Configure SharePoint in Bi Publisher

Similar Questions

• How can I configure Flash CC to publish SWC compatible Flash Player 13?

  Hi all, I am using Flash CC to create some assets for a project AIR 13. I want to make sure the content I publish can be consumed by my AIR application. What should I do to publish Flash Player 13 CC Flash content? Creating guidelines for the new Flash Player 13 & AIR 13 release notes don't really say anything else that 'download the new playerglobal.swc '. Any additional help?

  FYI: I've got editing and configuration AIR 13. I just get Flash CC squared away.

  (1) No, it is precisely for the debugging browser if you do not need. If you look in the old versions of these files are located in the Flash Player folder. I guess that Flash carried out according to the needs (named InstallAX.exe and InstallPlugin.exe). You can omit this step if you wish. However, it does not hurt. If a new version of "no-debug' out you will be always asked to update Flash, so you won't miss anything.

  (2) correct, it's just a Flash Player. Once again since ancient times always said this file should be replaced with the latest version of the player. I assumed Flash used this Release\FlashPlayer.exe when maybe made you a projector and it needed to integrate Flash Player inside. I kept it in my workflow of update for years.

  The \Debug\FlashPlayerDebugger.exe is another story. This is the file that you need to replace to debug using the latest debugger. It is performed when you press CTRL + SHIFT + ENTER. So you want the file number 3 (oddly named projector content debugger (for Netscape compatible browsers)). The name confusedly deduced, it is a projector, but also for browsers, but it is the debugger. Rename this file FlashPlayerDebugger.exe and replace your FlashPlayerDebugger.exe existing in the folder Players\Debug\.

  Make sure that you restart Flash if it is running while you make all changes and try the debugger.

• Can I download BI Publisher on Oracle 11 g xe

  Hello
  
  I'm pretty new to BI Publisher, I tired to install several times, but have not been able to do...
  
  After I start RCU and when you check the overall requirements, I get this MSG...
  

  The database you are connecting is not a supported version. 
  Enter Database with version equal to or higher than 10.2.0.4.0 in 10g or version equal to or higher than 11.1.0.7.0 in 11g.
  Refer to the certification matrix for supported DB versions 

  I did not understand the error message, I already use Oracle 11 g R2 XE (on the Windows 7 machine...)
  
  However, if I ignore it and continue in the installation process, the configuration of the BI Publisher fails...
  
  What does 'certification matrix? Why I get this error message?
  
  Pls help, I'm stuck in the process of installation with more than 10 guys...
  
  Kind regards
  Fateh

  Certification matrix is a list of compatible products oracle with platforms and operating systems combinations
  and client software, all tested and supported by Oracle.
  If it is not in the list, it means oracle cannot guarantee that works in combination and therefore will not be supported for bug problems.

  The matrix certification for the BIEE11g can be found here:
  http://www.Oracle.com/technetwork/middleware/BI-Enterprise-Edition/bi-11gr1certmatrix-166168.xls

  But goes directly to your question:

  You install Oracle Fusion metadata on Oracle DB, so is the right place to look for minimum requirements at this location:
  http://docs.Oracle.com/HTML/E18558_01/fusion_requirements.htm

  In Section 7, "Certified databases", actually 7.1 you can read the message you get is when you use the remote control with Oracle DB 11.2.0.1 11.1.1.0
  and this is only a warning that is safe to ignore.
  In addition, this warning does not appear in the version of the RCU available in Oracle Fusion Middleware 11 g Release 1 (11.1.1.2.0).

  concerning

  Jorge
  p.s if this answers your question please grant points, and then close the message

• A router Asus, separate the 2 Web servers on 2 computers, how to set up?

  LabVIEW 2012, windows 7 Pro on computer A and windows 7 on the computer B.

  Computer A and B are connected to the router using the wifi.

  IP address of the computer A is 192.168.1.76

  IP address of computer B is 192.168.1.79

  Now, the router is configured so that it publishes the Web server on computer A, i.e. when I type, 128.200.xxx.xxx:80, he directed me to the Web of LabVIEW server on computer.

  Is it possible to have the Web of LabVIEW server on computer B come into play, using the same router?

  Thank you.

