Configuration to use windows mail for mobile and iphone without having to sign in with the user name and password each time?

Similar Questions

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve

• My Microsoft Store does not load on a 23 HP Envy all-in-one. It is said that the user name or password has been used too many times. How can I reset this?

  great, I try to load an app on the store, the message tells me that this can be done. I checked my account on my I Pad and it works.

  When I reset my account, I get a message that I tried the user name or password too often.

  any suggestions how to fix this?

  Hi Monte Schwartz,

  Thanks for posting your query on the Microsoft community.

  Before give you the steps of troubleshooting on this, I would like to know some details about your problem.

  1. Is the issue with the app store or with any other app too?
  2. Are you a specific error code?

  But you can always try some basic troubleshooting steps:

   

  Method 1: Check the updates

  Check if windows is up to date. If there are pending updates then please go ahead and install the updates and try to load the applications through the store.

  You can use the link for additional help to install pending updates below:

  https://support.Microsoft.com/kb/2777982?WA=wsignin1.0

  Note: Also check the date, time and time zone of the system.

  Method 2: Reset Windows Store cache

  1. press Windows + R key.

  2 type wsreset.exe. Press ENTER.

  Method 3: Re-register Windows Store

  I suggest you to re-register Windows App Store and check. Please follow the steps:

  a. press the Windows key + X.

  b. click prompt (run as administrator).

  c. the administrator: command prompt window, type the following commands.

  PowerShell - ExecutionPolicy Unrestricted Add-AppxPackage - registry DisableDevelopmentMode-$Env:SystemRoot\WinStore\AppxManifest.XML

  Reference: http://blogs.msdn.com/b/notime/archive/2013/10/18/fix-store-app-in-windows-8-1.aspx

   

   

  Note: Back up the registry before you edit it. Then you can restore the registry if a problem occurs.

   

  Method 4: Run the troubleshooter of App.

  The Apps store is an automated tool that we have developed to deal with a number of known issues that may prevent applications from running correctly. This troubleshooting automatically solves some issues including the suboptimal screen resolution, incorrect security or account etc. settings. You can click this link to download and run the utility of troubleshooting Apps.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  You can try the above steps and get back to us if you need help regarding the same.

  Thank you.

• Why my email sign in with a user name and password is all of a sudden?

  Original title:

  E-mail

  Why my email sign in with a user name and password is all of a sudden?  When I don't put my username and password in the spaces, he says it is a mistake and I do it again and again, and it never works.  I can't send or receive e-mail on my Microsoft e-mail account.  I haven't changed anything lately, so I don't know why this is happening.  I can get my email on my COX webmail is a Microsoft problem, is not a COX problem.  Help!?

  As the account of emissions contain private information that can be shared in a public forum, please use the online form below. They are the only ones who have access to your account information, we simply don't have.

  
  

  
  

  Account of all the partners must now wonder online by using the Microsoft online form

  
  Select the error you must help with and fill in the information requested on the next page.  You must be connected to a Microsoft account to access the form.

  If you are unable to access your main account, you can use another account (if you have one) or create a new one https://signup.live.com/
  

• How can I add a form with the user name and password

  I would like to add a registration form with the user name and password. Are there any embedded html or widget for this

  Hello

  Here you will find a similar description:

  https://forums.Adobe.com/message/6078030

  https://forums.Adobe.com/message/6141887

  Thank you

  Sanjit

• Need to set up Windows mail for incoming and outgoing mail server

  I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)

  I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)

  Hey Kim Clement

  Contact your ISP (internet service provider).

  They offer your broad band/dial-up connection.

  Ask them to:

  username
  password for your access broadband account / distance with them
  Server of incoming POP3 mail
  outgoing e-mail server

  and read this on how to set up windows mail on the microsoft below link

  Windows Mail: Setting up an account of end-to-end

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  Walter, the time zone traveller

• Problem with Windows Mail invalid username and password.

  new issue - I had WM set up on this computer for a year without this problem. When checking my emails, a Windows Security popup stands up and asks me to sign in and enter my password. I do that, then I get this error message-

  Account: 'pop.charter.net', server: 'pop.charter.net', Protocol: POP3, server response: '-ERR user name or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  and then the popup asks again and so on...

