Configuration of WRH54G in the India to accept the user name and password to go online
I have router WRH54G and my ISP requires me to give the username and password to go online. How do I alter my router to enable this?
Thanks in advance for the help
Ravi
First of all, who is your ISP?
If your ISP is a DSL provider and they already have setup their Modem in Bridge Mode. And for you to go online through your router, you must configure the PPPoE settings on your router, so your router will do all of the authentication process.
Connect the Modem to the Internet Port (WAN Port) Linksys router, then connect your computer to the Linksys router on the n ° 1 of the LAN Port... On your computer, click on start - RUN - CMD and click ok... Now in the hit and "ipconfig" command prompt window type enter and note the IP address of the default gateway...
Now on your computer, open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - the default gateway IP and press ENTER... Let the empty user name & password use admin lowercase...
Once you log in to the router configuration page, under the configuration under "Type of Internet connection" tab change to 'PPPoE' and below enter the username and password provided to you by your ISP and below check the box 'Keep Alive' and click on save settings...
Now you have to click on the 'Status' tab and check if you get an IP address any under "Internet IP". If yes then close your browser and re - open your IE and check if you are able to go online.
Tags: Linksys Routers
Similar Questions
-
How to hide the user name and password to order online using maxl
Hello
How to encript my user name and password to order online invites when I'm connecting to the Essbase server by using the batch file:
* 1_Here is my batch file:*
The file name is AV_Assig_Var1.bat
/*******************************/
REM This batch file sets the following variables:
Set $1 = 'admin ';
Set $2 = "password";
essmsh AV_Asig1.mxl admin password
/*******************************/
===========================
* 2_Here is my maxl file:*
The file name is AV_Asig1.mxl
/*******************************/
/ * Create a log of process * /.
spool to 'D:\lova\spool_log.txt ';
/ * connection (using a batch file variables * /)
connection $1 2 on 10.42.100.229;
/ * create application and database * /.
create application AV_Asig1;
create database AV_Asig1.AV_DB;
/ * Log of the process end * /.
spool off;
"exit";
/*******************************/
* Prompt 3_Command *.
D:\Ess > AV_Assig_Var1.bat
D:\Ess > rem This batch file sets the following variables:
D:\Ess > rem 1: user name
D:\Ess > rem 2: password
D:\Ess > essmsh AV_Asig1.mxl admin password
Essbase MaxL Shell - version 9.3.1 (ESB9.3.1.0.0A181)
Copyright (c) 2000, 2007, Oracle and/or its affiliates.
All rights reserved.
MAXL > login admin password on * 10.46.100.222 *; / * I want to hide this information * /.
OK/INFO - 1051034 - user [admin] connection.
Last connection OK/INFO - 1051035 - Monday, June 14, 2010 12:44:03.
OK/INFO - 1241001 - connected to Essbase.
MAXL > create application AV_Asig1;
OK/INFO - 1051061 - AV_Asig1 of the loaded Application - established connection.
OK/INFO - 1054027 - [AV_Asig1] Application startup with the process id [6792].
OK/INFO - 1056010 - AV_Asig1 of the Application is created.
MAXL > create database AV_Asig1.AV_DB;
OK/INFO - 1054014 - AV_DB of the loaded database.
OK/INFO - 1056020 - AV_Asig1.AV_DB of the database created.
MaxL Shell completed
D:\Ess >
I look forward to input from anyone.
Thank you and best regards,
Dembele.Beyond this thread, I gave a presentation to the MaxL Kaleidoscope that goes in a little depth re encryption and a bunch of other goodies MaxL last year.
To download, go to www.odtug.com, click on Tech, Hyperion/Essbase resources and use the search box for MaxL.
There are two presentations by Tracy McMullen and the other by me. Tracy is a good introduction to the various groups of order; my presentation focused on a few areas of depth and one of them being the encryption. The title is "Master Essbase with MaxL Automation".
You will need to join WORLD to download the presentation, but there is a junior membership, which is free.
Kind regards
Cameron Lackpour
PS WORLD Kaleidoscope 2010 is coming in two weeks, starting on June 27, 2010 - for those of you still on the fence, this is a great conference, and I invite you all to come. The content of this year will be fantastic.