  -Chen

  --------edit-------------

  I forgot to mention that I tried to connect from Wan

  You simply run the second server on a different port.

• How to fix the user accounts in windows 8

  How to correct the user account in windows 8 on new g7 2246nr, I put to your laptop using the Microsoft account then switched to a local account.  I found myself with i admin working the rest of my files are broken up between 3 other user accounts.  I spoke with Microsoft to try to consolidate the accounts and they used a command line in the command, but he has not done. I always work with the system, but it has problems. I reloaded the software so for 3 times. All know how to correct the problem without reload all the software again?  also, after configuring sharepoint in Office Pro Plus, he created another administrator account.  I do not think this would happen?

  Hi BJ2124,

  Although I regret the inconvenience that you had with your experience of Microsoft Windows 8, you can better receive the technical expertise you need by contacting Microsoft about the issue of multiple account creation.

  You can call Microsoft Customer Service at 1-800-642-7676
  Mon - Fri: 05:00 - 21:00; Sat - Sun: 06:00-15:00 (PST)

  As a reference, I included the link to the technical support of Microsoft Windows 8 page:

  http://support.Microsoft.com/contactus/?ws=support

  Also, here is a reference link to change logins to Microsoft for local accounts:

  Microsoft how to switch from one account to a Local account in Windows 8

  And finally, here is a quick reference to solve the problem that you encounter while using an account download troubleshooting tool from Microsoft:

  The problems of account Microsoft Windows 8 with convenience store "Microsoft accounts"

  In this forum support is available for support hardware/software HP. I will provide better supported with your hardware/software of HP. If you need help with a software which is another provider, so I can re - direct you to reference appropriate at this time.

  I hope that you can mark these messages as solved, so that you can inspire others to follow your example with success. You never know who you can inspire.

  -How can I give Kudos? | How to mark a post as solved? --------------------------------------------------------

• With tunnel VPN ASA5505 problem

  The business needs is for a VLAN again on site to go directly back to an internet service to site B.

  Site A and B are connected by a service of WES MB 100.

  A site is a site of campus with about 25 switches. Him become VLAN on the site is for the engineer access only, so they can access their companys remote access service. This VLAN must stay back so there is very little potential of a trade-off on the live network.

  The solution that I just put in place is to place an ASA5505 as the dhcp server for him VLAN become to Site A. All clients on that VLAN become get a 192.168.100.x address. The external interface on the ASA5505 to Site A is put on the live network to allow a site VPN tunnel to be put in place between the ASA5505 and the Internet - an another ASA5505 firewall

  The Site A ASA5505 was put in place with inside and outside interfaces with the same level of security. 192.168.100.x subnet is exempt from NAT. Traffic is configured to transmit via the interfaces with the same level of security and the tunnel of L2L is coming.

  But I can not all connectivity to the internet from any host on the 192.168.100.x VLAN.

  This is made more complex because the external interfaces on both of the ASA are the corporate network...

  The default route to the Site B ASA5505 is 87.xx.xx.1, the ISP router.

  The Site B ASA5505 connects directly to the ISP router.

  Site has ASA5505

  --------------------

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.0 any

  Access access-list ON scope ip 192.168.100.0 allow 255.255.255.0 any

  NAT (inside) - access list 0 no - nat

  Access-Group No. - nat inside interface

  Route outside 0.0.0.0 0.0.0.0 10.0.99.254 1

  Crypto ipsec transform-set AES-256 aes-256-esp esp-sha-hmac

  vpn-traffic 10 crypto card matches the address OUT access

  card crypto vpn-traffic 10 peers set ##Site B IP address #.

  card crypto vpn-traffic 10 game of transformation-AES-256

  vpn-traffic outside crypto map interface

  tunnel-group ##Site B IP address # type ipsec-l2l

  tunnel-group ##Site B IP address # ipsec - attributes

  pre-shared-key *.

