The CPU used by the resource manager.

Similar Questions

• Configure the resource manager

  Hello everyone,

  I try to activate the resource manager in the workspace Business Configuration in order to to use in my projects.

  The State of the configuration is to inactivate. After putting and clicked OK, the status is always to inactivate and my changes have not been taken into account.

  You have a solution please?

  Thank you in advance!

  Thomas

  Try different types of browsers (IE or FF or CHROME), one of them works generally. If this is not the case, try to connect until system administrator (again try all 3 types of browser).

• How to see the a ditamap topicrefs nested in the resource manager?

  Hello

  I use 12 FM. I'm trying to move a document of 500 pages with several chapters in Dita 1.2. I use a ditamap by chapter. When I nest ditamaps under a main ditamap using maprefs, I do not see the topicrefs of each card. Also, the subjects are not displayed when the PDF is generated. How can I make all the topicrefs appear in the resource manager?

  Thank you

  Stéphane

  You do not see the topics in the section maps form the root card. When you open a map, you see the topicrefs for this card not the submaps. If you want to see the topicrefs, double-click the map reference and it will open the plan of the chapter. Maybe it's an interesting feature, but it doesn't currently work in this way. If you want to see all the topicrefs together, you will need to put them all in a single card.

  The issue of topics in submaps are not included when you generate a PDF file sounds like a bug (or you have something set wrong). You can try to change the maprefs to topicrefs. A mapref is really just a special type of topicref, and the build process cannot be put in place to manage maprefs.

  See you soon,.

  .. .Scott

• RH10: Excerpts from the Resource Manager display in search results

  I'm new to using Resource Manager, so there is a good chance I did something stupid here... but...

  I have 2 projects (I am the only author of technology, so running off a PC, any version control). I want to share snippets of code between projects, so I use the resource manager to keep them synchronized to the top. Both are compiled as CHMS.

  When I search, I get search results that appear to be the code snippets in the results. When you double-click on them, they do not open.

  Here is a screenshot of what I see.

  Has anyone else seen this before? I use RH10.

  I found it finally... somehow some of my clips appearing in the results of the research had found themselves in the baggage files. I had foolishly made express at some point in my project or not I have no idea. But the baggage of ditching apj file and replace it with a vacuum has solved the problem.

• How to download back in the resource manager human oracle

  Hello. can someone tell me how to download resume to the Director of human resources, as this can be done in free HR services.

  If you ask the subject to download resume in core HR; This can be done through the attachments feature.

  For more details, please see metalink note: * 76530.1*.

  Good luck

  Mohammad Al-Hourieh

• Sessions are not assigned correct consumer to the Resource Manager groups

  Hi all

  I have a number of consumer groups that I attributed to users:

  USERNAME INITIAL_RSRC_CONSUMER_GROUP

  ------------------------------ ------------------------------

  RM_BOGEY0 SYS_GROUP

  RM_BOGEY1 S/N

  RM_BOGEY3 DAAS_PLATINUM

  RM_BOGEY4 DAAS_GOLD

  RM_BOGEY5 DAAS_SILVER

  RM_BOGEY6 DAAS_BRONZE

  RM_BOGEY7 DAAS_LOW_PRI

  RM_BOGEY2 DEFAULT_CONSUMER_GROUP

  My understanding of the present, is when a user connects they are assigned to this group of consumers.

  However, this is not case.

  When the user connects they are attributed to OTHER_GROUPS

  SQL > SELECT SID, SERIAL #, USER name, the RESOURCE_CONSUMER_GROUP OF GV$ SESSION where RESOURCE_CONSUMER_GROUP! = USER name and "_ORACLE_BACKGROUND_GROUP_" like '% RM_BOGEY ';

  SID, SERIAL # USERNAME RESOURCE_CONSUMER_GROUP

  ---------- ---------- ------------------------------ --------------------------------

  RM_BOGEY5 3 499 OTHER_GROUPS

  RM_BOGEY6 196 295 OTHER_GROUPS

  RM_BOGEY0 197 433 OTHER_GROUPS

  RM_BOGEY7 294 883 OTHER_GROUPS

  RM_BOGEY1 868 189 OTHER_GROUPS

  1253 81 RM_BOGEY2 OTHER_GROUPS

  1351 25 RM_BOGEY3 OTHER_GROUPS

  1445 481 RM_BOGEY4 OTHER_GROUPS

  I can change consumer groups by running:

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY0", "SYS_GROUP");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY1", "S/N");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY3", "DAAS_PLATINUM");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY4", "DAAS_GOLD");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY5", "DAAS_SILVER");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY6", "DAAS_BRONZE");

  exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY7", "DAAS_LOW_PRI");

  And then everything is as I expect to be, but I do not understand why the groups are not be correctly assigned at login?

  Any help is very appreciated

  Also it is a RAC, but I only connect via a node for now.