-
I have been using Thunderbird for a long time. One day he told me that my password is incorrect. After several attempts, the correct password decided to remove the e-mail account and start to charge. Now, when I put the account it says "configuration could not be verified - is the user name and password? None of them are wrong. I tried to change the password, contact my email provider and everything works fine except when trying to use Thunderbird. The email that I had tried to set up is at work. Any help in fixing this will really appreciate it.
The best suggestion is to get the correct settings from your provider. They move to the top of their servers. They know the settings that work.
-
When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:
The server process could not be started because the configured identity is incorrect. Check the user name and password.
Please give me your entries for this problem.
Kind regards
Shankar Kale
Hi Shankar,The question you posted would be better suited in the TechNet Forums. See the link.Hope this information helps. -
How can I change the user name and password
I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.
However I don't know how to change the user name and password.
I would also like to know how it works?
We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.
If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)
The default user name and password so that the robot is root/vmware"."
-
Options > Security > saved passwords, can I print on the site, the user name and passwords saved on my computer, or how to locate the file where this information is kept. I change computers and want to transfer the information to the new laptop. Thank you.
See
- Print a list of passwords, must be run from a local drive by the directions), the - edmeister.com
-
Difficulties of username and password.
In Windows Mail I suddenly wonder for the user name and password. I fill them but receive no mail from mu. I get the message:Account: 'pophost1.classicfm.net', server: 'pophost1.classicfm.net', Protocol: POP3, server response: '-ERR failed the connection. ', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92.Please can you help me?Hello
· Were there any changes to the computer, lately?
Method 1:
(a) start the Windows Messaging mail client.
(b) click on 'Tools' from the main menu and choose "accounts".
(c) a pop up will appear showing you all the email accounts in Windows Mail. Select the one that gives you the error and then click on the button 'Properties'.
(d) another window pop up displays all parameters associated with this account.
(e) under the "servers" tab check the 'e-mail username' and 'password'. One of them would certainly incorrect which translates the ID of Windows Mail error 0x800CCC92
(f) to avoid having to enter the user name and password each time, check the box in front of "Remember password".
(g) once you make the appropriate changes, click on the button 'apply' then 'OK'. Close the other pop-up window
Method 2: Remove the existing from Windows mail email account and create a new one following the link provided below.
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account
Reference:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail
-
Original title: "Windows Security".
I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today. I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP. I can't front/send by email but receive in Windows mail.
Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',
So wait a while and try again later. You can also go to their website and log on there to see if it works.
Also try to compact and repair the database (see www.oehelp.com/WMUtil/)
Steve
-
I use the recovery disks, restore the Visat OS on a dell laptop. After the OS system, it displays the screen that requires the user name and password. I can change the image associated with the user name, I can move the box around the screen, but it won't let me type in the username and password box. Without putting the usernane and the password it will not go further, and I can not restore. Help, please. Thank you.
Hello
This is the Information from Dell to reinstall using disks:
For any problem using it, contact Dell:
http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_technical_support
Or post in the Support Forums:
http://en.community.Dell.com/support-forums/default.aspx
See you soon.
-
Whenever I open my email account, I asks me to enter the user name and password and I see an 0x8000CC17 error message. Please can you offer any advice. Thank you
* original title - Hello, I am a user of Windows Vista and my email account is windows mail *.
Hi Petersanswers,
Thanks for posting your question in the Microsoft answers Forum. For information about Windows Live Mail, please visit the following link:
http://windowslivehelp.com/forums.aspx?ProductID=15
Thank you!
-
Not receive a computer given to nine, but don't know the user name and password
I got a refurbished computer and I don't know the user name and password. Someone knows what to do?
* original title - I received a refurbished computer and I don't know the user name and password. Someone knows what to do? *
Hello
Reinstall vista
I'm sorry, but the strategy of microsoft in these forums is that without assistance will be given about lost or forgotten passwords
read the policy at the link below
Here are the different ways to reinstall vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
Save all data, because it will be lost, do the above
How to replace Microsoft software or hardware, order service packs and replace product manuals
-
Hello
I added the user name to log on to the computer in the active directory after adding, I can't connect to the internal application by using the user name and password...