  Site B ASA5505

  -------------------

  permit same-security-traffic intra-interface

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.240 all

  outside_access_in of access allowed any ip an extended list

  Global (inside) 1 interface

  NAT (inside) - access list 0 no - nat

  NAT (outside) 1 192.168.100.0 255.255.255.0

  Access-Group No. - nat inside interface

  Access-group outside_access_in in interface outside

  Crypto ipsec transform-set AES-256 aes-256-esp esp-sha-hmac

  Crypto ipsec transform-set esp-aes-256 set1, esp-sha-hmac

  card crypto vpn-traffic 10 correspondence address wootton hall

  card crypto vpn-traffic 10 peers set ##Site an IP #.

  crypto-vpn 10 transform-set set1 traffic map

  vpn-traffic outside crypto map interface

  I spent some time on it and really need some advice form experts out there!

  Can you help me to know where I have gone wrong?

  Dan

  There are some parts of the configuration that you have published to that surprise me, such as the assignment of the default route on the inside interface. But these things are not at the heart of your problem. I agree that the core of your problem is probably the sheep access list. If I understand your needs, what you need is 192.168.100.0 is not translated by going to meets B, and is translated by going to the Internet. But your translation says access list never 192.168.100.0 since your access list as another destination:

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.0 any

  My suggestion is to rewrite this access list and change the destination of the 'all' to be addresses behind B (LAN to B).

  HTH

  Rick

• Stream in multicast TCS without SNS

  Hi all

  We have just instaled a TCS without any other server SN ory MXE3500, only TCS.

  Now, I tried to configure the setting of multicast on the TCS.

  My question is the exact configuration to enable a multicast on the TCS stream.

  1. I created a new server with only multicast enable media and have also before on Windows Server creates a new Publishing Point

  What I am now mising is the Point in the Administrator's Guide, I'm must run the "multicast announcements Assistant" is that right to run this wizard?

  If don't have any run this wizard and after that also saw in this folder IIS services manager * *.nsc was created.

  When to open the url http://1.1.1.1/test.nsc Windows Media Player attempts to load, but Iafter awhile I am getting an error (cannot read the file)

  I have also sniffing with Wireshark and see that I receive the Multicast stream, I configured my PC into the Publshing Point, to do a request for membership to the specific group (which seems to be that the network is correctly configured).

  Interesting is, for me, what coud be wrong.

  We have n SW Version 5.3 build TCS-3316

  Any help much appreciated.

  Concerning

  Georg

  Georg,

  This works for Mulricast and unicast streams, but make sure you of that multicast is enabled on your network.

  Create Point to publish multicast on the TCS server, once created, configure the multicast IP address and port and make sure multicast is enabled on the publishing point.  You don't need to run the wizard announcement.

  Next to configure TCS to use Publishing Points.  Configure the multimedia server, a model under the recording/Management Configuration and an alias record.  This will bind the Point to publish create on behalf of the H.323/SIP event used to start the process of event recording/Live TCS.

  Once everything is set up the component the CHT by using the H.323/SIP name will launch a live multicast event.  The event can be see at http://IPTCS/tcs/data / _Point publish.nsc Note that there is an underscore before the name of the Publishing Point and the name is sensitive to case.

  Hope this helps

  John

• VCS FindMe vs TMS FindMe

  Ladies and gentlemen,

  I have integrated our VCS (including management FindMe) in terms of a TMS, but subsequently in the VCS > status > Application > menu user Lync State I see the CMRS only, but not the end points recorded.
  I have several questions:

  1. How can I configure the TMS to publish endpoints of telepresence as an account FindMe (to see them as a registered Lync client)
  2. Currently all CMR have the status offline, is it possible to change their default online status?
  3. Finally: How can I restore the FindMe management to VCS of the TMS. In the latter case, I would be happy if I could put in place.

  Thank you
  Laszlo

  You can use TMSPE for a variety of uses, such as the provision of devices, FindMe, Collaboration meeting rooms, etc.  In your case, you use it to FindMe and CMR.

  Under Provisioning > users, manually create or import AD users and assign them a 'video address model. "  The boss of the address of the video will be their address FindMe and them will automatically create a FindMe account for each user in Provisioning > FindMe where all you have to do is to create associated device addresses, and locations, etc. that will connect to the address the user FindMe.

  The menu devices is for devices implemented and can be ignored in your case because you are not provisioning all devices through the VCS.

• How to review the Match deduplicate processor?

  I am runing a deduplicate processor, but when the process is complete, the results of the view and other test links are not turn on, even when there are has cases awaiting review. I could set up wrong?