  I checked my mail account settings, even deleted and added this email account. Always the same.

  If I connect to the Charter.net and sign there, I get my messages - but can't always get through Windows Mail.

  Thanks for any help

  Janice

  These settings are correct in your configuration?

  incoming mail server name: pop.charter.net.
  outgoing mail server name: smtp.charter.net.

  You should probably not have a tick in the box "connect using password authentication (SPA) secure.

  Configure Outlook Express/3 rd Party E-mail
  http://www.Charter.com/customers/support.aspx?SupportArticleID=1661

  Take a look in the right pane of the Web Page related to the Support provided by your ISP options.  Sometimes they change the Ports for mail servers and that you may have missed notification.  In all cases the ISP is your best first step for help.

• There is a problem with Firefox 'remembering' my Verizon residential account password. Using Firefox, I have to enter my username and password each time.

  There is a problem with Firefox 'remembering' my Verizon residential account password. Using Firefox, I am obliged to enter my ID and password every time I closed my browser and then restart or close my e-mail for a while, even though I checked the option "keep me connected" significant given by Verizon. I spent a lot of time today working with the technical support of Verizon and they (and I) can verify that it's specific to Firefox and IE is not the case. So far, this seems to be limited to the connection from Verizon, but there may be other affected accounts protected online. If it helps, I run Firefox under Windows 7 with Norton Security and the active Norton toolbar. It is a real pain and needs to be repaired.

  With the modules form filling;

  Go to the web site. After you enter data in a form, tell you the
  fill in form to remember what has been entered, save him form fill
  information based on the address of the site and the name of the
  field of that information was concluded. If the same field shows
  upward on a different page for the same site, or when you return to
  This page, the stored information is entered automatically
  For you. So far, I have not found a web page that prevents them from working.

• Urgent: Cannot log on to Windows 8! "" Your PC is offline. " Please sign in with the last password used on this PC"

  I use W8 for months and all of a sudden, while traveling, I can't connect to my computer. I get the error "your PC is offline.". Please sign in with the last password used on this computer. "I am sure that I use the password. I have a flash drive and another laptop (Running OS X) at my disposal. What should I do to access my laptop?

  I don't have access to my local network, or any network besides.

  I have not recently changed password. I can't restore or refresh because it requires the password and says that isn't true. I never installed webroot or anything of that kind.

  Results in the same number safe mode.

  I can't connect to my Live account with my phone just fine.

  I do not have a local account.

  It's ridiculous and absurd oblivion by Microsoft. I'll be away a network known for a week and have literally no access to my computer. I would like to take this opportunity to warn all users of Windows 8 to make sure that they USE LOCAL ACCOUNTS. DO NOT USE DIRECT REPRESENTS WINDOWS 8, BECAUSE IF THIS HAPPENS TO YOU AND YOU CANNOT CONNECT TO A WELL-KNOWN. NETWORK, YOU WILL BE LOCKED.

  I am aware that there are discussions on this topic, but I want to throw oil on the fire, so to speak, because as far as I know, there is no solution.

  * EDIT *.
  The only solution is to connect to a known network. If you are not able to connect to a known network, you can not connect, simple as that. It's a big bug for sure. I repeat, change your account to a local account to avoid this problem.

  So I solved this problem, but unfortunately, it was as bad as I thought. As I thought, you need to connect to a network "Known", and then try to connect. It should work. If you are not near a network known (as if I was), as far as I know, there is no solution. To avoid this, change your account to a "Local" account

  My theory for the problem is the following:
  When you connect using a Live account, the password is saved locally and on the network. If you are connected to a network, it verifies the password that you enter the password stored on the network. If they match, it will allow one, sign in. If you are disconnected from the network, Windows attempts to match the password online, realizes he cannot, then checks the local password. Somehow, in my case, the password locally must have been changed or deleted and so the password entered always was "Incorrect."
  So yes, big problem, I'm sure the solution is quite simple, but in the meantime, use a local account to prevent this. I was stranded, and it was a huge headache and cost me many hours of work.

