Why was able to copy the file "test server" rather than "remote server"?

Similar Questions

• When I download something on the Web, the "Downloads" window opens, but that the window remains empty. Before it used to show at least the name of the file and I was able to open the file in the "Downloads" window Is it possible to recover this feature?

  I am running Windows XP that is updated to the latest version (which I think could be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine, so most of the stuff I download comes through sites found through Google, which is also updated.

  At some point in the past (there are maybe a few versions) when I want to download a file from the Internet, the "downloads" window opens and in the window would display the name of the file I got was download or came from download. I think I used to be able to then click on the file name and opens the file (or the Setup file if necessary to launch the new program). I am currently using Firefox 5.0 (screen "On Firefox" said that it is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it has always in the past, but it remains empty, that is, nothing is displayed in the download area. I don't remember to make configuration changes, etc., that may have caused the window to remain a Virgin, but I could be wrong. I know how to find the items I downloaded (My Documents / downloads) and can generally guess what might be the name of the downloaded file, but it was much easier when something (anything) appeared in the downloads window.

  I'd like someone to tell me about a simple solution for this. I'm ready to be pretty embarrassed that I did something I should not have.

  In the Firefox Options / confidentiality be sure 'Remember download history"is checked. To see all the options on this Panel, "Firefox will be" must be set to "use the custom settings for history".

  To find your OS information, on your Windows desktop, right-click on the icon my computer, choose Properties, this little window is info on your operating system.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• "You do not have permissions to access this folder" after copying the files on server 2012R2

  Recently, I've copied the 600GO files and folders using Robocopy from 2003 to 2012R2. No problem with the copy, but the properties of the root of the copied files showed a number of size and file incorrect directory to the same directory on Server 2003.

  Pursuit of the investigation, it seems that even if I am in a group of security on all files (with full control), I can't navigate some of them. When I select some files, I get a popup saying "you don't have permissions to access this folder." If I click on the "Continue" button, I also have access to the folder.

  When I check the permissions applied to the folder, it shows my group listed (with full control in the source files) and now added my user account security and given full control permissions.

  Anyone can shed light on what is happening here?

  To answer my own question, I just find some information about it and it is linked to the good old UAC.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/9061bc1c-42EA-47ed-8c7d-56b07139fb86/you-don ' t-currently-have-permission-to-access-this-folder-click-continue-to-permanently-get-access?forum=winservergen

• Copy the files along with folders

  Hi Forum!

  I have this little script to copy files which is located in the folder.

  My request of forum, is to get help, to copy all the content in the folder...

  contained in the record, may be *.indd, * .zip, *. TIF, *.eps, etc., and also the files in the folders and its contents..

  Currently, I can only able to copy only the files (*. *) in the folder and can not able to copy the file in the folder and its files...

  var copyFolder1 = file ('/ users/admin/Desktop/LZW/For General');

  var pasteFolder1 = Folder('/Volumes/CTC/Normal/MyFiles');

  var myFiles2 = copyFolder1.getFiles ("*.") *") ;

  for (i = myFiles2.length - 1; i > = 0; i--) {}

  Ditto var = myFiles2 [i] corresponding (pasteFolder1 + "/" + myFiles2 [i] .name);

  }

  Please can I get help to do this.

  Thanks & rgs.

  Just change the first line to choose the correct folders.

  copyFolder(new Folder("C:/Source Folder"), new Folder("C:/Destination Folder"));
  
  function copyFolder(sourceFolder, destinationFolder) {
      var sourceChildrenArr = sourceFolder.getFiles();
      for (var i = 0; i < sourceChildrenArr.length; i++) {
          var sourceChild = sourceChildrenArr[i];
          var destinationChildStr = destinationFolder.fsName + "/" + sourceChild.name;
          if (sourceChild instanceof File) {
              copyFile(sourceChild, new File(destinationChildStr));
          }
          else {
              copyFolder(sourceChild, new Folder(destinationChildStr));
          }
      }
  }
  
  function copyFile(sourceFile, destinationFile) {
      createFolder(destinationFile.parent);
      sourceFile.copy(destinationFile);
  }
  
  function createFolder(folder) {
      if (folder.parent !== null && !folder.parent.exists) {
          createFolder(folder.parent);
      }
      folder.create();
  }
  

• My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  My computer crashed while I was able to cancel the registration of my copy of Windows 7. I would like to move to my laptop. What should I do for this (a number to call, etc.) Thank you!