  How can another question, I configure this processor to publish results from the review of Match? Thanks for your help.

  

  Hi Daniel,.

  You must select "Game Review" review system in the Advanced Options.

  Kind regards

  Nick

• PGB CLI 6.0.0 - .aspx package does not pass Windows validation dashboard developer

  There is also a related post on the forum community phonegap, but insofar as no solution. That's why I write it here as well, because at the time our deployment in the Windows store is pending.

  We will have a problem when you use CLI 6.0.0 on phonegap build. The build works very well without any problems, but when we download the .aspx package in the dev.windows.com dashboard, the following errors are given (some content are vetted with *):

  Invalid package name identity: 4974de88-* (expected: *)

  Invalid package name: 4974de88-* _ * (expected: *)

  Invalid package Publisher name: CN = OrangeMason BV (expected: CN = *)

  This package uses a display name that you have not reserved: *.

  As far as I know, phonegap build do not specify the name of the identity, the family name, the name of the editor and display the name of anywhere? Or is it possible that we can define these in the config.xml file so that they are treated properly in the package?

  If not, does support for this will be added in the future or how the Phonegap crew we publish our application in the Windows store otherwise wait?

  By the way: when you use CLI older versions (which exports .xap), this problem does not occur. However, these CLI versions do not support Windows Phone 10.

  Thank you for this comment. We have deployed a couple of bugs, here's how you need to configure your application:

  Publisher name: will be set to what you have set the field in the config.xml file

  Full name: will be what you have set the field in the config.xml file

  Identity package name: added a new preference: windows-identity-name. get this App--> App Identity management value in the Dev Center

  Package name: must be generated based on the name of the identity

  Yes, as long as you have your Publisher on man ID and follows the correct values in your config.xml (sample below values) file:

  Adobe
  PhoneGap Build App
  
  

  presentation should be successful. Let us know if you still see errors.

• Submit an application to build a VM vCAC 6.0, but error

  Dear members of VMware:

  
  

  I use the following to lab to the office:

  
  

  1 VMware identity device - 2.0.0.0 build 1445146

  2 VMware appliance - 6.0.0.0 vCAC build 1445145

  3. Windows 2008 R2 SP1 for server Iaas

  
  

  Everything is good, the installation and configuration to identify Appliance, vCAC device and

  IaaS components on Windows 2008 R2 SP1 are all successfully.

  
  

  The configuration of the infrastructure, fabric configuration, creating plans and published items adding

  service catalog are OK, but when I used the service catalog to deploy the virtual machine in vCenter, I

  always been mistakes, and the next is the vCAC error logs when using the Admin Infra

  > > > Home page > Infrastructure > surveillance > Log

  
  

  Unable to set the custom property owner VRM on the VM lab-vcac-015. vSphere error: a specified parameter was not correct. key.

  Unable to set the custom property vrmManagedMachine on the virtual machine, lab-vcac-015. vSphere error: a specified parameter was not correct. key.

  The treatment [CustomizeVM], error details error: Index was outside the bounds of the array. The stack trace is as below:
  

  
  

  at DynamicOps.Vrm.Agent.vSphere.VSphereCloneRequest.GetCustomizationSpecItem (String customizationSpecInfoName) at DynamicOps.Vrm.Agent.vSphere.VSphereCustomizeRequest.ExecuteImpl () at DynamicOps.Vrm.Agent.vSphere.VSphereHypervisorServiceProvider.CustomizeVM (VSphereVirtualMachine machine, Boolean waitForCustomizationToComplete) at DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ExecuteVSphereHypervisorActionMethod (WorkItem workItem, PropertyBagHelper propertyBag, action Action 2) to DynamicOps.Vrm.Agent.vSphere.VSphereAgentService.ProcessWorkitem (WorkItem workItem, task of the chain, PropertyBagHelper propertyBag) at DynamicOps.Vrm.Agent.BaseAgent.ProcessWorkitem (WorkItem workItem)

  
  

  I don't have too many troubleshooting experience for these, it seemes to be is not so clear about what is happening.

  and search Google gets little help, too.

  
  

  Please would you kindly let me know how to fix it? Is there an option or method to get more verbose or

  Journal of significant errors for troubleshooting?

  
  

  Your response is much appreciated.