  Concerning

  G.

  Hi sb92075

  What you say is correct.

  Turns out that the problem was that I missed a step

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY0', 'SYS_GROUP', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY1', 'DBA', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY3', 'DAAS_PLATINUM', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY4', 'DAAS_GOLD', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY5', 'DAAS_SILVER', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY6', 'DAAS_BRONZE', FALSE);

  exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY7', 'DAAS_LOW_PRI', FALSE);

  It's working now

• limit of cpu resource manager problem

  Hello world

  I'm testing the resource limit of resource manager. in all the documents I read, after you create groups of consumers, if I gave a resource limit in terms of resources, it is said, this group of consumers won't be able to consume more cpu than that. for ex, 2 consumer group I have one of them gave 90% of cpu and the other (let's call it test_group) 5%, but when I connect with a user who is located in the test_group consumer group. After the execution of some sql/plsql, I noticed that it uses all the cpu.

  EDIT: to the fifth message there is all the code samples and the test results with screenshots.

  for ex in this page: http://pic.dhe.ibm.com/infocenter/mdm/v10r0m0/index.jsp?topic=%2Fcom.ibm.mdmhs.smpl.gd.doc%2Fr_oracle_db_resource_manager_working_example.html

  There is a code example that explain the plan. It is said REPORTING_GROUP is not being able to occupy more than 5% of CPU times in total. I used this code, but reporting_group always be able to consume all the cpu. I tested this code (also I have created a new group and the plan of Enterprise manager) on windows 7 64-bit, intel i7 cpu with 4 core and on the same machine, using the virtual machine oralinux. as database, Enterprise edition 11.2.0.1

  also resources plan is active and working, active session limit or cancel hen size for example, works when I tested it, but CPU limit is not. for testing I used the plsql code.

  create or replace function sf_test(p number) return number as
    x number;
  begin
    select 1 into x from sh.sales where prod_id = p and rownum = 1;
    return 1;
  exception
    when no_data_found then
      return 0;
  end;
  /
  
  
  declare
    x number;
  begin
    for i in 1..50 loop
      for i in 1..10000 loop
        x := sf_Test(i);
      end loop;
    end loop;
  end;
  
  

  I created four session of the Report1 user (in the link I mentioned before) and run this code plsql, at most 5% of cpu if they had but my CPU is overloaded almost every time.

  I missed something here or I got all wrong concept?

  PS: setting resource_limit is true and resouce_plan is the plan that I created. as I said before the plan is active and functional, I know, but may not limit the cpu. I would appreciate it if you help. Thank you very much.

  Looks like the resource manager behave correctly.

  If the session manager are not ask for 95 percent of the CPU resources, what remains will be the users of the report.  Oracle will not starve the UC report sessions if there are a bunch of CPU idle.

  If there are 8 Virtual cores and a bunch of single threaded sessions, you need at least 8 sessions before Manager the Manager could use 95% of the available CPU.  Most likely, you would need 9 or 10.

  If you have only a 6-wire Manager, these discussions could consume at least 6/8 = 75% of the available CPU but probably more than 67% (to pick a number that facilitates the calculation).  There is 33% of the CPU for the report.  There are 4 sessions of report in your screenshot with a little more than 2 cores available and each one seems to spend slightly more than 50% of their time on the CPU, which looks all right.

  Justin

• name of the resource programmatically

  I'm trying to get the name of the resource 'PXI1Slot2' PXI programmatically.

  How to get the handle whch viGetAttribute() object requires?

  viOpenDefaultRM (& rsrcHandle); Returns ViSession.

  Is there an attribute to get the number of accommodation?

  int CVICALLBACK FindResources (int, int int event, control panel,
  void * callbackData, int eventData1, int eventData2)
  {
  ViSession rsrcHandle;
  %%NumFound%% ViUInt32 shops.
  char InstrDescriptor [256];
  ViFindList MyFindList;
  int i;
  int chassis;

  switch (event)
  {
  case EVENT_COMMIT:

  First of all, log VISA.
  viOpenDefaultRM (& rsrcHandle);

  Now, to do an initial search. viFindRsrc returns the descriptor of instrument
  the first found instrument and the number of total resources found.
  viFindRsrc (rsrcHandle, "?") * PXI? * INSTR", & MyFindList, & %%numFound%% shops, InstrDescriptor);
  viGetAttribute (rsrcHandle, VI_ATTR_PXI_CHASSIS, frame);

  When you are finished, close the VISA session.
  viClose (rsrcHandle);

  break;
  }
  return 0;
  }

  According to the function panel, the object handle is a unique logical identifier for a session, list to find or event. So ViSession should be OK. But it seems that rsrcHandle is a session to the resource manager. You will need to use ViOpen to establish a connection with your device.

