Configure the skin to collapse, rather than hide them, nav pane help

Similar Questions

• With the help of the volume envelope of the clip to amplify rather than mitigate them

  Hello world

  I tried to modify the envelope of volume of a clip in multitrack view, and I realized that the envelope volume really only allows of * mitigate * the volume of a clip throughout its duration, not * amplify * it. In other words, you can only add points on the envelope that are * sub * la + 0 dB line, which reduces the volume of so - many dB.

  Is there a way also vary the volume of a clip in the other direction, that is to amplify, in multitrack view?

  Thanks a lot for your suggestions!

  Probably because it's the limit defined by Adobe for this operation. If you need more than that, then probably you increase permanently the level of the file in the editing view.

  It seems, however, a workaround solution. If you have resized the clip to the maximum envelope, you right click and open the properties of the Clip, you will see that hearing has set the Volume of the Clip on the max of + 15dB. If you reset the fader on the 0 level, you can then go and resize the envelopes again. This can allow you to get the gain, you need. But, as mentioned above, if your levels are too low, in the first place, I would increase the level of the file permanently in the edit view.

• From LR6.1 to LR6.3: rename folders created are based on the date of importation rather than the date of shooting!

  I started using LR with version 2... My import workflow was even up to 6.1 and all my files are organized in the same way for more than 10 years.

  I went on LR6.2 given the changes made in the import dialog. But upgraded to LR6.3 think the problem has been resolved.

  But now I noticed that all my photos are renamed and placed in folders corresponding to the date of importation rather than the date of shooting... I rename my files from custom and is gone in this dialogue, but has not as how to restore LR import my photos using the date of shooting. This creates havoc on my hard drives and in LR. I use the date of shooting a lot to find my photos, since I often neglect to add keywords.

  I really need to be able to get the date of shooting on the behalf of my photos and have copied them in the folder the correct date.

  Thanks in advance for your help.

  BTW: something has changed in the way the forum appears. Research is not very powerful... it has not brought something, yet I know that the import dialog has been at length when 6.2 was introduced. In addition, I see no browser passed a few more recent messages. I don't like the new interface.

  Well, I answered my own question. Yes, I was looking for settings in the destination Panel... There is a line that shows what would change the name... and it showed the date of importation as the new name... but actually... It was only to show you what the name change would look like. Because I had a selected image, I thought it would show that the change of name for this image. But it is not related to the image... The import worked as expected... My apologies for disturbing him. .

• Why should the user now manually select the toolbar as well as diapers and other tools rather than load them automatically?

  With the recent upgrade, I must now go to the Windows menu and manually select the toolbar as well as the layers and other tools rather than loading them automatically.

  is it a question of photoshop?

• Where can I download the full version of Creative Cloud trial? Rather than download them one by one

  Where can I download the full version of Creative Cloud trial? Rather than download them one by one

  There is not download the full version I know.  You download and install the Manager of funds and through that you install each program one

• Apple will turn please home sharing on with their Photos app rather than forcing them to use iCloud?

  Apple will turn please home sharing on with their Photos app rather than forcing them to use iCloud?

  I doubt it, but then I am a user like you, like everyone's here - Apple isn't here, but you can contact - http://www.apple.com/feedback/photos.html

  LN

• Update of today seems to have changed the interface for the bar of icons rather than a list search engine. Is there a way I can restore?

  I know everyone says that they 'hate' changes to the familiar interfaces in a first time before getting used to them, but I just personally don't like the look of the icon-tray in everything I use (it seems to overcome at least some of the usefulness of the Internet on a computer rather than on a mobile phone). I also kind of a lot of up there, search engines that not everything I can recognize immediately by icon. I know it's a minor inconvenience, but having to scroll on an icon to see the name of its search engine is quite annoying after being used to having a nice list that comes to tell you their names. Some way I can change it back to the old interface of the list?

  Open Subject: config (typed in the address bar) and turn this false preference

  browser.search.showOneOffButtons

  Then restart Firefox.

• How can I get the numbers read individually rather than a numeric value?

  I'm tagging a document for people with visual impairments and when the software reads the document it reads all the numbers in the form of value (i.e. 508 because five hundred eight rather than five zero eight). How to read numbers correctly?

  You can nest the sets of numbers within a Span tag and apply the ALT text. For example the sentence 'Section 508 Standards apply to electronic and information obtained by the federal government technology' could be labelled like this, with the Alt text "five zero eight" applied to the Span tag:

  
      Section
      
            508
      Standards apply to ...
  

• Reversed name appears in the index under 'Symbol' rather than 'A', 'B', 'C '...

  Hello

  I wrote a simple script that quickly adds a reference section and page (first level) to an index. It seemed to work OK, then I am ambitious and tried to write another script, this time one that reverses the order of a first name and family name where there is a space between them. But now, even if the name is duly reversed, it appears in the Index panel under 'symbol' rather than the first letter of the family name.

  I would be very grateful for any help.