  Jut a little word. If it is a retail version of Windows 7, you should be OK, but if it's a version of Windows 7 OEM then the license died when the machine does.

• As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

  As a plug-in?  I have problems with an editable IRS form.   It gives me "Access denied" and then opens the file as an editable file.  I was able to open the form in the library.

  I found a few other questions on this forum who have remained unanswered.   I found a site citing the problem for drive X - I use XI.

  Change to drive XI.   Perhaps the reader at the library had this as its default setting.

  1. In Adobe Reader, clear the check box enable the Mode protected at startup :
     • If you have a PDF open, right-click the document, and then click Page Display Preferences.
     • If you open Adobe Reader from the shortcut, click on Edit > Preferences.
  2. In the categories dialog box Preferences pane, click (enhanced) protection, and then clear the box enable the Mode protected at startup .
  3. Close and reopen Reader.

  I have no idea if that setting has been changed in my XI player since I used this version exactly one year ago.

• ENVY of HP dv7: copy the file fails error on disk 2 to 58% HP recovery

  My hard drive in my dv7 ENVY dies for the second time in two years (it was under warranty last time and I was able to fix). I bought the hard drive same exact (Samsung, 1 TB), tested in BIOS, past everything. When I try to make the image recovery with the HP recovery discs I received the last time my hard drive died, I get an error then that 58% on two recovery disc that says:

  Reducer

  Copy the file fails

  From: d:\preload\base24. STORMWATER MANAGEMENT

  To: c:\RM\Image\BASE24. STORMWATER MANAGEMENT

  Press OK to retry.

  I press OK and it does the same thing over and over again. People who questioned him on this same type of error seem to get anywhere here, but what choice do I have? The hard drive is the same size, same manufacturer, same model, it should have the question of reimage the system on a hard drive more small, right?

  Am I just out of luck on that? So frustrated.

  englejas

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on recovery issues and wanted to help.
  
  Here is the link to the tool of creation of win8.1 media: installation media to create for Windows - 8.1 help Windows

  Understand, however, you might encounter a problem installing using the media created from this tool.

  You have a version of OEM HP of Win8 installed on your PC, and this means that the product key that is embedded in the motherboard UEFI firmware is OEM, not retail.

  While the media created from this tool SHOULD be activated using this key, there is no guarantee he will do.  If it is not the case, you can use this tool to recover your product key and try to enter it manually: Download Windows OEM Product Key Tool - MajorGeeks

  IF it still does not work, then your only recourse would be to order a new set of recovery from HP discs.

  You can look online for recovery from the paged media related: http://support.hp.com/us-en/drivers
  
  Once there, enter your product name or number. On your software page and download the drivers, select your operating system and version. Click on "Update".  If the HP recovery support is available for your computer, down near the bottom of the page, you will see an entry for the command Recovery Media-CD/DVD/USB. Click on the symbol '+' to expand this entty and click on order to press for more details.
  
  Or, if you prefer, you can do the same by contacting HP Customer Service:
  
  If you live in the United States or the Canada, details are on this page: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  If you live elsewhere, contact details are on this page: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
  
  NOTE: once you get through, stay on the line until you are finally able to talk to someone ' one - it can take a while!

  However, HP customer care is generally not available on weekends, so you will have to wait until Monday to contact them.
  
