Configure the resource manager

Similar Questions

• How to configure the UCS Manager?

  Hi, this is the first time im using the Cisco server and we have Cisco c240. My task now to monitor this server using SCOM. Research, I understand that it will take to install/configure the UCS Manager. But I'm not really sure how to set it up, I know it's similar with Dell OMSA, but for the OMSA, just install the application. But how do the Cisco server?

  Hello

  Although it is not clearly documented, integration SCOM is supported only for the blades of the series B and C-series rack mounts, which are integrated with UCS Manager. No support for stand-alone C-Series.

  Walter.

• Configure the network management grayed out in DCUI

  Configure the network management grayed out in DCUI and some other options are grayed out and network management IP is 0.0.0.0

  Seems that you have not any management VMkernel port or they may have been removed. You may need to check the same.

  Run esxcli list of network ip interface to check if there is no VMKernels.

  It does not generate re no output if NO vmkernel port is available.

  If no. VMkernel ports then follow the below to re-create the management VMkernel port group.

  esxcli network ip interface add-i = vmk0 Pei = "network management - M = 'MAC address' ' to create a VMKernel for management." Make sure the right to MAC address of the uplink is mentioned.

  And make sure that it is a unique vmk, does not correspond to a vmk existing (vmk0, vmk1, vmk2).

  Once the Port is created, you should be able to configure networking on the DCUI

  Hope it will be useful.

• How to see the a ditamap topicrefs nested in the resource manager?

  Hello

  I use 12 FM. I'm trying to move a document of 500 pages with several chapters in Dita 1.2. I use a ditamap by chapter. When I nest ditamaps under a main ditamap using maprefs, I do not see the topicrefs of each card. Also, the subjects are not displayed when the PDF is generated. How can I make all the topicrefs appear in the resource manager?

  Thank you

  Stéphane

  You do not see the topics in the section maps form the root card. When you open a map, you see the topicrefs for this card not the submaps. If you want to see the topicrefs, double-click the map reference and it will open the plan of the chapter. Maybe it's an interesting feature, but it doesn't currently work in this way. If you want to see all the topicrefs together, you will need to put them all in a single card.

  The issue of topics in submaps are not included when you generate a PDF file sounds like a bug (or you have something set wrong). You can try to change the maprefs to topicrefs. A mapref is really just a special type of topicref, and the build process cannot be put in place to manage maprefs.

  See you soon,.

  .. .Scott

• RH10: Excerpts from the Resource Manager display in search results

  I'm new to using Resource Manager, so there is a good chance I did something stupid here... but...

  I have 2 projects (I am the only author of technology, so running off a PC, any version control). I want to share snippets of code between projects, so I use the resource manager to keep them synchronized to the top. Both are compiled as CHMS.

  When I search, I get search results that appear to be the code snippets in the results. When you double-click on them, they do not open.

  Here is a screenshot of what I see.

  Has anyone else seen this before? I use RH10.

  I found it finally... somehow some of my clips appearing in the results of the research had found themselves in the baggage files. I had foolishly made express at some point in my project or not I have no idea. But the baggage of ditching apj file and replace it with a vacuum has solved the problem.

• The CPU used by the resource manager.

  Hello
  in 10g R2, I created a Plan for DBMS resources manager:

  EXEC DBMS_RESOURCE_MANAGER.CREATE_PENDING_AREA();
  
  EXEC DBMS_RESOURCE_MANAGER.CREATE_SIMPLE_PLAN(SIMPLE_PLAN => 'simple_plan1',CONSUMER_GROUP1 => 'mygroup1', GROUP1_CPU => 80,CONSUMER_GROUP2 => 'mygroup2', GROUP2_CPU => 20);
  
  
  ALTER SYSTEM SET RESOURCE_MANAGER_PLAN ='simple_plan1';
  
  
  
  EXEC DBMS_RESOURCE_MANAGER.SWITCH_CONSUMER_GROUP_FOR_USER ('SCOTT', 'MYGROUP2');
  EXEC DBMS_RESOURCE_MANAGER_PRIVS.GRANT_SWITCH_CONSUMER_GROUP ('SCOTT', 'MYGROUP2', TRUE);
  
  
  EXEC DBMS_RESOURCE_MANAGER.SUBMIT_PENDING_AREA;
  
  EXEC DBMS_RESOURCE_MANAGER.CLEAR_PENDING_AREA;

  Now, SCOTT runs the following (example from 24 through the database manager):

  DECLARE
  m NUMBER;
  BEGIN
  FOR i IN 1..100000 LOOP
  FOR j IN 1..100000 LOOP
  /*
  * The following query does a cartesian product without
  * a predicate and takes up significant CPU time.
  */
  select count(*) into m from v$sysstat, v$system_event;
  END LOOP;
  END LOOP;
  END;
  END;
  /

  And CPU use goes to 100%. Why? According to its consumer group should not only have 20% of CPU?
  