Please give the solution
What happens when you try to connect?
If you are able to connect using the different account, try running gpupdate/force.
If the problem persists, you can open the discussion on:
http://social.technet.Microsoft.com/forums/Windows/en-us/home
What is responsible technical issues forum.
-
deleted user account and the screen is the user name and password
Hello
Thank you very much for the help in advance.
My personal PC at home never used me to ask for a password when I start it up, I can't put in when I took it out of the box, if I did, then I forgot. now, I went and I deleted the user account (admin) on W7 (the only one I had)... went to RUN > typed in "control userpasswords2" > highlighted account > remove... the PC did not ask if I want to keep the files or not, he just asked me to reboot now or later. I rebooted.
THE PROBLEM IS: after I restarted the PC, it now wants to put me the user name and password, I do not know if she wants my old username and password or what? (Forgot my password)
Will be commissioning a PC on the mode using safe without a boot disk (not yet tried) and what happens if the hidden admin account is what I deleted, then where?
Please help because I tried to put my old username that I used until I deleted the account... what username and password he wants and what can I do to use my PC again.
What is your computer brand and model? If not a branded computer, what is your motherboard brand and model?
When you start in safe mode, how many accounts user do you have? If more than one, you can create a new user account?
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7Difficulty of a corrupted user profile
http://Windows.Microsoft.com/en-GB/Windows-Vista/fix-a-corrupted-user-profile
-
[MAF] How to get the user name and password after login?
Hi Experts,
I have a call to REST where it requires identification information of the user (uname and password) to identify the data that belongs to who.
Authentication has been made with OAuth.
I believe that there is an API to get the user name and password in the CRG
See you soon,.
Hendry
Hello.
You don't need to manipulate the credentials yourself in code. MAF will propagate the logon cookie or inject the identification information in the HTTP header if cookies are not supported.
To do this, you must select the purchase option of cookie from the server connection Include in REST in the dialog box create a connection Login MAF , such as discussed here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-securing.htm#ADFMF23732
In addition, you must attach the policy of security appropriate to the connection, as explained here:
http://docs.Oracle.com/middleware/maf210/mobile/develop/MAF-Web-services.htm#ADFMF23697
Best regards
Frédéric Desbiens
Senior Product Manager
Mobility and Cloud oracle
Twitter: @BlueberryCoder
-
I have Dreamweaver CS6 and want to know if I can edit an existing Web site built in front of Page if I have the user name and password, and how do I go about this?
Hello
You must define a site in Dreamweaver and need to set up your FTP server. One for that, you can connect with the FTP server where your FrontPage is loaded and you can get the copy of the said locally.
Link below explains how.
Define a Site in DW
Define a site in Dreamweaver. Adobe Dreamweaver CC tutorials
https://www.YouTube.com/watch?v=sHAvSbdRgu8
Connection to the FTP server
https://helpx.Adobe.com/Dreamweaver/using/connect-remote-server.html
Using Dreamweaver | Edit an existing remote Web site
Concerning
Vivek
Maybe you are looking for
-
Re: Satellite A500-1f4 eco utility, intel RST, utility of the flash card does not
Hellomy name is Ashraf Shahin I own a Satellite A500 - 1f4.yesterday I installed the new BIOS update to 1.50 on the site of toshiba, and after that my eco utility, displaying flash cards, intel RST service are not running.please help me Concerning
-
Bluetoothis is not ready - Qosmio F750
Hi all I only notice this problem recently with my Toshiba Qosmio laptop, in the past I was able to connect to my bluetooth very well (I use it to connect the controllers like a Wii remote). I left it for about a month or two without using it and the
-
Control bug on Exchange Server 2013 error: Microsoft-Windows-WER-SystemErrorReporting
Log name: System Source: Microsoft-Windows-WER-SystemErrorReporting Date: 01/03/2015-21:27 Event ID: 1001 Task category: no Level: error Keywords: Classic User: n/a Computer: exch13 - 02.domain.com Description: The computer was restarted after a bugc
-
Is dotnet 2003 always supported
-
I try to write the script with the menu option, but I can't jump using '2' in step 2 (jump in Output 1 using '1' is successful). Where is my fault?