  Thank you, Jeremy

  myDocument var = app.activeDocument;

  myIndex = myDocument.indexes.item var (0);

  var myMarker = app.selection [0];

  var myText = myMarker.contents;

  myDialog = app.dialogs.add var ({name: "Add entry index with the range at the end of the Document", canCancel:true});})

  {with (MyDialog)}

  {with (dialogColumns.add ())}

  var myTextEditField = textEditboxes.add ({minWidth, editContents:myText:200});})

  }

  }

  Ditto var = myDialog.show ();

  if(myResult == true) {}

  var myIndexTerm = myTextEditField.editContents;

  myDialog.destroy ();

  var myBreak = myIndexTerm.indexOf(' ');

  var mySurName = myIndexTerm.slice (myBreak);

  myFirstName var = myIndexTerm.slice (0, myBreak);

  var myReversedName = mySurName + ', ' + myFirstName;

  var myTopic = myIndex.topics.add (myReversedName);

  myTopic.pageReferences.add (myMarker, PageReferenceType.TO_END_OF_DOCUMENT);

  myTopic.name = myReversedName;

  }

  Jeremy,

  The contents of your myReversedName variable begins with a space: the problem is in this line:

  > var mySurName = myIndexTerm.slice (myBreak);

  He grabs the space between the first and last name. So, because your topic name starts with a space, it is placed in the section of symbol. Apparently, ID has a mechanism to correct this and removes the space when you click on the element. Instead, use this:

  > var mySurName = myIndexTerm.slice(myBreak+1);

  In addition, you can use GREP JavaScript to change the name and first name:

  > myReversedName = myIndexTerm.replace (/ ([^] +) (. +) /, "$2, $1");

  Peter

• How to the mozilla help page search engine AND my terms rather than OR them?

  Example: Search for 'failure of the log message timestamp' results with just the personal conditions. I tried ANDing them and surrounding quotation marks without success. I tried 'advanced search' without success.

  It is on the 'doing' list for the site, but currently, your best bet is to do a targeted search of Google. In other words:

  https://www.Google.com/search?q=message+log+timestamp+failure+site:support.Mozilla.com

  P.S. There is an advanced search, but it has the same problem.

• How to reference a. CHM file rather than copy them into a merged project?

  Hello! I'm new posting. Projects merged CHM files. You may recognize this picture:

  

  When I go to assign one (in my case) an existing merger of the project a new . CHM file, I'm presented with this dialog box. However, I do not want the. CHM file can be completely copied in, I want that it reference a. CHM file. It's because I'm working on an aid project that compiles several other aid projects that get changed separately from time to time. This leaves the project compilation obsolete if the. CHM files are simply copied to; they're just old copies.

  Is it possible to have a merged project point to one. File CHM rather than copy it in so that it reflects the external changes to the. CHM file?

  Thank you!

  Here's the vid. My apologies for the length. It's about 10 minutes long.

  YouTube

  Let me know if it helps... Rick

• Why was able to copy the file "test server" rather than "remote server"?

  Windows 7, Dreamweaver CS5 (v11.0)

  Until very recently, the operation Put copied the file on the remote server. Now it copies on the test server. I would like to change it to copy it to the remote server.

  Thank you, David. Yes, the configuration is correct.

  I stumbled upon the resolution. The icon of the right on the line Get and Put is "Expand to show local and...'." Click on this icon and then click on the 'Remote server' icon, which modifies the list of remote files files. If you want to see the files of tests, click the "Test Server".

• Is it possible to display a product as "sold" out on my site, rather than hide when out of stock?

  Hello

  I'm hoping to find a way to show a product as "sold" out on my site - as I put in place today, the product will be hidden when the inventory is zero. Or, I can not leave it hidden, but then there is no indication that the product is sold in the catalog or in the product list. Is it possible that I can have something that says 'SOLD OUT' appears instead, in the catalogue and in the list of the individual products?

  Thanks for your help!

  best,

  Jessica

  You should in fact no javascript code at all.

  Whether a change of background image or a picture of absolute positioning with z-index higher then the other elements in the provision of small and large presentation of the product...

  If you create the image and have that hidden by default. In the element)

  packaging for example) the content of the whole product page layouts you add class = 'stock {tag_instock}' and when it becomes stock-0 then you can view the out of stock message.

  With what you can also do options such as Hide read more or buy button/link you have in your design and the out of stock message/image see the instead...

  Lots of options and just CSS.

• My home page is MY MSN and when I go to a certain article and I am in fact and that the browser goes back to the top of the page MY MSN rather than where I left

  If I'm browsing subjects on my homepage and find one that reads my interest, I click on it and the browser goes on this site for me to read. When I'm through with that I hit the back button and on most Web sites, the original page back to where you were before you click on the interesting element. Not MY MSN, which is my home page, it returns to the top of MY MSN, which is irritating, especially if the elements that interest me are a group at the bottom of page on MY MSN and I want to read every 5 or 6 of them. How can I get the browser to return to the place I left?

  Try to open the "statutes" in a new tab, and when finished read each article close the tab I hope the MY MSN page original will maintain the position you left it to (unless this page has an automatic refresh frequency, to add new items to the list).

• can I have FF show the passwords I type rather than just asterisks?

  I am the only user of my machine, and I would like to as passwords is displayed when I or FF clap. Instead of just asterisks, then I show the password as the username.

  Look at this extension:

  • Display the passwords: https://addons.mozilla.org/firefox/addon/unhide-passwords/