  
  

  Danny
  

  Hello Grant:

  Yes, that's the question "connection and access to the cusomtisation in vCenter plug when logged in as long as the account used for the end point of vCenter.

  the specifications of cusomtisation created by [email protected] in vCenter cannot not be read by the account used for the endpoint of VirtualCenter,

  after fixation, the problem is resolved.

  Thank you.

  Best regards

  Danny

• Save default vod application

  Hello!
  I am trying to record a video on demand VOD default FMS with a flash animation, I get this error: 'NetStream.Record.NoAccess '.

  I think that the problem is not in my code, but just to make sure, it is here:

  var mycam:Camera = Camera.getCamera();
  mycam.setMode(320,240,25);
  var myvid:Video = new Video(mycam.width,mycam.height);
  
  myvid.attachCamera(mycam);
  stage.addChild(myvid);
  
  var conn = new NetConnection();
  conn.connect("rtmp://192.168.1.104/vod");
  conn.addEventListener(NetStatusEvent.NET_STATUS, statHandler);
  
  function statHandler(event:NetStatusEvent) {
       if(event.info.code == "NetConnection.Connect.Success") {
            conn.addEventListener(AsyncErrorEvent.ASYNC_ERROR,function(){});
            var stream = new NetStream(conn);
            stream.client = new Object();
            stream.attachCamera(mycam);
            stream.publish("testrec","record");
       } else {
            trace("error in connect");
       }
  }
  

  So I want to ask what to do I need any configuration to use NetStream.publish ("xy", "record") on the server?

  I checked and the connection to the server is good.
  If I use live streaming, it's fine (of course in this case I use the direct application).
  It is perhaps a related problem of file system. I use windows permissions 7 and given everything for all users... still not working.

  I think it may be a problem of configuration of FMS.

  Hi Jumika,

  In case you want to record videos on the side server, you must first ensure that you are using FMIS (Flash Media Interactive server).

  If you already use it, then steps are:

  1. create a new application in the fms application directory.

  2. ensure that in fms.ini VHOST. APPSDIR points correctly to your default folder FMS application folder (for example C:/Program Files/Adobe/Flash Media Server 4/applications).

  3. now, you have to put a code on server side, if you want to record the Live lesson streaming, may you want to return the document to actionscript side server to see what all the API you want to use to create your application. A simple extract of such a code that records only the stream will look as follows:

  application.onPublish = {function (clientObj, streamObj)}

  myStream = Stream.get ('hello');

  mystream.onStatus = {function (info)}

  trace ("mystream onstatus:" + info.code);

  }

  myStream.record ();

  myStream.Play (streamObj.Name);

  }

  application.onUnpublish = {function (clientObj, streamObj)}

  myStream.record (false);

  }

  4. After this restart the server and then try to publish OUT, you'd be able to save your request, otherwise let me know if you face difficulties.

• Server Stream.play () and original put edge up

  I'm stuck getting a call from Stream.play () on a saved video file (.flv) of origin in edge servers.  Don't even know if it's possible.

  If I call Stream.play () on a server and connect a viewer directly to that server, the viewer sees the flow of play.  If I call Stream.play () on the original server and connect a viewer for the stream edge server is not.

  Is it possible to set up in any way as the play() call to spread of edge servers?

  According to FMS 3.5 docs on the Stream class, here's the deal:

  «When you call Stream.play() on the server, the server becomes Publisher.»

  See 5e-7e42.html#WSF74EED77-5C4C-423d-B879-7C02DF8FEC5F http://help.Adobe.com/en_US/FlashMediaServer/3.5_SS_ASD/WS5b3ccc516d4fbf351e63e3d11a11afc9

  If this server becomes a publishing server and lets say it was an origin on a CDN server, should not the other machines in the configuration of receive the published stream?

  When you publish a live stream on an origin server does its way somehow to the edge server.  This analogy is not relevant to the scenario in which you call Stream.play () on a saved file?

  Thank you

  If your facility of edge and origin are works well in the way that they have been configured by NCR so all you have to do is to make sure (Stream.play) that happens on all origin servers that you would use. There is nothing else to do on Edge server.

  When a viewer connects to the edge server, it is routed to one of the original servers and would be able to underwrite the livestream served by the FMS app (via Stream.play ()).