• How can I disable the configuration that makes me type in name of user and password each time I send or reply to an email?

  Every time I have send an email, any email or answer to one, I have a symbol (maybe from the OS X keychain?) which is forces me to put in name of username/password before my email send. A lot of time and unnecessary.

  I just set up a verification of the signature in Adobe and think that it is the source, but it could be a bunch of OS X that has somehow been touched by the signatures of my safety. Can anyone help?

  Hi janteve,

  If you have the option to remember the password please check it after you have entered the user name & password.

  Otherwise, I will recommend you to contact Mac support team to get this problem resolved as they specialize on the devices out there.

  Kind regards
  Nicos

• I've used Windows Mail for years without a password and login. Now he asks for them - what I wrote down doesn't seem right! Help!

  My notes say so my ID is * address email is removed from the privacy * and password *.

  Also noted is: claudia of user and password windows installation * with a product code *.

  Under Windows.live, I have the ID * address email is removed from private life * with the password of * as indicated above

  Under what I wrote Uniquie ID 0030000A2CCP215.

  Send me an email to * address email is removed from the privacy * if you can not solve my problem on the above address.  Thank you.

  Hello

  For your safety, never send keys product, passwords or other personal information.

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  In addition, see:

  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  https://windowslivehelp.com/PasswordReset.aspx

• Local TV news sez DO NOT USE Windows Explorer for XP and Windows 7!

  Information TV local sez not to use Windows Explorer in Windows XP and Windows 7. Microsoft will provide you with a "Toolbox" as a temporary solution. There is problem that a 'hacker' can support my computer through Microsoft Windows Explorer. Is a CLEAR and PRESENT an IMMEDIATE DANGER?  Can I uninstall Windows Explorer? What should I install to take the place of the Windows Explorer?  How can I find the 'Toolbox' of Microsoft?  I use Microsoft Update at least twice a week to keep abreast of updates. I have McAfee Security installed.  Thanks for your comments, Kenneth Markson - * address email is removed from the privacy *

  Don't believe everything you read in the newspapers or see on TV.

  Then, you must distinguish 'Windows Explorer' (file management tool) and "Internet Explorer" (web browser).  You cannot uninstall Windows Explorer.  It is an integral part of Windows.

  You can't really delete Internet Explorer either, although in recent versions of Windows, you can remove a lot of it.

  You probably think of this story of a discovery recently 'zero-day exploit' in Internet Explorer: http://www.slate.com/blogs/future_tense/2012/09/18/internet_explorer_zero_day_vulnerability_ie8_ie9_hack_means_you_should_switch_browsers_.html
  You can read about so-called bypass Microsoft here: http://technet.microsoft.com/en-us/security/advisory/2757760 but they are so heavy that they are virtually worthless for the average user.

  If you are worried, I suggest the following:
  1. do not visit web sites that you don't know everything.
  2. make sure that your antivirus application is up-to-date.
  3. make sure that you have Microsoft Update set to automatically get updates (not just twice a week, although that normally, it's probably OK): http://support.microsoft.com/kb/306525
  4 and probably first of all, rather than Finally, download and install another browser, like Firefox or Google Chrome.  If you use one of these browsers instead of Internet Explorer, there is no need to actually remove Internet Explorer (and you still need to use it to get Microsoft Updates).

  Get Firefox here: http://www.mozilla.org/en-US/
  Download Chrome here: https://www.google.com/intl/en/chrome/browser/
  Get opera here: http://my.opera.com/community/opera/get
  Download Safari here (even if apparently Apple growing is more Safari for Windows): http://support.apple.com/kb/DL1531

• ADF Mobile access protected web service with the user name and password

  With Jdev 11.1.2.4 (with the extension of the ADF Mobile) I am creating a data control that uses a SOAP web service. The web service is not protected by a policy of wss, but its point of endpoint URL is only protected by simple HTTP authentication (internal weblogic server is not accessible public.) We use an Apache server that is configured with a location that is a simple proxypass on url of the web service endpoint weblogic. This apache location apply simple HTTP authorization). I can invoke successfully the methods with parser HTTP by simply adding to the request HTTP header "authorization: xxxxxxxxxxxxxxxxxx base =" (where xxx = user name and encrypted password).

