a screenshot of the fields.

  Thus, for example, if I select Utah in the drop-down list in 'State', ' OH Fund Center "is automatically filled in with APWSWR4949 and"OH WBS"is automatically filled in with WR49.73.0003.

  

  I have a similar script for down text in form fields, but the script does not work.  I tried the following script:

  var v1 = this.getField("RecState").valueAsString;

  If (v1 == "Utah") event.value = APWSWR4949;

  else event.value = "";

  However, it would not AutoFill OH Fund Center area.  And I have no idea how complete both fields at the same time.

  Any help would be greatly appreciated.

  Thank you!

  Crystal

  Strings must be enclosed in quotation marks. So change your code:

  var v1 = this.getField("RecState").valueAsString;
  if (v1=="Utah") event.value = "APWSWR4949";
  else event.value = "";
  

  If it works, then you can use code similar to your other field.

• FrameMaker 11 - question automatically fill leader Info

  Hi all

  We have a problem with the file Info... fields in FrameMaker 11 being automatically filled by the unwanted text, even after we removed it.

  Subject fields and key words contain the text we want to remove all the files in a book.  We open each file and delete the text, save the files, and then close the book.  When we reopen the book, all the files have the unwanted text of back once again in the subject and keywords fields.

  Ideally, we would like to completely remove the text unwanted from the files (a reference to the number of the piece of a piece of equipment).  However, we cannot find where text is stored.  It does not appear in the list of Variables, but must have been manually added by a previous writer because it is a specific company reference number.

  Anyone know where the text is stored?  How to remove the text from the File Info fields without it returning?

  Thanks for the help!

  Emma

  It is a bug.

  The information is stored in two locations in the MIF:

  • End # PDFDocInfo
  • at the end # of DocFileInfo.

  To remove a value, you must remove it from these two places to the MIFID. I suggest that you remove the entire DocFileInfo. Then change the PDFDocInfo so that it contains only the values that you want to keep.

  Please also report this as a bug to https://bugbase.adobe.com/index.cfm .

  FYI, the DocFileInfo is XML encoded in hexadecimal. After decoding, it looks like this:

  http://www.w3.org/1999/02/22-rdf-syntax-ns#">

  "xmlns ="http://purl.org/dc/elements/1.1/"

  "xmlns:XMP ="http://ns.adobe.com/xap/1.0/"

  xmlns:PDF ="http://ns.adobe.com/pdf/1.3/" >. "

  application/framemaker

  DELETE THIS

  FrameMaker 10.0

  0116 03-12 T 10: 24:38 + 01:00

  0116 03-12 T 10: 26:01 + 01:00

  0116 03-12 T 10: 26:01 + 01:00

  FrameMaker 10.0

  DELETE THIS

  I think that while you're editing the document, FrameMaker using only one of these structures (PDFDocInfo/DocFileInfo). But when you save the document, it is then their merger, copies data from the unused structure if the other structure is empty.

• Simple javascript for the drop-down list IF, fills two different fields

  I don't write js, but can grasp what it did when I hang a sample edit and re - purpose. I have a form simple fax that already resets to the opening. Here's what I'm doing:

  User selects the sender's name in the drop-down list of about 15 (grow w / hour)

  Fill in the following text field "sender Fax #" with the number of direct fax (xxx-xxx-xxxx in the js) user

  Are also complete this later text field "sender Ph #" with the number of direct ph of the user (xxx-xxx-xxxx in the js)

  Here is an example which I believe works the way you want: https://workspaces.acrobat.com/?d=gZNDS8dQQNqvwocUufXHNQ

  You have to watch the fields to see how they are implemented and to study different scripts to see how it works. If you have any questions, post again.

• Several questions of fill-in-the-white on a slide

  Hello

  First of all, please note that I am a novice user of Captivate and I use version 5.5.

  For now, I managed to create slides simple fill-in-the-blank quiz, each of which contains a single issue. I also managed to add text "marked vacuum" in each fill-in-the-blank box (right click > white label). I would now like to add a few fill-in-the-blank questions (in fact, it would be just a few drop-down lists) in a slide, to where I want it on the slide.

  Is it possible and how can I do?

  Thank you

  Concerning

  Embarrassed, but when you mark a question as correct, the thread will be marked as answer. Prior to this release, there is a way to mark as answered without scoring an answer as being correct. You can assign several relatively useful answers, but that will not mark the thread as an answer. I'm not a moderator, do not know if these people have more power in their Toolbox.