  No explanation?
  Thank you.

  Hello

  user522961 wrote:
  And CPU use goes to 100%. Why? According to its consumer group should not only have 20% of CPU?

  A quote from docs explained:

  The currently active resource plan does not have the limits of the allowance until the CPU usage is 100%. If the CPU usage is less than 100%, the database is not related to the CPU and there is therefore no need to enforce limits to ensure that all the sessions to get their allocation of designated resources.
  In addition, when the limits are applied, allowance unused by consumer groups can be used by other groups of consumers. In the previous example, if the SALES group does not use all of his allowance, the Resource Manager allows the group to MARKET or DEVELOP it group to use the unused allocation.

• How to configure the resource bundle to be referenced by the managed bean file?

  I have a class POJO that access a properties file in its constructor:
  
  public ConveroTaskFlowsMapping() {}
  resourceBundle = ResourceBundle.getBundle ("com.myapp.MyMappings");
  }
  
  The POJO class is used primarily by bean in session managed in the ViewController project. The "MyMappings.properties" was recorded in the corresponding source com/myapp path.
  
  The application works very well in integrated WLS.
  
  When I deploy the application to a standalone WLS 10.3.2, I got the following error when the bean has tried to access the properties file:
  
  JspServlet error: unable to send to the page requested following Servlet: the following exception occurred:javax.el.ELException: java.util.MissingResourceException: can't find bundle for database name
  com.myapp.MyMappings, settings regional en_US
  
  
  I've added what follows to faces - config.xml, but did not help to resolve the error
  
  <>resources-bundle
  < name-base > com.myapp.MyMappings < / base-name >
  myMappings < var > < / var >
  < / resource-bundle >
  
  What did I miss?

  Hi Priscilla,

  It works very well for us. That being said, you should not use ResourceBundle.getBundle ("com.myapp.MyMappings"); in your beans. You should rather inject the bundle name, so the "myMapping' in your example and use:

  FacesContext context = FacesContext.getCurrentInstance();
  Resourcebundle bundle = context.getApplication().getResourceBundle(context, "myMapping");
  

  This will allow you to declare your Packs in one place, the file faces - config.Xml.

  Kind regards

  ~ Simon

• Extend the AD schema and configure the connection manager

  Hello
  
  I tried to extend the schema and configure connection manager but without success.
  
  When I have the schema in ESSO Admin Console extension displays a success message, but when I check Active Directory for objects that must appear, non of them are there.
  
  Someone can explain to me please what im doing wrong, or give me a link where measures to extend and configure connection manager is explained?
  
  Thank you

  Make sure that the agent global settings (registry settings) for the two machines are the same. These settings define how the SSO client will include (as well as synchronize with the directory). If they appear identical, I would then check to ensure that the customer who does not have a typical AD synchronization (see Add/Remove Programs). If this still isn't your problem, check the DNS of your Inbox (this implies that your non-working client is joined to the domain and log you in as a domain user).

• How to download back in the resource manager human oracle

  Hello. can someone tell me how to download resume to the Director of human resources, as this can be done in free HR services.

  If you ask the subject to download resume in core HR; This can be done through the attachments feature.

  For more details, please see metalink note: * 76530.1*.

  Good luck

  Mohammad Al-Hourieh

• Sessions are not assigned correct consumer to the Resource Manager groups

  Hi all

  I have a number of consumer groups that I attributed to users:

  USERNAME INITIAL_RSRC_CONSUMER_GROUP

  ------------------------------ ------------------------------

  RM_BOGEY0 SYS_GROUP

  RM_BOGEY1 S/N

  RM_BOGEY3 DAAS_PLATINUM

  RM_BOGEY4 DAAS_GOLD

  RM_BOGEY5 DAAS_SILVER

  RM_BOGEY6 DAAS_BRONZE

  RM_BOGEY7 DAAS_LOW_PRI

  RM_BOGEY2 DEFAULT_CONSUMER_GROUP

  My understanding of the present, is when a user connects they are assigned to this group of consumers.