  In the mobile application of ADF, I used the DataControls.dcx-> window to connect to the Web Service change and provided the username and password to the URL of the endpoint. The problem is that after the deployment and execution of this application on the emulator (or the device itself), I get no data by the web service since with the HTTP 401 error http server responses. It seems that that the credentials are not deployed to the device, so while the application is running can not find them.

  I searched a lot and found a similar article (quite old) in the RTO by Frank Nimphius here access_protected_web_services_from_adf.htm
  

  Is there a way to do this, or if I'm missing the entire image?

  Thank you very much.

  Christos

  Check out blog Shay https://blogs.oracle.com/shay/entry/accessing_secure_web_services_from

  or Andrejus http://andrejusb.blogspot.de/2012/11/adf-mobile-secured-web-service-access.html

  Timo

• The Windows 7 XP Mode requires XP Pro screen logon with the user name and password

  I was in safe mode and set a password as an administrator who does not help me to go beyond the Pro XP log-on screen who has need of password and user name.  This computer is Windows 7 Ultimate with XP Mode which has the habit of work. Now I can not access my recipe database which is in XP mode. If I have XP mode to uninstall and reinstall will I lose my recipes?  I have the path, but once again can not be accessed from the C drive (the path is C:\documents and settings\XPMuser\desktop\Laurie1.mk4).  Would a guest use to remove sign-in required? (I don't know the BACK).  Help?

  PROBLEM SOLVED.  I found that two files Microsoft Net had been added to the Virtual Machine (must be an automatic download because they do not show up before).  I deleted these (parked in the trash them).  Then, I entered XPMUser, then the password (lowercase).  Now, I was able to go beyond this security window and access my XP files.  I had tried in the past, but feel that these files Microsoft Net must have caused a few conflicts?  All my files recipe in this database XP program I was now able to copy them and then installed on my HP small laptop under XP.  No more frustration to this virtual machine.  Thank you for your replies Bill Sanderson.

• Windows network security authentication no field to enter the user name or password

  We experience this problem trying to authenticate to connect to a wireless connection. When we try to go around in the network properties to enter the credentials, we get the same thing.

  This is a new image and is up-to-date, the problem happens in some devices and the others with the same fine image work.

  any ideas of why does this happen and how to fix it?

  

  Hello

  Thanks for posting in the Microsoft Community.

  You did changes to the computer before the show?

  This problem may occur if the wireless network that has been implemented in all first was not set up correctly, I suggest you to remove the existing network and add a new home network, and then verify.

  Refer to the steps below:

  Step 1: Remove the existing wireless network
  1. Open network and sharing Center
  2. Select manage wireless networks on the left.
  3. Highlight the network, right click and select delete network.
  4. You can also use Merge or delete as required to remove unwanted networks.

  Step 2: Reconfigure the wireless network

  1. Log in the computer.
  2. Open connect to a network by clicking on the network (or) in the notification area icon.
  3. Choose the network wireless from the list that appears and then click on connect.
  4. Type the network security key or password if you are prompted to do so, and then click OK.
     You will see a confirmation message when you are connected to the network.
  5. To confirm that you have added to the computer, follow these steps:

  Open the network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.

  You should see icons the computer you added and for the other computers and devices that are part of the network.

  For reference: Add a device or computer to a network

  http://Windows.Microsoft.com/en-us/Windows/add-device-computer-to-network#1TC=Windows-7

  I also suggest that you ask your service provider to check the limit of the computer that can connect to the network.

  I hope this helps. Please let us know the results. Feel free to write us again for any help.