  Good luck
  
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the symbol of the thumbs-up to the left of the answer key to say thank you.
  If my message solved your problem please click on "Accept as Solution" - to help others to find the solution.
  ========================================================================

• Copy the file fails the Windows 7 recovery discs sent hp

  I have tried to solve this problem for a month now and I'm at the end of my home.
  I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
  Reformat the hard drive windows partition - tick
  Copy of the files needed to restore the hard drive - tick
  And immediately as ending, this window appears:
  Reducer
  Copy the file fails
  From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
  To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
  Press OK to retry
  
  Three series of drives have the same come.
  What the hell is happening?
  I'm so sick of this.
  
  Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
  
  Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
  
  Aaaarrrrrgggghhhhh

  Hi Belj,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.

  Hope this will help.

  Thank you.

• I get an error "Setup cannot copy the file els.dll" during the installation of Service Pack 3.

  The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '

  Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.

  In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.

  Thanks for the reply!

• Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.

  Delay of the dialog 'Copy the file' when you drag a file to a folder that already contains.  The dialog box only appears when that I disconnect.  In fact this problem can seriously mislead the user. The file has been copied to or not? This is a serious shortcoming of the operating system.
  A similarly delayed dialog box is to join files on a send to the recipient of the message.

  What is the cause of the delay? Dialog boxes are not under other windows - they break on screen as I log out.

  When I drag AGAIN the same file in the same folder, then I get a message that "the action cannot be completed because the file is open in another program.  (No doubt the program who was trying to copy in the first attempt and waits for a response to the dialog box may not show me!)

  Hardware: Computer laptop Asus M70.  VISTA Ultimate with the latest patches.

  Lorien, thanks for your response.
  A lot of time and effort was exercised in an attempt to find out WHY. I wanted to not just fix the symptoms. It concerned me greatly as a basic function of the operating system does not work. He was not fit for purpose. In the end I found that a third-party application compromised of WINDOWS VISTA 32-bit operating system. If an operating system can not reliably inform the user that an operation is successful or not, it is worthless. In the case above, I didn't move the files was a success (no response required) or the delayed response until I signed.

  In addition to the original problem, there was the following problem: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/thread/24068518-31e0-4b23-823b-d54882792301 where "send to..." 'Recipient' disable the context menu in Explorer for JPG does not or not broken.

  Finally, I figured out the following error had something to do with my problems:

  Description:
  The server {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5} is not registered with DCOM within the required time.
  

  -

  -

   

   10010

   0

   2

   0

   0

   0 x 80000000000000

   

   198817

   

   

   System

   ASUS_M70VM

   

   

  -

   {AB8902B4-09CA-4BB6-B78D-A8F59079A8D5}

   

   

  Arriving in my solution, I was inspired by the following articles http://blogs.technet.com/markrussinovich/archive/2006/08/31/453100.aspx     http://blogs.technet.com/markrussinovich/archive/2006/11/27/532465.aspx
  So I downloaded the MS debug tools and confirmed my suspicion of dllhost.dll using REGEDIT to set debugging on that.
  To cut a long story short, it's DivX 7.2 which caused me grief.  In particular, the file DivXDecH264.ax 'has an access violation - code C0000005 (first chance).  It has been autonomous in DivX Plus DirectShow Filters.     Thus, when it has been deleted (starting other Articles to original install DivX) through Control Panel of configuration/programs and features my system worked perfectly well.

  I know SFA on the architecture of Windows but why was this DivX file loading and cause an access violation whenever I used the windows Explorer?  How an operating system may fail in a basic function of by a third party issue?  There are some newspaper where this access violation was recorded?  It was only possible to identify it in debugging?

  What you fella?

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• Portege M400: cannot copy the files on the disk HARD - can't see any of my files in Word

  I bought the M400 a few weeks ago. There are a number of problems. Adobe reader gives "an internal error has occurred", manual installation of download gives "error occurred in the file zip", download or copy of the files on the hard disk gives error "there is no space" when there are only 8 gig used from 60 GB. Now, I don't see any of my files in Word.