  However, this is not case.

  When the user connects they are attributed to OTHER_GROUPS

  SQL > SELECT SID, SERIAL #, USER name, the RESOURCE_CONSUMER_GROUP OF GV$ SESSION where RESOURCE_CONSUMER_GROUP! = USER name and "_ORACLE_BACKGROUND_GROUP_" like '% RM_BOGEY ';

  SID, SERIAL # USERNAME RESOURCE_CONSUMER_GROUP

  ---------- ---------- ------------------------------ --------------------------------

  RM_BOGEY5 3 499 OTHER_GROUPS

  RM_BOGEY6 196 295 OTHER_GROUPS

  RM_BOGEY0 197 433 OTHER_GROUPS

  RM_BOGEY7 294 883 OTHER_GROUPS

  RM_BOGEY1 868 189 OTHER_GROUPS

  1253 81 RM_BOGEY2 OTHER_GROUPS

  1351 25 RM_BOGEY3 OTHER_GROUPS

  1445 481 RM_BOGEY4 OTHER_GROUPS

  I can change consumer groups by running:

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY0", "SYS_GROUP");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY1", "S/N");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY3", "DAAS_PLATINUM");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY4", "DAAS_GOLD");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY5", "DAAS_SILVER");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY6", "DAAS_BRONZE");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY7", "DAAS_LOW_PRI");

  And then everything is as I expect to be, but I do not understand why the groups are not be correctly assigned at login?

  Any help is very appreciated

  Also it is a RAC, but I only connect via a node for now.

  Concerning

  G.

  Hi sb92075

  What you say is correct.

  Turns out that the problem was that I missed a step

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY0', 'SYS_GROUP', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY1', 'DBA', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY3', 'DAAS_PLATINUM', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY4', 'DAAS_GOLD', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY5', 'DAAS_SILVER', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY6', 'DAAS_BRONZE', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY7', 'DAAS_LOW_PRI', FALSE);

  It's working now

• Configuration for the Task Manager error

  Hello
  
  I installed FDQM, IR, FR, HFM in 11.1.1.3.
  
  FDQM configuration is successful. When you configure the Task Manager using the user name Windows account
  
  (Administrator). But it shows the status parameter not valid error. Once again, I tried with DCOM user admin also.
  
  It throws the same error.
  
  Thanks and Rgards,
  Sidhartha.p

  Try this:

  (A) start > run > services.msc
  (B) locate the FDM Hyperion Service Task Manager, right click and choose "Properties".
  (C) click the 'Connection' tab and enter the FDM Service account user name and password as - and apply.
  (D) try to start the service.

  It work?

• For windows 98 Resource Manager

  Hello

  I'm working on the restoration of material capacity old test using some spare disks.  I'm looking in the resource Configuration Manager, and I am puzzled.

  I'm looking in the resource manager is National Instruments MAX (Version 2.0.3.17).  What has intrigued me is that, under the 'devices and Intersfaces', I don't see any instrument listed under.  Windows hardware Manager, I would have two ISA Serial Port and a GPIB card (which is also ISA).

  MAX isn't supposed to list these instruments?  Do I need to add the instrument manually?

  And, is this version of resource manager works fine with Windows 98?

  Any help is appreciated!

  Thank you.

  Peggy

  Hi Peggy,

  If you have not all devices listed under "Devices and Interfaces", I suspect that you have not yet installed the drivers, or the device loader is not started.

  You have NEITHER-488. 2 (GPIB) and NI-VISA (serial ports) installed the drivers? You can find the drivers here , but you will have to go back a few pages to find drivers compatible with Windows 98.

  When you confirm that you have installed the drivers, I'll be happy to dig deeper with you. Thank you!

  Best,

• name of the resource programmatically

  I'm trying to get the name of the resource 'PXI1Slot2' PXI programmatically.

  How to get the handle whch viGetAttribute() object requires?

  viOpenDefaultRM (& rsrcHandle); Returns ViSession.