• Another question border.fill.color.value

  I'm trying to script an if statement to set the background value according to the instanceIndex of a subform.  I tried it in the click event of the addButton and the subform indexChange event.  I saw an example of exactly what I'm trying to do, but for the life of me I can't find it now.  I searched this forum both the users of the forum and I know that it was in one of them.  In any case, here's what the script looks like:

  -form1. Main_Subform.AdditionalAssaysSubform::indexChange :-(JavaScript, both).

  If

  (form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '0') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = '240,240,240 ';

  }

  on the other

  If(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '2') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = '240,240,240 ';

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '4') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = '240,240,240 ';

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '6') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = '240,240,240 ';

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '8') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = '240,240,240 ';

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = '240,240,240 ';

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '1') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = "255,255,255";

  }

  on the other

  If(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '3') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = "255,255,255";

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '5') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = "255,255,255";

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '7') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = "255,255,255";

  }

  on the other

  if(form1. Main_Subform.AdditionalAssaysSubform.instanceIndex == '9') { }

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDropdown.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssaysDataTable.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayAvgNeg.border.fill.color.value

  = "255,255,255";

  Form1. Main_Subform.AdditionalAssaysSubform.AddedAssayDisplacement.border.fill.color.value

  = "255,255,255";

  }

  I also tried to use the or (|) and combine the fi.  My question is... I use the correct event; I place the conditional statement in the appropriate place; or I again in left field?  Any suggestions would be much appreciated.  Thanks in advance. -rpeterson

  Hi Renee,.

  Here is an example highlighting the background color of the field nested inside a repeating subform based on the index of the repeating subform. The background color will not change enter/exit the fields but will create a color pattern similar to shadow line of the tables.

  This JavaScript script lives in the repeating subform AdditionalAssaysSubform indexChange event.

  nIndex var = this.instanceIndex;
  nColor var;

  If (nIndex % 2 == 0)
  nColor = "240,240,240";
  on the other
  nColor = "255,255,255";

  Use the following if you want to change the background color of the object
  AddedAssaysDropdown.border.fill.color.value = nColor;
  AddedAssaysDataTable.border.fill.color.value = nColor;
  AddedAssayAvgNeg.border.fill.color.value = nColor;
  AddedAssayDisplacement.border.fill.color.value = nColor;

  Or background color of the following if you want to change the widget
  AddedAssaysDropdown.ui.oneOfChild.border.fill.color.value = nColor;
  AddedAssaysDataTable.ui.oneOfChild.border.fill.color.value = nColor;
  AddedAssayAvgNeg.ui.oneOfChild.border.fill.color.value = nColor;
  AddedAssayDisplacement.ui.oneOfChild.border.fill.color.value = nColor;

  See you soon

  Helen

• Fill two empty columns with the values in a column (all in the same table)

  Can someone point me in the right direction? I want to fill the column prefix and suffix with the AcctNum data.
  
  "Prefix is the part of the number before the '-' and the suffix is everything after the '-'. '. Write a SQL command to fill the column prefix and suffix.
  

  *Accounts* 
  
  AcctNum   Prefix   Suffix
  -------   ------   -------
  123-0097
  X089-056
  123-0097
  123-0098
  F3377-D
  X089-057
  X089-058
  3-009712

  It is supposed to look like this:

  *Accounts* 
  
  AcctNum   Prefix   Suffix
  -------   ------   -------
  123-0097    123     0097
  X089-056
  123-0097
  123-0098
  F3377-D
  X089-057
  X089-058
  3-009712

  That's what I came with, but it does not work because it is basically putting multiple values into a single cell:

  update accounts
       set prefix=(select substr(acctnum, 1, instr(acctnum,'-')-1) from accounts),
       suffix=(select substr(acctnum, instr(acctnum, '-')+1) from accounts)
       where acctnum=(select prefix||'-'||suffix from accounts);

  I want this query is incredibly easy and I have forget something. Any help is greatly appreciated.
  
  Published by: 885913 on September 18, 2011 12:53

  UPDATE accounts a
  SET    ( prefix, suffix ) = (SELECT Substr(acctnum, 1, Instr(acctnum, '-') - 1),
                                      Substr(acctnum, Instr(acctnum, '-') + 1)
                               FROM   accounts b
                               WHERE  a.acctnum = b.acctnum);
  

• Question - calculation for two numbers of entries by the user

  I have a form where the user is required to enter two values (A and B) in order to perform a calculation.  It is, the calculation is A / B, so when they enter value, a time-out message immediately pop error on the form (because he's trying to divide by zero).

  What is the script so that the error message does not appear, then the user can enter A and B values without overflow error that appear immediately to A value entry?

  Hello

  You can wrap your script in an if expression.

  if (valueA ne 0 and valueB ne 0) then
       valueA / valueB
  endif