• For windows 98 Resource Manager

  Hello

  I'm working on the restoration of material capacity old test using some spare disks.  I'm looking in the resource Configuration Manager, and I am puzzled.

  I'm looking in the resource manager is National Instruments MAX (Version 2.0.3.17).  What has intrigued me is that, under the 'devices and Intersfaces', I don't see any instrument listed under.  Windows hardware Manager, I would have two ISA Serial Port and a GPIB card (which is also ISA).

  MAX isn't supposed to list these instruments?  Do I need to add the instrument manually?

  And, is this version of resource manager works fine with Windows 98?

  Any help is appreciated!

  Thank you.

  Peggy

  Hi Peggy,

  If you have not all devices listed under "Devices and Interfaces", I suspect that you have not yet installed the drivers, or the device loader is not started.

  You have NEITHER-488. 2 (GPIB) and NI-VISA (serial ports) installed the drivers? You can find the drivers here , but you will have to go back a few pages to find drivers compatible with Windows 98.

  When you confirm that you have installed the drivers, I'll be happy to dig deeper with you. Thank you!

  Best,

• Resources Manager, Plan window lack of column

  

  I'm facing a strange problem with the resource manager. Oracle 11.2 under oracle Linux 5.9.

  As you can see, the column 'value max' is missing in the menu of "regime".

  Any ideas where to look?

  Concerning
  Christian

  I think that OEM 11 g does not use %, made of 12 c

  Yo you will need to manually update the directive of the regime to put MAX_UTILIZATION_LIMIT

  see you soon

• Command line and Resource Manager

  When you use the command line to compile a Robohelp project, is it possible to update the resources shared within the project before generation?

  For example, you have Project1 and uses snippet1 in this project. However, snippet1 has been changed in the Resource Manager (just say, for the sake of argument, that snippet1 is also used in Project2, and you changed the extract it and it synchronized to the Resource Manager). When you do a regular command line compilation, the extract is not updated.

  Is it possible to synchronize the excerpts and images from the resource manager in the project before proceeding with compiling from command line (other than opening the project and sync manually)? After all, if I have to open the project, there is no reason for the compilation command line since I was already there and can just compile the project.

  Thank you!

  I found a way around this!

  RoboHelp does not care if the files are updated through the application or through Windows Explorer (such as copying the latest file in the project folder).

  I created a simple batch file copies and replace any file that is older than the file that is located in the resource manager. This allows RoboHelp pull into the updated files in a command-line compilation. There is always a way!

  However, I found something problematic with the command line compilation. I started a new thread to ask about it.

  http://forums.Adobe.com/thread/1011261

• Resource Manager

  Hello
  on the 11g R2, how to see if the resource manager is enabled?
  Thank you.

  Please read doc links provided by Pavan above:

  By default, the resource manager is not enabled.

  The following statement in a text initialization parameter file enables the resource manager when starting the database and sets the top like mydb_plan plan.

  RESOURCE_MANAGER_PLAN = mydb_plan

  If you get an empty value of:

  SQL> show parameter resource_manager_plan;
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  resource_manager_plan                string
  SQL>
  

  means, you have not activated the resource plan, otherwise it displays the name of the resource manager plan.

  Or we can turn off? How?

  ALTER SYSTEM SET RESOURCE_MANAGER_PLAN = '';
  

  Concerning
  Girish Sharma

• Cloud control 12 c always available resource manager?

  Hello
  
  is the Manager of resources in Cloud control 12 c still available? The resource manager could be found in Grid Control 10 g database-> Administration tab.
  
  Rgds
  JH

  Yes, EM 12 c, you can navigate to the page "Get started with database Resource Manager" Resource Manager by selecting from the drop-down list of the Administration in a homepage of the database. I believe in 'EM 10g resources manager link is in the Server tab.

  Kind regards
  -Loc

• the Task Manager displays only the CPU resource monitor

  Using Ctrl-Alt-Del to bring up the Task Manager appears a little CPU resource monitor.

  .

  Can I fix without reinstalling Windows? Or should I just wait for Windows 8?

  Hello. Try to double-click the gray area (frame) in the resource monitor. Who could return to the version complete.

• Firefox, or the Profile Manager will start. In my task manager, the process uses 50% of my cpu but does nothing. I like browsing with firefox, how do I fix?

  I tried to restart my computer, the I tried to uninstall and reinstall uninstall, delete all files of firefox and folders, then reboot and then reinstall. Also, I tried to open the Profile Manager to edit my profile. After you have reinstalled several times and try to open the Profile Manager before launching firef0x, I got the firefox crashed window and the process in the Task Manager always uses 50% of my cpu. The most recent strike and then re - download gives me an error "the file is corrupt" and will not even install the program.

  Kill the process that you see, including any plugincontainer.exe, only once firefox has stopped running don't try to update.

  Completely unexpected instances of firefox running can sometimes be the result of malware activity.