  Is there an attribute to get the number of accommodation?

  int CVICALLBACK FindResources (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  ViSession rsrcHandle;
  %%NumFound%% ViUInt32 shops.
  char InstrDescriptor [256];
  ViFindList MyFindList;
  int i;
  int chassis;

  switch (event)
  {
  case EVENT_COMMIT:

  First of all, log VISA.
  viOpenDefaultRM (& rsrcHandle);

  Now, to do an initial search. viFindRsrc returns the descriptor of instrument
  the first found instrument and the number of total resources found.
  viFindRsrc (rsrcHandle, "?") * PXI? * INSTR", & MyFindList, & %%numFound%% shops, InstrDescriptor);
  viGetAttribute (rsrcHandle, VI_ATTR_PXI_CHASSIS, frame);

  When you are finished, close the VISA session.
  viClose (rsrcHandle);

  break;
  }
  return 0;
  }

  According to the function panel, the object handle is a unique logical identifier for a session, list to find or event. So ViSession should be OK. But it seems that rsrcHandle is a session to the resource manager. You will need to use ViOpen to establish a connection with your device.

• Resources Manager, Plan window lack of column

  

  I'm facing a strange problem with the resource manager. Oracle 11.2 under oracle Linux 5.9.

  As you can see, the column 'value max' is missing in the menu of "regime".

  Any ideas where to look?

  Concerning
  Christian

  I think that OEM 11 g does not use %, made of 12 c

  Yo you will need to manually update the directive of the regime to put MAX_UTILIZATION_LIMIT

  see you soon

• limit of cpu resource manager problem

  Hello world

  I'm testing the resource limit of resource manager. in all the documents I read, after you create groups of consumers, if I gave a resource limit in terms of resources, it is said, this group of consumers won't be able to consume more cpu than that. for ex, 2 consumer group I have one of them gave 90% of cpu and the other (let's call it test_group) 5%, but when I connect with a user who is located in the test_group consumer group. After the execution of some sql/plsql, I noticed that it uses all the cpu.

  EDIT: to the fifth message there is all the code samples and the test results with screenshots.

  for ex in this page: http://pic.dhe.ibm.com/infocenter/mdm/v10r0m0/index.jsp?topic=%2Fcom.ibm.mdmhs.smpl.gd.doc%2Fr_oracle_db_resource_manager_working_example.html

  There is a code example that explain the plan. It is said REPORTING_GROUP is not being able to occupy more than 5% of CPU times in total. I used this code, but reporting_group always be able to consume all the cpu. I tested this code (also I have created a new group and the plan of Enterprise manager) on windows 7 64-bit, intel i7 cpu with 4 core and on the same machine, using the virtual machine oralinux. as database, Enterprise edition 11.2.0.1

  also resources plan is active and working, active session limit or cancel hen size for example, works when I tested it, but CPU limit is not. for testing I used the plsql code.

  create or replace function sf_test(p number) return number as
    x number;
  begin
    select 1 into x from sh.sales where prod_id = p and rownum = 1;
    return 1;
  exception
    when no_data_found then
      return 0;
  end;
  /
  
  
  declare
    x number;
  begin
    for i in 1..50 loop
      for i in 1..10000 loop
        x := sf_Test(i);
      end loop;
    end loop;
  end;
  
  

  I created four session of the Report1 user (in the link I mentioned before) and run this code plsql, at most 5% of cpu if they had but my CPU is overloaded almost every time.

  I missed something here or I got all wrong concept?

  PS: setting resource_limit is true and resouce_plan is the plan that I created. as I said before the plan is active and functional, I know, but may not limit the cpu. I would appreciate it if you help. Thank you very much.

  Looks like the resource manager behave correctly.

  If the session manager are not ask for 95 percent of the CPU resources, what remains will be the users of the report.  Oracle will not starve the UC report sessions if there are a bunch of CPU idle.

  If there are 8 Virtual cores and a bunch of single threaded sessions, you need at least 8 sessions before Manager the Manager could use 95% of the available CPU.  Most likely, you would need 9 or 10.

  If you have only a 6-wire Manager, these discussions could consume at least 6/8 = 75% of the available CPU but probably more than 67% (to pick a number that facilitates the calculation).  There is 33% of the CPU for the report.  There are 4 sessions of report in your screenshot with a little more than 2 cores available and each one seems to spend slightly more than 50% of their time on the CPU, which looks all right.

  Justin