  Thank you

  Mamata

• autoback SPFile with rman

  Why spfile is not be saved automatically? which need to be adjusted? I want to just delete my concepts.
  
  I have plenty, Comú & archlog & controlfile backups but no spfile, why
  
  
  RMAN > backup spfile list;
  
  using the control file of the target instead of recovery catalog database
  specification does not match the backups in the repository
  
  
  RMAN > show all.
  
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  
  Published by: user12001353 on August 30, 2010 13:15

  Did you do the backup of control like the AutoSave file?

  E:\Documents and Settings\aristadba>rman target /
  
  Recovery Manager: Release 11.2.0.1.0 - Production on Tue Aug 31 01:46:40 2010
  
  Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
  
  connected to target database: ORCL112 (DBID=3280541617, not open)
  RMAN> show controlfile autobackup;
  
  using target database control file instead of recovery catalog
  RMAN configuration parameters for database with db_unique_name ORCL112 are:
  CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
  
  RMAN> configure controlfile autobackup on;
  
  new RMAN configuration parameters:
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  new RMAN configuration parameters are successfully stored
  
  RMAN> backup spfile;
  
  Starting backup at 31-AUG-10
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID=18 device type=DISK
  channel ORA_DISK_1: starting full datafile backup set
  channel ORA_DISK_1: specifying datafile(s) in backup set
  including current SPFILE in backup set
  channel ORA_DISK_1: starting piece 1 at 31-AUG-10
  channel ORA_DISK_1: finished piece 1 at 31-AUG-10
  piece handle=D:\APP\ARISTADBA\FLASH_RECOVERY_AREA\ORCL112\BACKUPSET\2010_08_31\O1_MF_NNSNF_TAG20100831T014723_67R4GN3F_.BKP tag=TAG20100831T014723 comment=NONE
  channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
  Finished backup at 31-AUG-10
  
  Starting Control File and SPFILE Autobackup at 31-AUG-10
  piece handle=D:\APP\ARISTADBA\FLASH_RECOVERY_AREA\ORCL112\AUTOBACKUP\2010_08_31\O1_MF_S_728444778_67R4GOX9_.BKP comment=NONE
  Finished Control File and SPFILE Autobackup at 31-AUG-10
  
  RMAN> list backup of spfile;
  
  List of Backup Sets
  ===================
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  1       Full    80.00K     DISK        00:00:01     31-AUG-10
          BP Key: 1   Status: AVAILABLE  Compressed: NO  Tag: TAG20100831T014723
          Piece Name: D:\APP\ARISTADBA\FLASH_RECOVERY_AREA\ORCL112\BACKUPSET\2010_08_31\O1_MF_NNSNF_TAG20100831T014723_67R4GN3F_.BKP
    SPFILE Included: Modification time: 31-AUG-10
    SPFILE db_unique_name: ORCL112
  
  BS Key  Type LV Size       Device Type Elapsed Time Completion Time
  ------- ---- -- ---------- ----------- ------------ ---------------
  2       Full    9.36M      DISK        00:00:01     31-AUG-10
          BP Key: 2   Status: AVAILABLE  Compressed: NO  Tag: TAG20100831T014725
          Piece Name: D:\APP\ARISTADBA\FLASH_RECOVERY_AREA\ORCL112\AUTOBACKUP\2010_08_31\O1_MF_S_728444778_67R4GOX9_.BKP
    SPFILE Included: Modification time: 31-AUG-10
    SPFILE db_unique_name: ORCL112
  
  RMAN>
  

  HTH
  Aman...

• SWF directly to Internet Edition

  Hello world
  
  I was wondering if it is possible to implement a Flash file, so that when you export to SWF Flash format menu, he published the SWF file directly to internet (your folder preset on a particular folder for FTP). Anyone know if this is possible? It seems this would be a time saver, if you don't have to go through the step of downloading as well once you publish the SWF file.
  
  Thanks in advance for any answers.
  
  Your colleague Flash programmer,
  
  Karey Nickel
  Imagine it Digital

  Map a drive under Windows using folder FTP your FTP Folder Assistant and configure your project to publish files on this specific drive, you can also use or similar software to map a network/ftp drive on your local computer. WebDrive