  I can also copy the files from the cd or DVD. I'm in canada mississauga on Horus, usually resident in the United Kingdom, so I'm in a precarious situation because I can't in my office to sort out the issues.

  Can someone advise me please why all these problems are happening, do I have to use the recovery disk? Baz

  > Forgive me but how to put the hard drive in business.

  I think that the Johnny means that you connect the HARD drive to another computer using the external USB HDD controller. These external USB HDD cases can be purchase in every store of the computer.

  However, if you n t need data that are placed on the HARD drive, you could simply start installing the OS from the recovery CD. This will format the whole HARD drive and install the new operating system as well as all the drivers, utilities and software further.

• Error message "unable to copy the file"hiberfil", it is used by another person or program." Problem copying content from your PC to external hard drive.

  Original title: problem to copy content from your PC to external hard drive.

  I use Windows XP 2000 and am trying to restore my pc to factory settings as it is continuously 'stick '. When you try to copy my drive "c" on an external drive I get a message saying "unable to copy the file"hiberfil", it is used by another person or program." Close any program that might be using the file and try again "." What is 'hiberfil' and how do I close it down as I am not aware that I use?

  Concerning

  Pete

  The hiberfil.sys will be created every time that you start... If you put in hibernation enabled in your control panel, Power Options and the file is 'open' to think that you can actually choose to Hibernate at any given time.  When you Hibernate XP gives a note of it and will write a hiberfil.sys sometimes important in the c:\ folder so that when XP fires again upwards and returns from hibernation, XP will read the hiberfil.sys file and return to the situation that you were in when you put into hibernation.

  I use to be a chronic hibernant because it takes less time to return after hibernation as a cold start.  Sometimes, it can actually be slower that a cold so start your system based on the amount of RAM has.  The more RAM you have, the more your hiberfil.sys will, if sometimes it's faster to move with just a cold start if you Hibernate (26,03 seconds for me).

  If hiberfil.sys is giving you a hard time (you would not in any way copy it) disable hibernation in your Power Options and the file will be deleted immediately since it would be is no longer necessary.  That would solve this, but if you are trying to copy the entire C drive, you will have other files to complain after that.

  It is certainly possible to make a complete copy of the C drive, if you want, but you will have to initialize on something next to your drive hard if you want to do this so the XP files are not used - then you can copy anything and everything.  You can get some imaging software of disc that will also help you.

  It depends on what the problem is you want to solve and what you wand to end up with when you're done (so far, unspecified).

  I would work on figure our why your XP is paste and fix it in place.  XP should not be sticky.

• Was able to do the system restore to get the programs & icons back but lost all my photos and my docs HELP!

  My blocked computer randomly getting error code Catalyst Control Center host application has encountered a problem then all icons and programs have disappeared was able to restore the system to work and all the programs and icons and background photo returmed but my docs and photos files are gone Please HELP!

  Just an idea that might be worth a try...

  Is it possible that your files are still there but have
  become hidden?

  Reach... Control Panel / folder Options / View tab.
  ... To check "Show the hidden files and folders" / apply / OK.

  Let us know if the files reappear.

• When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties

  I move the file from my old PC which took place with Vista on a new computer running with Win 10 where I have Windows Live Mail is installed.  When I try to copy the files from Windows Mail on Vista on a USB key I get the message "you are about to copy this file without its properties".  After studying this issue on the forums, a proposed solution was to reformat the drive in NTFS format, I did.  This does not solve the problem.  Any suggestions?  Would it be OK in this case to ignore the message and copy the file without its properties?

  Well data files/user of vista should work. Yes a NTFS format is good, go to run, or cmd, type:

  diskmgmt.msc in msc, R.click on the material, delete the partition, create one, format. Use the default settings,

  Once thru, L.click the disk, go to actions, all, select 'enable '.

  In addition, live windows for vista is microsoft discontinud